[appendix]
== Formal Memory Model Specifications, Version 0.1
[[mm-formal]]

To facilitate formal analysis of RVWMO, this chapter presents a set of
formalizations using different tools and modeling approaches. Any
discrepancies are unintended; the expectation is that the models
describe exactly the same sets of legal behaviors.

This appendix should be treated as commentary; all normative material is
provided in <<memorymodel>> and in the rest of
the main body of the ISA specification. All currently known
discrepancies are listed in
<<discrepancies>>. Any other
discrepancies are unintentional.

[[alloy]]
=== Formal Axiomatic Specification in Alloy

We present a formal specification of the RVWMO memory model in Alloy
(http://alloy.mit.edu). This model is available online at
https://github.com/daniellustig/riscv-memory-model.

The online material also contains some litmus tests and some examples of
how Alloy can be used to model check some of the mappings in
Section #sec:memory:porting[[sec:memory:porting]].

`  `

....
////////////////////////////////////////////////////////////////////////////////
// =RVWMO PPO=

// Preserved Program Order
fun ppo : Event->Event {
  // same-address ordering
  po_loc :> Store
  + rdw
  + (AMO + StoreConditional) <: rfi

  // explicit synchronization
  + ppo_fence
  + Acquire <: ^po :> MemoryEvent
  + MemoryEvent <: ^po :> Release
  + RCsc <: ^po :> RCsc
  + pair

  // syntactic dependencies
  + addrdep
  + datadep
  + ctrldep :> Store

  // pipeline dependencies
  + (addrdep+datadep).rfi
  + addrdep.^po :> Store
}

// the global memory order respects preserved program order
fact { ppo in ^gmo }
....

`  `

....
////////////////////////////////////////////////////////////////////////////////
// =RVWMO axioms=

// Load Value Axiom
fun candidates[r: MemoryEvent] : set MemoryEvent {
  (r.~^gmo & Store & same_addr[r]) // writes preceding r in gmo
  + (r.^~po & Store & same_addr[r]) // writes preceding r in po
}

fun latest_among[s: set Event] : Event { s - s.~^gmo }

pred LoadValue {
  all w: Store | all r: Load |
    w->r in rf <=> w = latest_among[candidates[r]]
}

// Atomicity Axiom
pred Atomicity {
  all r: Store.~pair |            // starting from the lr,
    no x: Store & same_addr[r] |  // there is no store x to the same addr
      x not in same_hart[r]       // such that x is from a different hart,
      and x in r.~rf.^gmo         // x follows (the store r reads from) in gmo,
      and r.pair in x.^gmo        // and r follows x in gmo
}

// Progress Axiom implicit: Alloy only considers finite executions

pred RISCV_mm { LoadValue and Atomicity /* and Progress */ }
....

`  `

....
////////////////////////////////////////////////////////////////////////////////
// Basic model of memory

sig Hart {  // hardware thread
  start : one Event
}
sig Address {}
abstract sig Event {
  po: lone Event // program order
}

abstract sig MemoryEvent extends Event {
  address: one Address,
  acquireRCpc: lone MemoryEvent,
  acquireRCsc: lone MemoryEvent,
  releaseRCpc: lone MemoryEvent,
  releaseRCsc: lone MemoryEvent,
  addrdep: set MemoryEvent,
  ctrldep: set Event,
  datadep: set MemoryEvent,
  gmo: set MemoryEvent,  // global memory order
  rf: set MemoryEvent
}
sig LoadNormal extends MemoryEvent {} // l{b|h|w|d}
sig LoadReserve extends MemoryEvent { // lr
  pair: lone StoreConditional
}
sig StoreNormal extends MemoryEvent {}       // s{b|h|w|d}
// all StoreConditionals in the model are assumed to be successful
sig StoreConditional extends MemoryEvent {}  // sc
sig AMO extends MemoryEvent {}               // amo
sig NOP extends Event {}

fun Load : Event { LoadNormal + LoadReserve + AMO }
fun Store : Event { StoreNormal + StoreConditional + AMO }

sig Fence extends Event {
  pr: lone Fence, // opcode bit
  pw: lone Fence, // opcode bit
  sr: lone Fence, // opcode bit
  sw: lone Fence  // opcode bit
}
sig FenceTSO extends Fence {}

/* Alloy encoding detail: opcode bits are either set (encoded, e.g.,
 * as f.pr in iden) or unset (f.pr not in iden).  The bits cannot be used for
 * anything else */
fact { pr + pw + sr + sw in iden }
// likewise for ordering annotations
fact { acquireRCpc + acquireRCsc + releaseRCpc + releaseRCsc in iden }
// don't try to encode FenceTSO via pr/pw/sr/sw; just use it as-is
fact { no FenceTSO.(pr + pw + sr + sw) }
....

`  `

....
////////////////////////////////////////////////////////////////////////////////
// =Basic model rules=

// Ordering annotation groups
fun Acquire : MemoryEvent { MemoryEvent.acquireRCpc + MemoryEvent.acquireRCsc }
fun Release : MemoryEvent { MemoryEvent.releaseRCpc + MemoryEvent.releaseRCsc }
fun RCpc : MemoryEvent { MemoryEvent.acquireRCpc + MemoryEvent.releaseRCpc }
fun RCsc : MemoryEvent { MemoryEvent.acquireRCsc + MemoryEvent.releaseRCsc }

// There is no such thing as store-acquire or load-release, unless it's both
fact { Load & Release in Acquire }
fact { Store & Acquire in Release }

// FENCE PPO
fun FencePRSR : Fence { Fence.(pr & sr) }
fun FencePRSW : Fence { Fence.(pr & sw) }
fun FencePWSR : Fence { Fence.(pw & sr) }
fun FencePWSW : Fence { Fence.(pw & sw) }

fun ppo_fence : MemoryEvent->MemoryEvent {
    (Load  <: ^po :> FencePRSR).(^po :> Load)
  + (Load  <: ^po :> FencePRSW).(^po :> Store)
  + (Store <: ^po :> FencePWSR).(^po :> Load)
  + (Store <: ^po :> FencePWSW).(^po :> Store)
  + (Load  <: ^po :> FenceTSO) .(^po :> MemoryEvent)
  + (Store <: ^po :> FenceTSO) .(^po :> Store)
}

// auxiliary definitions
fun po_loc : Event->Event { ^po & address.~address }
fun same_hart[e: Event] : set Event { e + e.^~po + e.^po }
fun same_addr[e: Event] : set Event { e.address.~address }

// initial stores
fun NonInit : set Event { Hart.start.*po }
fun Init : set Event { Event - NonInit }
fact { Init in StoreNormal }
fact { Init->(MemoryEvent & NonInit) in ^gmo }
fact { all e: NonInit | one e.*~po.~start }  // each event is in exactly one hart
fact { all a: Address | one Init & a.~address } // one init store per address
fact { no Init <: po and no po :> Init }
....

