From 3227c85fe76312290c3ec15a02dcba3f9c6bc399 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Fri, 8 Oct 2021 00:17:21 -0500 Subject: i2c: Add a DM_I2C driver for the sun8i RSB controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the rsb functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants, so move that to the common header. There are only a couple of pairs of hardware/runtime addresses used across all PMIC variants. So far the code expected only the "primary" pair, but some PMICs like the AXP305 and AXP805 use the secondary pair, so add support for that to the DM driver as well. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara --- arch/arm/mach-sunxi/Kconfig | 18 +-- arch/arm/mach-sunxi/Makefile | 1 - arch/arm/mach-sunxi/pmic_bus.c | 11 +- arch/arm/mach-sunxi/rsb.c | 175 ---------------------- configs/Cubieboard4_defconfig | 2 +- configs/Merrii_A80_Optimus_defconfig | 2 +- drivers/i2c/Kconfig | 8 + drivers/i2c/Makefile | 1 + drivers/i2c/sun8i_rsb.c | 281 +++++++++++++++++++++++++++++++++++ include/axp_pmic.h | 6 + 10 files changed, 309 insertions(+), 196 deletions(-) delete mode 100644 arch/arm/mach-sunxi/rsb.c create mode 100644 drivers/i2c/sun8i_rsb.c diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index f4a4528..10401d3 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -100,14 +100,6 @@ config AXP_PMIC_BUS Select this PMIC bus access helpers for Sunxi platform PRCM or other AXP family PMIC devices. -config SUN8I_RSB - bool "Allwinner sunXi Reduced Serial Bus Driver" - help - Say y here to enable support for Allwinner's Reduced Serial Bus - (RSB) support. This controller is responsible for communicating - with various RSB based devices, such as AXP223, AXP8XX PMICs, - and AC100/AC200 ICs. - config SUNXI_SRAM_ADDRESS hex default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5 @@ -250,9 +242,10 @@ config MACH_SUN8I_A23 select ARCH_SUPPORT_PSCI select DRAM_SUN8I_A23 select PHY_SUN4I_USB - select SUN8I_RSB + select SPL_I2C select SUNXI_GEN_SUN6I select SUPPORT_SPL + select SYS_I2C_SUN8I_RSB select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT imply CONS_INDEX_5 if !DM_SERIAL @@ -264,9 +257,10 @@ config MACH_SUN8I_A33 select ARCH_SUPPORT_PSCI select DRAM_SUN8I_A33 select PHY_SUN4I_USB - select SUN8I_RSB + select SPL_I2C select SUNXI_GEN_SUN6I select SUPPORT_SPL + select SYS_I2C_SUN8I_RSB select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT imply CONS_INDEX_5 if !DM_SERIAL @@ -275,11 +269,12 @@ config MACH_SUN8I_A83T select CPU_V7A select DRAM_SUN8I_A83T select PHY_SUN4I_USB - select SUN8I_RSB + select SPL_I2C select SUNXI_GEN_SUN6I select MMC_SUNXI_HAS_NEW_MODE select MMC_SUNXI_HAS_MODE_SWITCH select SUPPORT_SPL + select SYS_I2C_SUN8I_RSB config MACH_SUN8I_H3 bool "sun8i (Allwinner H3)" @@ -320,6 +315,7 @@ config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7A select DRAM_SUN9I + select SPL_I2C select SUN6I_PRCM select SUNXI_GEN_SUN6I select SUPPORT_SPL diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index c9312bb..5d3fd70 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -13,7 +13,6 @@ obj-y += dram_helpers.o obj-y += pinmux.o obj-$(CONFIG_SUN6I_PRCM) += prcm.o obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o -obj-$(CONFIG_SUN8I_RSB) += rsb.