From b19c48c6c84c78168adf272841d1a3c4a989e25e Mon Sep 17 00:00:00 2001
From: oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Tue, 19 May 2009 11:53:05 +0000
Subject: Wookey <wookey@wookware.org> update syntax

git-svn-id: svn://svn.berlios.de/openocd/trunk@1836 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 src/target/target/pxa270.cfg | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

(limited to 'src')

diff --git a/src/target/target/pxa270.cfg b/src/target/target/pxa270.cfg
index 68e7ffc..34bb60d 100644
--- a/src/target/target/pxa270.cfg
+++ b/src/target/target/pxa270.cfg
@@ -12,6 +12,9 @@ if { [info exists ENDIAN] } {
    set  _ENDIAN little
 }
 
+#IDs for pxa270. Choose one. Are there others?#
+#set CPUTAPID 0x79265013
+#set CPUTAPID 0x49265013
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
@@ -26,10 +29,6 @@ jtag_nsrst_delay 260
 # set the jtag_ntrst_delay to the delay introduced by a reset circuit
 # the rest of the needed delays are built into the openocd program
 jtag_ntrst_delay 0
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst separate
-#jtag scan chain
-
 
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
@@ -38,7 +37,3 @@ target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-# works for P30 flash
-flash bank cfi 0x00000000 0x1000000 2 4 0
-- 
cgit v1.1