diff options
author | David Brownell <dbrownell@users.sourceforge.net> | 2009-12-01 21:47:45 -0800 |
---|---|---|
committer | David Brownell <dbrownell@users.sourceforge.net> | 2009-12-01 21:47:45 -0800 |
commit | 66ca84b58114ad73b5843f62f9f5fbead1126fca (patch) | |
tree | c154e6084a6ccc742d1ec8be002ffa187a8c61b5 /src/target/arm_dpm.c | |
parent | 1c7d3d200c6f20d4bb689176373368cd497d797f (diff) | |
download | riscv-openocd-66ca84b58114ad73b5843f62f9f5fbead1126fca.zip riscv-openocd-66ca84b58114ad73b5843f62f9f5fbead1126fca.tar.gz riscv-openocd-66ca84b58114ad73b5843f62f9f5fbead1126fca.tar.bz2 |
ARM: core DPM support for watchpoints
This is a NOP unless the underlying core exposes two new methods, and
neither of the two cores using this (ARM11xx, Cortex-A8) do so yet.
This patch only updates those cores so they pass a flag saying whether
or not to update breakpoint and watchpoint status before resuming; and
removing some now-needless anti-segfault code from ARM11. Cortex-A8
didn't have that code ... yes, it segfaulted when setting watchpoints.
NOTE: this uses a slightly different strategy for setting/clearing
breakpoints than the ARM7/ARM9/etc code uses. It leaves them alone
unless it's *got* to change something, to speed halt/resume cycles
(including single stepping).
ALSO NOTE: this under-delivers for Cortex-A8, where regions with size
up to 2 GBytes can be watched ... it handles watchpoints which ARM11 can
also handle (size 1/2/4 bytes). Should get fixed later.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'src/target/arm_dpm.c')
-rw-r--r-- | src/target/arm_dpm.c | 244 |
1 files changed, 242 insertions, 2 deletions
diff --git a/src/target/arm_dpm.c b/src/target/arm_dpm.c index 127f87b..f94fcc4 100644 --- a/src/target/arm_dpm.c +++ b/src/target/arm_dpm.c @@ -25,6 +25,8 @@ #include "arm_dpm.h" #include "jtag.h" #include "register.h" +#include "breakpoints.h" +#include "target_type.h" /** @@ -34,6 +36,8 @@ * implementation differences between cores like ARM1136 and Cortex-A8. */ +/*----------------------------------------------------------------------*/ + /* * Coprocessor support */ @@ -85,6 +89,8 @@ static int dpm_mcr(struct target *target, int cpnum, return retval; } +/*----------------------------------------------------------------------*/ + /* * Register access utilities */ @@ -178,7 +184,7 @@ static int dpm_write_reg(struct arm_dpm *dpm, struct reg *r, unsigned regnum) switch (regnum) { case 0 ... 14: - /* load register from DCC: "MCR p14, 0, Rnum, c0, c5, 0" */ + /* load register from DCC: "MRC p14, 0, Rnum, c0, c5, 0" */ retval = dpm->instr_write_data_dcc(dpm, ARMV4_5_MRC(14, 0, regnum, 0, 5, 0), value); @@ -256,6 +262,11 @@ int arm_dpm_read_current_registers(struct arm_dpm *dpm) /* NOTE: SPSR ignored (if it's even relevant). */ + /* REVISIT the debugger can trigger various exceptions. See the + * ARMv7A architecture spec, section C5.7, for more info about + * what defenses are needed; v6 debug has the most issues. + */ + fail: /* (void) */ dpm->finish(dpm); return retval; @@ -264,8 +275,11 @@ fail: /** * Writes all modified core registers for all processor modes. In normal * operation this is called on exit from halting debug state. + * + * @param bpwp: true ensures breakpoints and watchpoints are set, + * false ensures they are cleared */ -int arm_dpm_write_dirty_registers(struct arm_dpm *dpm) +int arm_dpm_write_dirty_registers(struct arm_dpm *dpm, bool