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c index 673a05f..8277972 100644 --- a/arch/arm/mach-sunxi/pmic_bus.c +++ b/arch/arm/mach-sunxi/pmic_bus.c @@ -23,10 +23,6 @@ #define AXP221_CHIP_ADDR 0x68 -/* AXP818 device and runtime addresses are same as AXP223 */ -#define AXP223_DEVICE_ADDR 0x3a3 -#define AXP223_RUNTIME_ADDR 0x2d - int pmic_bus_init(void) { /* This cannot be 0 because it is used in SPL before BSS is ready */ @@ -49,7 +45,8 @@ int pmic_bus_init(void) if (ret) return ret; - ret = rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR); + ret = rsb_set_device_address(AXP_PMIC_PRI_DEVICE_ADDR, + AXP_PMIC_PRI_RUNTIME_ADDR); # endif if (ret) return ret; @@ -73,7 +70,7 @@ int pmic_bus_read(u8 reg, u8 *data) # elif defined CONFIG_MACH_SUN8I_R40 return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1); # else - return rsb_read(AXP223_RUNTIME_ADDR, reg, data); + return rsb_read(AXP_PMIC_PRI_RUNTIME_ADDR, reg, data); # endif #endif } @@ -92,7 +89,7 @@ int pmic_bus_write(u8 reg, u8 data) # elif defined CONFIG_MACH_SUN8I_R40 return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1); # else - return rsb_write(AXP223_RUNTIME_ADDR, reg, data); + return rsb_write(AXP_PMIC_PRI_RUNTIME_ADDR, reg, data); # endif #endif } diff --git a/arch/arm/mach-sunxi/rsb.c b/arch/arm/mach-sunxi/rsb.c deleted file mode 100644 index 01bb09b..0000000 --- a/arch/arm/mach-sunxi/rsb.c +++ /dev/null @@ -1,175 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2014 Hans de Goede - * - * Based on allwinner u-boot sources rsb code which is: - * (C) Copyright 2007-2013 - * Allwinner Technology Co., Ltd. - * lixiang - */ - -#include -#include -#include -#include -#include -#include -#include - -static int rsb_set_device_mode(void); - -static void rsb_cfg_io(void) -{ -#ifdef CONFIG_MACH_SUN8I - sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL_R_RSB); - sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL_R_RSB); - sunxi_gpio_set_pull(SUNXI_GPL(0), 1); - sunxi_gpio_set_pull(SUNXI_GPL(1), 1); - sunxi_gpio_set_drv(SUNXI_GPL(0), 2); - sunxi_gpio_set_drv(SUNXI_GPL(1), 2); -#elif defined CONFIG_MACH_SUN9I - sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN_R_RSB); - sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN_R_RSB); - sunxi_gpio_set_pull(SUNXI_GPN(0), 1); - sunxi_gpio_set_pull(SUNXI_GPN(1), 1); - sunxi_gpio_set_drv(SUNXI_GPN(0), 2); - sunxi_gpio_set_drv(SUNXI_GPN(1), 2); -#else -#error unsupported MACH_SUNXI -#endif -} - -static void rsb_set_clk(void) -{ - struct sunxi_rsb_reg * const rsb = - (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - u32 div = 0; - u32 cd_odly = 0; - - /* Source is Hosc24M, set RSB clk to 3Mhz */ - div = 24000000 / 3000000 / 2 - 1; - cd_odly = div >> 1; - if (!cd_odly) - cd_odly = 1; - - writel((cd_odly << 8) | div, &rsb->ccr); -} - -int rsb_init(void) -{ - struct sunxi_rsb_reg * const rsb = - (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - - /* Enable RSB and PIO clk, and de-assert their resets */ - prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB); - - /* Setup external pins */ - rsb_cfg_io(); - - writel(RSB_CTRL_SOFT_RST, &rsb->ctrl); - rsb_set_clk(); - - return rsb_set_device_mode(); -} - -static int rsb_await_trans(void) -{ - struct sunxi_rsb_reg * const rsb = - (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - unsigned long tmo = timer_get_us() + 1000000; - u32 stat; - int ret; - - while (1) { - stat = readl(&rsb->stat); - if (stat & RSB_STAT_LBSY_INT) { - ret = -EBUSY; - break; - } - if (stat & RSB_STAT_TERR_INT) { - ret = -EIO; - break; - } - if (stat & RSB_STAT_TOVER_INT) { - ret = 0; - break; - } - if (timer_get_us() > tmo) { - ret = -ETIME; - break; - } - } - writel(stat, &rsb->stat); /* Clear status bits */ - - return ret; -} - -static int rsb_set_device_mode(void) -{ - struct sunxi_rsb_reg * const rsb = - (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - unsigned long tmo = timer_get_us() + 1000000; - - writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA, - &rsb->dmcr); - - while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) { - if (timer_get_us() > tmo) - return -ETIME; - } - - return rsb_await_trans(); -} - -static int rsb_do_trans(void) -{ - struct sunxi_rsb_reg * const rsb = - (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - - setbits_le32(&rsb->ctrl, RSB_CTRL_START_TRANS); - return rsb_await_trans(); -} - -int rsb_set_device_address(u16 device_addr, u16 runtime_addr) -{ - struct sunxi_rsb_reg * const rsb = - (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - - writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr) | - RSB_DEVADDR_DEVICE_ADDR(device_addr), &rsb->devaddr); - writel(RSB_CMD_SET_RTSADDR, &rsb->cmd); - - return rsb_do_trans(); -} - -int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data) -{ - struct sunxi_rsb_reg * const rsb = - (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - - writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr); - writel(reg_addr, &rsb->addr); - writel(data, &rsb->data); - writel(RSB_CMD_BYTE_WRITE, &rsb->cmd); - - return rsb_do_trans(); -} - -int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data) -{ - struct sunxi_rsb_reg * const rsb = - (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - int ret; - - writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr); - writel(reg_addr, &rsb->addr); - writel(RSB_CMD_BYTE_READ, &rsb->cmd); - - ret = rsb_do_trans(); - if (ret) - return ret; - - *data = readl(&rsb->data) & 0xff; - - return 0; -} diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig index 0377bb8..3848cab 100644 --- a/configs/Cubieboard4_defconfig +++ b/configs/Cubieboard4_defconfig @@ -11,6 +11,6 @@ CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH16" CONFIG_USB1_VBUS_PIN="PH14" CONFIG_USB3_VBUS_PIN="PH15" -CONFIG_SUN8I_RSB=y +CONFIG_SYS_I2C_SUN8I_RSB=y CONFIG_AXP_GPIO=y CONFIG_AXP809_POWER=y diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index 8fb6504..35e5753 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -11,6 +11,6 @@ CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH3" CONFIG_USB1_VBUS_PIN="PH4" CONFIG_USB3_VBUS_PIN="PH5" -CONFIG_SUN8I_RSB=y +CONFIG_SYS_I2C_SUN8I_RSB=y CONFIG_AXP_GPIO=y CONFIG_AXP809_POWER=y diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 0adf143..66bd6fe 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -583,6 +583,14 @@ config SYS_I2C_SUN6I_P2WI in the Allwinner A31 and A31s SOCs. This interface is used to connect to specific devices like the X-Powers AXP221 PMIC. +config SYS_I2C_SUN8I_RSB + bool "Allwinner sun8i Reduced Serial Bus controller" + depends on ARCH_SUNXI + help + Support for Allwinner's Reduced Serial Bus (RSB) controller. This + controller is responsible for communicating with various RSB based + devices, such as X-Powers AXPxxx PMICs and AC100/AC200 CODEC ICs. + config SYS_I2C_SYNQUACER bool "Socionext SynQuacer I2C controller" depends on ARCH_SYNQUACER && DM_I2C diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 0a2cc64..9164274 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o obj-$(CONFIG_SYS_I2C_STM32F7) += stm32f7_i2c.o obj-$(CONFIG_SYS_I2C_SUN6I_P2WI) += sun6i_p2wi.o +obj-$(CONFIG_SYS_I2C_SUN8I_RSB) += sun8i_rsb.o obj-$(CONFIG_SYS_I2C_SYNQUACER) += synquacer_i2c.o obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o obj-$(CONFIG_SYS_I2C_UNIPHIER) += i2c-uniphier.o diff --git a/drivers/i2c/sun8i_rsb.c b/drivers/i2c/sun8i_rsb.c new file mode 100644 index 0000000..716b245 --- /dev/null +++ b/drivers/i2c/sun8i_rsb.c @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2014 Hans de Goede + * + * Based on allwinner u-boot sources rsb code which is: + * (C) Copyright 2007-2013 + * Allwinner