flash/nor: use target_addr_t for flash bank base

This should allow users to configure flash at >32-bit addresses.

Change-Id: I7c9d3c5762579011a2d9708e5317e5765349845c
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4919
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

28 files changed, 121 insertions, 98 deletions

diff --git a/src/flash/nor/at91sam4.c b/src/flash/nor/at91sam4.c
index 2eec15e..d4d48a7 100644
--- a/src/flash/nor/at91sam4.c
+++ b/src/flash/nor/at91sam4.c
@@ -2598,7 +2598,7 @@ static int sam4_info(struct flash_bank *bank, char *buf, int buf_size)
 	}
 
 	snprintf(buf, buf_size,
-		"%s bank %d: %d kB at 0x%08" PRIx32,
+		"%s bank %d: %d kB at " TARGET_ADDR_FMT,
 		pPrivate->pChip->details.name,
 		pPrivate->bank_number,
 		k,
@@ -2642,7 +2642,9 @@ static int sam4_probe(struct flash_bank *bank)
 	for (x = 0; x < SAM4_MAX_FLASH_BANKS; x++) {
 		if (bank->base == pPrivate->pChip->details.bank[x].base_address) {
 			bank->size = pPrivate->pChip->details.bank[x].size_bytes;
-			LOG_DEBUG("SAM4 Set flash bank to %08X - %08X, idx %d", bank->base, bank->base + bank->size, x);
+			LOG_DEBUG("SAM4 Set flash bank to " TARGET_ADDR_FMT " - "
+					TARGET_ADDR_FMT ", idx %d", bank->base,
+					bank->base + bank->size, x);
 			break;
 		}
 	}
diff --git a/src/flash/nor/at91sam4l.c b/src/flash/nor/at91sam4l.c
index 794ccbb..f3b065f 100644
--- a/src/flash/nor/at91sam4l.c
+++ b/src/flash/nor/at91sam4l.c
@@ -203,7 +203,8 @@ static int sam4l_flash_command(struct target *target, uint8_t cmd, int page)
 FLASH_BANK_COMMAND_HANDLER(sam4l_flash_bank_command)
 {
 	if (bank->base != SAM4L_FLASH) {
-		LOG_ERROR("Address 0x%08" PRIx32 " invalid bank address (try 0x%08" PRIx32
+		LOG_ERROR("Address " TARGET_ADDR_FMT
+				" invalid bank address (try 0x%08" PRIx32
 				"[at91sam4l series] )",
 				bank->base, SAM4L_FLASH);
 		return ERROR_FAIL;
diff --git a/src/flash/nor/at91samd.c b/src/flash/nor/at91samd.c
index 90df8be..029579b 100644
--- a/src/flash/nor/at91samd.c
+++ b/src/flash/nor/at91samd.c
@@ -906,7 +906,8 @@ free_pb:
 FLASH_BANK_COMMAND_HANDLER(samd_flash_bank_command)
 {
 	if (bank->base != SAMD_FLASH) {
-		LOG_ERROR("Address 0x%08" PRIx32 " invalid bank address (try 0x%08" PRIx32
+		LOG_ERROR("Address " TARGET_ADDR_FMT
+				" invalid bank address (try 0x%08" PRIx32
 				"[at91samd series] )",
 				bank->base, SAMD_FLASH);
 		return ERROR_FAIL;
diff --git a/src/flash/nor/ath79.c b/src/flash/nor/ath79.c
index 520f6c5..af2112a 100644
--- a/src/flash/nor/ath79.c
+++ b/src/flash/nor/ath79.c
@@ -794,7 +794,7 @@ static int ath79_probe(struct flash_bank *bank)
 
 	ath79_info->io_base = target_device->io_base;
 
-	LOG_DEBUG("Found device %s at address 0x%" PRIx32,
+	LOG_DEBUG("Found device %s at address " TARGET_ADDR_FMT,
 		  target_device->name, bank->base);
 
 	retval = read_flash_id(bank, &id);
diff --git a/src/flash/nor/atsame5.c b/src/flash/nor/atsame5.c
index 7490d0e..ff99e7d 100644
--- a/src/flash/nor/atsame5.c
+++ b/src/flash/nor/atsame5.c
@@ -730,9 +730,8 @@ free_pb:
 FLASH_BANK_COMMAND_HANDLER(same5_flash_bank_command)
 {
 	if (bank->base != SAMD_FLASH) {
-		LOG_ERROR("Address 0x%08" PRIx32 " invalid bank address (try 0x%08" PRIx32
-				"[same5] )",
-				bank->base, SAMD_FLASH);
+		LOG_ERROR("Address " TARGET_ADDR_FMT " invalid bank address (try "
+			"0x%08" PRIx32 "[same5] )", bank->base, SAMD_FLASH);
 		return ERROR_FAIL;
 	}
 
diff --git a/src/flash/nor/bluenrg-x.c b/src/flash/nor/bluenrg-x.c
index 2b56859..f1b2062 100644
--- a/src/flash/nor/bluenrg-x.c
+++ b/src/flash/nor/bluenrg-x.c
@@ -404,9 +404,9 @@ static int bluenrgx_write(struct flash_bank *bank, const uint8_t *buffer,
 		/* Stack pointer for program working area */
 		buf_set_u32(reg_params[4].value, 0, 32, write_algorithm_sp->address);
 
-		LOG_DEBUG("source->address = %08" TARGET_PRIxADDR, source->address);
-		LOG_DEBUG("source->address+ source->size = %08" TARGET_PRIxADDR, source->address+source->size);
-		LOG_DEBUG("write_algorithm_sp->address = %08" TARGET_PRIxADDR, write_algorithm_sp->address);
+		LOG_DEBUG("source->address = " TARGET_ADDR_FMT, source->address);
+		LOG_DEBUG("source->address+ source->size = " TARGET_ADDR_FMT, source->address+source->size);
+		LOG_DEBUG("write_algorithm_sp->address = " TARGET_ADDR_FMT, write_algorithm_sp->address);
 		LOG_DEBUG("address = %08x", address+pre_size);
 		LOG_DEBUG("count = %08x", count);
 
diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c
index a2db50f..1638628 100644
--- a/src/flash/nor/cfi.c
+++ b/src/flash/nor/cfi.c
@@ -889,8 +889,8 @@ static int cfi_intel_erase(struct flash_bank *bank, int first, int last)
 			if (retval != ERROR_OK)
 				return retval;
 
