diff options
| author | Uwe Hermann <uwe@hermann-uwe.de> | 2011-10-14 00:21:06 +0200 |
|---|---|---|
| committer | Spencer Oliver <spen@spen-soft.co.uk> | 2011-10-13 22:29:28 +0000 |
| commit | 498662e2e5e89ab7299b2fa54a307c5bfcdcd00e (patch) | |
| tree | dd99516b5fcbe9cfd309344bc290ad9f5720e6c1 /contrib | |
| parent | d4599b8b3f0c568961d6007e59633456a13a9c18 (diff) | |
| download | riscv-openocd-498662e2e5e89ab7299b2fa54a307c5bfcdcd00e.zip riscv-openocd-498662e2e5e89ab7299b2fa54a307c5bfcdcd00e.tar.gz riscv-openocd-498662e2e5e89ab7299b2fa54a307c5bfcdcd00e.tar.bz2 | |
Add an interface file for DLP Design DLP-USB1232H.
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.
The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter
Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Diffstat (limited to 'contrib')
| -rw-r--r-- | contrib/openocd.udev | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/contrib/openocd.udev b/contrib/openocd.udev index ba951fb..25cc718 100644 --- a/contrib/openocd.udev +++ b/contrib/openocd.udev @@ -27,6 +27,7 @@ ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="664", GROUP="plugdev" # TinCanTools Flyswatter # OOCD-Link # Marvell Sheevaplug (early development versions) +# DLP Design DLP-USB1232H USB-to-UART/FIFO interface module ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", MODE="664", GROUP="plugdev" # Calao Systems USB-A9260-C02 |