`  `

....
// po
fact { acyclic[po] }

// gmo
fact { total[^gmo, MemoryEvent] } // gmo is a total order over all MemoryEvents

//rf
fact { rf.~rf in iden } // each read returns the value of only one write
fact { rf in Store <: address.~address :> Load }
fun rfi : MemoryEvent->MemoryEvent { rf & (*po + *~po) }

//dep
fact { no StoreNormal <: (addrdep + ctrldep + datadep) }
fact { addrdep + ctrldep + datadep + pair in ^po }
fact { datadep in datadep :> Store }
fact { ctrldep.*po in ctrldep }
fact { no pair & (^po :> (LoadReserve + StoreConditional)).^po }
fact { StoreConditional in LoadReserve.pair } // assume all SCs succeed

// rdw
fun rdw : Event->Event {
  (Load <: po_loc :> Load)  // start with all same_address load-load pairs,
  - (~rf.rf)                // subtract pairs that read from the same store,
  - (po_loc.rfi)            // and subtract out "fri-rfi" patterns
}

// filter out redundant instances and/or visualizations
fact { no gmo & gmo.gmo } // keep the visualization uncluttered
fact { all a: Address | some a.~address }

////////////////////////////////////////////////////////////////////////////////
// =Optional: opcode encoding restrictions=

// the list of blessed fences
fact { Fence in
  Fence.pr.sr
  + Fence.pw.sw
  + Fence.pr.pw.sw
  + Fence.pr.sr.sw
  + FenceTSO
  + Fence.pr.pw.sr.sw
}

pred restrict_to_current_encodings {
  no (LoadNormal + StoreNormal) & (Acquire + Release)
}

////////////////////////////////////////////////////////////////////////////////
// =Alloy shortcuts=
pred acyclic[rel: Event->Event] { no iden & ^rel }
pred total[rel: Event->Event, bag: Event] {
  all disj e, e': bag | e->e' in rel + ~rel
  acyclic[rel]
}
....

[[sec:herd]]
=== Formal Axiomatic Specification in Herd

The tool [.sans-serif]#herd# takes a memory model and a litmus test as
input and simulates the execution of the test on top of the memory
model. Memory models are written in the domain specific language Cat.
This section provides two Cat memory model of RVWMO. The first model,
Figure #fig:herd2[[fig:herd2]], follows the _global memory order_,
Chapter #ch:memorymodel[[ch:memorymodel]], definition of RVWMO, as much
as is possible for a Cat model. The second model,
Figure #fig:herd3[[fig:herd3]], is an equivalent, more efficient,
partial order based RVWMO model.

The simulator [.sans-serif]#herd# is part of the [.sans-serif]#diy# tool
suite — see http://diy.inria.fr for software and documentation. The
models and more are available online
at http://diy.inria.fr/cats7/riscv/.

`  `

....
(*************)
(* Utilities *)
(*************)

(* All fence relations *)
let fence.r.r = [R];fencerel(Fence.r.r);[R]
let fence.r.w = [R];fencerel(Fence.r.w);[W]
let fence.r.rw = [R];fencerel(Fence.r.rw);[M]
let fence.w.r = [W];fencerel(Fence.w.r);[R]
let fence.w.w = [W];fencerel(Fence.w.w);[W]
let fence.w.rw = [W];fencerel(Fence.w.rw);[M]
let fence.rw.r = [M];fencerel(Fence.rw.r);[R]
let fence.rw.w = [M];fencerel(Fence.rw.w);[W]
let fence.rw.rw = [M];fencerel(Fence.rw.rw);[M]
let fence.tso =
  let f = fencerel(Fence.tso) in
  ([W];f;[W]) | ([R];f;[M])

let fence = 
  fence.r.r | fence.r.w | fence.r.rw |
  fence.w.r | fence.w.w | fence.w.rw |
  fence.rw.r | fence.rw.w | fence.rw.rw |
  fence.tso

(* Same address, no W to the same address in-between *)
let po-loc-no-w = po-loc \ (po-loc?;[W];po-loc)
(* Read same write *)
let rsw = rf^-1;rf
(* Acquire, or stronger  *)
let AQ = Acq|AcqRel
(* Release or stronger *)
and RL = RelAcqRel
(* All RCsc *)
let RCsc = Acq|Rel|AcqRel
(* Amo events are both R and W, relation rmw relates paired lr/sc *)
let AMO = R & W
let StCond = range(rmw)

(*************)
(* ppo rules *)
(*************)

(* Overlapping-Address Orderings *)
let r1 = [M];po-loc;[W]
and r2 = ([R];po-loc-no-w;[R]) \ rsw
and r3 = [AMO|StCond];rfi;[R]
(* Explicit Synchronization *)
and r4 = fence
and r5 = [AQ];po;[M]
and r6 = [M];po;[RL]
and r7 = [RCsc];po;[RCsc]
and r8 = rmw
(* Syntactic Dependencies *)
and r9 = [M];addr;[M]
and r10 = [M];data;[W]
and r11 = [M];ctrl;[W]
(* Pipeline Dependencies *)
and r12 = [R];(addr|data);[W];rfi;[R]
and r13 = [R];addr;[M];po;[W]

let ppo = r1 | r2 | r3 | r4 | r5 | r6 | r7 | r8 | r9 | r10 | r11 | r12 | r13
....

`  `

....
Total

(* Notice that herd has defined its own rf relation *)

(* Define ppo *)
include "riscv-defs.cat"

(********************************)
(* Generate global memory order *)
(********************************)

let gmo0 = (* precursor: ie build gmo as an total order that include gmo0 *)
  loc & (W\FW) * FW | # Final write after any write to the same location
  ppo |               # ppo compatible
  rfe                 # includes herd external rf (optimization)

(* Walk over all linear extensions of gmo0 *)
with  gmo from linearizations(M\IW,gmo0)

(* Add initial writes upfront -- convenient for computing rfGMO *)
let gmo = gmo | loc & IW * (M\IW)

(**********)
(* Axioms *)
(**********)

(* Compute rf according to the load value axiom, aka rfGMO *)
let WR = loc & ([W];(gmo|po);[R])
let rfGMO = WR \ (loc&([W];gmo);WR)

(* Check equality of herd rf and of rfGMO *)
empty (rf\rfGMO)|(rfGMO\rf) as RfCons

(* Atomicity axiom *)
let infloc = (gmo & loc)^-1
let inflocext = infloc & ext
let winside  = (infloc;rmw;inflocext) & (infloc;rf;rmw;inflocext) & [W]
empty winside as Atomic
....

