Convert CONFIG_NET_RETRY_COUNT to Kconfig

This converts the following to Kconfig:
   CONFIG_NET_RETRY_COUNT

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

32 files changed, 0 insertions, 73 deletions

diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 78904ac..d95dd8c 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -58,7 +58,6 @@
 #define CONFIG_SYS_I2C_PINMUX_SET	(0x000F)
 
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_NET_RETRY_COUNT	5
 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif				/* FEC_ENET */
 
diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h
index 5ed4eb3..7789c1c 100644
--- a/include/configs/am335x_shc.h
+++ b/include/configs/am335x_shc.h
@@ -168,6 +168,4 @@
 #undef CONFIG_DM_MMC
 #undef CONFIG_TIMER
 #endif
-
-#define CONFIG_NET_RETRY_COUNT         10
 #endif	/* ! __CONFIG_AM335X_SHC_H */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 456ed43..393e15e 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -14,9 +14,6 @@
 
 #include <configs/ti_omap3_common.h>
 
-/* Ethernet */
-#define CONFIG_NET_RETRY_COUNT		10
-
 /* Board NAND Info. */
 #ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, 10, \
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 7bea61e..651eb19 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -145,11 +145,6 @@
 
 #endif
 
-#ifndef CONFIG_SPL_BUILD
-/* CPSW Ethernet */
-#define CONFIG_NET_RETRY_COUNT		10
-#endif
-
 #define PHY_ANEG_TIMEOUT	8000 /* PHY needs longer aneg time at 1G */
 
 #define CONFIG_SYS_RX_ETH_BUFFER	64
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index ff0498a..c36311e 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -45,7 +45,6 @@
 #define CONFIG_HSMMC2_8BIT
 
 /* CPSW Ethernet */
-#define CONFIG_NET_RETRY_COUNT		10
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */
 
 /*
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 995b009..b6d0247 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -66,7 +66,6 @@
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
 #define CONFIG_DM9000_USE_16BIT
 #define CONFIG_DM9000_NO_SROM
-#define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
 
 /* USB */
diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h
index 14b3e52..762d198 100644
--- a/include/configs/bk4r1.h
+++ b/include/configs/bk4r1.h
@@ -34,9 +34,6 @@
 
 /* Enable PREBOOT variable */
 
-/* Set ARP_TIMEOUT_COUNT to 3 repetitions */
-#define CONFIG_NET_RETRY_COUNT	5
-
 /* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
 #define BK4_NET_INIT "run set_gpio122;"
 
diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h
index 9d5a038..6985011 100644
--- a/include/configs/bur_cfg_common.h
+++ b/include/configs/bur_cfg_common.h
@@ -23,9 +23,6 @@
 "setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \
 "setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
 
-/* Network defines */
-#define CONFIG_NET_RETRY_COUNT		10
-
 /* Network console */
 
 /* As stated above, the following choices are optional. */
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 9f12c06..a02a180 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -150,7 +150,6 @@
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_ETHPRIME			"FEC0"
-#define CONFIG_NET_RETRY_COUNT		5
 
 /* USB */
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 6cb75e5..b34a5c9 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -50,7 +50,6 @@
 #define CONFIG_DM9000_BASE		0x08000000
 #define DM9000_IO			(CONFIG_DM9000_BASE)
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
-#define	CONFIG_NET_RETRY_COUNT		10
 #endif
 
 /*
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 5347115..4c25c90 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -64,7 +64,6 @@
 
 /* Ethernet */
 #define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* DFU class support */
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index fa7afab..ff0cc35 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -137,13 +137,6 @@
 #define CONFIG_SYS_NAND_ECCBYTES	10
 #endif
 
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_NET_RETRY_COUNT	10
-#endif
-
 #ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_SYS_FLASH_SECT_SZ	(128 << 10) /* 128KB */
 #define CONFIG_SYS_FLASH_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 0637c7d..16b3650 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -35,7 +35,6 @@
 
 /* Hardware drivers */
 /* DM9000 */
-#define CONFIG_NET_RETRY_COUNT		20
 #define	CONFIG_DRIVER_DM9000		1
 #define	CONFIG_DM9000_BASE		0x2c000000
 #define	DM9000_IO			CONFIG_DM9000_BASE
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 711e37c..4544373 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -55,9 +55,6 @@
 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
 
-/* CPSW Ethernet */
-#define CONFIG_NET_RETRY_COUNT		10
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index ef91146..860709a 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -54,7 +54,6 @@
 /* JFFS2 */
 
 /* Ethernet */
-#define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RMII
 #define CONFIG_PHY_ID			0
 #define CONFIG_MACB_SEARCH_PHY
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index e841c94..df29021 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -68,7 +68,6 @@
 
 /* Ethernet */
 #define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT			20
 #undef CONFIG_RESET_PHY_R
 