-			LOG_ERROR("couldn't erase block %i of flash bank at base 0x%"
-					PRIx32, i, bank->base);
+			LOG_ERROR("couldn't erase block %i of flash bank at base "
+					TARGET_ADDR_FMT, i, bank->base);
 			return ERROR_FLASH_OPERATION_FAILED;
 		}
 	}
@@ -937,8 +937,8 @@ static int cfi_spansion_erase(struct flash_bank *bank, int first, int last)
 			if (retval != ERROR_OK)
 				return retval;
 
-			LOG_ERROR("couldn't erase block %i of flash bank at base 0x%"
-				PRIx32, i, bank->base);
+			LOG_ERROR("couldn't erase block %i of flash bank at base "
+				TARGET_ADDR_FMT, i, bank->base);
 			return ERROR_FLASH_OPERATION_FAILED;
 		}
 	}
@@ -2001,8 +2001,9 @@ static int cfi_intel_write_word(struct flash_bank *bank, uint8_t *word, uint32_t
 		if (retval != ERROR_OK)
 			return retval;
 
-		LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address 0x%" PRIx32,
-			bank->base, address);
+		LOG_ERROR("couldn't write word at base " TARGET_ADDR_FMT
+				", address 0x%" PRIx32,
+				bank->base, address);
 		return ERROR_FLASH_OPERATION_FAILED;
 	}
 
@@ -2026,9 +2027,9 @@ static int cfi_intel_write_words(struct flash_bank *bank, const uint8_t *word,
 
 	/* Check for valid range */
 	if (address & buffermask) {
-		LOG_ERROR("Write address at base 0x%" PRIx32 ", address 0x%" PRIx32
-			" not aligned to 2^%d boundary",
-			bank->base, address, cfi_info->max_buf_write_size);
+		LOG_ERROR("Write address at base " TARGET_ADDR_FMT ", address 0x%"
+				PRIx32 " not aligned to 2^%d boundary",
+				bank->base, address, cfi_info->max_buf_write_size);
 		return ERROR_FLASH_OPERATION_FAILED;
 	}
 
@@ -2056,7 +2057,8 @@ static int cfi_intel_write_words(struct flash_bank *bank, const uint8_t *word,
 			return retval;
 
 		LOG_ERROR(
-			"couldn't start buffer write operation at base 0x%" PRIx32 ", address 0x%" PRIx32,
+			"couldn't start buffer write operation at base " TARGET_ADDR_FMT
+			", address 0x%" PRIx32,
 			bank->base,
 			address);
 		return ERROR_FLASH_OPERATION_FAILED;
@@ -2085,7 +2087,7 @@ static int cfi_intel_write_words(struct flash_bank *bank, const uint8_t *word,
 		if (retval != ERROR_OK)
 			return retval;
 
-		LOG_ERROR("Buffer write at base 0x%" PRIx32
+		LOG_ERROR("Buffer write at base " TARGET_ADDR_FMT
 			", address 0x%" PRIx32 " failed.", bank->base, address);
 		return ERROR_FLASH_OPERATION_FAILED;
 	}
@@ -2121,7 +2123,7 @@ static int cfi_spansion_write_word(struct flash_bank *bank, uint8_t *word, uint3
 		if (retval != ERROR_OK)
 			return retval;
 
-		LOG_ERROR("couldn't write word at base 0x%" PRIx32
+		LOG_ERROR("couldn't write word at base " TARGET_ADDR_FMT
 			", address 0x%" PRIx32, bank->base, address);
 		return ERROR_FLASH_OPERATION_FAILED;
 	}
@@ -2147,7 +2149,7 @@ static int cfi_spansion_write_words(struct flash_bank *bank, const uint8_t *word
 
 	/* Check for valid range */
 	if (address & buffermask) {
-		LOG_ERROR("Write address at base 0x%" PRIx32
+		LOG_ERROR("Write address at base " TARGET_ADDR_FMT
 			", address 0x%" PRIx32 " not aligned to 2^%d boundary",
 			bank->base, address, cfi_info->max_buf_write_size);
 		return ERROR_FLASH_OPERATION_FAILED;
@@ -2193,7 +2195,7 @@ static int cfi_spansion_write_words(struct flash_bank *bank, const uint8_t *word
 		if (retval != ERROR_OK)
 			return retval;
 