`  `

....
Partial

(***************)
(* Definitions *)
(***************)

(* Define ppo *)
include "riscv-defs.cat"

(* Compute coherence relation *)
include "cos-opt.cat"

(**********)
(* Axioms *)
(**********)

(* Sc per location *)
acyclic co|rf|fr|po-loc as Coherence

(* Main model axiom *)
acyclic co|rfe|fr|ppo as Model

(* Atomicity axiom *)
empty rmw & (fre;coe) as Atomic
....

[[sec:operational]]
=== An Operational Memory Model

This is an alternative presentation of the RVWMO memory model in
operational style. It aims to admit exactly the same extensional
behavior as the axiomatic presentation: for any given program, admitting
an execution if and only if the axiomatic presentation allows it.

The axiomatic presentation is defined as a predicate on complete
candidate executions. In contrast, this operational presentation has an
abstract microarchitectural flavor: it is expressed as a state machine,
with states that are an abstract representation of hardware machine
states, and with explicit out-of-order and speculative execution (but
abstracting from more implementation-specific microarchitectural details
such as register renaming, store buffers, cache hierarchies, cache
protocols, etc.). As such, it can provide useful intuition. It can also
construct executions incrementally, making it possible to interactively
and randomly explore the behavior of larger examples, while the
axiomatic model requires complete candidate executions over which the
axioms can be checked.

The operational presentation covers mixed-size execution, with
potentially overlapping memory accesses of different power-of-two byte
sizes. Misaligned accesses are broken up into single-byte accesses.

The operational model, together with a fragment of the RISC-V ISA
semantics (RV64I and A), are integrated into the `rmem` exploration tool
(https://github.com/rems-project/rmem). `rmem` can explore litmus tests
(see #sec:litmustests[[sec:litmustests]]) and small ELF binaries
exhaustively, pseudo-randomly and interactively. In `rmem`, the ISA
semantics is expressed explicitly in Sail (see
https://github.com/rems-project/sail for the Sail language, and
https://github.com/rems-project/sail-riscv for the RISC-V ISA model),
and the concurrency semantics is expressed in Lem (see
https://github.com/rems-project/lem for the Lem language).

`rmem` has a command-line interface and a web-interface. The
web-interface runs entirely on the client side, and is provided online
together with a library of litmus tests:
http://www.cl.cam.ac.uk/~pes20/rmem. The command-line interface is
faster than the web-interface, specially in exhaustive mode.

Below is an informal introduction of the model states and transitions.
The description of the formal model starts in the next subsection.

Terminology: In contrast to the axiomatic presentation, here every
memory operation is either a load or a store. Hence, AMOs give rise to
two distinct memory operations, a load and a store. When used in
conjunction with ``instruction``, the terms ``load`` and ``store`` refer
to instructions that give rise to such memory operations. As such, both
include AMO instructions. The term ``acquire`` refers to an instruction
(or its memory operation) with the acquire-RCpc or acquire-RCsc
annotation. The term ``release`` refers to an instruction (or its memory
operation) with the release-RCpc or release-RCsc annotation.

==== Model states

A model state consists of a shared memory and a tuple of hart states.

[cols="^,^,^",]
|===
| |*…* |Hart latexmath:[$n$]

|latexmath:[$\big\uparrow$] latexmath:[$\big\downarrow$] |
|latexmath:[$\big\uparrow$] latexmath:[$\big\downarrow$]

|Shared Memory | |
|===

The shared memory state records all the memory store operations that
have propagated so far, in the order they propagated (this can be made
more efficient, but for simplicity of the presentation we keep it this
way).

Each hart state consists principally of a tree of instruction instances,
some of which have been _finished_, and some of which have not.
Non-finished instruction instances can be subject to _restart_, e.g. if
they depend on an out-of-order or speculative load that turns out to be
unsound.

Conditional branch and indirect jump instructions may have multiple
successors in the instruction tree. When such instruction is finished,
any un-taken alternative paths are discarded.

Each instruction instance in the instruction tree has a state that
includes an execution state of the intra-instruction semantics (the ISA
pseudocode for this instruction). The model uses a formalization of the
intra-instruction semantics in Sail. One can think of the execution
state of an instruction as a representation of the pseudocode control
state, pseudocode call stack, and local variable values. An instruction
instance state also includes information about the instance’s memory and
register footprints, its register reads and writes, its memory
operations, whether it is finished, etc.

==== Model transitions

The model defines, for any model state, the set of allowed transitions,
each of which is a single atomic step to a new abstract machine state.
Execution of a single instruction will typically involve many
transitions, and they may be interleaved in operational-model execution
with transitions arising from other instructions. Each transition arises
from a single instruction instance; it will change the state of that
instance, and it may depend on or change the rest of its hart state and
the shared memory state, but it does not depend on other hart states,
and it will not change them. The transitions are introduced below and
defined in Section #sec:omm:transitions[1.3.5], with a precondition and
a construction of the post-transition model state for each.

Transitions for all instructions:

* : This transition represents a fetch and decode of a new instruction
instance, as a program order successor of a previously fetched
instruction instance (or the initial fetch address).
+
The model assumes the instruction memory is fixed; it does not describe
the behavior of self-modifying code. In particular, the transition does
not generate memory load operations, and the shared memory is not
involved in the transition. Instead, the model depends on an external
oracle that provides an opcode when given a memory location.
* : This is a write of a register value.
* : This is a read of a register value from the most recent
program-order-predecessor instruction instance that writes to that
register.
* : This covers pseudocode internal computation: arithmetic, function
calls, etc.
* : At this point the instruction pseudocode is done, the instruction
cannot be restarted, memory accesses cannot be discarded, and all memory
effects have taken place. For conditional branch and indirect jump
instructions, any program order successors that were fetched from an
address that is not the one that was written to the _pc_ register are
discarded, together with the sub-tree of instruction instances below
them.

Transitions specific to load instructions:

* : At this point the memory footprint of the load instruction is
provisionally known (it could change if earlier instructions are
restarted) and its individual memory load operations can start being
satisfied.
* : This partially or entirely satisfies a single memory load operation
by forwarding, from program-order-previous memory store operations.
* : This entirely satisfies the outstanding slices of a single memory
load operation, from memory.
* : At this point all the memory load operations of the instruction have
been entirely satisfied and the instruction pseudocode can continue
executing. A load instruction can be subject to being restarted until
the transition. But, under some conditions, the model might treat a load
instruction as non-restartable even before it is finished (e.g. see ).

Transitions specific to store instructions:

* : At this point the memory footprint of the store is provisionally
known.
* : At this point the memory store operations have their values and
program-order-successor memory load operations can be satisfied by
forwarding from them.
* : At this point the store operations are guaranteed to happen (the
instruction can no longer be restarted or discarded), and they can start
being propagated to memory.
* : This propagates a single memory store operation to memory.
* : At this point all the memory store operations of the instruction
have been propagated to memory, and the instruction pseudocode can
continue executing.

