diff options
Diffstat (limited to 'arch/arm/dts/rk3368-px5-evb.dts')
-rw-r--r-- | arch/arm/dts/rk3368-px5-evb.dts | 178 |
1 files changed, 66 insertions, 112 deletions
diff --git a/arch/arm/dts/rk3368-px5-evb.dts b/arch/arm/dts/rk3368-px5-evb.dts index e9c5eba..5ccaa5f 100644 --- a/arch/arm/dts/rk3368-px5-evb.dts +++ b/arch/arm/dts/rk3368-px5-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2017 Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd */ /dts-v1/; @@ -45,30 +8,21 @@ #include <dt-bindings/input/input.h> / { - model = "PX5 EVB"; + model = "Rockchip PX5 EVB"; compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; + aliases { + mmc0 = &sdmmc; + mmc1 = &emmc; + }; + chosen { stdout-path = "serial4:115200n8"; }; memory@0 { - device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; - }; - - ext_gmac: gmac-clk { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - ir: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_int>; + device_type = "memory"; }; keys: gpio-keys { @@ -77,29 +31,13 @@ pinctrl-0 = <&pwr_key>; power { - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; wakeup-source; }; }; - leds: gpio-leds { - compatible = "gpio-leds"; - - blue { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - label = "geekbox:blue:led"; - default-state = "on"; - }; - - red { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - label = "geekbox:red:led"; - default-state = "off"; - }; - }; - vcc_sys: vcc-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -115,27 +53,14 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <150000000>; - disable-wp; - keep-power-in-suspend; + mmc-hs200-1_8v; + no-sdio; + no-sd; non-removable; - num-slots = <1>; - vmmc-supply = <&vcc_io>; - vqmmc-supply = <&vcc18_flash>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; -}; - -&gmac { - status = "okay"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - clock_in_out = "input"; - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x30>; - rx_delay = <0x10>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_flash>; }; &i2c0 { @@ -144,10 +69,10 @@ rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pmic_sleep>; - interrupt-parent = <&gpio0>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; rockchip,system-power-controller; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; @@ -202,12 +127,12 @@ regulator-name = "vcc18_flash"; }; - vcc33_lcd: LDO_REG2 { + vcca_33: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_lcd"; + regulator-name = "vcca_33"; }; vdd_10: LDO_REG3 { @@ -218,11 +143,10 @@ regulator-name = "vdd_10"; }; - vcca_18: LDO_REG4 { - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca_18"; + avdd_33: LDO_REG4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avdd_33"; }; vccio_sd: LDO_REG5 { @@ -258,46 +182,76 @@ }; vcc_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; regulator-name = "vcc_sd"; }; - vcc_lan: SWITCH_REG2 { + vcc33_lcd: SWITCH_REG2 { regulator-always-on; regulator-boot-on; - regulator-name = "vcc_lan"; + regulator-name = "vcc33_lcd"; }; }; }; }; -&pinctrl { - ir { - ir_int: ir-int { - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; - }; +&i2c1 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>; }; +}; +&i2c2 { + status = "okay"; + + gsl1680: touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + silead,max-fingers = <5>; + }; +}; + +&pinctrl { keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; pmic_int: pmic-int { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; -&saradc { +&sdmmc { status = "okay"; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + no-sdio; + sd-uhs-sdr12; + sd-uhs-sdr25; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; }; &tsadc { |