-		LOG_ERROR("couldn't write block at base 0x%" PRIx32
+		LOG_ERROR("couldn't write block at base " TARGET_ADDR_FMT
 			", address 0x%" PRIx32 ", size 0x%" PRIx32, bank->base, address,
 			bufferwsize);
 		return ERROR_FLASH_OPERATION_FAILED;
diff --git a/src/flash/nor/core.c b/src/flash/nor/core.c
index c541afc..11b7ce4 100644
--- a/src/flash/nor/core.c
+++ b/src/flash/nor/core.c
@@ -99,7 +99,8 @@ int flash_driver_write(struct flash_bank *bank,
 	retval = bank->driver->write(bank, buffer, offset, count);
 	if (retval != ERROR_OK) {
 		LOG_ERROR(
-			"error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32,
+			"error writing to flash at address " TARGET_ADDR_FMT
+			" at offset 0x%8.8" PRIx32,
 			bank->base,
 			offset);
 	}
@@ -117,7 +118,8 @@ int flash_driver_read(struct flash_bank *bank,
 	retval = bank->driver->read(bank, buffer, offset, count);
 	if (retval != ERROR_OK) {
 		LOG_ERROR(
-			"error reading to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32,
+			"error reading to flash at address " TARGET_ADDR_FMT
+			" at offset 0x%8.8" PRIx32,
 			bank->base,
 			offset);
 	}
@@ -268,7 +270,7 @@ int get_flash_bank_by_num(int num, struct flash_bank **bank)
 /* lookup flash bank by address, bank not found is success, but
  * result_bank is set to NULL. */
 int get_flash_bank_by_addr(struct target *target,
-	uint32_t addr,
+	target_addr_t addr,
 	bool check,
 	struct flash_bank **result_bank)
 {
@@ -294,7 +296,7 @@ int get_flash_bank_by_addr(struct target *target,
 	}
 	*result_bank = NULL;
 	if (check) {
-		LOG_ERROR("No flash at address 0x%08" PRIx32, addr);
+		LOG_ERROR("No flash at address " TARGET_ADDR_FMT, addr);
 		return ERROR_FAIL;
 	}
 	return ERROR_OK;
@@ -414,13 +416,13 @@ int default_flash_blank_check(struct flash_bank *bank)
  * warning about those additions.
  */
 static int flash_iterate_address_range_inner(struct target *target,
-	char *pad_reason, uint32_t addr, uint32_t length,
+	char *pad_reason, target_addr_t addr, uint32_t length,
 	bool iterate_protect_blocks,
 	int (*callback)(struct flash_bank *bank, int first, int last))
 {
 	struct flash_bank *c;
 	struct flash_sector *block_array;
-	uint32_t last_addr = addr + length;	/* first address AFTER end */
+	target_addr_t last_addr = addr + length;	/* first address AFTER end */
 	int first = -1;
 	int last = -1;
 	int i;
@@ -491,10 +493,10 @@ static int flash_iterate_address_range_inner(struct target *target,
 			else if (addr < end && pad_reason) {
 				/* FIXME say how many bytes (e.g. 80 KB) */
 				LOG_WARNING("Adding extra %s range, "
-					"%#8.8x to %#8.8x",
+					"%#8.8x to " TARGET_ADDR_FMT,
 					pad_reason,
 					(unsigned) f->offset,
-					(unsigned) addr - 1);
+					addr - 1);
 				first = i;
 			} else
 				continue;
@@ -527,10 +529,10 @@ static int flash_iterate_address_range_inner(struct target *target,
 
 	/* invalid start or end address? */
 	if (first == -1 || last == -1) {
-		LOG_ERROR("address range 0x%8.8x .. 0x%8.8x "
-			"is not sector-aligned",
-			(unsigned) (c->base + addr),
-			(unsigned) (c->base + last_addr - 1));
+		LOG_ERROR("address range " TARGET_ADDR_FMT " .. " TARGET_ADDR_FMT
+			" is not sector-aligned",
+			c->base + addr,
+			c->base + last_addr - 1);
 		return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
 	}
 
@@ -545,7 +547,7 @@ static int flash_iterate_address_range_inner(struct target *target,
  * multiple chips.
  */
 static int flash_iterate_address_range(struct target *target,
-	char *pad_reason, uint32_t addr, uint32_t length,
+	char *pad_reason, target_addr_t addr, uint32_t length,
 	bool iterate_protect_blocks,
 	int (*callback)(struct flash_bank *bank, int first, int last))
 {
@@ -579,7 +581,7 @@ static int flash_iterate_address_range(struct target *target,
 }
 
 int flash_erase_address_range(struct target *target,
-	bool pad, uint32_t addr, uint32_t length)
+	bool pad, target_addr_t addr, uint32_t length)
 {
 	return flash_iterate_address_range(target, pad ? "erase" : NULL,
 		addr, length, false, &flash_driver_erase);
@@ -590,7 +592,8 @@ static int flash_driver_unprotect(struct flash_bank *bank, int first, int last)
 	return flash_driver_protect(bank, 0, first, last);
 }
 
-int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t length)
+int flash_unlock_address_range(struct target *target, target_addr_t addr,
+		uint32_t length)
 {
 	/* By default, pad to sector boundaries ... the real issue here
 	 * is that our (only) caller *permanently* removes protection,
diff --git a/src/flash/nor/core.h b/src/flash/nor/core.h
index 67de94e..bd3aa70 100644
--- a/src/flash/nor/core.h
+++ b/src/flash/nor/core.h
@@ -91,7 +91,7 @@ struct flash_bank {
 	void *driver_priv; /**< Private driver storage pointer */
 
 	int bank_number; /**< The 'bank' (or chip number) of this instance. */
-	uint32_t base; /**< The base address of this bank */
+	target_addr_t base; /**< The base address of this bank */
 	uint32_t size; /**< The size of this chip bank, in bytes */
 
 	int chip_width; /**< Width of the chip in bytes (1,2,4 bytes) */
@@ -149,9 +149,9 @@ int flash_register_commands(struct command_context *cmd_ctx);
  * @returns ERROR_OK if successful; otherwise, an error code.
  */
 int flash_erase_address_range(struct target *target,
-		bool pad, uint32_t addr, uint32_t length);
+		bool pad, target_addr_t addr, uint32_t length);
 
-int flash_unlock_address_range(struct target *target, uint32_t addr,
+int flash_unlock_address_range(struct target *target, target_addr_t addr,
 		uint32_t length);
 