Transitions specific to `sc` instructions:

* : This causes the `sc` to fail, either a spontaneous fail or because
it is not paired with a program-order-previous `lr`.
* : This transition indicates the `sc` is paired with an `lr` and might
succeed.
* : This is an atomic execution of the transitions and , it is enabled
only if the stores from which the `lr` read from have not been
overwritten.
* : This causes the `sc` to fail, either a spontaneous fail or because
the stores from which the `lr` read from have been overwritten.

Transitions specific to AMO instructions:

* : This is an atomic execution of all the transitions needed to satisfy
the load operation, do the required arithmetic, and propagate the store
operation.

Transitions specific to fence instructions:

* {blank}

The transitions labeled latexmath:[$\circ$] can always be taken eagerly,
as soon as their precondition is satisfied, without excluding other
behavior; the latexmath:[$\bullet$] cannot. Although is marked with a
latexmath:[$\bullet$], it can be taken eagerly as long as it is not
taken infinitely many times.

An instance of a non-AMO load instruction, after being fetched, will
typically experience the following transitions in this order:

. {blank}
. {blank}
. and/or (as many as needed to satisfy all the load operations of the
instance)
. {blank}
. {blank}
. {blank}

Before, between and after the transitions above, any number of
transitions may appear. In addition, a transition for fetching the
instruction in the next program location will be available until it is
taken.

This concludes the informal description of the operational model. The
following sections describe the formal operational model.

[[sec:omm:pseudocode_exec]]
==== Intra-instruction Pseudocode Execution

The intra-instruction semantics for each instruction instance is
expressed as a state machine, essentially running the instruction
pseudocode. Given a pseudocode execution state, it computes the next
state. Most states identify a pending memory or register operation,
requested by the pseudocode, which the memory model has to do. The
states are (this is a tagged union; tags in small-caps):

[cols="<,<",]
|===
|Load_mem(_kind_, _address_, _size_, _load_continuation_) |memory load
operation

|Early_sc_fail(_res_continuation_) |allow `sc` to fail early

|Store_ea(_kind_, _address_, _size_, _next_state_) |memory store
effective address

|Store_memv(_mem_value_, _store_continuation_) |memory store value

|Fence(_kind_, _next_state_) |fence

|Read_reg(_reg_name_, _read_continuation_) |register read

|Write_reg(_reg_name_, _reg_value_, _next_state_) |register write

|Internal(_next_state_) |pseudocode internal step

|Done |end of pseudocode
|===

Here:

_mem_value_ and _reg_value_ are lists of bytes;

_address_ is an integer of XLEN bits;

for load/store, _kind_ identifies whether it is `lr/sc`,
acquire-RCpc/release-RCpc, acquire-RCsc/release-RCsc,
acquire-release-RCsc;

for fence, _kind_ identifies whether it is a normal or TSO, and (for
normal fences) the predecessor and successor ordering bits;

_reg_name_ identifies a register and a slice thereof (start and end bit
indices); and

the continuations describe how the instruction instance will continue
for each value that might be provided by the surrounding memory model
(the _load_continuation_ and _read_continuation_ take the value loaded
from memory and read from the previous register write, the
_store_continuation_ takes _false_ for an `sc` that failed and _true_ in
all other cases, and _res_continuation_ takes _false_ if the `sc` fails
and _true_ otherwise).

For example, given the load instruction `lw x1,0(x2)`, an execution will
typically go as follows. The initial execution state will be computed
from the pseudocode for the given opcode. This can be expected to be
Read_reg(`x2`, _read_continuation_). Feeding the most recently written
value of register `x2` (the instruction semantics will be blocked if
necessary until the register value is available), say `0x4000`, to
_read_continuation_ returns Load_mem(`plain_load`, `0x4000`, `4`,
_load_continuation_). Feeding the 4-byte value loaded from memory
location `0x4000`, say `0x42`, to _load_continuation_ returns
Write_reg(`x1`, `0x42`, Done). Many Internal(_next_state_) states may
appear before and between the states above.

Notice that writing to memory is split into two steps, Store_ea and
Store_memv: the first one makes the memory footprint of the store
provisionally known, and the second one adds the value to be stored. We
ensure these are paired in the pseudocode (Store_ea followed by
Store_memv), but there may be other steps between them.

It is observable that the Store_ea can occur before the value to be
stored is determined. For example, for the litmus test
LB+fence.r.rw+data-po to be allowed by the operational model (as it is
by RVWMO), the first store in Hart 1 has to take the Store_ea step
before its value is determined, so that the second store can see it is
to a non-overlapping memory footprint, allowing the second store to be
committed out of order without violating coherence.

The pseudocode of each instruction performs at most one store or one
load, except for AMOs that perform exactly one load and one store. Those
memory accesses are then split apart into the architecturally atomic
units by the hart semantics (see and below).

Informally, each bit of a register read should be satisfied from a
register write by the most recent (in program order) instruction
instance that can write that bit (or from the hart’s initial register
state if there is no such write). Hence, it is essential to know the
register write footprint of each instruction instance, which we
calculate when the instruction instance is created (see the action of
below). We ensure in the pseudocode that each instruction does at most
one register write to each register bit, and also that it does not try
to read a register value it just wrote.

Data-flow dependencies (address and data) in the model emerge from the
fact that each register read has to wait for the appropriate register
write to be executed (as described above).

[[sec:omm:inst_state]]
==== Instruction Instance State

Each instruction instance latexmath:[$i$] has a state comprising:

* _program_loc_, the memory address from which the instruction was
fetched;
* _instruction_kind_, identifying whether this is a load, store, AMO,
fence, branch/jump or a `simple' instruction (this also includes a
_kind_ similar to the one described for the pseudocode execution
states);
* _src_regs_, the set of source _reg_name_s (including system
registers), as statically determined from the pseudocode of the
instruction;
* _dst_regs_, the destination _reg_name_s (including system registers),
as statically determined from the pseudocode of the instruction;
* _pseudocode_state_ (or sometimes just `state' for short), one of (this
is a tagged union; tags in small-caps):
+
[cols="<,<",]
|===
|Plain(_isa_state_) |ready to make a pseudocode transition

|Pending_mem_loads(_load_continuation_) |requesting memory load
operation(s)

|Pending_mem_stores(_store_continuation_) |requesting memory store
operation(s)
|===
* _reg_reads_, the register reads the instance has performed, including,
for each one, the register write slices it read from;
* _reg_writes_, the register writes the instance has performed;
* _mem_loads_, a set of memory load operations, and for each one the
as-yet-unsatisfied slices (the byte indices that have not been satisfied
yet), and, for the satisfied slices, the store slices (each consisting
of a memory store operation and subset of its byte indices) that
satisfied it.
* _mem_stores_, a set of memory store operations, and for each one a
flag that indicates whether it has been propagated (passed to the shared
memory) or not.
* information recording whether the instance is committed, finished,
etc.

