diff options
author | Robert Jordens <jordens@gmail.com> | 2017-08-08 18:16:35 +0200 |
---|---|---|
committer | Paul Fertser <fercerpav@gmail.com> | 2018-01-13 19:36:42 +0000 |
commit | 867bdb2e9248a974f7db0a99fbe5d2dd8b46d25d (patch) | |
tree | 75820956ecee2c80bd0210614e1e205dd5228c91 /src/flash | |
parent | 22ad1c0f6057aed642d5b1229b24e52dd26b1ec4 (diff) | |
download | riscv-openocd-867bdb2e9248a974f7db0a99fbe5d2dd8b46d25d.zip riscv-openocd-867bdb2e9248a974f7db0a99fbe5d2dd8b46d25d.tar.gz riscv-openocd-867bdb2e9248a974f7db0a99fbe5d2dd8b46d25d.tar.bz2 |
jtagspi: new protocol that includes transfer length
This commit contains a rewrite of the jtagspi protocol and covers both
changes in the jtagspi.c openocd driver and the bscan_spi
(xilinx_bscan_spi) proxy bitstreams. The changes are as follows:
1. Always perform IR scan to ensure proper clearing of BYPASSed DRs.
2. Insert alignment cycles for all BYPASSed TAPs:
The previous logic was erroneous. The delay in clock cyles from a bit
written to the jtag interface to a bit read by the jtag interface is:
* The number of BYPASSed TAPs before this (jtagspi) tap
* The length of the jtagspi data register (1)
* The number of BYPASSed TAPs before this one.
I.e. it is just the number of enabled TAPs. This also gets rid of the
configuration parameter DR_LENGTH.
3. Use marker bit to start spi transfer
If there are TAPs ahead of this one on the JTAG chain, and we are in
DR-SHIFT, there will be old bits toggled through first before the first
valid bit destined for the flash.
This delays the begin of the JTAGSPI transaction until the first high bit.
4. New jtagspi protocol
A JTAGSPI transfer now consists of:
* an arbitrary number of 0 bits (from BYPASS registers in front of the
JTAG2SPI DR)
* a marker bit (1) indicating the start of the JTAG2SPI transaction
* 32 bits (big endian) describing the length of the SPI transaction
* a number of SPI clock cycles (corresponding to 3.) with CS_N asserted
* an arbitrary number of cycles (to shift MISO/TDO data through
subsequent BYPASS registers)
5. xilinx_bscan_spi: clean up, add ultrascale
This is tested on the following configurations:
* KC705: XC7K325T
* Sayma AMC: XCKU040
* Sayma AMC + RTM): XCKU040 + XC7A15T, a board with integrated FTDI JTAG
adapter, SCANSTA JTAG router, a Xilinx Ultrascale XCKU040 and a Xilinx
Artix 7 15T. https://github.com/m-labs/sinara/wiki/Sayma
* Custom board with Lattice FPGA + XC7A35T
* CUstom board with 3x XCKU115-2FLVA1517E
Change-Id: I7361e9fb284ebb916302941735eebef3612aa103
Signed-off-by: Robert Jordens <jordens@gmail.com>
Reviewed-on: http://openocd.zylin.com/4236
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Diffstat (limited to 'src/flash')
-rw-r--r-- | src/flash/nor/jtagspi.c | 60 |
1 files changed, 41 insertions, 19 deletions
