From 8dcb91fb83e59d475af9da377066021ae2e03969 Mon Sep 17 00:00:00 2001 From: Tomas Vanek Date: Fri, 10 Mar 2017 21:43:46 +0100 Subject: flash Kinetis: add KL28 device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This device differs a lot from others in KL series. Unfortunately the System Integration Module, where device identification resides, moved to a new address so probe now have to try both addresses of SIM_SDID. Introduce a new bank creation option: -sim-base to ensure error free probe. WDOG32 is slightly different from KE1x and on different address. System Mode Controler changed layout to word aligned. Change-Id: I2c9dca0c4ad4228fcc941d6078d15f5e394833ff Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/4059 Tested-by: jenkins Reviewed-by: Joakim Nohlgård Reviewed-by: Freddie Chopin --- doc/openocd.texi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'doc') diff --git a/doc/openocd.texi b/doc/openocd.texi index 5fd4300..d26c55a 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5368,6 +5368,11 @@ recognizes flash size and a number of flash banks (1-4) using the chip identification register, and autoconfigures itself. Use kinetis_ke driver for KE0x devices. +The @var{kinetis} driver defines option: +@itemize +@item -sim-base @var{addr} ... base of System Integration Module where chip identification resides. Driver tries two known locations if option is omitted. +@end itemize + @example flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME @end example -- cgit v1.1