aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts')
-rw-r--r--arch/arm/dts/Makefile2
-rw-r--r--arch/arm/dts/zynq-cc108.dts2
-rw-r--r--arch/arm/dts/zynq-cse-qspi.dtsi2
-rw-r--r--arch/arm/dts/zynq-topic-miami.dts2
-rw-r--r--arch/arm/dts/zynq-zc702.dts30
-rw-r--r--arch/arm/dts/zynq-zc706.dts26
-rw-r--r--arch/arm/dts/zynq-zc770-xm010.dts8
-rw-r--r--arch/arm/dts/zynq-zc770-xm012.dts9
-rw-r--r--arch/arm/dts/zynq-zc770-xm013.dts8
-rw-r--r--arch/arm/dts/zynqmp-sck-kv-g-revA.dts8
-rw-r--r--arch/arm/dts/zynqmp-sck-kv-g-revB.dts8
-rw-r--r--arch/arm/dts/zynqmp-sm-k26-revA.dts9
-rw-r--r--arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts2
13 files changed, 80 insertions, 36 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 82a0790..fc16a57 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1133,7 +1133,7 @@ dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb
targets += $(dtb-y)
# Add any required device tree compiler flags here
-DTC_FLAGS +=
+DTC_FLAGS += -a 0x8
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
diff --git a/arch/arm/dts/zynq-cc108.dts b/arch/arm/dts/zynq-cc108.dts
index 64d73ec..036106e 100644
--- a/arch/arm/dts/zynq-cc108.dts
+++ b/arch/arm/dts/zynq-cc108.dts
@@ -58,7 +58,7 @@
is-dual = <0>;
num-cs = <1>;
flash@0 { /* 16 MB */
- compatible = "n25q128a11";
+ compatible = "n25q128a11", "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <50000000>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi
index eb0e29e..38410ee 100644
--- a/arch/arm/dts/zynq-cse-qspi.dtsi
+++ b/arch/arm/dts/zynq-cse-qspi.dtsi
@@ -60,7 +60,7 @@
#size-cells = <0>;
num-cs = <1>;
flash0: flash@0 {
- compatible = "n25q128a11";
+ compatible = "n25q128a11", "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts
index ab6bde9..c4ec561 100644
--- a/arch/arm/dts/zynq-topic-miami.dts
+++ b/arch/arm/dts/zynq-topic-miami.dts
@@ -36,7 +36,7 @@
is-dual = <0>;
num-cs = <1>;
flash@0 {
- compatible = "st,m25p80", "n25q256a";
+ compatible = "st,m25p80", "n25q256a", "jedec,spi-nor";
m25p,fast-read;
reg = <0x0>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 4474f4b..f2e05a5 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -213,7 +213,7 @@
conf {
groups = "can0_9_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -236,7 +236,7 @@
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -259,7 +259,7 @@
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -277,7 +277,7 @@
"gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
"gpio0_13_grp", "gpio0_14_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -301,7 +301,7 @@
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -314,7 +314,7 @@
conf {
groups = "gpio0_50_grp", "gpio0_51_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -327,7 +327,7 @@
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -341,7 +341,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -354,7 +354,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -367,7 +367,7 @@
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -390,7 +390,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -409,6 +409,14 @@
&qspi {
u-boot,dm-pre-reloc;
status = "okay";
+ num-cs = <1>;
+ flash@0 {
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ };
};
&sdhci0 {
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 84729e9..cb919e4 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -151,7 +151,7 @@
conf {
groups = "ethernet0_0_grp";
slew-rate = <0>;
- io-standard = <4>;
+ power-source = <4>;
};
conf-rx {
@@ -174,7 +174,7 @@
conf-mdio {
groups = "mdio0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
};
@@ -188,7 +188,7 @@
conf {
groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-pull-up {
@@ -212,7 +212,7 @@
groups = "i2c0_10_grp";
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -225,7 +225,7 @@
conf {
groups = "sdio0_2_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
bias-disable;
};
@@ -239,7 +239,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
mux-wp {
@@ -252,7 +252,7 @@
bias-high-impedance;
bias-pull-up;
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
};
@@ -265,7 +265,7 @@
conf {
groups = "uart1_10_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -288,7 +288,7 @@
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
- io-standard = <1>;
+ power-source = <1>;
};
conf-rx {
@@ -307,6 +307,14 @@
&qspi {
u-boot,dm-pre-reloc;
status = "okay";
+ num-cs = <1>;
+ flash@0 {
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ };
};
&sdhci0 {
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index c547d79..002ff9f 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -62,6 +62,14 @@
&qspi {
status = "okay";
+ num-cs = <1>;
+ flash@0 {
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ };
};
&sdhci0 {
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 0d001c9..ccf76e7 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -53,6 +53,15 @@
};
};
+&nor0 {
+ status = "okay";
+ bank-width = <1>;
+};
+
+&smcc {
+ status = "okay";
+};
+
&spi1 {
status = "okay";
num-cs = <4>;
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 7218ee3..455c8a9 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -61,6 +61,14 @@
&qspi {
status = "okay";
+ num-cs = <1>;
+ flash@0 {
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ };
};
&spi0 {
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
index 4e8086c..22602d8 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -12,10 +12,10 @@
* Michal Simek <michal.simek@xilinx.com>
*/
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/net/ti-dp83867.h>
- #include <dt-bindings/phy/phy.h>
- #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
/dts-v1/;
/plugin/;
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
index 048d566..df054e1 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -7,10 +7,10 @@
* Michal Simek <michal.simek@xilinx.com>
*/
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/net/ti-dp83867.h>
- #include <dt-bindings/phy/phy.h>
- #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
/dts-v1/;
/plugin/;
diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts
index b613ab2..5f55df2 100644
--- a/arch/arm/dts/zynqmp-sm-k26-revA.dts
+++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts
@@ -60,13 +60,13 @@
leds {
compatible = "gpio-leds";
- ds35 {
+ ds35-led {
label = "heartbeat";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- ds36 {
+ ds36-led {
label = "vbus_det";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -183,7 +183,7 @@
};
};
-&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A*/
+&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
status = "okay";
non-removable;
disable-wp;
@@ -204,17 +204,20 @@
&i2c1 {
status = "okay";
+ u-boot,dm-pre-reloc;
clock-frequency = <400000>;
scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
eeprom: eeprom@50 { /* u46 - also at address 0x58 */
+ u-boot,dm-pre-reloc;
compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
reg = <0x50>;
/* WP pin EE_WP_EN connected to slg7x644092@68 */
};
eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
+ u-boot,dm-pre-reloc;
compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
reg = <0x51>;
};
diff --git a/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts b/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
index 6ec96e0..300e2eb 100644
--- a/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
+++ b/arch/arm/dts/zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
@@ -58,7 +58,7 @@
status = "okay";
is-dual = <1>;
flash@0 {
- compatible = "st,m25p80", "n25q256a";
+ compatible = "st,m25p80", "n25q256a", "jedec,spi-nor";
m25p,fast-read;
reg = <0x0>;
spi-tx-bus-width = <1>;
generated by cgit v1.1 at 2024-11-29 08:52:03 +0000