diff options
author | Steven Stallion <stallion@squareup.com> | 2016-07-09 22:17:14 -0500 |
---|---|---|
committer | Andreas Fritiofson <andreas.fritiofson@gmail.com> | 2016-08-14 09:06:06 +0100 |
commit | 8285ec4cb06b8809761717a6ac420112ea7b2908 (patch) | |
tree | 3f807956adb623857d4a657e2c51a98f246abb7d | |
parent | a7984eef039730fedb9d99bdc6205f956a2daad7 (diff) | |
download | riscv-openocd-8285ec4cb06b8809761717a6ac420112ea7b2908.zip riscv-openocd-8285ec4cb06b8809761717a6ac420112ea7b2908.tar.gz riscv-openocd-8285ec4cb06b8809761717a6ac420112ea7b2908.tar.bz2 |
kinetis: support mass erase on boards without SRST
NXP (nee Freescale) documents the mass erase procedure using the MDM-AP
block in AN4835. Existing support for this feature did not properly
handle boards without SRST. This patch updates the mass_erase command
such that it works correctly on these boards. Additionally, the core is
left in a halted state once complete to prevent reset loops due to the
watchdog as reported by some users.
Since the MDM-AP provides an additional method of halting and resetting
the core that is disconnected from the DAP, additional commands are
provided to manage this state. These commands are particularly helpful
when connecting to a target with an unknown state.
Change-Id: I40f006d5d964befb12b019c5d509988decdd3f91
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/3540
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
-rw-r--r-- | doc/openocd.texi | 18 | ||||
-rw-r--r-- | src/flash/nor/kinetis.c | 244 |
2 files changed, 210 insertions, 52 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 1632e42..cef1cae 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5290,11 +5290,16 @@ flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME Checks status of device security lock. Used internally in examine-end event. @end deffn +@deffn Command {kinetis mdm halt} +Issues a halt via the MDM-AP. This command can be used to break a watchdog reset +loop when connecting to an unsecured target. +@end deffn + @deffn Command {kinetis mdm mass_erase} -Issues a complete Flash erase via the MDM-AP. -This can be used to erase a chip back to its factory state. -Command removes security lock from a device (use of SRST highly recommended). -It does not require the processor to be halted. +Issues a complete flash erase via the MDM-AP. This can be used to erase a chip +back to its factory state, removing security. It does not require the processor +to be halted, however the target will remain in a halted state after this +command completes. @end deffn @deffn Command {kinetis nvm_partition} @@ -5327,6 +5332,11 @@ kinetis nvm_partition eebkp 16 1024 1024 off @end example @end deffn +@deffn Command {kinetis mdm reset} +Issues a reset via the MDM-AP. This causes the MCU to output a low pulse on the +RESET pin, which can be used to reset other hardware on board. +@end deffn + @deffn Command {kinetis disable_wdog} For Kx devices only (KLx has different COP watchdog, it is not supported). Command disables watchdog timer. diff --git a/src/flash/nor/kinetis.c b/src/flash/nor/kinetis.c index aed37b9..0f63975 100644 --- a/src/flash/nor/kinetis.c +++ b/src/flash/nor/kinetis.c @@ -245,14 +245,14 @@ struct kinetis_flash_bank { #define MDM_STAT_CORE_SLEEPDEEP (1<<17) #define MDM_STAT_CORESLEEPING (1<<18) -#define MEM_CTRL_FMEIP (1<<0) -#define MEM_CTRL_DBG_DIS (1<<1) -#define MEM_CTRL_DBG_REQ (1<<2) -#define MEM_CTRL_SYS_RES_REQ (1<<3) -#define MEM_CTRL_CORE_HOLD_RES (1<<4) -#define MEM_CTRL_VLLSX_DBG_REQ (1<<5) -#define MEM_CTRL_VLLSX_DBG_ACK (1<<6) -#define MEM_CTRL_VLLSX_STAT_ACK (1<<7) +#define MDM_CTRL_FMEIP (1<<0) +#define MDM_CTRL_DBG_DIS (1<<1) +#define MDM_CTRL_DBG_REQ (1<<2) +#define MDM_CTRL_SYS_RES_REQ (1<<3) +#define MDM_CTRL_CORE_HOLD_RES (1<<4) +#define MDM_CTRL_VLLSX_DBG_REQ (1<<5) +#define MDM_CTRL_VLLSX_DBG_ACK (1<<6) +#define MDM_CTRL_VLLSX_STAT_ACK (1<<7) #define MDM_ACCESS_TIMEOUT 3000 /* iterations */ @@ -316,10 +316,113 @@ static int kinetis_mdm_poll_register(struct adiv5_dap *dap, unsigned reg, uint32 } /* + * This command can be used to break a watchdog reset loop when + * connecting to an unsecured target. Unlike other commands, halt will + * automatically retry as it does