diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/dts/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/dts/zynq-cc108.dts | 2 | ||||
-rw-r--r-- | arch/arm/dts/zynq-cse-qspi.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/dts/zynq-topic-miami.dts | 2 | ||||
-rw-r--r-- | arch/arm/dts/zynq-zc702.dts | 30 | ||||
-rw-r--r-- | arch/arm/dts/zynq-zc706.dts | 26 | ||||
-rw-r--r-- | arch/arm/dts/zynq-zc770-xm010.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynq-zc770-xm012.dts | 9 | ||||
-rw-r--r-- | arch/arm/dts/zynq-zc770-xm013.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 8 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-sm-k26-revA.dts | 9 | ||||
-rw-r--r-- | arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts | 2 | ||||
-rw-r--r-- | arch/arm/mach-versal/cpu.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-versal/include/mach/hardware.h | 4 | ||||
-rw-r--r-- | arch/arm/mach-zynqmp/cpu.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-zynqmp/include/mach/hardware.h | 3 | ||||
-rwxr-xr-x | arch/arm/mach-zynqmp/mkimage_fit_atf.sh | 51 |
19 files changed, 148 insertions, 38 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d692139..2d59562 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1064,6 +1064,7 @@ config ARCH_VERSAL select DM_SERIAL select GPIO_EXTRA_HEADER select OF_CONTROL + select SOC_DEVICE imply BOARD_LATE_INIT imply ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -1142,6 +1143,7 @@ config ARCH_ZYNQMP select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL select ZYNQMP_IPI + select SOC_DEVICE imply BOARD_LATE_INIT imply CMD_DM imply ENV_VARS_UBOOT_RUNTIME_CONFIG diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 82a0790..fc16a57 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1133,7 +1133,7 @@ dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb targets += $(dtb-y) # Add any required device tree compiler flags here -DTC_FLAGS += +DTC_FLAGS += -a 0x8 PHONY += dtbs dtbs: $(addprefix $(obj)/, $(dtb-y)) diff --git a/arch/arm/dts/zynq-cc108.dts b/arch/arm/dts/zynq-cc108.dts index 64d73ec..036106e 100644 --- a/arch/arm/dts/zynq-cc108.dts +++ b/arch/arm/dts/zynq-cc108.dts @@ -58,7 +58,7 @@ is-dual = <0>; num-cs = <1>; flash@0 { /* 16 MB */ - compatible = "n25q128a11"; + compatible = "n25q128a11", "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <50000000>; spi-tx-bus-width = <1>; diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi index eb0e29e..38410ee 100644 --- a/arch/arm/dts/zynq-cse-qspi.dtsi +++ b/arch/arm/dts/zynq-cse-qspi.dtsi @@ -60,7 +60,7 @@ #size-cells = <0>; num-cs = <1>; flash0: flash@0 { - compatible = "n25q128a11"; + compatible = "n25q128a11", "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts index ab6bde9..c4ec561 100644 --- a/arch/arm/dts/zynq-topic-miami.dts +++ b/arch/arm/dts/zynq-topic-miami.dts @@ -36,7 +36,7 @@ is-dual = <0>; num-cs = <1>; flash@0 { - compatible = "st,m25p80", "n25q256a"; + compatible = "st,m25p80", "n25q256a", "jedec,spi-nor"; m25p,fast-read; reg = <0x0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index 4474f4b..f2e05a5 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -213,7 +213,7 @@ conf { groups = "can0_9_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -236,7 +236,7 @@ conf { groups = "ethernet0_0_grp"; slew-rate = <0>; - io-standard = <4>; + power-source = <4>; }; conf-rx { @@ -259,7 +259,7 @@ conf-mdio { groups = "mdio0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; }; @@ -277,7 +277,7 @@ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", "gpio0_13_grp", "gpio0_14_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-pull-up { @@ -301,7 +301,7 @@ groups = "i2c0_10_grp"; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -314,7 +314,7 @@ conf { groups = "gpio0_50_grp", "gpio0_51_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -327,7 +327,7 @@ conf { groups = "sdio0_2_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; @@ -341,7 +341,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; mux-wp { @@ -354,7 +354,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -367,7 +367,7 @@ conf { groups = "uart1_10_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -390,7 +390,7 @@ conf { groups = "usb0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -409,6 +409,14 @@ &qspi { u-boot,dm-pre-reloc; status = "okay"; + num-cs = <1>; + flash@0 { + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + }; }; &sdhci0 { diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts index 84729e9..cb919e4 100644 --- a/arch/arm/dts/zynq-zc706.dts +++ b/arch/arm/dts/zynq-zc706.dts @@ -151,7 +151,7 @@ conf { groups = "ethernet0_0_grp"; slew-rate = <0>; - io-standard = <4>; + power-source = <4>; }; conf-rx { @@ -174,7 +174,7 @@ conf-mdio { groups = "mdio0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; }; @@ -188,7 +188,7 @@ conf { groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-pull-up { @@ -212,7 +212,7 @@ groups = "i2c0_10_grp"; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -225,7 +225,7 @@ conf { groups = "sdio0_2_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; bias-disable; }; @@ -239,7 +239,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; mux-wp { @@ -252,7 +252,7 @@ bias-high-impedance; bias-pull-up; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; }; @@ -265,7 +265,7 @@ conf { groups = "uart1_10_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -288,7 +288,7 @@ conf { groups = "usb0_0_grp"; slew-rate = <0>; - io-standard = <1>; + power-source = <1>; }; conf-rx { @@ -307,6 +307,14 @@ &qspi { u-boot,dm-pre-reloc; status = "okay"; + num-cs = <1>; + flash@0 { + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + }; }; &sdhci0 { diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index c547d79..002ff9f 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -62,6 +62,14 @@ &qspi { status = "okay"; + num-cs = <1>; + flash@0 { + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + }; }; &sdhci0 { diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts index 0d001c9..ccf76e7 100644 --- a/arch/arm/dts/zynq-zc770-xm012.dts +++ b/arch/arm/dts/zynq-zc770-xm012.dts @@ -53,6 +53,15 @@ }; }; +&nor0 { + status = "okay"; + bank-width = <1>; +}; + +&smcc { + status = "okay"; +}; + &spi1 { status = "okay"; num-cs = <4>; diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index 7218ee3..455c8a9 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -61,6 +61,14 @@ &qspi { status = "okay"; + num-cs = <1>; + flash@0 { + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + }; }; &spi0 { diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts index 4e8086c..22602d8 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts @@ -12,10 +12,10 @@ * Michal Simek <michal.simek@xilinx.com> */ - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/net/ti-dp83867.h> - #include <dt-bindings/phy/phy.h> - #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> /dts-v1/; /plugin/; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts index 048d566..df054e1 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts @@ -7,10 +7,10 @@ * Michal Simek <michal.simek@xilinx.com> */ - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/net/ti-dp83867.h> - #include <dt-bindings/phy/phy.h> - #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> /dts-v1/; /plugin/; diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts index b613ab2..5f55df2 100644 --- a/arch/arm/dts/zynqmp-sm-k26-revA.dts +++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts @@ -60,13 +60,13 @@ leds { compatible = "gpio-leds"; - ds35 { + ds35-led { label = "heartbeat"; gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - ds36 { + ds36-led { label = "vbus_det"; gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -183,7 +183,7 @@ }; }; -&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A*/ +&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ status = "okay"; non-removable; disable-wp; @@ -204,17 +204,20 @@ &i2c1 { status = "okay"; + u-boot,dm-pre-reloc; clock-frequency = <400000>; scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; eeprom: eeprom@50 { /* u46 - also at address 0x58 */ + u-boot,dm-pre-reloc; compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ reg = <0x50>; /* WP pin EE_WP_EN connected to slg7x644092@68 */ }; eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */ + u-boot,dm-pre-reloc; compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ reg = <0x51>; }; diff --git a/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts b/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts index 6ec96e0..300e2eb 100644 --- a/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts +++ b/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts @@ -58,7 +58,7 @@ status = "okay"; is-dual = <1>; flash@0 { - compatible = "st,m25p80", "n25q256a"; + compatible = "st,m25p80", "n25q256a", "jedec,spi-nor"; m25p,fast-read; reg = <0x0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/mach-versal/cpu.c b/arch/arm/mach-versal/cpu.c index a35aac2..9dc308b 100644 --- a/arch/arm/mach-versal/cpu.c +++ b/arch/arm/mach-versal/cpu.c @@ -13,6 +13,7 @@ #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> #include <asm/cache.h> +#include <dm/platdata.h> DECLARE_GLOBAL_DATA_PTR; @@ -120,3 +121,7 @@ int arm_reserve_mmu(void) return 0; } #endif + +U_BOOT_DRVINFO(soc_xilinx_versal) = { + .name = "soc_xilinx_versal", +}; diff --git a/arch/arm/mach-versal/include/mach/hardware.h b/arch/arm/mach-versal/include/mach/hardware.h index 9af5afd..7b728ac 100644 --- a/arch/arm/mach-versal/include/mach/hardware.h +++ b/arch/arm/mach-versal/include/mach/hardware.h @@ -65,6 +65,10 @@ struct crp_regs { #define crp_base ((struct crp_regs *)VERSAL_CRP_BASEADDR) +#define VERSAL_PS_PMC_VERSION 0xF11A0004 +#define VERSAL_PS_VER_MASK GENMASK(7, 0) +#define VERSAL_PS_VER_SHIFT 12 + /* Bootmode setting values */ #define BOOT_MODES_MASK 0x0000000F #define QSPI_MODE_24BIT 0x00000001 diff --git a/arch/arm/mach-zynqmp/cpu.c b/arch/arm/mach-zynqmp/cpu.c index 29743ca..26e285c 100644 --- a/arch/arm/mach-zynqmp/cpu.c +++ b/arch/arm/mach-zynqmp/cpu.c @@ -15,6 +15,7 @@ #include <asm/io.h> #include <zynqmp_firmware.h> #include <asm/cache.h> +#include <dm/platdata.h> #define ZYNQ_SILICON_VER_MASK 0xF000 #define ZYNQ_SILICON_VER_SHIFT 12 @@ -218,3 +219,7 @@ int zynqmp_mmio_read(const u32 address, u32 *value) return ret; } + +U_BOOT_DRVINFO(soc_xilinx_zynqmp) = { + .name = "soc_xilinx_zynqmp", +}; diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h index 3776499..eebf3855 100644 --- a/arch/arm/mach-zynqmp/include/mach/hardware.h +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h @@ -69,6 +69,9 @@ struct iou_scntr_secure { #define iou_scntr_secure ((struct iou_scntr_secure *)ZYNQMP_IOU_SCNTR_SECURE) +#define ZYNQMP_PS_VERSION 0xFFCA0044 +#define ZYNQMP_PS_VER_MASK GENMASK(1, 0) + /* Bootmode setting values */ #define BOOT_MODES_MASK 0x0000000F #define QSPI_MODE_24BIT 0x00000001 diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh index 592be7f..72a8a3e 100755 --- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh +++ b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh @@ -57,7 +57,7 @@ cat << __HEADER_EOF /dts-v1/; / { - description = "Configuration to load ATF before U-Boot"; + description = "Configuration for Xilinx ZynqMP SoC"; images { uboot { @@ -78,7 +78,7 @@ __HEADER_EOF if [ -f $BL31 ]; then cat << __ATF atf { - description = "ARM Trusted Firmware"; + description = "Trusted Firmware-A"; data = /incbin/("$BL31"); type = "firmware"; os = "arm-trusted-firmware"; @@ -111,6 +111,51 @@ cat << __TEE __TEE fi +MULTI_DTB=`awk '/CONFIG_MULTI_DTB_FIT / { print $3 }' include/generated/autoconf.h` + +if [ 1"$MULTI_DTB" -eq 11 ]; then + cat << __FDT_IMAGE_EOF + fdt_1 { + description = "Multi DTB fit image"; + data = /incbin/("fit-dtb.blob"); + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + $DTB_LOAD + hash { + algo = "md5"; + }; + }; + }; + configurations { + default = "config_1"; +__FDT_IMAGE_EOF + +if [ ! -f $BL31 ]; then +cat << __CONF_SECTION1_EOF + config_1 { + description = "Multi DTB without TF-A"; + firmware = "uboot"; + loadables = "fdt_1"; + }; +__CONF_SECTION1_EOF +else +cat << __CONF_SECTION1_EOF + config_1 { + description = "Multi DTB with TF-A"; + firmware = "atf"; + loadables = "uboot", "fdt_1"; + }; +__CONF_SECTION1_EOF +fi + +cat << __ITS_EOF + }; +}; +__ITS_EOF + +else + DEFAULT=1 cnt=1 for dtname in $DT @@ -181,3 +226,5 @@ cat << __ITS_EOF }; }; __ITS_EOF + +fi |