 /**
@@ -263,7 +263,7 @@ struct flash_bank *get_flash_bank_by_num_noprobe(int num);
  * @param check return ERROR_OK and result_bank NULL if the bank does not exist
  * @returns The struct flash_bank located at @a addr, or NULL.
  */
-int get_flash_bank_by_addr(struct target *target, uint32_t addr, bool check,
+int get_flash_bank_by_addr(struct target *target, target_addr_t addr, bool check,
 		struct flash_bank **result_bank);
 /**
  * Allocate and fill an array of sectors or protection blocks.
diff --git a/src/flash/nor/fespi.c b/src/flash/nor/fespi.c
index a07972e..ea47afd 100644
--- a/src/flash/nor/fespi.c
+++ b/src/flash/nor/fespi.c
@@ -162,7 +162,7 @@ FLASH_BANK_COMMAND_HANDLER(fespi_flash_bank_command)
 		int temp;
 		COMMAND_PARSE_NUMBER(int, CMD_ARGV[6], temp);
 		fespi_info->ctrl_base = (uint32_t) temp;
-		LOG_DEBUG("ASSUMING FESPI device at ctrl_base = 0x%" TARGET_PRIxADDR,
+		LOG_DEBUG("ASSUMING FESPI device at ctrl_base = " TARGET_ADDR_FMT,
 				fespi_info->ctrl_base);
 	}
 
@@ -176,7 +176,7 @@ static int fespi_read_reg(struct flash_bank *bank, uint32_t *value, target_addr_
 
 	int result = target_read_u32(target, fespi_info->ctrl_base + address, value);
 	if (result != ERROR_OK) {
-		LOG_ERROR("fespi_read_reg() error at 0x%" TARGET_PRIxADDR,
+		LOG_ERROR("fespi_read_reg() error at " TARGET_ADDR_FMT,
 				fespi_info->ctrl_base + address);
 		return result;
 	}
@@ -190,7 +190,7 @@ static int fespi_write_reg(struct flash_bank *bank, target_addr_t address, uint3
 
 	int result = target_write_u32(target, fespi_info->ctrl_base + address, value);
 	if (result != ERROR_OK) {
-		LOG_ERROR("fespi_write_reg() error writing 0x%x to 0x%" TARGET_PRIxADDR,
+		LOG_ERROR("fespi_write_reg() error writing 0x%x to " TARGET_ADDR_FMT,
 				value, fespi_info->ctrl_base + address);
 		return result;
 	}
@@ -709,7 +709,7 @@ static int steps_execute(struct algorithm_steps *as,
 				data_buf);
 		free(data_buf);
 		if (retval != ERROR_OK) {
-			LOG_ERROR("Failed to write data to 0x%" TARGET_PRIxADDR ": %d",
+			LOG_ERROR("Failed to write data to " TARGET_ADDR_FMT ": %d",
 					data_wa->address, retval);
 			goto exit;
 		}
@@ -718,7 +718,7 @@ static int steps_execute(struct algorithm_steps *as,
 				algorithm_wa->address, algorithm_wa->address + 4,
 				10000, NULL);
 		if (retval != ERROR_OK) {
-			LOG_ERROR("Failed to execute algorithm at 0x%" TARGET_PRIxADDR ": %d",
+			LOG_ERROR("Failed to execute algorithm at " TARGET_ADDR_FMT ": %d",
 					algorithm_wa->address, retval);
 			goto exit;
 		}
@@ -775,7 +775,7 @@ static int fespi_write(struct flash_bank *bank, const uint8_t *buffer,
 		retval = target_write_buffer(target, algorithm_wa->address,
 				sizeof(algorithm_bin), algorithm_bin);
 		if (retval != ERROR_OK) {
-			LOG_ERROR("Failed to write code to 0x%" TARGET_PRIxADDR ": %d",
+			LOG_ERROR("Failed to write code to " TARGET_ADDR_FMT ": %d",
 					algorithm_wa->address, retval);
 			target_free_working_area(target, algorithm_wa);
 			algorithm_wa = NULL;
@@ -935,12 +935,13 @@ static int fespi_probe(struct flash_bank *bank)
 
 		fespi_info->ctrl_base = target_device->ctrl_base;
 
-		LOG_DEBUG("Valid FESPI on device %s at address 0x%" PRIx32,
+		LOG_DEBUG("Valid FESPI on device %s at address " TARGET_ADDR_FMT,
 				target_device->name, bank->base);
 
 	} else {
-	  LOG_DEBUG("Assuming FESPI as specified at address 0x%" TARGET_PRIxADDR
-			  " with ctrl at 0x%x", fespi_info->ctrl_base, bank->base);
+	  LOG_DEBUG("Assuming FESPI as specified at address " TARGET_ADDR_FMT
+			  " with ctrl at " TARGET_ADDR_FMT, fespi_info->ctrl_base,
+			  bank->base);
 	}
 
 	/* read and decode flash ID; returns in SW mode */
diff --git a/src/flash/nor/fm4.c b/src/flash/nor/fm4.c
index d4d0f76..171cbd7 100644
--- a/src/flash/nor/fm4.c
+++ b/src/flash/nor/fm4.c
@@ -272,7 +272,7 @@ static int fm4_flash_write(struct flash_bank *bank, const uint8_t *buffer,
 		uint32_t halfwords = MIN(halfword_count, data_workarea->size / 2);
 		uint32_t addr = bank->base + offset;
 
-		LOG_DEBUG("copying %" PRId32 " bytes to SRAM 0x%08" TARGET_PRIxADDR,
+		LOG_DEBUG("copying %" PRId32 " bytes to SRAM " TARGET_ADDR_FMT,
 			MIN(halfwords * 2, byte_count), data_workarea->address);
 
 		retval = target_write_buffer(target, data_workarea->address,
diff --git a/src/flash/nor/kinetis.c b/src/flash/nor/kinetis.c
index eca74a8..d827355 100644
--- a/src/flash/nor/kinetis.c
+++ b/src/flash/nor/kinetis.c
@@ -1755,13 +1755,15 @@ static int kinetis_write_sections(struct flash_bank *bank, const uint8_t *buffer
 			result = target_write_memory(bank->target, k_chip->progr_accel_ram,
 						4, size_aligned / 4, buffer_aligned);
 