Each memory load operation includes a memory footprint (address and
size). Each memory store operations includes a memory footprint, and,
when available, a value.

A load instruction instance with a non-empty _mem_loads_, for which all
the load operations are satisfied (i.e. there are no unsatisfied load
slices) is said to be _entirely satisfied_.

Informally, an instruction instance is said to have _fully determined
data_ if the load (and `sc`) instructions feeding its source registers
are finished. Similarly, it is said to have a _fully determined memory
footprint_ if the load (and `sc`) instructions feeding its memory
operation address register are finished. Formally, we first define the
notion of _fully determined register write_: a register write
latexmath:[$w$] from _reg_writes_ of instruction instance
latexmath:[$i$] is said to be _fully determined_ if one of the following
conditions hold:

. latexmath:[$i$] is finished; or
. the value written by latexmath:[$w$] is not affected by a memory
operation that latexmath:[$i$] has made (i.e. a value loaded from memory
or the result of `sc`), and, for every register read that
latexmath:[$i$] has made, that affects latexmath:[$w$], the register
write from which latexmath:[$i$] read is fully determined (or
latexmath:[$i$] read from the initial register state).

Now, an instruction instance latexmath:[$i$] is said to have _fully
determined data_ if for every register read latexmath:[$r$] from
_reg_reads_, the register writes that latexmath:[$r$] reads from are
fully determined. An instruction instance latexmath:[$i$] is said to
have a _fully determined memory footprint_ if for every register read
latexmath:[$r$] from _reg_reads_ that feeds into latexmath:[$i$]’s
memory operation address, the register writes that latexmath:[$r$] reads
from are fully determined.

The `rmem` tool records, for every register write, the set of register
writes from other instructions that have been read by this instruction
at the point of performing the write. By carefully arranging the
pseudocode of the instructions covered by the tool we were able to make
it so that this is exactly the set of register writes on which the write
depends on.

==== Hart State

The model state of a single hart comprises:

* _hart_id_, a unique identifier of the hart;
* _initial_register_state_, the initial register value for each
register;
* _initial_fetch_address_, the initial instruction fetch address;
* _instruction_tree_, a tree of the instruction instances that have been
fetched (and not discarded), in program order.

==== Shared Memory State

The model state of the shared memory comprises a list of memory store
operations, in the order they propagated to the shared memory.

When a store operation is propagated to the shared memory it is simply
added to the end of the list. When a load operation is satisfied from
memory, for each byte of the load operation, the most recent
corresponding store slice is returned.

For most purposes, it is simpler to think of the shared memory as an
array, i.e., a map from memory locations to memory store operation
slices, where each memory location is mapped to a one-byte slice of the
most recent memory store operation to that location. However, this
abstraction is not detailed enough to properly handle the `sc`
instruction. The RVWMO allows store operations from the same hart as the
`sc` to intervene between the store operation of the `sc` and the store
operations the paired `lr` read from. To allow such store operations to
intervene, and forbid others, the array abstraction must be extended to
record more information. Here, we use a list as it is very simple, but a
more efficient and scalable implementations should probably use
something better.

[[sec:omm:transitions]]
==== Transitions

Each of the paragraphs below describes a single kind of system
transition. The description starts with a condition over the current
system state. The transition can be taken in the current state only if
the condition is satisfied. The condition is followed by an action that
is applied to that state when the transition is taken, in order to
generate the new system state.

[[omm:fetch]]
===== Fetch instruction

A possible program-order-successor of instruction instance
latexmath:[$i$] can be fetched from address _loc_ if:

. it has not already been fetched, i.e., none of the immediate
successors of latexmath:[$i$] in the hart’s _instruction_tree_ are from
_loc_; and
. if latexmath:[$i$]’s pseudocode has already written an address to
_pc_, then _loc_ must be that address, otherwise _loc_ is:
* for a conditional branch, the successor address or the branch target
address;
* for a (direct) jump and link instruction (`jal`), the target address;
* for an indirect jump instruction (`jalr`), any address; and
* for any other instruction, latexmath:[$i.\textit{program\_loc}+4$].

Action: construct a freshly initialized instruction instance
latexmath:[$i'$] for the instruction in the program memory at _loc_,
with state Plain(_isa_state_), computed from the instruction pseudocode,
including the static information available from the pseudocode such as
its _instruction_kind_, _src_regs_, and _dst_regs_, and add
latexmath:[$i'$] to the hart’s _instruction_tree_ as a successor of
latexmath:[$i$].

The possible next fetch addresses (_loc_) are available immediately
after fetching latexmath:[$i$] and the model does not need to wait for
the pseudocode to write to _pc_; this allows out-of-order execution, and
speculation past conditional branches and jumps. For most instructions
these addresses are easily obtained from the instruction pseudocode. The
only exception to that is the indirect jump instruction (`jalr`), where
the address depends on the value held in a register. In principle the
mathematical model should allow speculation to arbitrary addresses here.
The exhaustive search in the `rmem` tool handles this by running the
exhaustive search multiple times with a growing set of possible next
fetch addresses for each indirect jump. The initial search uses empty
sets, hence there is no fetch after indirect jump instruction until the
pseudocode of the instruction writes to _pc_, and then we use that value
for fetching the next instruction. Before starting the next iteration of
exhaustive search, we collect for each indirect jump (grouped by code
location) the set of values it wrote to _pc_ in all the executions in
the previous search iteration, and use that as possible next fetch
addresses of the instruction. This process terminates when no new fetch
addresses are detected.

[[omm:initiate_load]]
===== Initiate memory load operations

An instruction instance latexmath:[$i$] in state Plain(Load_mem(_kind_,
_address_, _size_, _load_continuation_)) can always initiate the
corresponding memory load operations. Action:

. Construct the appropriate memory load operations latexmath:[$mlos$]:
* if _address_ is aligned to _size_ then latexmath:[$mlos$] is a single
memory load operation of _size_ bytes from _address_;
* otherwise, latexmath:[$mlos$] is a set of _size_ memory load
operations, each of one byte, from the addresses
latexmath:[$\textit{address}\ldots\textit{address}+\textit{size}-1$].
. set _mem_loads_ of latexmath:[$i$] to latexmath:[$mlos$]; and
. update the state of latexmath:[$i$] to
Pending_mem_loads(_load_continuation_).

In Section #sec:rvwmo:primitives[[sec:rvwmo:primitives]] it is said that
misaligned memory accesses may be decomposed at any granularity. Here we
decompose them to one-byte accesses as this granularity subsumes all
others.

