aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTomas Vanek <vanekt@fbl.cz>2016-08-24 11:18:41 +0200
committerPaul Fertser <fercerpav@gmail.com>2016-12-08 12:18:52 +0000
commit25d7ba19c9e70cf5b912f660cf6aaa93d9ca120f (patch)
tree9e7337a735688314f87335ad376f771550a2ceeb
parentbcaf775fc10d88d2c63c06bafada141895318b34 (diff)
downloadriscv-openocd-25d7ba19c9e70cf5b912f660cf6aaa93d9ca120f.zip
riscv-openocd-25d7ba19c9e70cf5b912f660cf6aaa93d9ca120f.tar.gz
riscv-openocd-25d7ba19c9e70cf5b912f660cf6aaa93d9ca120f.tar.bz2
tcl at91samdXX.cfg: update config to current OpenOCD status
Remove comment about workaround of not working 'reset halt' - not needed as 'reset halt' is working as expected @ EDBG with srst_only. Add srst_pulls_trst to reset_config as it no more triggers an error. Change-Id: I47cf445690c46ccfb866900cddbfcaefc8649f82 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3722 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
-rw-r--r--tcl/target/at91samdXX.cfg8
1 files changed, 1 insertions, 7 deletions
diff --git a/tcl/target/at91samdXX.cfg b/tcl/target/at91samdXX.cfg
index 47b4f5f..9a3c292 100644
--- a/tcl/target/at91samdXX.cfg
+++ b/tcl/target/at91samdXX.cfg
@@ -50,13 +50,7 @@ $_TARGETNAME configure -event reset-deassert-post {
}
# SRST (wired to RESET_N) resets debug circuitry
-# srst_pulls_trst is not configured here to avoid an error raised in reset halt
-reset_config srst_gates_jtag
-
-# Atmel's EDBG (on-board cmsis-dap adapter of Xplained kits) cannot
-# stop the MCU before it starts executing code if hardware RESETN
-# line is configured by command "reset_config srst_only"
-# Use "reset_config none" (default) before flash programming.
+reset_config srst_gates_jtag srst_pulls_trst
# Do not use a reset button with other SWD adapter than Atmel's EDBG.
# DSU usually locks MCU in reset state until you issue a reset command