-			LOG_DEBUG("section @ %08" PRIx32 " aligned begin %" PRIu32 ", end %" PRIu32,
+			LOG_DEBUG("section @ " TARGET_ADDR_FMT " aligned begin %" PRIu32
+					", end %" PRIu32,
 					bank->base + offset, align_begin, align_end);
 		} else
 			result = target_write_memory(bank->target, k_chip->progr_accel_ram,
 						4, size_aligned / 4, buffer);
 
-		LOG_DEBUG("write section @ %08" PRIx32 " with length %" PRIu32 " bytes",
+		LOG_DEBUG("write section @ " TARGET_ADDR_FMT " with length %" PRIu32
+				" bytes",
 			  bank->base + offset, size);
 
 		if (result != ERROR_OK) {
@@ -1776,12 +1778,14 @@ static int kinetis_write_sections(struct flash_bank *bank, const uint8_t *buffer
 				0, 0, 0, 0,  &ftfx_fstat);
 
 		if (result != ERROR_OK) {
-			LOG_ERROR("Error writing section at %08" PRIx32, bank->base + offset);
+			LOG_ERROR("Error writing section at " TARGET_ADDR_FMT,
+					bank->base + offset);
 			break;
 		}
 
 		if (ftfx_fstat & 0x01) {
-			LOG_ERROR("Flash write error at %08" PRIx32, bank->base + offset);
+			LOG_ERROR("Flash write error at " TARGET_ADDR_FMT,
+					bank->base + offset);
 			if (k_bank->prog_base == 0 && offset == FCF_ADDRESS + FCF_SIZE
 					&& (k_chip->flash_support & FS_WIDTH_256BIT)) {
 				LOG_ERROR("Flash write immediately after the end of Flash Config Field shows error");
@@ -1820,7 +1824,7 @@ static int kinetis_write_inner(struct flash_bank *bank, const uint8_t *buffer,
 		}
 	}
 
-	LOG_DEBUG("flash write @ %08" PRIx32, bank->base + offset);
+	LOG_DEBUG("flash write @ " TARGET_ADDR_FMT, bank->base + offset);
 
 	if (fallback == 0) {
 		/* program section command */
@@ -1873,12 +1877,14 @@ static int kinetis_write_inner(struct flash_bank *bank, const uint8_t *buffer,
 						0, 0, 0, 0,  &ftfx_fstat);
 
 				if (result != ERROR_OK) {
-					LOG_ERROR("Error writing longword at %08" PRIx32, bank->base + offset);
+					LOG_ERROR("Error writing longword at " TARGET_ADDR_FMT,
+							bank->base + offset);
 					break;
 				}
 
 				if (ftfx_fstat & 0x01)
-					LOG_ERROR("Flash write error at %08" PRIx32, bank->base + offset);
+					LOG_ERROR("Flash write error at " TARGET_ADDR_FMT,
+							bank->base + offset);
 
 				buffer += 4;
 				offset += 4;
@@ -2769,7 +2775,7 @@ static int kinetis_info(struct flash_bank *bank, char *buf, int buf_size)
 	uint32_t size_k = bank->size / 1024;
 
 	snprintf(buf, buf_size,
-		"%s %s: %" PRIu32 "k %s bank %s at 0x%08" PRIx32,
+		"%s %s: %" PRIu32 "k %s bank %s at " TARGET_ADDR_FMT,
 		bank->driver->name, k_chip->name,
 		size_k, bank_class_names[k_bank->flash_class],
 		bank->name, bank->base);
diff --git a/src/flash/nor/kinetis_ke.c b/src/flash/nor/kinetis_ke.c
index 8103b63..9441a9d 100644
--- a/src/flash/nor/kinetis_ke.c
+++ b/src/flash/nor/kinetis_ke.c
@@ -1175,7 +1175,7 @@ static int kinetis_ke_auto_probe(struct flash_bank *bank)
 static int kinetis_ke_info(struct flash_bank *bank, char *buf, int buf_size)
 {
 	(void) snprintf(buf, buf_size,
-			"%s driver for flash bank %s at 0x%8.8" PRIx32 "",
+			"%s driver for flash bank %s at " TARGET_ADDR_FMT,
 			bank->driver->name,	bank->name, bank->base);
 
 	return ERROR_OK;
diff --git a/src/flash/nor/lpc2000.c b/src/flash/nor/lpc2000.c
index e62fc79..58afd79 100644
--- a/src/flash/nor/lpc2000.c
+++ b/src/flash/nor/lpc2000.c
@@ -719,7 +719,7 @@ static int lpc2000_iap_working_area_init(struct flash_bank *bank, struct working
 
 	int retval = target_write_memory(target, (*iap_working_area)->address, 4, 2, jump_gate);
 	if (retval != ERROR_OK) {
-		LOG_ERROR("Write memory at address 0x%8.8" TARGET_PRIxADDR " failed (check work_area definition)",
+		LOG_ERROR("Write memory at address " TARGET_ADDR_FMT " failed (check work_area definition)",
 				(*iap_working_area)->address);
 		target_free_working_area(target, *iap_working_area);
 	}
@@ -1186,8 +1186,8 @@ static int lpc2000_write(struct flash_bank *bank, const uint8_t *buffer, uint32_
 			free(last_buffer);
 		}
 
-		LOG_DEBUG("writing 0x%" PRIx32 " bytes to address 0x%" PRIx32, thisrun_bytes,
-				bank->base + offset + bytes_written);
+		LOG_DEBUG("writing 0x%" PRIx32 " bytes to address " TARGET_ADDR_FMT,
+				thisrun_bytes, bank->base + offset + bytes_written);
 
 		/* Write data */
 		param_table[0] = bank->base + offset + bytes_written;
diff --git a/src/flash/nor/lpcspifi.c b/src/flash/nor/lpcspifi.c
index a50584f..a7e65ec 100644
--- a/src/flash/nor/lpcspifi.c
+++ b/src/flash/nor/lpcspifi.c
@@ -186,7 +186,7 @@ static int lpcspifi_set_hw_mode(struct flash_bank *bank)
 		return retval;
 	}
 