 /* hw-controller addresses */
diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
index 77f9d0e..06882fb 100644
--- a/include/configs/mvebu_armada-37xx.h
+++ b/include/configs/mvebu_armada-37xx.h
@@ -40,11 +40,6 @@
  */
 #define DEFAULT_ENV_IS_RW		/* required for configuring default fdtfile= */
 
-/*
- * Ethernet Driver configuration
- */
-#define CONFIG_NET_RETRY_COUNT	50
-
 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /*
diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 049f00f..8e325e8 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -33,11 +33,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-/*
- * Ethernet Driver configuration
- */
-#define CONFIG_NET_RETRY_COUNT	50
-
 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index e70f5fc..512ddbc 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -137,13 +137,6 @@
 #endif
 
 /*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_NET_RETRY_COUNT	10
-#endif
-
-/*
  * U-Boot general configuration
  */
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
index 7db27ab..0a782b4 100644
--- a/include/configs/pic32mzdask.h
+++ b/include/configs/pic32mzdask.h
@@ -48,7 +48,6 @@
  * Networking Configuration
  */
 #define CONFIG_SYS_RX_ETH_BUFFER	8
-#define CONFIG_NET_RETRY_COUNT		20
 
 /*--------------------------------------------------
  * USB Configuration
diff --git a/include/configs/sama7g5ek.h b/include/configs/sama7g5ek.h
index 2d5afab..bca7166 100644
--- a/include/configs/sama7g5ek.h
+++ b/include/configs/sama7g5ek.h
@@ -24,6 +24,4 @@
 	 GENERATED_GBL_DATA_SIZE)
 #endif
 
-#define CONFIG_NET_RETRY_COUNT		50
-
 #endif
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 615458c..6235ad2 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -133,8 +133,6 @@
  * 0x442000 - 0x800000 : Userland
  */
 
-#define CONFIG_NET_RETRY_COUNT         10
-
 /* NAND support */
 #ifdef CONFIG_MTD_RAW_NAND
 /* UBI Support */
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 2a00bfa..7aa6c40 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -86,7 +86,6 @@
  *
  */
 #define CONFIG_RMII			/* use reduced MII inteface */
-#define CONFIG_NET_RETRY_COUNT	20      /* # of DHCP/BOOTP retries */
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* BOOTP and DHCP options */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 5820423..6861344 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -39,7 +39,6 @@
 
 /* Ethernet */
 #define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY
 #define CONFIG_TFTP_PORT
diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index 2377190..069f4c2 100644
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -40,7 +40,6 @@
 
 /* Ethernet */
 #define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY
 #define CONFIG_TFTP_PORT
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 0f786ab..95434aa 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -114,7 +114,6 @@
  */
 
 /* Ethernet */
-#define CONFIG_NET_RETRY_COUNT         10
 #define CONFIG_PHY_ET1011C_TX_CLK_FIX
 
 #endif	/* ! __CONFIG_TI814X_EVM_H */
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 533673b..05f7874 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -68,8 +68,6 @@
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
 
-#define CONFIG_NET_RETRY_COUNT	10
-
 /* Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
  */
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 10da123..f8bd555 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -25,11 +25,6 @@
 #endif
 #define CONFIG_SYS_NS16550_CLK		48000000
 
-#ifndef CONFIG_SPL_BUILD
-/* Network defines. */
-#define CONFIG_NET_RETRY_COUNT         10
-#endif
-
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 0243016..57f013c 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -63,7 +63,6 @@
 #define CONFIG_SYS_SPI_CLK		ks_clk_get_rate(KS2_CLK1_6)
 
 /* Network Configuration */
-#define CONFIG_NET_RETRY_COUNT		32
 #define CONFIG_SYS_SGMII_REFCLK_MHZ	312
 #define CONFIG_SYS_SGMII_LINERATE_MHZ	1250
 #define CONFIG_SYS_SGMII_RATESCALE	2
diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h
index 2a34c8a..dc2fdcc 100644
--- a/include/configs/turris_mox.h
+++ b/include/configs/turris_mox.h
@@ -21,8 +21,6 @@
 					  4000000, 4500000, 5000000, 5500000, \
 					  6000000 }
 
-#define CONFIG_NET_RETRY_COUNT		50
-
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	6
 
 #define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h
index bc40029..128be92 100644
--- a/include/configs/usb_a9263.h
+++ b/include/configs/usb_a9263.h
@@ -45,7 +45,6 @@
 
 /* Ethernet */
 #define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT			20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
 /* USB */
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index 7bd4882..a6511b3 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -50,7 +50,6 @@
 
 /* Ethernet Hardware */
 #define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB_SEARCH_PHY
 
 #ifdef CONFIG_SPI_BOOT