bpwp) { struct arm *arm = dpm->arm; struct reg_cache *cache = arm->core_cache; @@ -276,6 +290,53 @@ int arm_dpm_write_dirty_registers(struct arm_dpm *dpm) if (retval != ERROR_OK) goto done; + /* enable/disable watchpoints */ + for (unsigned i = 0; i < dpm->nwp; i++) { + struct dpm_wp *dwp = dpm->dwp + i; + struct watchpoint *wp = dwp->wp; + bool disable; + + /* Avoid needless I/O ... leave watchpoints alone + * unless they're removed, or need updating because + * of single-stepping or running debugger code. + */ + if (!wp) { + if (!dwp->dirty) + continue; + dwp->dirty = false; + /* removed or startup; we must disable it */ + disable = true; + } else if (bpwp) { + if (!dwp->dirty) + continue; + /* disabled, but we must set it */ + dwp->dirty = disable = false; + wp->set = true; + } else { + if (!wp->set) + continue; + /* set, but we must temporarily disable it */ + dwp->dirty = disable = true; + wp->set = false; + } + + if (disable) + retval = dpm->bpwp_disable(dpm, 16 + i); + else + retval = dpm->bpwp_enable(dpm, 16 + i, + wp->address, dwp->control); + + if (retval != ERROR_OK) + LOG_ERROR("%s: can't %s HW watchpoint %d", + target_name(arm->target), + disable ? "disable" : "enable", + i); + } + + /* NOTE: writes to breakpoint and watchpoint registers might + * be queued, and need (efficient/batched) flushing later. + */ + /* Scan the registers until we find one that's both dirty and * eligible for flushing. Flush that and everything else that * shares the same core mode setting. Typically this won't @@ -399,6 +460,13 @@ static enum armv4_5_mode dpm_mapmode(struct arm *arm, return ARMV4_5_MODE_ANY; } + +/* + * Standard ARM register accessors ... there are three methods + * in "struct arm", to support individual read/write and bulk read + * of registers. + */ + static int arm_dpm_read_core_reg(struct target *target, struct reg *r, int regnum, enum armv4_5_mode mode) { @@ -544,9 +612,141 @@ done: return retval; } + +/*----------------------------------------------------------------------*/ + +/* + * Breakpoint and Watchpoint support. + * + * Hardware {break,watch}points are usually left active, to minimize + * debug entry/exit costs. When they are set or cleared, it's done in + * batches. Also, DPM-conformant hardware can update debug registers + * regardless of whether the CPU is running or halted ... though that + * fact isn't currently leveraged. + */ + +static int dpm_watchpoint_setup(struct arm_dpm *dpm, unsigned index, + struct watchpoint *wp) +{ + uint32_t addr = wp->address; + uint32_t control; + + /* this hardware doesn't support data value matching or masking */ + if (wp->value || wp->mask != ~(uint32_t)0) { + LOG_DEBUG("watchpoint values and masking not supported"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + } + + control = (1 << 0) /* enable */ + | (3 << 1); /* both user and privileged access */ + + switch (wp->rw) { + case WPT_READ: + control |= 1 << 3; + break; + case WPT_WRITE: + control |= 2 << 3; + break; + case WPT_ACCESS: + control |= 3 << 3; + break; + } + + /* Match 1, 2, or all 4 byte addresses in this word. + * + * FIXME: v7 hardware allows lengths up to 2 GB, and has eight + * byte address select bits. Support larger wp->length, if addr + * is suitably aligned. + */ + switch (wp->length) { + case 1: + control |= (1 << (addr & 3)) << 5; + addr &= ~3; + break; + case 2: + /* require 2-byte alignment */ + if (!