From dbbc9c41f7db210b0a4e226540a28e0a8a5019bf Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:49:24 +0000 Subject: Move TCL script files -- Step 2 of 2: - Move src/tcl to tcl/. - Update top Makefile.am to use new path name. git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- tcl/target/readme.txt | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 tcl/target/readme.txt (limited to 'tcl/target/readme.txt') diff --git a/tcl/target/readme.txt b/tcl/target/readme.txt new file mode 100644 index 0000000..ca23c64 --- /dev/null +++ b/tcl/target/readme.txt @@ -0,0 +1,41 @@ +Prerequisites: +The users of OpenOCD as well as computer programs interacting with OpenOCD are expecting that certain commands +do the same thing across all the targets. + +Rules to follow when writing scripts: + +1. The configuration script should be defined such as , for example, the following sequences are working: + reset + flash info +and + reset + flash erase_address +and + reset init + load + +In most cases this can be accomplished by specifying the default startup mode as reset_init (target command +in the configuration file). + +2. If the target is correctly configured, flash must be writable without any other helper commands. It is +assumed that all write-protect mechanisms should be disabled. + +3. The configuration scripts should be defined such as the binary that was written to flash verifies +(turn off remapping, checksums, etc...) + +flash write_image [file] +verify_image [file] + +4. jtag_khz sets the maximum speed (or alternatively RCLK). If invoked +multiple times only the last setting is used. + +interface/xxx.cfg files are always executed *before* target/xxx.cfg +files, so any jtag_khz in interface/xxx.cfg will be overridden by +target/xxx.cfg. jtag_khz in interface/xxx.cfg would then, effectively, +set the default JTAG speed. + +Note that a target/xxx.cfg file can invoke another target/yyy.cfg file, +so one can create target subtype configurations where e.g. only +amount of DRAM, oscillator speeds differ and having a single +config file for the default/common settings. + -- cgit v1.1