[[omm:sat_by_forwarding]]
===== Satisfy memory load operation by forwarding from unpropagated stores

For a non-AMO load instruction instance latexmath:[$i$] in state
Pending_mem_loads(_load_continuation_), and a memory load operation
latexmath:[$mlo$] in latexmath:[$i.\textit{mem\_loads}$] that has
unsatisfied slices, the memory load operation can be partially or
entirely satisfied by forwarding from unpropagated memory store
operations by store instruction instances that are program-order-before
latexmath:[$i$] if:

. all program-order-previous `fence` instructions with `.sr` and `.pw`
set are finished;
. for every program-order-previous `fence` instruction, latexmath:[$f$],
with `.sr` and `.pr` set, and `.pw` not set, if latexmath:[$f$] is not
finished then all load instructions that are program-order-before
latexmath:[$f$] are entirely satisfied;
. for every program-order-previous `fence.tso` instruction,
latexmath:[$f$], that is not finished, all load instructions that are
program-order-before latexmath:[$f$] are entirely satisfied;
. if latexmath:[$i$] is a load-acquire-RCsc, all program-order-previous
store-releases-RCsc are finished;
. if latexmath:[$i$] is a load-acquire-release, all
program-order-previous instructions are finished;
. all non-finished program-order-previous load-acquire instructions are
entirely satisfied; and
. all program-order-previous store-acquire-release instructions are
finished;

Let latexmath:[$msoss$] be the set of all unpropagated memory store
operation slices from non-`sc` store instruction instances that are
program-order-before latexmath:[$i$] and have already calculated the
value to be stored, that overlap with the unsatisfied slices of
latexmath:[$mlo$], and which are not superseded by intervening store
operations or store operations that are read from by an intervening
load. The last condition requires, for each memory store operation slice
latexmath:[$msos$] in latexmath:[$msoss$] from instruction
latexmath:[$i'$]:

that there is no store instruction program-order-between latexmath:[$i$]
and latexmath:[$i'$] with a memory store operation overlapping
latexmath:[$msos$]; and

that there is no load instruction program-order-between latexmath:[$i$]
and latexmath:[$i'$] that was satisfied from an overlapping memory store
operation slice from a different hart.

Action:

. update latexmath:[$i.\textit{mem\_loads}$] to indicate that
latexmath:[$mlo$] was satisfied by latexmath:[$msoss$]; and
. restart any speculative instructions which have violated coherence as
a result of this, i.e., for every non-finished instruction
latexmath:[$i'$] that is a program-order-successor of latexmath:[$i$],
and every memory load operation latexmath:[$mlo'$] of latexmath:[$i'$]
that was satisfied from latexmath:[$msoss'$], if there exists a memory
store operation slice latexmath:[$msos'$] in latexmath:[$msoss'$], and
an overlapping memory store operation slice from a different memory
store operation in latexmath:[$msoss$], and latexmath:[$msos'$] is not
from an instruction that is a program-order-successor of
latexmath:[$i$], restart latexmath:[$i'$] and its _restart-dependents_.

Where, the _restart-dependents_ of instruction latexmath:[$j$] are:

program-order-successors of latexmath:[$j$] that have data-flow
dependency on a register write of latexmath:[$j$];

program-order-successors of latexmath:[$j$] that have a memory load
operation that reads from a memory store operation of latexmath:[$j$]
(by forwarding);

if latexmath:[$j$] is a load-acquire, all the program-order-successors
of latexmath:[$j$];

if latexmath:[$j$] is a load, for every `fence`, latexmath:[$f$], with
`.sr` and `.pr` set, and `.pw` not set, that is a
program-order-successor of latexmath:[$j$], all the load instructions
that are program-order-successors of latexmath:[$f$];

if latexmath:[$j$] is a load, for every `fence.tso`, latexmath:[$f$],
that is a program-order-successor of latexmath:[$j$], all the load
instructions that are program-order-successors of latexmath:[$f$]; and

(recursively) all the restart-dependents of all the instruction
instances above.

Forwarding memory store operations to a memory load might satisfy only
some slices of the load, leaving other slices unsatisfied.

A program-order-previous store operation that was not available when
taking the transition above might make latexmath:[$msoss$] provisionally
unsound (violating coherence) when it becomes available. That store will
prevent the load from being finished (see ), and will cause it to
restart when that store operation is propagated (see ).

A consequence of the transition condition above is that
store-release-RCsc memory store operations cannot be forwarded to
load-acquire-RCsc instructions: latexmath:[$msoss$] does not include
memory store operations from finished stores (as those must be
propagated memory store operations), and the condition above requires
all program-order-previous store-releases-RCsc to be finished when the
load is acquire-RCsc.

[[omm:sat_from_mem]]
===== Satisfy memory load operation from memory

For an instruction instance latexmath:[$i$] of a non-AMO load
instruction or an AMO instruction in the context of the ```` transition,
any memory load operation latexmath:[$mlo$] in
latexmath:[$i.\textit{mem\_loads}$] that has unsatisfied slices, can be
satisfied from memory if all the conditions of are satisfied. Action:
let latexmath:[$msoss$] be the memory store operation slices from memory
covering the unsatisfied slices of latexmath:[$mlo$], and apply the
action of .

Note that might leave some slices of the memory load operation
unsatisfied, those will have to be satisfied by taking the transition
again, or taking . , on the other hand, will always satisfy all the
unsatisfied slices of the memory load operation.

[[omm:complete_loads]]
===== Complete load operations

A load instruction instance latexmath:[$i$] in state
Pending_mem_loads(_load_continuation_) can be completed (not to be
confused with finished) if all the memory load operations
latexmath:[$i.\textit{mem\_loads}$] are entirely satisfied (i.e. there
are no unsatisfied slices). Action: update the state of latexmath:[$i$]
to Plain(_load_continuation(mem_value)_), where _mem_value_ is assembled
from all the memory store operation slices that satisfied
latexmath:[$i.\textit{mem\_loads}$].

[[omm:early_sc_fail]]
===== Early `sc` fail

An `sc` instruction instance latexmath:[$i$] in state
Plain(Early_sc_fail(_res_continuation_)) can always be made to fail.
Action: update the state of latexmath:[$i$] to
Plain(_res_continuation(false)_).

[[omm:paired_sc]]
===== Paired `sc`

An `sc` instruction instance latexmath:[$i$] in state
Plain(Early_sc_fail(_res_continuation_)) can continue its (potentially
successful) execution if latexmath:[$i$] is paired with an `lr`. Action:
update the state of latexmath:[$i$] to Plain(_res_continuation(true)_).

[[omm:initiate_store_footprint]]
===== Initiate memory store operation footprints

An instruction instance latexmath:[$i$] in state Plain(Store_ea(_kind_,
_address_, _size_, _next_state_)) can always announce its pending memory
store operation footprint. Action:

. construct the appropriate memory store operations latexmath:[$msos$]
(without the store value):
* if _address_ is aligned to _size_ then latexmath:[$msos$] is a single
memory store operation of _size_ bytes to _address_;
* otherwise, latexmath:[$msos$] is a set of _size_ memory store
operations, each of one-byte size, to the addresses
latexmath:[$\textit{address}\ldots\textit{address}+\textit{size}-1$].
. set latexmath:[$i.\textit{mem\_stores}$] to latexmath:[$msos$]; and
. update the state of latexmath:[$i$] to Plain(_next_state_).

