diff options
author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2008-11-05 09:06:34 +0000 |
---|---|---|
committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2008-11-05 09:06:34 +0000 |
commit | 3dd0884989fd36d13cd1907c3ca8ccd38eed763f (patch) | |
tree | e7cb1b05df9f2131ad70fd2beb59fc6c8bd731fb | |
parent | 71c73068858ad80020c7956a215a5ec590704ddb (diff) | |
download | riscv-openocd-3dd0884989fd36d13cd1907c3ca8ccd38eed763f.zip riscv-openocd-3dd0884989fd36d13cd1907c3ca8ccd38eed763f.tar.gz riscv-openocd-3dd0884989fd36d13cd1907c3ca8ccd38eed763f.tar.bz2 |
wip
git-svn-id: svn://svn.berlios.de/openocd/trunk@1136 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-rw-r--r-- | src/target/target/imote2.cfg | 24 | ||||
-rw-r--r-- | src/target/target/is5114.cfg | 20 | ||||
-rw-r--r-- | src/target/target/str910-eval.cfg | 19 |
3 files changed, 63 insertions, 0 deletions
diff --git a/src/target/target/imote2.cfg b/src/target/target/imote2.cfg new file mode 100644 index 0000000..a02a8d3 --- /dev/null +++ b/src/target/target/imote2.cfg @@ -0,0 +1,24 @@ +# iMote2 +# +# PXA271 and an Intel Strataflash of 32 Megabytes (p30) +# +# Marvell/Intel PXA270 Script +# set jtag_nsrst_delay to the delay introduced by your reset circuit +# the rest of the needed delays are built into the openocd program +jtag_nsrst_delay 800 +# set the jtag_ntrst_delay to the delay introduced by a reset circuit +# the rest of the needed delays are built into the openocd program +jtag_ntrst_delay 0 +#use combined on interfaces or targets that can’t set TRST/SRST separately +reset_config trst_and_srst separate +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag_device 7 0x1 0x7f 0x7e +target xscale little 0 pxa27x +# maps to PXA internal RAM. If you are using a PXA255 +# you must initialize SDRAM or leave this option off +working_area 0 0x5c000000 0x10000 nobackup + +#flash bank <driver> <base> <size> <chip_width> <bus_width> +# works for P30 flash +flash bank cfi 0x00000000 0x2000000 2 2 0 diff --git a/src/target/target/is5114.cfg b/src/target/target/is5114.cfg new file mode 100644 index 0000000..a370ff3 --- /dev/null +++ b/src/target/target/is5114.cfg @@ -0,0 +1,20 @@ +# script for Insilica IS-5114
+
+# jtag speed. We need to stick to 16kHz until we've finished reset.
+jtag_rclk 16
+
+reset_config trst_and_srst
+
+jtag_device 8 0x1 0x1 0xfe
+jtag_device 4 0x1 0xf 0xe
+jtag_device 5 0x1 0x1 0x1e
+
+#arm946e-s and
+target arm966e little 1 arm966e
+
+[new_target_name] configure -event reset-start { jtag_rclk 16 }
+[new_target_name] configure -event reset-init {
+ # We can increase speed now that we know the target is halted.
+ jtag_rclk 3000
+}
+working_area 0 0x50000000 16384 nobackup
diff --git a/src/target/target/str910-eval.cfg b/src/target/target/str910-eval.cfg new file mode 100644 index 0000000..b77e0ea --- /dev/null +++ b/src/target/target/str910-eval.cfg @@ -0,0 +1,19 @@ +# str910-eval eval board
+#
+# Need reset scripts
+reset_config trst_and_srst
+
+jtag_device 8 0x1 0x1 0xfe
+jtag_device 4 0x1 0xf 0xe
+jtag_device 5 0x1 0x1 0x1e
+
+target arm966e little reset_halt 1 arm966e
+
+working_area 0 0x50000000 16384 nobackup
+
+flash bank str9xpec 0x00000000 0x00080000 0 0 0
+
+str9xpec enable_turbo 0
+str9xpec options_read 0
+str9xpec options_cmap 0 bank 1
+str9xpec options_write 0
|