(addr & 1)) { + control |= (3 << (addr & 2)) << 5; + break; + } + /* FALL THROUGH */ + case 4: + /* require 4-byte alignment */ + if (!(addr & 3)) { + control |= 0xf << 5; + break; + } + /* FALL THROUGH */ + default: + LOG_DEBUG("bad watchpoint length or alignment"); + return ERROR_INVALID_ARGUMENTS; + } + + /* other control bits: + * bits 9:12 == 0 ... only checking up to four byte addresses (v7 only) + * bits 15:14 == 0 ... both secure and nonsecure states (v6.1+ only) + * bit 20 == 0 ... not linked to a context ID + * bit 28:24 == 0 ... not ignoring N LSBs (v7 only) + */ + + dpm->dwp[index].wp = wp; + dpm->dwp[index].control = control; + dpm->dwp[index].dirty = true; + + /* hardware is updated in write_dirty_registers() */ + return ERROR_OK; +} + + +static int dpm_add_watchpoint(struct target *target, struct watchpoint *wp) +{ + struct arm *arm = target_to_arm(target); + struct arm_dpm *dpm = arm->dpm; + int retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + + if (dpm->bpwp_enable) { + for (unsigned i = 0; i < dpm->nwp; i++) { + if (!dpm->dwp[i].wp) { + retval = dpm_watchpoint_setup(dpm, i, wp); + break; + } + } + } + + return retval; +} + +static int dpm_remove_watchpoint(struct target *target, struct watchpoint *wp) +{ + struct arm *arm = target_to_arm(target); + struct arm_dpm *dpm = arm->dpm; + int retval = ERROR_INVALID_ARGUMENTS; + + for (unsigned i = 0; i < dpm->nwp; i++) { + if (dpm->dwp[i].wp == wp) { + dpm->dwp[i].wp = NULL; + dpm->dwp[i].dirty = true; + + /* hardware is updated in write_dirty_registers() */ + retval = ERROR_OK; + break; + } + } + + return retval; +} + +/*----------------------------------------------------------------------*/ + +/* + * Setup and management support. + */ + /** * Hooks up this DPM to its associated target; call only once. * Initially this only covers the register cache. + * + * Oh, and watchpoints. Yeah. */ int arm_dpm_setup(struct arm_dpm *dpm) { @@ -556,6 +756,7 @@ int arm_dpm_setup(struct arm_dpm *dpm) arm->dpm = dpm; + /* register access setup */ arm->full_context = arm_dpm_full_context; arm->read_core_reg = arm_dpm_read_core_reg; arm->write_core_reg = arm_dpm_write_core_reg; @@ -566,9 +767,48 @@ int arm_dpm_setup(struct arm_dpm *dpm) *register_get_last_cache_p(&target->reg_cache) = cache; + /* coprocessor access setup */ arm->mrc = dpm_mrc; arm->mcr = dpm_mcr; + /* breakpoint and watchpoint setup */ + target->type->add_watchpoint = dpm_add_watchpoint; + target->type->remove_watchpoint = dpm_remove_watchpoint; + + /* FIXME add breakpoint support */ + /* FIXME add vector catch support */ + + dpm->nbp = 1 + ((dpm->didr >> 24) & 0xf); + dpm->dbp = calloc(dpm->nbp, sizeof *dpm->dbp); + + dpm->nwp = 1 + ((dpm->didr >> 28) & 0xf); + dpm->dwp = calloc(dpm->nwp, sizeof *dpm->dwp); + + if (!dpm->dbp || !dpm->dwp) { + free(dpm->dbp); + free(dpm->dwp); + return ERROR_FAIL; + } + + /* Disable all breakpoints and watchpoints at startup. */ + if (dpm->bpwp_disable) { + unsigned i; + + for (i = 0; i < dpm->nbp; i++) + (void) dpm->bpwp_disable(dpm, i); + for (i = 0; i < dpm->nwp; i++) + (void) dpm->bpwp_disable(dpm, 16 + i); + } else + LOG_WARNING("%s: can't disable breakpoints and watchpoints", + target_name(target)); + + LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints", + target_name(target), dpm->nbp, dpm->nwp); + + /* REVISIT ... and some of those breakpoints could match + * execution context IDs... + */ + return ERROR_OK; } |