Note that after taking the transition above the memory store operations
do not yet have their values. The importance of splitting this
transition from the transition below is that it allows other
program-order-successor store instructions to observe the memory
footprint of this instruction, and if they don’t overlap, propagate out
of order as early as possible (i.e. before the data register value
becomes available).

[[omm:instantiate_store_value]]
===== Instantiate memory store operation values

An instruction instance latexmath:[$i$] in state
Plain(Store_memv(_mem_value_, _store_continuation_)) can always
instantiate the values of the memory store operations
latexmath:[$i.\textit{mem\_stores}$]. Action:

. split _mem_value_ between the memory store operations
latexmath:[$i.\textit{mem\_stores}$]; and
. update the state of latexmath:[$i$] to
Pending_mem_stores(_store_continuation_).

[[omm:commit_stores]]
===== Commit store instruction

An uncommitted instruction instance latexmath:[$i$] of a non-`sc` store
instruction or an `sc` instruction in the context of the ````
transition, in state Pending_mem_stores(_store_continuation_), can be
committed (not to be confused with propagated) if:

. latexmath:[$i$] has fully determined data;
. all program-order-previous conditional branch and indirect jump
instructions are finished;
. all program-order-previous `fence` instructions with `.sw` set are
finished;
. all program-order-previous `fence.tso` instructions are finished;
. all program-order-previous load-acquire instructions are finished;
. all program-order-previous store-acquire-release instructions are
finished;
. if latexmath:[$i$] is a store-release, all program-order-previous
instructions are finished;
. [#omm:commit_store:prev_addrs]#[omm:commit_store:prev_addrs]# all
program-order-previous memory access instructions have a fully
determined memory footprint;
. [#omm:commit_store:prev_stores]#[omm:commit_store:prev_stores]# all
program-order-previous store instructions, except for `sc` that failed,
have initiated and so have non-empty _mem_stores_; and
. [#omm:commit_store:prev_loads]#[omm:commit_store:prev_loads]# all
program-order-previous load instructions have initiated and so have
non-empty _mem_loads_.

Action: record that latexmath:[$i$] is committed.

Notice that if condition
#omm:commit_store:prev_addrs[[omm:commit_store:prev_addrs]] is satisfied
the conditions
#omm:commit_store:prev_stores[[omm:commit_store:prev_stores]] and
#omm:commit_store:prev_loads[[omm:commit_store:prev_loads]] are also
satisfied, or will be satisfied after taking some eager transitions.
Hence, requiring them does not strengthen the model. By requiring them,
we guarantee that previous memory access instructions have taken enough
transitions to make their memory operations visible for the condition
check of , which is the next transition the instruction will take,
making that condition simpler.

[[omm:prop_store]]
===== Propagate store operation

For a committed instruction instance latexmath:[$i$] in state
Pending_mem_stores(_store_continuation_), and an unpropagated memory
store operation latexmath:[$mso$] in
latexmath:[$i.\textit{mem\_stores}$], latexmath:[$mso$] can be
propagated if:

. all memory store operations of program-order-previous store
instructions that overlap with latexmath:[$mso$] have already
propagated;
. all memory load operations of program-order-previous load instructions
that overlap with latexmath:[$mso$] have already been satisfied, and
(the load instructions) are _non-restartable_ (see definition below);
and
. all memory load operations that were satisfied by forwarding
latexmath:[$mso$] are entirely satisfied.

Where a non-finished instruction instance latexmath:[$j$] is
_non-restartable_ if:

. there does not exist a store instruction latexmath:[$s$] and an
unpropagated memory store operation latexmath:[$mso$] of latexmath:[$s$]
such that applying the action of the ```` transition to
latexmath:[$mso$] will result in the restart of latexmath:[$j$]; and
. there does not exist a non-finished load instruction latexmath:[$l$]
and a memory load operation latexmath:[$mlo$] of latexmath:[$l$] such
that applying the action of the ````/```` transition (even if
latexmath:[$mlo$] is already satisfied) to latexmath:[$mlo$] will result
in the restart of latexmath:[$j$].

Action:

. update the shared memory state with latexmath:[$mso$];
. update latexmath:[$i.\textit{mem\_stores}$] to indicate that
latexmath:[$mso$] was propagated; and
. restart any speculative instructions which have violated coherence as
a result of this, i.e., for every non-finished instruction
latexmath:[$i'$] program-order-after latexmath:[$i$] and every memory
load operation latexmath:[$mlo'$] of latexmath:[$i'$] that was satisfied
from latexmath:[$msoss'$], if there exists a memory store operation
slice latexmath:[$msos'$] in latexmath:[$msoss'$] that overlaps with
latexmath:[$mso$] and is not from latexmath:[$mso$], and
latexmath:[$msos'$] is not from a program-order-successor of
latexmath:[$i$], restart latexmath:[$i'$] and its _restart-dependents_
(see ).

[[omm:commit_sc]]
===== Commit and propagate store operation of an `sc`

An uncommitted `sc` instruction instance latexmath:[$i$], from hart
latexmath:[$h$], in state Pending_mem_stores(_store_continuation_), with
a paired `lr` latexmath:[$i'$] that has been satisfied by some store
slices latexmath:[$msoss$], can be committed and propagated at the same
time if:

. latexmath:[$i'$] is finished;
. every memory store operation that has been forwarded to
latexmath:[$i'$] is propagated;
. the conditions of is satisfied;
. the conditions of is satisfied (notice that an `sc` instruction can
only have one memory store operation); and
. for every store slice latexmath:[$msos$] from latexmath:[$msoss$],
latexmath:[$msos$] has not been overwritten, in the shared memory, by a
store that is from a hart that is not latexmath:[$h$], at any point
since latexmath:[$msos$] was propagated to memory.

Action:

. apply the actions of ; and
. apply the action of .

[[omm:late_sc_fail]]
===== Late `sc` fail

An `sc` instruction instance latexmath:[$i$] in state
Pending_mem_stores(_store_continuation_), that has not propagated its
memory store operation, can always be made to fail. Action:

. clear latexmath:[$i.\textit{mem\_stores}$]; and
. update the state of latexmath:[$i$] to
Plain(_store_continuation(false)_).

For efficiency, the `rmem` tool allows this transition only when it is
not possible to take the transition. This does not affect the set of
allowed final states, but when explored interactively, if the `sc`
should fail one should use the transition instead of waiting for this
transition.

[[omm:complete_stores]]
===== Complete store operations

A store instruction instance latexmath:[$i$] in state
Pending_mem_stores(_store_continuation_), for which all the memory store
operations in latexmath:[$i.\textit{mem\_stores}$] have been propagated,
can always be completed (not to be confused with finished). Action:
update the state of latexmath:[$i$] to
Plain(_store_continuation(true)_).