Technology Co., Ltd. + * lixiang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int sun8i_rsb_await_trans(struct sunxi_rsb_reg *base) +{ + unsigned long tmo = timer_get_us() + 1000000; + u32 stat; + int ret; + + while (1) { + stat = readl(&base->stat); + if (stat & RSB_STAT_LBSY_INT) { + ret = -EBUSY; + break; + } + if (stat & RSB_STAT_TERR_INT) { + ret = -EIO; + break; + } + if (stat & RSB_STAT_TOVER_INT) { + ret = 0; + break; + } + if (timer_get_us() > tmo) { + ret = -ETIME; + break; + } + } + writel(stat, &base->stat); /* Clear status bits */ + + return ret; +} + +static int sun8i_rsb_do_trans(struct sunxi_rsb_reg *base) +{ + setbits_le32(&base->ctrl, RSB_CTRL_START_TRANS); + + return sun8i_rsb_await_trans(base); +} + +static int sun8i_rsb_read(struct sunxi_rsb_reg *base, u16 runtime_addr, + u8 reg_addr, u8 *data) +{ + int ret; + + writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr), &base->devaddr); + writel(reg_addr, &base->addr); + writel(RSB_CMD_BYTE_READ, &base->cmd); + + ret = sun8i_rsb_do_trans(base); + if (ret) + return ret; + + *data = readl(&base->data) & 0xff; + + return 0; +} + +static int sun8i_rsb_write(struct sunxi_rsb_reg *base, u16 runtime_addr, + u8 reg_addr, u8 data) +{ + writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr), &base->devaddr); + writel(reg_addr, &base->addr); + writel(data, &base->data); + writel(RSB_CMD_BYTE_WRITE, &base->cmd); + + return sun8i_rsb_do_trans(base); +} + +static int sun8i_rsb_set_device_address(struct sunxi_rsb_reg *base, + u16 device_addr, u16 runtime_addr) +{ + writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr) | + RSB_DEVADDR_DEVICE_ADDR(device_addr), &base->devaddr); + writel(RSB_CMD_SET_RTSADDR, &base->cmd); + + return sun8i_rsb_do_trans(base); +} + +static void sun8i_rsb_cfg_io(void) +{ +#ifdef CONFIG_MACH_SUN8I + sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL_R_RSB); + sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL_R_RSB); + sunxi_gpio_set_pull(SUNXI_GPL(0), 1); + sunxi_gpio_set_pull(SUNXI_GPL(1), 1); + sunxi_gpio_set_drv(SUNXI_GPL(0), 2); + sunxi_gpio_set_drv(SUNXI_GPL(1), 2); +#elif defined CONFIG_MACH_SUN9I + sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN_R_RSB); + sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN_R_RSB); + sunxi_gpio_set_pull(SUNXI_GPN(0), 1); + sunxi_gpio_set_pull(SUNXI_GPN(1), 1); + sunxi_gpio_set_drv(SUNXI_GPN(0), 2); + sunxi_gpio_set_drv(SUNXI_GPN(1), 2); +#else +#error unsupported MACH_SUNXI +#endif +} + +static void sun8i_rsb_set_clk(struct sunxi_rsb_reg *base) +{ + u32 div = 0; + u32 cd_odly = 0; + + /* Source is Hosc24M, set RSB clk to 3Mhz */ + div = 24000000 / 3000000 / 2 - 1; + cd_odly = div >> 1; + if (!cd_odly) + cd_odly = 1; + + writel((cd_odly << 8) | div, &base->ccr); +} + +static int sun8i_rsb_set_device_mode(struct sunxi_rsb_reg *base) +{ + unsigned long tmo = timer_get_us() + 1000000; + + writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA, + &base->dmcr); + + while (readl(&base->dmcr) & RSB_DMCR_DEVICE_MODE_START) { + if (timer_get_us() > tmo) + return -ETIME; + } + + return sun8i_rsb_await_trans(base); +} + +static int sun8i_rsb_init(struct sunxi_rsb_reg *base) +{ + /* Enable RSB and PIO clk, and de-assert their resets */ + prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB); + + /* Setup external pins */ + sun8i_rsb_cfg_io(); + + writel(RSB_CTRL_SOFT_RST, &base->ctrl); + sun8i_rsb_set_clk(base); + + return sun8i_rsb_set_device_mode(base); +} + +#if IS_ENABLED(CONFIG_AXP_PMIC_BUS) +int rsb_read(const u16 runtime_addr, const u8 reg_addr, u8 *data) +{ + struct sunxi_rsb_reg *base = (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; + + return