diff --git a/src/flash/nor/jtagspi.c b/src/flash/nor/jtagspi.c index a995fc7..a05ff37 100644 --- a/src/flash/nor/jtagspi.c +++ b/src/flash/nor/jtagspi.c @@ -32,14 +32,13 @@ struct jtagspi_flash_bank { const struct flash_device *dev; int probed; uint32_t ir; - uint32_t dr_len; }; FLASH_BANK_COMMAND_HANDLER(jtagspi_flash_bank_command) { struct jtagspi_flash_bank *info; - if (CMD_ARGC < 8) + if (CMD_ARGC < 7) return ERROR_COMMAND_SYNTAX_ERROR; info = malloc(sizeof(struct jtagspi_flash_bank)); @@ -52,7 +51,6 @@ FLASH_BANK_COMMAND_HANDLER(jtagspi_flash_bank_command) info->tap = NULL; info->probed = 0; COMMAND_PARSE_NUMBER(u32, CMD_ARGV[6], info->ir); - COMMAND_PARSE_NUMBER(u32, CMD_ARGV[7], info->dr_len); return ERROR_OK; } @@ -63,9 +61,6 @@ static void jtagspi_set_ir(struct flash_bank *bank) struct scan_field field; uint8_t buf[4]; - if (buf_get_u32(info->tap->cur_instr, 0, info->tap->ir_length) == info->ir) - return; - LOG_DEBUG("loading jtagspi ir"); buf_set_u32(buf, 0, info->tap->ir_length, info->ir); field.num_bits = info->tap->ir_length; @@ -84,28 +79,53 @@ static int jtagspi_cmd(struct flash_bank *bank, uint8_t cmd, uint32_t *addr, uint8_t *data, int len) { struct jtagspi_flash_bank *info = bank->driver_priv; - struct scan_field fields[3]; - uint8_t cmd_buf[4]; + struct scan_field fields[6]; + uint8_t marker = 1; + uint8_t xfer_bits_buf[4]; + uint8_t addr_buf[3]; uint8_t *data_buf; + uint32_t xfer_bits; int is_read, lenb, n; /* LOG_DEBUG("cmd=0x%02x len=%i", cmd, len); */ + is_read = (len < 0); + if (is_read) + len = -len; + n = 0; + + fields[n].num_bits = 1; + fields[n].out_value = ▮ + fields[n].in_value = NULL; + n++; + + xfer_bits = 8 + len - 1; + /* cmd + read/write - 1 due to the counter implementation */ + if (addr) + xfer_bits += 24; + h_u32_to_be(xfer_bits_buf, xfer_bits); + flip_u8(xfer_bits_buf, xfer_bits_buf, 4); + fields[n].num_bits = 32; + fields[n].out_value = xfer_bits_buf; + fields[n].in_value = NULL; + n++; + + cmd = flip_u32(cmd, 8); fields[n].num_bits = 8; - cmd_buf[0] = cmd; - if (addr) { - h_u24_to_be(cmd_buf + 1, *addr); - fields[n].num_bits += 24; - } - flip_u8(cmd_buf, cmd_buf, 4); - fields[n].out_value = cmd_buf; + fields[n].out_value = &cmd; fields[n].in_value = NULL; n++; - is_read = (len < 0); - if (is_read) - len = -len; + if (addr) { + h_u24_to_be(addr_buf, *addr); + flip_u8(addr_buf, addr_buf, 3); + fields[n].num_bits = 24; + fields[n].out_value = addr_buf; + fields[n].in_value = NULL; + n++; + } + lenb = DIV_ROUND_UP(len, 8); data_buf = malloc(lenb); if (lenb > 0) { @@ -114,10 +134,11 @@ static int jtagspi_cmd(struct flash_bank *bank, uint8_t cmd, return ERROR_FAIL; } if (is_read) { - fields[n].num_bits = info->dr_len; + fields[n].num_bits = jtag_tap_count_enabled(); fields[n].out_value = NULL; fields[n].in_value = NULL; n++; + fields[n].out_value = NULL; fields[n].in_value = data_buf; } else { @@ -130,6 +151,7 @@ static int jtagspi_cmd(struct flash_bank *bank, uint8_t cmd, } jtagspi_set_ir(bank); + /* passing from an IR scan to SHIFT-DR clears BYPASS registers */ jtag_add_dr_scan(info->tap, n, fields, TAP_IDLE); jtag_execute_queue(); |