not know how far into the boot process + * it is when the command is called. + */ +COMMAND_HANDLER(kinetis_mdm_halt) +{ + struct target *target = get_current_target(CMD_CTX); + struct cortex_m_common *cortex_m = target_to_cm(target); + struct adiv5_dap *dap = cortex_m->armv7m.arm.dap; + int retval; + int tries = 0; + uint32_t stat; + + if (!dap) { + LOG_ERROR("Cannot perform halt with a high-level adapter"); + return ERROR_FAIL; + } + + while (true) { + tries++; + + kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_CORE_HOLD_RES); + + alive_sleep(1); + + retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &stat); + if (retval != ERROR_OK) { + LOG_DEBUG("MDM: failed to read MDM_REG_STAT"); + continue; + } + + /* Repeat setting MDM_CTRL_CORE_HOLD_RES until system is out of + * reset with flash ready and without security + */ + if ((stat & (MDM_STAT_FREADY | MDM_STAT_SYSSEC | MDM_STAT_SYSRES)) + == (MDM_STAT_FREADY | MDM_STAT_SYSRES)) + break; + + if (tries > MDM_ACCESS_TIMEOUT) { + LOG_ERROR("MDM: halt timed out"); + return ERROR_FAIL; + } + } + + LOG_DEBUG("MDM: halt succeded after %d attempts.", tries); + + target_poll(target); + /* enable polling in case kinetis_check_flash_security_status disabled it */ + jtag_poll_set_enabled(true); + + alive_sleep(100); + + target->reset_halt = true; + target->type->assert_reset(target); + + retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0); + if (retval != ERROR_OK) { + LOG_ERROR("MDM: failed to clear MDM_REG_CTRL"); + return retval; + } + + target->type->deassert_reset(target); + + return ERROR_OK; +} + +COMMAND_HANDLER(kinetis_mdm_reset) +{ + struct target *target = get_current_target(CMD_CTX); + struct cortex_m_common *cortex_m = target_to_cm(target); + struct adiv5_dap *dap = cortex_m->armv7m.arm.dap; + int retval; + + if (!dap) { + LOG_ERROR("Cannot perform reset with a high-level adapter"); + return ERROR_FAIL; + } + + retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ); + if (retval != ERROR_OK) { + LOG_ERROR("MDM: failed to write MDM_REG_CTRL"); + return retval; + } + + retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT, MDM_STAT_SYSRES, 0); + if (retval != ERROR_OK) { + LOG_ERROR("MDM: failed to assert reset"); + return retval; + } + + retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0); + if (retval != ERROR_OK) { + LOG_ERROR("MDM: failed to clear MDM_REG_CTRL"); + return retval; + } + + return ERROR_OK; +} + +/* * This function implements the procedure to mass erase the flash via * SWD/JTAG on Kinetis K and L series of devices as it is described in * AN4835 "Production Flash Programming Best Practices for Kinetis K- - * and L-series MCUs" Section 4.2.1 + * and L-series MCUs" Section 4.2.1. To prevent a watchdog reset loop, + * the core remains halted after this function completes as suggested + * by the application note. */ COMMAND_HANDLER(kinetis_mdm_mass_erase) { @@ -342,26 +445,53 @@ COMMAND_HANDLER(kinetis_mdm_mass_erase) * establishing communication... */ - /* assert SRST */ - if (jtag_get_reset_config() & RESET_HAS_SRST) + /* assert SRST if configured */ + bool has_srst = jtag_get_reset_config() & RESET_HAS_SRST; + if (has_srst) adapter_assert_reset(); - else - LOG_WARNING("Attempting mass erase without hardware reset. This is not reliable; " - "it's recommended you connect SRST and use ``reset_config srst_only''."); - retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MEM_CTRL_SYS_RES_REQ); - if (retval != ERROR_OK) - return retval; + retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ); + if (retval != ERROR_OK && !has_srst) { + LOG_ERROR("MDM: failed to assert reset"); + goto deassert_reset_and_exit; + } /* - * ... Read the MDM-AP status register until the Flash Ready bit sets... + * ... Read the MDM-AP status register Mass Erase Enable bit to + * determine if the mass erase command is enabled. If Mass Erase + * Enable = 0, then mass erase is disabled and the processor + * cannot be erased or unsecured. If Mass Erase Enable = 1, then + * the mass erase command can be used... + */ + uint32_t stat; + + retval = kinetis_mdm_read_register(dap, MDM_REG_STAT, &stat); + if (retval != ERROR_OK) { + LOG_ERROR("MDM: failed to read MDM_REG_STAT"); + goto deassert_reset_and_exit; + } + + if (!