sun8i_rsb_read(base, runtime_addr, reg_addr, data); +} + +int rsb_write(const u16 runtime_addr, const u8 reg_addr, u8 data) +{ + struct sunxi_rsb_reg *base = (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; + + return sun8i_rsb_write(base, runtime_addr, reg_addr, data); +} + +int rsb_set_device_address(u16 device_addr, u16 runtime_addr) +{ + struct sunxi_rsb_reg *base = (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; + + return sun8i_rsb_set_device_address(base, device_addr, runtime_addr); +} + +int rsb_init(void) +{ + struct sunxi_rsb_reg *base = (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; + + return sun8i_rsb_init(base); +} +#endif + +#if CONFIG_IS_ENABLED(DM_I2C) +struct sun8i_rsb_priv { + struct sunxi_rsb_reg *base; +}; + +/* + * The mapping from hardware address to runtime address is fixed, and shared + * among all RSB drivers. See the comment in drivers/bus/sunxi-rsb.c in Linux. + */ +static int sun8i_rsb_get_runtime_address(u16 device_addr) +{ + if (device_addr == AXP_PMIC_PRI_DEVICE_ADDR) + return AXP_PMIC_PRI_RUNTIME_ADDR; + if (device_addr == AXP_PMIC_SEC_DEVICE_ADDR) + return AXP_PMIC_SEC_RUNTIME_ADDR; + + return -ENXIO; +} + +static int sun8i_rsb_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) +{ + int runtime_addr = sun8i_rsb_get_runtime_address(msg->addr); + struct sun8i_rsb_priv *priv = dev_get_priv(bus); + + if (runtime_addr < 0) + return runtime_addr; + + /* The hardware only supports SMBus-style transfers. */ + if (nmsgs == 2 && msg[1].flags == I2C_M_RD && msg[1].len == 1) + return sun8i_rsb_read(priv->base, runtime_addr, + msg[0].buf[0], &msg[1].buf[0]); + + if (nmsgs == 1 && msg[0].len == 2) + return sun8i_rsb_write(priv->base, runtime_addr, + msg[0].buf[0], msg[0].buf[1]); + + return -EINVAL; +} + +static int sun8i_rsb_probe_chip(struct udevice *bus, uint chip_addr, + uint chip_flags) +{ + int runtime_addr = sun8i_rsb_get_runtime_address(chip_addr); + struct sun8i_rsb_priv *priv = dev_get_priv(bus); + + if (runtime_addr < 0) + return runtime_addr; + + return sun8i_rsb_set_device_address(priv->base, chip_addr, runtime_addr); +} + +static int sun8i_rsb_probe(struct udevice *bus) +{ + struct sun8i_rsb_priv *priv = dev_get_priv(bus); + + priv->base = dev_read_addr_ptr(bus); + + return sun8i_rsb_init(priv->base); +} + +static int sun8i_rsb_child_pre_probe(struct udevice *child) +{ + struct dm_i2c_chip *chip = dev_get_parent_plat(child); + + /* Ensure each transfer is for a single register. */ + chip->flags |= DM_I2C_CHIP_RD_ADDRESS | DM_I2C_CHIP_WR_ADDRESS; + + return 0; +} + +static const struct dm_i2c_ops sun8i_rsb_ops = { + .xfer = sun8i_rsb_xfer, + .probe_chip = sun8i_rsb_probe_chip, +}; + +static const struct udevice_id sun8i_rsb_ids[] = { + { .compatible = "allwinner,sun8i-a23-rsb" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(sun8i_rsb) = { + .name = "sun8i_rsb", + .id = UCLASS_I2C, + .of_match = sun8i_rsb_ids, + .probe = sun8i_rsb_probe, + .child_pre_probe = sun8i_rsb_child_pre_probe, + .priv_auto = sizeof(struct sun8i_rsb_priv), + .ops = &sun8i_rsb_ops, +}; +#endif /* CONFIG_IS_ENABLED(DM_I2C) */ diff --git a/include/axp_pmic.h b/include/axp_pmic.h index 0db3e14..46a017d 100644 --- a/include/axp_pmic.h +++ b/include/axp_pmic.h @@ -30,6 +30,12 @@ #define AXP_PMIC_MODE_REG 0x3e #define AXP_PMIC_MODE_I2C 0x00 #define AXP_PMIC_MODE_P2WI 0x3e +#define AXP_PMIC_MODE_RSB 0x7c + +#define AXP_PMIC_PRI_DEVICE_ADDR 0x3a3 +#define AXP_PMIC_PRI_RUNTIME_ADDR 0x2d +#define AXP_PMIC_SEC_DEVICE_ADDR 0x745 +#define AXP_PMIC_SEC_RUNTIME_ADDR 0x3a int axp_set_dcdc1(unsigned int mvolt); int axp_set_dcdc2(unsigned int mvolt); -- cgit v1.1