[[omm:do_amo]]
===== Satisfy, commit and propagate operations of an AMO

An AMO instruction instance latexmath:[$i$] in state
Pending_mem_loads(_load_continuation_) can perform its memory access if
it is possible to perform the following sequence of transitions with no
intervening transitions:

. {blank}
. {blank}
. (zero or more times)
. {blank}
. {blank}
. {blank}
. {blank}

and in addition, the condition of , with the exception of not requiring
latexmath:[$i$] to be in state Plain(Done), holds after those
transitions. Action: perform the above sequence of transitions (this
does not include ), one after the other, with no intervening
transitions.

Notice that program-order-previous stores cannot be forwarded to the
load of an AMO. This is simply because the sequence of transitions above
does not include the forwarding transition. But even if it did include
it, the sequence will fail when trying to do the transition, as this
transition requires all program-order-previous store operations to
overlapping memory footprints to be propagated, and forwarding requires
the store operation to be unpropagated.

In addition, the store of an AMO cannot be forwarded to a
program-order-successor load. Before taking the transition above, the
store operation of the AMO does not have its value and therefore cannot
be forwarded; after taking the transition above the store operation is
propagated and therefore cannot be forwarded.

[[omm:commit_fence]]
===== Commit fence

A fence instruction instance latexmath:[$i$] in state
Plain(Fence(_kind_, _next_state_)) can be committed if:

. if latexmath:[$i$] is a normal fence and it has `.pr` set, all
program-order-previous load instructions are finished;
. if latexmath:[$i$] is a normal fence and it has `.pw` set, all
program-order-previous store instructions are finished; and
. if latexmath:[$i$] is a `fence.tso`, all program-order-previous load
and store instructions are finished.

Action:

. record that latexmath:[$i$] is committed; and
. update the state of latexmath:[$i$] to Plain(_next_state_).

[[omm:reg_read]]
===== Register read

An instruction instance latexmath:[$i$] in state
Plain(Read_reg(_reg_name_, _read_cont_)) can do a register read of
_reg_name_ if every instruction instance that it needs to read from has
already performed the expected _reg_name_ register write.

Let _read_sources_ include, for each bit of _reg_name_, the write to
that bit by the most recent (in program order) instruction instance that
can write to that bit, if any. If there is no such instruction, the
source is the initial register value from _initial_register_state_. Let
_reg_value_ be the value assembled from _read_sources_. Action:

. add _reg_name_ to latexmath:[$i.\textit{reg\_reads}$] with
_read_sources_ and _reg_value_; and
. update the state of latexmath:[$i$] to Plain(_read_cont(reg_value)_).

[[omm:reg_write]]
===== Register write

An instruction instance latexmath:[$i$] in state
Plain(Write_reg(_reg_name_, _reg_value_, _next_state_)) can always do a
_reg_name_ register write. Action:

. add _reg_name_ to latexmath:[$i.\textit{reg\_writes}$] with
latexmath:[$deps$] and _reg_value_; and
. update the state of latexmath:[$i$] to Plain(_next_state_).

where latexmath:[$deps$] is a pair of the set of all _read_sources_ from
latexmath:[$i.\textit{reg\_reads}$], and a flag that is true iff
latexmath:[$i$] is a load instruction instance that has already been
entirely satisfied.

[[omm:sail_interp]]
===== Pseudocode internal step

An instruction instance latexmath:[$i$] in state
Plain(Internal(_next_state_)) can always do that pseudocode-internal
step. Action: update the state of latexmath:[$i$] to
Plain(_next_state_).

[[omm:finish]]
===== Finish instruction

A non-finished instruction instance latexmath:[$i$] in state Plain(Done)
can be finished if:

. if latexmath:[$i$] is a load instruction:
.. all program-order-previous load-acquire instructions are finished;
.. all program-order-previous `fence` instructions with `.sr` set are
finished;
.. for every program-order-previous `fence.tso` instruction,
latexmath:[$f$], that is not finished, all load instructions that are
program-order-before latexmath:[$f$] are finished; and
.. it is guaranteed that the values read by the memory load operations
of latexmath:[$i$] will not cause coherence violations, i.e., for any
program-order-previous instruction instance latexmath:[$i'$], let
latexmath:[$\textit{cfp}$] be the combined footprint of propagated
memory store operations from store instructions program-order-between
latexmath:[$i$] and latexmath:[$i'$], and _fixed memory store
operations_ that were forwarded to latexmath:[$i$] from store
instructions program-order-between latexmath:[$i$] and latexmath:[$i'$]
including latexmath:[$i'$], and let
latexmath:[$\overline{\textit{cfp}}$] be the complement of
latexmath:[$\textit{cfp}$] in the memory footprint of latexmath:[$i$].
If latexmath:[$\overline{\textit{cfp}}$] is not empty:
... latexmath:[$i'$] has a fully determined memory footprint;
... latexmath:[$i'$] has no unpropagated memory store operations that
overlap with latexmath:[$\overline{\textit{cfp}}$]; and
... if latexmath:[$i'$] is a load with a memory footprint that overlaps
with latexmath:[$\overline{\textit{cfp}}$], then all the memory load
operations of latexmath:[$i'$] that overlap with
latexmath:[$\overline{\textit{cfp}}$] are satisfied and latexmath:[$i'$]
is _non-restartable_ (see the transition for how to determined if an
instruction is non-restartable).
+
Here, a memory store operation is called fixed if the store instruction
has fully determined data.
. latexmath:[$i$] has a fully determined data; and
. if latexmath:[$i$] is not a fence, all program-order-previous
conditional branch and indirect jump instructions are finished.

Action:

. if latexmath:[$i$] is a conditional branch or indirect jump
instruction, discard any untaken paths of execution, i.e., remove all
instruction instances that are not reachable by the branch/jump taken in
_instruction_tree_; and
. record the instruction as finished, i.e., set _finished_ to _true_.

[[sec:omm:limitations]]
==== Limitations

* The model covers user-level RV64I and RV64A. In particular, it does
not support the misaligned atomics extension ``Zam`` or the total store
ordering extension ``Ztso``. It should be trivial to adapt the model to
RV32I/A and to the G, Q and C extensions, but we have never tried it.
This will involve, mostly, writing Sail code for the instructions, with
minimal, if any, changes to the concurrency model.
* The model covers only normal memory accesses (it does not handle I/O
accesses).
* The model does not cover TLB-related effects.
* The model assumes the instruction memory is fixed. In particular, the
transition does not generate memory load operations, and the shared
memory is not involved in the transition. Instead, the model depends on
an external oracle that provides an opcode when given a memory location.
* The model does not cover exceptions, traps and interrupts.
