From 9094500ba60b677a9c93e970ec741d2fc8f0c89a Mon Sep 17 00:00:00 2001 From: ntfreak Date: Wed, 14 Jan 2009 21:26:47 +0000 Subject: - add missing svn props and fix incorrect line endings from last commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1321 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- testing/examples/ledtest-imx31pdk/Makefile | 84 +++---- testing/examples/ledtest-imx31pdk/crt0.S | 94 ++++---- testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk | 257 ++++++++++----------- testing/examples/ledtest-imx31pdk/ldscript | 36 +-- 4 files changed, 234 insertions(+), 237 deletions(-) (limited to 'testing/examples') diff --git a/testing/examples/ledtest-imx31pdk/Makefile b/testing/examples/ledtest-imx31pdk/Makefile index fc643ad..74e2fc2 100644 --- a/testing/examples/ledtest-imx31pdk/Makefile +++ b/testing/examples/ledtest-imx31pdk/Makefile @@ -1,42 +1,42 @@ -# $Header: $ -# This will make the test program for ARM. - -PROC=arm -TYPE=none-linux-gnueabi -LDSCRIPT=ldscript - -PATH:=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/:$(PATH) -CC=$(PROC)-$(TYPE)-gcc -AS=$(PROC)-$(TYPE)-as -AR=$(PROC)-$(TYPE)-ar -LD=$(PROC)-$(TYPE)-ld -NM=$(PROC)-$(TYPE)-nm -OBJDUMP=$(PROC)-$(TYPE)-objdump -CFLAGS= -g -c -mcpu=arm1136j-s - -all: test.elf - -# Make a little endian image: -# In Eclipse, add the line : -# source gdbinit -# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox) -# To start gdb from a window use : arm-elf-gdb --command=gdbinit -test.elf: test.c Makefile ldscript crt0.S - $(CC) $(CFLAGS) -o crt0.o crt0.S - $(CC) $(CFLAGS) -o test.o test.c - $(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o - $(NM) test.elf - - -dump: - $(OBJDUMP) --all-headers test.elf - -dump_test: - $(OBJDUMP) --disassemble test.elf - -dump_full: - $(OBJDUMP) --full-contents test.elf - -clean: - -/bin/rm -f *.o *~ test.elf - +# $Header: $ +# This will make the test program for ARM. + +PROC=arm +TYPE=none-linux-gnueabi +LDSCRIPT=ldscript + +PATH:=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/:$(PATH) +CC=$(PROC)-$(TYPE)-gcc +AS=$(PROC)-$(TYPE)-as +AR=$(PROC)-$(TYPE)-ar +LD=$(PROC)-$(TYPE)-ld +NM=$(PROC)-$(TYPE)-nm +OBJDUMP=$(PROC)-$(TYPE)-objdump +CFLAGS= -g -c -mcpu=arm1136j-s + +all: test.elf + +# Make a little endian image: +# In Eclipse, add the line : +# source gdbinit +# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox) +# To start gdb from a window use : arm-elf-gdb --command=gdbinit +test.elf: test.c Makefile ldscript crt0.S + $(CC) $(CFLAGS) -o crt0.o crt0.S + $(CC) $(CFLAGS) -o test.o test.c + $(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o + $(NM) test.elf + + +dump: + $(OBJDUMP) --all-headers test.elf + +dump_test: + $(OBJDUMP) --disassemble test.elf + +dump_full: + $(OBJDUMP) --full-contents test.elf + +clean: + -/bin/rm -f *.o *~ test.elf + diff --git a/testing/examples/ledtest-imx31pdk/crt0.S b/testing/examples/ledtest-imx31pdk/crt0.S index 6c15be2..d749881 100644 --- a/testing/examples/ledtest-imx31pdk/crt0.S +++ b/testing/examples/ledtest-imx31pdk/crt0.S @@ -1,47 +1,47 @@ -/* Sample initialization file */ - - .extern main - .extern exit - -/* .text is used instead of .section .text so it works with arm-aout too. */ - .text - .code 32 - .align 0 - - .global _mainCRTStartup - .global _start - .global start -start: -_start: -_mainCRTStartup: - -/* Start by setting up a stack */ - /* Set up the stack pointer to end of bss */ - ldr r3, .LC2 - mov sp, r3 - - sub sl, sp, #512 /* Still assumes 512 bytes below sl */ - - mov a2, #0 /* Second arg: fill value */ - mov fp, a2 /* Null frame pointer */ - mov r7, a2 /* Null frame pointer for Thumb */ - - ldr a1, .LC1 /* First arg: start of memory block */ - ldr a3, .LC2 /* Second arg: end of memory block */ - sub a3, a3, a1 /* Third arg: length of block */ - - mov r0, #0 /* no arguments */ - mov r1, #0 /* no argv either */ - - bl main - bl exit /* Should not return */ - - /* For Thumb, constants must be after the code since only - positive offsets are