ETM: add "etm trigger_debug" command

In conjunction with manual register setup, this lets the ETM trigger
cause entry to debug state.   It should make it easier to test and
bugfix the ETM code, by enabling non-trace usage and isolating bugs
specific to thef ETM support.  (One current issue being that trace
data collection using the ETB doesn't yet behave.)

For example, many ARM9 cores with an ETM should be able to implement
four more (simple) breakpoints and two more (simple) watchpoints than
the EmbeddedICE supports.  Or, they should be able to support complex
breakpoints, incorporating ETM sequencer, counters, and/or subroutine
entry/exit criteria int criteria used to trigger debug entry.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

3 files changed, 74 insertions, 4 deletions

diff --git a/NEWS b/NEWS
index efcf8f6..e122912 100644
--- a/NEWS
+++ b/NEWS
@@ -34,6 +34,7 @@ Target Layer:
 		- Exposed DWT registers like cycle counter
 	ETM, ETB
 		- "trigger_percent" command moved ETM --> ETB
+		- "etm trigger_debug" command added
 
 Flash Layer:
 	'flash bank' and 'nand device' take <bank_name> as first argument.
diff --git a/doc/openocd.texi b/doc/openocd.texi
index bb3e51a..d9cb4ea 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -5512,6 +5512,17 @@ trace stream without an image of the code.
 @end itemize
 @end deffn
 
+@deffn Command {etm trigger_debug} (@option{enable}|@option{disable})
+Displays whether ETM triggering debug entry (like a breakpoint) is
+enabled or disabled, after optionally modifying that configuration.
+The default behaviour is @option{disable}.
+Any change takes effect after the next @command{etm start}.
+
+By using script commands to configure ETM registers, you can make the
+processor enter debug state automatically when certain conditions,
+more complex than supported by the breakpoint hardware, happen.
+@end deffn
+
 @subsection ETM Trace Operation
 
 After setting up the ETM, you can use it to collect data.
diff --git a/src/target/etm.c b/src/target/etm.c
index a506d1c..d22bc40 100644
--- a/src/target/etm.c
+++ b/src/target/etm.c
@@ -446,12 +446,15 @@ int etm_setup(struct target *target)
 	etm_ctrl_value = (etm_ctrl_value
 			& ~ETM_PORT_WIDTH_MASK
 			& ~ETM_PORT_MODE_MASK
+			& ~ETM_CTRL_DBGRQ
 			& ~ETM_PORT_CLOCK_MASK)
 		| etm_ctx->control;
 
 	buf_set_u32(etm_ctrl_reg->value, 0, 32, etm_ctrl_value);
 	etm_store_reg(etm_ctrl_reg);
 
+	etm_ctx->control = etm_ctrl_value;
+
 	if ((retval = jtag_execute_queue()) != ERROR_OK)
 		return retval;
 
@@ -1338,8 +1341,6 @@ COMMAND_HANDLER(handle_etm_tracemode_command)
 		if (!etm_ctrl_reg)
 			return ERROR_FAIL;
 
-		etm_get_reg(etm_ctrl_reg);
-
 		etm->control &= ~TRACEMODE_MASK;
 		etm->control |= tracemode & TRACEMODE_MASK;
 
@@ -2016,6 +2017,56 @@ COMMAND_HANDLER(handle_etm_stop_command)
 	return ERROR_OK;
 }
 
+COMMAND_HANDLER(handle_etm_trigger_debug_command)
+{
+	struct target *target;
+	struct arm *arm;
+	struct etm_context *etm;
+
+	target = get_current_target(CMD_CTX);
+	arm = target_to_arm(target);
+	if (!is_arm(arm))
+	{
+		command_print(CMD_CTX, "ETM: %s isn't an ARM",
+				target_name(target));
+		return ERROR_FAIL;
+	}
+
+	etm = arm->etm;
+	if (!etm)
+	{
+		command_print(CMD_CTX, "ETM: no ETM configured for %s",
+				target_name(target));
+		return ERROR_FAIL;
+	}
+
+	if (CMD_ARGC == 1) {
+		struct reg *etm_ctrl_reg;
+		bool dbgrq;
+
+		etm_ctrl_reg = etm_reg_lookup(etm, ETM_CTRL);
+		if (!etm_ctrl_reg)
+			return ERROR_FAIL;
+
+		COMMAND_PARSE_ENABLE(CMD_ARGV[0], dbgrq);
+		if (dbgrq)
+			etm->control |= ETM_CTRL_DBGRQ;
+		else
+			etm->control &= ~ETM_CTRL_DBGRQ;
+
+		/* etm->control will be written to hardware
+		 * the next time an "etm start" is issued.
+		 */
+		buf_set_u32(etm_ctrl_reg->value, 0, 32, etm->control);
+	}
+
+	command_print(CMD_CTX, "ETM: %s debug halt",
+			(etm->control & ETM_CTRL_DBGRQ)
+				? "triggers"
+				: "does not trigger");
+	return ERROR_OK;
+}
+
 COMMAND_HANDLER(handle_etm_analyze_command)
 {
 	struct target *target;
@@ -2112,10 +2163,17 @@ static const struct command_registration etm_exec_command_handlers[] = {
 		.help = "stop ETM trace collection",
 	},
 	{
+		.name = "trigger_debug",
+		.handler = handle_etm_trigger_debug_command,
+		.mode = COMMAND_EXEC,
+		.help = "enable/disable debug entry on trigger",
+		.usage = "(enable | disable)",
+	},
+	{
 		.name = "analyze",
-		.handler = &handle_etm_analyze_command,
+		.handler = handle_etm_analyze_command,
 		.mode = COMMAND_EXEC,
-		.help = "anaylze collected ETM trace",
+		.help = "analyze collected ETM trace",
 	},
 	{
 		.name = "image",