-	LOG_DEBUG("Writing algorithm to working area at 0x%08" TARGET_PRIxADDR,
+	LOG_DEBUG("Writing algorithm to working area at " TARGET_ADDR_FMT,
 		spifi_init_algorithm->address);
 	/* Write algorithm to working area */
 	retval = target_write_buffer(target,
diff --git a/src/flash/nor/niietcm4.c b/src/flash/nor/niietcm4.c
index fd7d519..f2f4470 100644
--- a/src/flash/nor/niietcm4.c
+++ b/src/flash/nor/niietcm4.c
@@ -1584,9 +1584,11 @@ static int niietcm4_probe_k1921vk01t(struct flash_bank *bank)
 
 		char info_bootflash_addr_str[64];
 		if (niietcm4_info->bflash_info_remap)
-			snprintf(info_bootflash_addr_str, sizeof(info_bootflash_addr_str), "0x%08x base adress", bank->base);
+			snprintf(info_bootflash_addr_str, sizeof(info_bootflash_addr_str),
+					TARGET_ADDR_FMT " base adress", bank->base);
 		else
-			snprintf(info_bootflash_addr_str, sizeof(info_bootflash_addr_str), "not maped to global adress space");
+			snprintf(info_bootflash_addr_str, sizeof(info_bootflash_addr_str),
+					"not mapped to global adress space");
 
 		snprintf(niietcm4_info->chip_brief,
 				sizeof(niietcm4_info->chip_brief),
diff --git a/src/flash/nor/nrf5.c b/src/flash/nor/nrf5.c
index ea99b39..1e8dda3 100644
--- a/src/flash/nor/nrf5.c
+++ b/src/flash/nor/nrf5.c
@@ -906,7 +906,7 @@ FLASH_BANK_COMMAND_HANDLER(nrf5_flash_bank_command)
 		bank->bank_number = 1;
 		break;
 	default:
-		LOG_ERROR("Invalid bank address 0x%08" PRIx32, bank->base);
+		LOG_ERROR("Invalid bank address " TARGET_ADDR_FMT, bank->base);
 		return ERROR_FAIL;
 	}
 
diff --git a/src/flash/nor/numicro.c b/src/flash/nor/numicro.c
index 4d951f0..ebf9d53 100644
--- a/src/flash/nor/numicro.c
+++ b/src/flash/nor/numicro.c
@@ -1496,7 +1496,8 @@ static int numicro_erase(struct flash_bank *bank, int first, int last)
 		return retval;
 
 	for (i = first; i <= last; i++) {
-		LOG_DEBUG("erasing sector %d at address 0x%" PRIx32 "", i, bank->base + bank->sectors[i].offset);
+		LOG_DEBUG("erasing sector %d at address " TARGET_ADDR_FMT, i,
+				bank->base + bank->sectors[i].offset);
 		retval = target_write_u32(target, NUMICRO_FLASH_ISPADR, bank->base + bank->sectors[i].offset);
 		if (retval != ERROR_OK)
 			return retval;
@@ -1678,7 +1679,8 @@ static int numicro_get_flash_size(struct flash_bank *bank, const struct numicro_
 	for (size_t i = 0; i < cpu->n_banks; i++) {
 		if (bank->base == cpu->bank[i].base) {
 			*flash_size = cpu->bank[i].size;
-			LOG_INFO("bank base = 0x%08" PRIx32 ", size = 0x%08" PRIx32 "", bank->base, *flash_size);
+			LOG_INFO("bank base = " TARGET_ADDR_FMT ", size = 0x%08"
+					PRIx32, bank->base, *flash_size);
 			return ERROR_OK;
 		}
 	}
diff --git a/src/flash/nor/pic32mx.c b/src/flash/nor/pic32mx.c
index e3b8028..852a8bd 100644
--- a/src/flash/nor/pic32mx.c
+++ b/src/flash/nor/pic32mx.c
@@ -620,7 +620,7 @@ static int pic32mx_write(struct flash_bank *bank, const uint8_t *buffer, uint32_
 		return ERROR_TARGET_NOT_HALTED;
 	}
 
-	LOG_DEBUG("writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32
+	LOG_DEBUG("writing to flash at address " TARGET_ADDR_FMT " at offset 0x%8.8" PRIx32
 			" count: 0x%8.8" PRIx32 "", bank->base, offset, count);
 
 	if (offset & 0x3) {
diff --git a/src/flash/nor/psoc5lp.c b/src/flash/nor/psoc5lp.c
index d8e1c15..47567e7 100644
--- a/src/flash/nor/psoc5lp.c
+++ b/src/flash/nor/psoc5lp.c
@@ -1227,7 +1227,7 @@ static int psoc5lp_write(struct flash_bank *bank, const uint8_t *buffer,
 			struct working_area *data_area = even_row ? even_row_area : odd_row_area;
 			unsigned len = MIN(ROW_SIZE, byte_count);
 