supported for PC relative addresses. */ - - .align 0 -.LC1: - .word __bss_start__ -.LC2: - .word __bss_end__ - +/* Sample initialization file */ + + .extern main + .extern exit + +/* .text is used instead of .section .text so it works with arm-aout too. */ + .text + .code 32 + .align 0 + + .global _mainCRTStartup + .global _start + .global start +start: +_start: +_mainCRTStartup: + +/* Start by setting up a stack */ + /* Set up the stack pointer to end of bss */ + ldr r3, .LC2 + mov sp, r3 + + sub sl, sp, #512 /* Still assumes 512 bytes below sl */ + + mov a2, #0 /* Second arg: fill value */ + mov fp, a2 /* Null frame pointer */ + mov r7, a2 /* Null frame pointer for Thumb */ + + ldr a1, .LC1 /* First arg: start of memory block */ + ldr a3, .LC2 /* Second arg: end of memory block */ + sub a3, a3, a1 /* Third arg: length of block */ + + mov r0, #0 /* no arguments */ + mov r1, #0 /* no argv either */ + + bl main + bl exit /* Should not return */ + + /* For Thumb, constants must be after the code since only + positive offsets are supported for PC relative addresses. */ + + .align 0 +.LC1: + .word __bss_start__ +.LC2: + .word __bss_end__ + diff --git a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk index b1148c6..5b78daa 100644 --- a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk +++ b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk @@ -1,131 +1,128 @@ -echo Setting up for the FreeScale iMX31 Board.\n -# SETUP GDB : -# -# Common gdb setup for ARM CPUs -set complaints 1 -set output-radix 10 -set input-radix 10 -set prompt (arm-gdb) -set endian little -dir . - - -# DEFINE MACROS : -# -# Create a "refresh" macro to update gdb's screens after the cpu -# has been stopped by the other CPU or following an "monitor allstop" -define refresh - monitor set hbreak - cont - monitor clear hbreak -end - - -# CONNECT TO TARGET : -target remote 127.0.0.1:3333 -monitor reset run -#FIX!!!! should be reset init! -monitor reset halt - -# iMX31 PDK board initialization commands: - -#// init_ccm - -monitor mww 0x53FC0000 0x040 -monitor mww 0x53F80000 0x074B0B7D - -#//532-133-66.5 -#//monitor mww 0x53F80004 0xFF871D58 -#//monitor mww 0x53F80010 0x0033280C - -#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40 -monitor mww 0x53F80004 0xFF871D50 -monitor mww 0x53F80010 0x00271C1B - -#// 208-104-52 -#//monitor mww 0x53F80004 0xFF871D48 -#//monitor mww 0x53F80010 0x04002000 - - -#// Configure CPLD on CS5 -monitor mww 0xb8002050 0x0000DCF6 -monitor mww 0xb8002054 0x444A4541 -monitor mww 0xb8002058 0x44443302 - -#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits -#// in SW_PAD_CTL registers - -#// SDCLK -monitor mww 0x43FAC26C 0 - -#// CAS -monitor mww 0x43FAC270 0 - -#// RAS -monitor mww 0x43FAC274 0 - -#// CS2 (CSD0) -monitor mww 0x43FAC27C 0x1000 - -#// DQM3 -monitor mww 0x43FAC284 0 - -#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) -monitor mww 0x43FAC288 0 -monitor mww 0x43FAC28C 0 -monitor mww 0x43FAC290 0 -monitor mww 0x43FAC294 0 -monitor mww 0x43FAC298 0 -monitor mww 0x43FAC29C 0 -monitor mww 0x43FAC2A0 0 -monitor mww 0x43FAC2A4 0 -monitor mww 0x43FAC2A8 0 -monitor mww 0x43FAC2AC 0 -monitor mww 0x43FAC2B0 0 -monitor mww 0x43FAC2B4 0 -monitor mww 0x43FAC2B8 0 -monitor mww 0x43FAC2BC 0 -monitor mww 0x43FAC2C0 0 -monitor mww 0x43FAC2C4 0 -monitor mww 0x43FAC2C8 0 -monitor mww 0x43FAC2CC 0 -monitor mww 0x43FAC2D0 0 -monitor mww 0x43FAC2D4 0 -monitor mww 0x43FAC2D8 0 -monitor mww 0x43FAC2DC 0 - -#// Initialization script for 32 bit DDR on MX31 PDK -monitor mww 0xB8001010 0x00000004 -monitor mww 0xB8001004 0x006ac73a -monitor mww 0xB8001000 0x92100000 -monitor mww 0x80000f00 0x12344321 -monitor mww 0xB8001000 0xa2100000 -monitor mww 0x80000000 0x12344321 -monitor mww 0x80000000 0x12344321 -monitor mww 0xB8001000 0xb2100000 -#monitor char 0x80000033 0xda -monitor mwb 0x80000033 0xda -#monitor char 0x81000000 0xff -monitor mwb 0x81000000 0xff -monitor mww 0xB8001000 0x82226080 -monitor mww 0x80000000 0xDEADBEEF -monitor mww 0xB8001010 0x0000000c - -# LOAD IMAGE : -# - -# Load the program executable called "u-boot" -load test.elf - -# Load the symbols for the program. -symbol-file test.elf - -# RUN TO MAIN : -# -# Set a breakpoint at main(). -#b reset -b main - -# Run to the breakpoint. -c +echo Setting up for the FreeScale iMX31 Board.