(stat & MDM_STAT_FMEEN)) { + LOG_ERROR("MDM: mass erase is disabled"); + goto deassert_reset_and_exit; + } + + if ((stat & MDM_STAT_SYSSEC) && !(jtag_get_reset_config() & RESET_HAS_SRST)) { + LOG_ERROR("Mass erase of a secured MCU is not possible without hardware reset."); + LOG_INFO("Connect SRST and use 'reset_config srst_only'."); + goto deassert_reset_and_exit; + } + + /* + * ... Read the MDM-AP status register until the Flash Ready bit sets + * and System Reset is asserted... */ retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT, MDM_STAT_FREADY | MDM_STAT_SYSRES, MDM_STAT_FREADY); if (retval != ERROR_OK) { - LOG_ERROR("MDM : flash ready timeout"); - return retval; + LOG_ERROR("MDM: flash ready / system reset timeout"); + goto deassert_reset_and_exit; } /* @@ -369,43 +499,48 @@ COMMAND_HANDLER(kinetis_mdm_mass_erase) * Erase in Progress bit. This will start the mass erase * process... */ - retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, - MEM_CTRL_SYS_RES_REQ | MEM_CTRL_FMEIP); - if (retval != ERROR_OK) - return retval; - - /* As a sanity check make sure that device started mass erase procedure */ - retval = kinetis_mdm_poll_register(dap, MDM_REG_STAT, - MDM_STAT_FMEACK, MDM_STAT_FMEACK); - if (retval != ERROR_OK) - return retval; + retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, MDM_CTRL_SYS_RES_REQ | MDM_CTRL_FMEIP); + if (retval != ERROR_OK) { + LOG_ERROR("MDM: failed to start mass erase"); + goto deassert_reset_and_exit; + } /* * ... Read the MDM-AP control register until the Flash Mass * Erase in Progress bit clears... */ - retval = kinetis_mdm_poll_register(dap, MDM_REG_CTRL, - MEM_CTRL_FMEIP, - 0); - if (retval != ERROR_OK) - return retval; + retval = kinetis_mdm_poll_register(dap, MDM_REG_CTRL, MDM_CTRL_FMEIP, 0); + if (retval != ERROR_OK) { + LOG_ERROR("MDM: mass erase timeout"); + goto deassert_reset_and_exit; + } + + target_poll(target); + /* enable polling in case kinetis_check_flash_security_status disabled it */ + jtag_poll_set_enabled(true); + + alive_sleep(100); + + target->reset_halt = true; + target->type->assert_reset(target); /* * ... Negate the RESET signal or clear the System Reset Request - * bit in the MDM-AP control register... + * bit in the MDM-AP control register. */ retval = kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0); if (retval != ERROR_OK) - return retval; + LOG_ERROR("MDM: failed to clear MDM_REG_CTRL"); - if (jtag_get_reset_config() & RESET_HAS_SRST) { - /* halt MCU otherwise it loops in hard fault - WDOG reset cycle */ - target->reset_halt = true; - target->type->assert_reset(target); - target->type->deassert_reset(target); - } + target->type->deassert_reset(target); - return ERROR_OK; + return retval; + +deassert_reset_and_exit: + kinetis_mdm_write_register(dap, MDM_REG_CTRL, 0); + if (has_srst) + adapter_deassert_reset(); + return retval; } static const uint32_t kinetis_known_mdm_ids[] = { @@ -1922,17 +2057,30 @@ static const struct command_registration kinetis_security_command_handlers[] = { { .name = "check_security", .mode = COMMAND_EXEC, - .help = "", + .help = "Check status of device security lock", .usage = "", .handler = kinetis_check_flash_security_status, }, { + .name = "halt", + .mode = COMMAND_EXEC, + .help = "Issue a halt via the MDM-AP", + .usage = "", + .handler = kinetis_mdm_halt, + }, + { .name = "mass_erase", .mode = COMMAND_EXEC, - .help = "", + .help = "Issue a complete flash erase via the MDM-AP", .usage = "", .handler = kinetis_mdm_mass_erase, }, + { .name = "reset", + .mode = COMMAND_EXEC, + .help = "Issue a reset via the MDM-AP", + .usage = "", + .handler = kinetis_mdm_reset, + }, COMMAND_REGISTRATION_DONE }; @@ -1940,7 +2088,7 @@ static const struct command_registration kinetis_exec_command_handlers[] = { { .name = "mdm", .mode = COMMAND_ANY, - .help = "", + .help = "MDM-AP command group", .usage = "", .chain = kinetis_security_command_handlers, }, @@ -1966,7 +2114,7 @@ static const struct command_registration kinetis_command_handler[] = { { .name = "kinetis", .mode = COMMAND_ANY, - .help = "kinetis flash controller commands", + .help = "Kinetis flash controller commands", .usage = "", .chain = kinetis_exec_command_handlers, }, |