-			LOG_DEBUG("Writing load command for array %u row %u at 0x%08" TARGET_PRIxADDR,
+			LOG_DEBUG("Writing load command for array %u row %u at " TARGET_ADDR_FMT,
 				array_id, row, data_area->address);
 
 			psoc5lp_spc_write_opcode_buffer(target, buf, SPC_LOAD_ROW);
diff --git a/src/flash/nor/stm32h7x.c b/src/flash/nor/stm32h7x.c
index fcfcf91..ad76af4 100644
--- a/src/flash/nor/stm32h7x.c
+++ b/src/flash/nor/stm32h7x.c
@@ -833,8 +833,8 @@ static int stm32x_probe(struct flash_bank *bank)
 			/* This is the first bank */
 			flash_size_in_kb = stm32x_info->part_info->first_bank_size_kb;
 		} else {
-			LOG_WARNING("STM32H flash bank base address config is incorrect."
-				    " 0x%" PRIx32 " but should rather be 0x%" PRIx32 " or 0x%" PRIx32,
+			LOG_WARNING("STM32H flash bank base address config is incorrect. "
+				    TARGET_ADDR_FMT " but should rather be 0x%" PRIx32 " or 0x%" PRIx32,
 					bank->base, base_address, second_bank_base);
 			return ERROR_FAIL;
 		}
diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c
index 1be950f..814df8f 100644
--- a/src/flash/nor/stm32lx.c
+++ b/src/flash/nor/stm32lx.c
@@ -816,8 +816,9 @@ static int stm32lx_probe(struct flash_bank *bank)
 			/* This is the first bank */
 			flash_size_in_kb = stm32lx_info->part_info.first_bank_size_kb;
 		} else {
-			LOG_WARNING("STM32L flash bank base address config is incorrect."
-				    " 0x%" PRIx32 " but should rather be 0x%" PRIx32 " or 0x%" PRIx32,
+			LOG_WARNING("STM32L flash bank base address config is incorrect. "
+					TARGET_ADDR_FMT " but should rather be 0x%" PRIx32
+					" or 0x%" PRIx32,
 						bank->base, base_address, second_bank_base);
 			return ERROR_FAIL;
 		}
diff --git a/src/flash/nor/stmsmi.c b/src/flash/nor/stmsmi.c
index 4d38e94..b55c8b9 100644
--- a/src/flash/nor/stmsmi.c
+++ b/src/flash/nor/stmsmi.c
@@ -559,13 +559,13 @@ static int stmsmi_probe(struct flash_bank *bank)
 			stmsmi_info->bank_num = SMI_SEL_BANK3;
 			break;
 		default:
-			LOG_ERROR("Invalid SMI base address 0x%" PRIx32, bank->base);
+			LOG_ERROR("Invalid SMI base address " TARGET_ADDR_FMT, bank->base);
 			return ERROR_FAIL;
 	}
 	io_base = target_device->io_base;
 	stmsmi_info->io_base = io_base;
 
-	LOG_DEBUG("Valid SMI on device %s at address 0x%" PRIx32,
+	LOG_DEBUG("Valid SMI on device %s at address " TARGET_ADDR_FMT,
 		target_device->name, bank->base);
 
 	/* read and decode flash ID; returns in SW mode */
diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c
index f056e07..7a402b0 100644
--- a/src/flash/nor/tcl.c
+++ b/src/flash/nor/tcl.c
@@ -112,7 +112,7 @@ COMMAND_HANDLER(handle_flash_info_command)
 			LOG_WARNING("Flash protection check is not implemented.");
 
 		command_print(CMD_CTX,
-			"#%d : %s at 0x%8.8" PRIx32 ", size 0x%8.8" PRIx32
+			"#%d : %s at " TARGET_ADDR_FMT ", size 0x%8.8" PRIx32
 			", buswidth %i, chipwidth %i",
 			p->bank_number,
 			p->driver->name,
@@ -177,7 +177,7 @@ COMMAND_HANDLER(handle_flash_probe_command)
 		retval = p->driver->probe(p);
 		if (retval == ERROR_OK)
 			command_print(CMD_CTX,
-				"flash '%s' found at 0x%8.8" PRIx32,
+				"flash '%s' found at " TARGET_ADDR_FMT,
 				p->driver->name,
 				p->base);
 	} else {
@@ -205,7 +205,8 @@ COMMAND_HANDLER(handle_flash_erase_check_command)
 		command_print(CMD_CTX, "successfully checked erase state");
 	else {
 		command_print(CMD_CTX,
-			"unknown error when checking erase state of flash bank #%s at 0x%8.8" PRIx32,
+			"unknown error when checking erase state of flash bank #%s at "
+			TARGET_ADDR_FMT,
 			CMD_ARGV[0],
 			p->base);
 	}
@@ -239,7 +240,7 @@ COMMAND_HANDLER(handle_flash_erase_address_command)
 {
 	struct flash_bank *p;
 	int retval = ERROR_OK;
-	uint32_t address;
+	target_addr_t address;
 	uint32_t length;
 	bool do_pad = false;
 	bool do_unlock = false;
@@ -262,7 +263,7 @@ COMMAND_HANDLER(handle_flash_erase_address_command)
 	if (CMD_ARGC != 2)
 		return ERROR_COMMAND_SYNTAX_ERROR;
 
-	COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address);
+	COMMAND_PARSE_ADDRESS(CMD_ARGV[0], address);
 	COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], length);
 
 	if (length <= 0) {
@@ -288,7 +289,8 @@ COMMAND_HANDLER(handle_flash_erase_address_command)
 		retval = flash_erase_address_range(target, do_pad, address, length);
 
 	if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) {
-		command_print(CMD_CTX, "erased address 0x%8.8" PRIx32 " (length %" PRIi32 ")"
+		command_print(CMD_CTX, "erased address " TARGET_ADDR_FMT " (length %"
+				PRIi32 ")"
 			" in %fs (%0.3f KiB/s)", address, length,
 			duration_elapsed(&bench), duration_kbps(&bench, length));
 	}
@@ -1138,7 +1140,7 @@ COMMAND_HANDLER(handle_flash_bank_command)
 	c->name = strdup(bank_name);
 	c->target = target;
 	c->driver = driver;
-	COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], c->base);
+	COMMAND_PARSE_NUMBER(target_addr, CMD_ARGV[1], c->base);
 	COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], c->size);
 	COMMAND_PARSE_NUMBER(int, CMD_ARGV[3], c->chip_width);
 	COMMAND_PARSE_NUMBER(int, CMD_ARGV[4], c->bus_width);
@@ -1148,8 +1150,8 @@ COMMAND_HANDLER(handle_flash_bank_command)
 	int retval;
 	retval = CALL_COMMAND_HANDLER(driver->flash_bank_command, c);
 	if (ERROR_OK != retval) {
-		LOG_ERROR("'%s' driver rejected flash bank at 0x%8.8" PRIx32 "; usage: %s",
-			driver_name, c->base, driver->usage);
+		LOG_ERROR("'%s' driver rejected flash bank at " TARGET_ADDR_FMT
+				"; usage: %s", driver_name, c->base, driver->usage);
 		free(c);
 		return retval;
 	}
@@ -1169,7 +1171,7 @@ COMMAND_HANDLER(handle_flash_banks_command)
 