\n +# SETUP GDB : +# +# Common gdb setup for ARM CPUs +set complaints 1 +set output-radix 10 +set input-radix 10 +set prompt (arm-gdb) +set endian little +dir . + +# DEFINE MACROS : +# +# Create a "refresh" macro to update gdb's screens after the cpu +# has been stopped by the other CPU or following an "monitor allstop" +define refresh + monitor set hbreak + cont + monitor clear hbreak +end + +# CONNECT TO TARGET : +target remote 127.0.0.1:3333 +monitor reset run +#FIX!!!! should be reset init! +monitor reset halt + +# iMX31 PDK board initialization commands: + +#// init_ccm + +monitor mww 0x53FC0000 0x040 +monitor mww 0x53F80000 0x074B0B7D + +#//532-133-66.5 +#//monitor mww 0x53F80004 0xFF871D58 +#//monitor mww 0x53F80010 0x0033280C + +#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40 +monitor mww 0x53F80004 0xFF871D50 +monitor mww 0x53F80010 0x00271C1B + +#// 208-104-52 +#//monitor mww 0x53F80004 0xFF871D48 +#//monitor mww 0x53F80010 0x04002000 + +#// Configure CPLD on CS5 +monitor mww 0xb8002050 0x0000DCF6 +monitor mww 0xb8002054 0x444A4541 +monitor mww 0xb8002058 0x44443302 + +#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits +#// in SW_PAD_CTL registers + +#// SDCLK +monitor mww 0x43FAC26C 0 + +#// CAS +monitor mww 0x43FAC270 0 + +#// RAS +monitor mww 0x43FAC274 0 + +#// CS2 (CSD0) +monitor mww 0x43FAC27C 0x1000 + +#// DQM3 +monitor mww 0x43FAC284 0 + +#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) +monitor mww 0x43FAC288 0 +monitor mww 0x43FAC28C 0 +monitor mww 0x43FAC290 0 +monitor mww 0x43FAC294 0 +monitor mww 0x43FAC298 0 +monitor mww 0x43FAC29C 0 +monitor mww 0x43FAC2A0 0 +monitor mww 0x43FAC2A4 0 +monitor mww 0x43FAC2A8 0 +monitor mww 0x43FAC2AC 0 +monitor mww 0x43FAC2B0 0 +monitor mww 0x43FAC2B4 0 +monitor mww 0x43FAC2B8 0 +monitor mww 0x43FAC2BC 0 +monitor mww 0x43FAC2C0 0 +monitor mww 0x43FAC2C4 0 +monitor mww 0x43FAC2C8 0 +monitor mww 0x43FAC2CC 0 +monitor mww 0x43FAC2D0 0 +monitor mww 0x43FAC2D4 0 +monitor mww 0x43FAC2D8 0 +monitor mww 0x43FAC2DC 0 + +#// Initialization script for 32 bit DDR on MX31 PDK +monitor mww 0xB8001010 0x00000004 +monitor mww 0xB8001004 0x006ac73a +monitor mww 0xB8001000 0x92100000 +monitor mww 0x80000f00 0x12344321 +monitor mww 0xB8001000 0xa2100000 +monitor mww 0x80000000 0x12344321 +monitor mww 0x80000000 0x12344321 +monitor mww 0xB8001000 0xb2100000 +#monitor char 0x80000033 0xda +monitor mwb 0x80000033 0xda +#monitor char 0x81000000 0xff +monitor mwb 0x81000000 0xff +monitor mww 0xB8001000 0x82226080 +monitor mww 0x80000000 0xDEADBEEF +monitor mww 0xB8001010 0x0000000c + +# LOAD IMAGE : +# + +# Load the program executable called "u-boot" +load test.elf + +# Load the symbols for the program. +symbol-file test.elf + +# RUN TO MAIN : +# +# Set a breakpoint at main(). +#b reset +b main + +# Run to the breakpoint. +c diff --git a/testing/examples/ledtest-imx31pdk/ldscript b/testing/examples/ledtest-imx31pdk/ldscript index 1baea1e..d6f60d6 100644 --- a/testing/examples/ledtest-imx31pdk/ldscript +++ b/testing/examples/ledtest-imx31pdk/ldscript @@ -1,18 +1,18 @@ -SECTIONS -{ - . = 0x80000100; - .text : { *(.text) } - .data ALIGN(0x10): { *(.data) } - .bss ALIGN(0x10): { - __bss_start__ = ABSOLUTE(.); - *(.bss) - . += 0x100; - } - __bss_end__ = .; -PROVIDE (__stack = .); - _end = .; - .debug_info 0 : { *(.debug_info) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } -} +SECTIONS +{ + . = 0x80000100; + .text : { *(.text) } + .data ALIGN(0x10): { *(.data) } + .bss ALIGN(0x10): { + __bss_start__ = ABSOLUTE(.); + *(.bss) + . += 0x100; + } + __bss_end__ = .; +PROVIDE (__stack = .); + _end = .; + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } +} -- cgit v1.1