diff options
author | Øyvind Harboe <oyvind.harboe@zylin.com> | 2009-10-26 14:39:32 +0100 |
---|---|---|
committer | Øyvind Harboe <oyvind.harboe@zylin.com> | 2009-11-10 13:13:13 +0100 |
commit | c202ba7d34bd7feba88d7c0ee1aa9ef7be18bca9 (patch) | |
tree | 0c514293a4c7243495818d0d8b97a36ec2514e34 | |
parent | 1f357869c19cccdb3259eae10c1124af5c9510ff (diff) | |
download | riscv-openocd-c202ba7d34bd7feba88d7c0ee1aa9ef7be18bca9.zip riscv-openocd-c202ba7d34bd7feba88d7c0ee1aa9ef7be18bca9.tar.gz riscv-openocd-c202ba7d34bd7feba88d7c0ee1aa9ef7be18bca9.tar.bz2 |
ARM11: remove old mrc/mcr commands
Switch to new commands in config scripts
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
-rw-r--r-- | doc/openocd.texi | 20 | ||||
-rw-r--r-- | src/target/arm11.c | 102 | ||||
-rw-r--r-- | tcl/board/csb732.cfg | 6 | ||||
-rw-r--r-- | tcl/target/c100helper.tcl | 8 | ||||
-rw-r--r-- | tcl/target/imx.cfg | 2 |
5 files changed, 9 insertions, 129 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 86f5748..8223ee9 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -1502,7 +1502,7 @@ proc setc15 @{regs value@} @{ echo [format "set p15 0x%04x, 0x%08x" $regs $value] - arm11 mcr $TARGETNAME 15 [expr ($regs>>12)&0x7] \ + mcr 15 [expr ($regs>>12)&0x7] \ [expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] \ [expr ($regs>>8)&0x7] $value @} @@ -5796,15 +5796,6 @@ Without arguments, the current settings are displayed. @subsection ARM11 specific commands @cindex ARM11 -@deffn Command {arm11 mcr} pX opc1 CRn CRm opc2 value -Write @var{value} to a coprocessor @var{pX} register -passing parameters @var{CRn}, -@var{CRm}, opcodes @var{opc1} and @var{opc2}, -and the MCR instruction. -(The difference beween this and the MCR2 instruction is -one bit in the encoding, effecively a fifth parameter.) -@end deffn - @deffn Command {arm11 memwrite burst} [value] Displays the value of the memwrite burst-enable flag, which is enabled by default. Burst writes are only used @@ -5821,15 +5812,6 @@ which is enabled by default. If @var{value} is defined, first assigns that. @end deffn -@deffn Command {arm11 mrc} pX opc1 CRn CRm opc2 -Read a coprocessor @var{pX} register passing parameters @var{CRn}, -@var{CRm}, opcodes @var{opc1} and @var{opc2}, -and the MRC instruction. -(The difference beween this and the MRC2 instruction is -one bit in the encoding, effecively a fifth parameter.) -Displays the result. -@end deffn - @deffn Command {arm11 step_irq_enable} [value] Displays the value of the flag controlling whether IRQs are enabled during single stepping; diff --git a/src/target/arm11.c b/src/target/arm11.c index 6cdfa64..9d885de 100644 --- a/src/target/arm11.c +++ b/src/target/arm11.c @@ -2087,101 +2087,6 @@ static arm11_common_t * arm11_find_target(const char * arg) return 0; } -static int arm11_handle_mrc_mcr(struct command_context_s *cmd_ctx, - char *cmd, char **args, int argc, bool read) -{ - int retval; - - if (argc != (read ? 6 : 7)) - { - LOG_ERROR("Invalid number of arguments."); - return ERROR_COMMAND_SYNTAX_ERROR; - } - - arm11_common_t * arm11 = arm11_find_target(args[0]); - - if (!arm11) - { - LOG_ERROR("Parameter 1 is not a the JTAG chain position of an ARM11 device."); - return ERROR_COMMAND_SYNTAX_ERROR; - } - - if (arm11->target->state != TARGET_HALTED) - { - LOG_WARNING("target was not halted"); - return ERROR_TARGET_NOT_HALTED; - } - - uint32_t values[6]; - - for (size_t i = 0; i < (read ? 5 : 6); i++) - { - COMMAND_PARSE_NUMBER(u32, args[i + 1], values[i]); - - if (values[i] > arm11_coproc_instruction_limits[i]) - { - LOG_ERROR("Parameter %ld out of bounds (%" PRId32 " max).", - (long)(i + 2), - arm11_coproc_instruction_limits[i]); - return ERROR_COMMAND_SYNTAX_ERROR; - } - } - - uint32_t instr = 0xEE000010 | - (values[0] << 8) | - (values[1] << 21) | - (values[2] << 16) | - (values[3] << 0) | - (values[4] << 5); - - if (read) - instr |= 0x00100000; - - retval = arm11_run_instr_data_prepare(arm11); - if (retval != ERROR_OK) - return retval; - - if (read) - { - uint32_t result; - retval = arm11_run_instr_data_from_core_via_r0(arm11, instr, &result); - if (retval != ERROR_OK) - return retval; - - LOG_INFO("MRC p%d, %d, R0, c%d, c%d, %d = 0x%08" PRIx32 " (%" PRId32 ")", - (int)(values[0]), - (int)(values[1]), - (int)(values[2]), - (int)(values[3]), - (int)(values[4]), result, result); - } - else - { - retval = arm11_run_instr_data_to_core_via_r0(arm11, instr, values[5]); - if (retval != ERROR_OK) - return retval; - - LOG_INFO("MRC p%d, %d, R0 (#0x%08" PRIx32 "), c%d, c%d, %d", - (int)(values[0]), (int)(values[1]), - values[5], - (int)(values[2]), (int)(values[3]), (int)(values[4])); - } - - return arm11_run_instr_data_finish(arm11); -} - -static int arm11_handle_mrc(struct command_context_s *cmd_ctx, - char *cmd, char **args, int argc) -{ - return arm11_handle_mrc_mcr(cmd_ctx, cmd, args, argc, true); -} - -static int arm11_handle_mcr(struct command_context_s *cmd_ctx, - char *cmd, char **args, int argc) -{ - return arm11_handle_mrc_mcr(cmd_ctx, cmd, args, argc, false); -} - static int arm11_mrc_inner(target_t *target, int cpnum, uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm, uint32_t *value, bool read) @@ -2300,10 +2205,6 @@ int arm11_register_commands(struct command_context_s *cmd_ctx) "DEBUG ONLY - Hardware single stepping" " (default: disabled)"); - register_command(cmd_ctx, top_cmd, "mcr", - arm11_handle_mcr, COMMAND_ANY, - "Write Coprocessor register. mcr <jtag_target> <coprocessor> <opcode 1> <CRn> <CRm> <opcode 2> <32bit value to write>. All parameters are numbers only."); - mw_cmd = register_command(cmd_ctx, top_cmd, "memwrite", NULL, COMMAND_ANY, NULL); register_command(cmd_ctx, mw_cmd, "burst", @@ -2315,9 +2216,6 @@ int arm11_register_commands(struct command_context_s *cmd_ctx) "Terminate program if transfer error was found" " (default: enabled)"); - register_command(cmd_ctx, top_cmd, "mrc", - arm11_handle_mrc, COMMAND_ANY, - "Read Coprocessor register. mrc <jtag_target> <coprocessor> <opcode 1> <CRn> <CRm> <opcode 2>. All parameters are numbers only."); register_command(cmd_ctx, top_cmd, "step_irq_enable", arm11_handle_bool_step_irq_enable, COMMAND_ANY, "Enable interrupts while stepping" diff --git a/tcl/board/csb732.cfg b/tcl/board/csb732.cfg index 1787323..9022faf 100644 --- a/tcl/board/csb732.cfg +++ b/tcl/board/csb732.cfg @@ -19,13 +19,13 @@ proc csb732_init { } { # We assume the interpreter latency is enough. # Allow access to all coprocessors - arm11 mcr imx35.cpu 15 0 15 1 0 0x2001 + mcr 15 0 15 1 0 0x2001 # Disable MMU, caches, write buffer - arm11 mcr imx35.cpu 15 0 1 0 0 0x78 + mcr 15 0 1 0 0 0x78 # Grant manager access to all domains - arm11 mcr imx35.cpu 15 0 3 0 0 0xFFFFFFFF + mcr 15 0 3 0 0 0xFFFFFFFF # Set ARM clock to 532 MHz, AHB to 133 MHz mww 0x53F80004 0x1000 diff --git a/tcl/target/c100helper.tcl b/tcl/target/c100helper.tcl index b5e0164..54fe07f 100644 --- a/tcl/target/c100helper.tcl +++ b/tcl/target/c100helper.tcl @@ -436,22 +436,22 @@ proc initC100 {} { # */ # mov r0, #0 # mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - arm11 mcr c100.cpu 15 0 7 7 0 0x0 + mcr 15 0 7 7 0 0x0 # mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - arm11 mcr c100.cpu 15 0 8 7 0 0x0 + mcr 15 0 8 7 0 0x0 # /* # * disable MMU stuff and caches # */ # mrc p15, 0, r0, c1, c0, 0 - arm11 mrc c100.cpu 15 0 1 0 0 + mrc 15 0 1 0 0 # bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) # bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) # orr r0, r0, #0x00000002 @ set bit 2 (A) Align # orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache # orr r0, r0, #0x00400000 @ set bit 22 (U) # mcr p15, 0, r0, c1, c0, 0 - arm11 mcr c100.cpu 15 0 1 0 0 0x401002 + mcr 15 0 1 0 0 0x401002 # This is from bsp_init() in u-boot/boards/mindspeed/ooma-darwin/board.c # APB init # // Setting APB Bus Wait states to 1, set post write diff --git a/tcl/target/imx.cfg b/tcl/target/imx.cfg index 16773fa..bfcc652 100644 --- a/tcl/target/imx.cfg +++ b/tcl/target/imx.cfg @@ -10,7 +10,7 @@ proc setc15 {regs value} { echo [format "set p15 0x%04x, 0x%08x" $regs $value] - arm11 mcr $TARGETNAME 15 [expr ($regs>>12)&0x7] [expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] [expr ($regs>>8)&0x7] $value + mcr 15 [expr ($regs>>12)&0x7] [expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] [expr ($regs>>8)&0x7] $value } |