 	unsigned n = 0;
 	for (struct flash_bank *p = flash_bank_list(); p; p = p->next, n++) {
-		LOG_USER("#%d : %s (%s) at 0x%8.8" PRIx32 ", size 0x%8.8" PRIx32 ", "
+		LOG_USER("#%d : %s (%s) at " TARGET_ADDR_FMT ", size 0x%8.8" PRIx32 ", "
 			"buswidth %u, chipwidth %u", p->bank_number,
 			p->name, p->driver->name, p->base, p->size,
 			p->bus_width, p->chip_width);
diff --git a/src/flash/nor/tms470.c b/src/flash/nor/tms470.c
index 2435e79..62fe2f5 100644
--- a/src/flash/nor/tms470.c
+++ b/src/flash/nor/tms470.c
@@ -165,7 +165,8 @@ static int tms470_read_part_info(struct flash_bank *bank)
 			part_name = "TMS470R1A256";
 
 			if (bank->base >= 0x00040000) {
-				LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".",
+				LOG_ERROR("No %s flash bank contains base address "
+						TARGET_ADDR_FMT ".",
 						part_name,
 						bank->base);
 				return ERROR_FLASH_OPERATION_FAILED;
@@ -204,7 +205,7 @@ static int tms470_read_part_info(struct flash_bank *bank)
 				(void)memcpy(bank->sectors, TMS470R1A288_BANK1_SECTORS,
 						sizeof(TMS470R1A288_BANK1_SECTORS));
 			} else {
-				LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".",
+				LOG_ERROR("No %s flash bank contains base address " TARGET_ADDR_FMT ".",
 						part_name, bank->base);
 				return ERROR_FLASH_OPERATION_FAILED;
 			}
@@ -244,7 +245,7 @@ static int tms470_read_part_info(struct flash_bank *bank)
 				(void)memcpy(bank->sectors, TMS470R1A384_BANK2_SECTORS,
 						sizeof(TMS470R1A384_BANK2_SECTORS));
 			} else {
-				LOG_ERROR("No %s flash bank contains base address 0x%08" PRIx32 ".",
+				LOG_ERROR("No %s flash bank contains base address " TARGET_ADDR_FMT ".",
 						part_name, bank->base);
 				return ERROR_FLASH_OPERATION_FAILED;
 			}
@@ -900,8 +901,8 @@ static int tms470_write(struct flash_bank *bank, const uint8_t *buffer, uint32_t
 
 	tms470_read_part_info(bank);
 
-	LOG_INFO("Writing %" PRId32 " bytes starting at 0x%08" PRIx32 "", count, bank->base +
-		offset);
+	LOG_INFO("Writing %" PRId32 " bytes starting at " TARGET_ADDR_FMT,
+			count, bank->base + offset);
 
 	/* set GLBCTRL.4  */
 	target_read_u32(target, 0xFFFFFFDC, &glbctrl);
diff --git a/src/flash/nor/virtual.c b/src/flash/nor/virtual.c
index 15c4bff..217f7a4 100644
--- a/src/flash/nor/virtual.c
+++ b/src/flash/nor/virtual.c
@@ -185,7 +185,7 @@ static int virtual_info(struct flash_bank *bank, char *buf, int buf_size)
 	if (master_bank == NULL)
 		return ERROR_FLASH_OPERATION_FAILED;
 
-	snprintf(buf, buf_size, "%s driver for flash bank %s at 0x%8.8" PRIx32 "",
+	snprintf(buf, buf_size, "%s driver for flash bank %s at " TARGET_ADDR_FMT,
 			bank->driver->name, master_bank->name, master_bank->base);
 
 	return ERROR_OK;
diff --git a/src/flash/nor/xmc1xxx.c b/src/flash/nor/xmc1xxx.c
index 4b25398..262300c 100644
--- a/src/flash/nor/xmc1xxx.c
+++ b/src/flash/nor/xmc1xxx.c
@@ -305,7 +305,7 @@ static int xmc1xxx_write(struct flash_bank *bank, const uint8_t *buffer,
 		uint32_t blocks = MIN(block_count, data_workarea->size / NVM_BLOCK_SIZE);
 		uint32_t addr = bank->base + offset;
 
-		LOG_DEBUG("copying %" PRId32 " bytes to SRAM 0x%08" TARGET_PRIxADDR,
+		LOG_DEBUG("copying %" PRId32 " bytes to SRAM " TARGET_ADDR_FMT,
 			MIN(blocks * NVM_BLOCK_SIZE, byte_count),
 			data_workarea->address);
 
diff --git a/src/flash/nor/xmc4xxx.c b/src/flash/nor/xmc4xxx.c
index 0b6d48c..d862e85 100644
--- a/src/flash/nor/xmc4xxx.c
+++ b/src/flash/nor/xmc4xxx.c
@@ -778,7 +778,7 @@ static int xmc4xxx_write(struct flash_bank *bank, const uint8_t *buffer,
 		memcpy(&tmp_buf[start_pad], buffer, remaining);
 
 		if (end_pad) {
-			LOG_INFO("Padding end of page @%08"PRIx32" by %d bytes",
+			LOG_INFO("Padding end of page @" TARGET_ADDR_FMT " by %d bytes",
 				 bank->base + offset, end_pad);
 			memset(&tmp_buf[256 - end_pad], 0xff, end_pad);
 		}