include: configs: j721e_evm: Change to using .env

Move to using .env file for setting up environment variables for J721E
and J7200.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

2 files changed, 94 insertions, 0 deletions

diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
index ca82739..84bca32 100644
--- a/board/ti/j721e/Kconfig
+++ b/board/ti/j721e/Kconfig
@@ -56,6 +56,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "j721e_evm"
 
+config ENV_SOURCE_FILE
+       default "j721e"
+
 source "board/ti/common/Kconfig"
 
 endif
@@ -71,6 +74,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "j721e_evm"
 
+config ENV_SOURCE_FILE
+       default "j721e"
+
 source "board/ti/common/Kconfig"
 
 endif
@@ -86,6 +92,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "j721e_evm"
 
+config ENV_SOURCE_FILE
+       default "j721e"
+
 source "board/ti/common/Kconfig"
 
 endif
@@ -101,6 +110,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "j721e_evm"
 
+config ENV_SOURCE_FILE
+       default "j721e"
+
 source "board/ti/common/Kconfig"
 
 endif
diff --git a/board/ti/j721e/j721e.env b/board/ti/j721e/j721e.env
new file mode 100644
index 0000000..446395a
--- /dev/null
+++ b/board/ti/j721e/j721e.env
@@ -0,0 +1,82 @@
+#include <environment/ti/ti_armv7_common.env>
+#include <environment/ti/mmc.env>
+#include <environment/ti/ufs.env>
+#include <environment/ti/k3_dfu.env>
+
+#if CONFIG_CMD_REMOTEPROC
+#include <environment/ti/k3_rproc.env>
+#endif
+
+default_device_tree=k3-j721e-common-proc-board.dtb
+findfdt=
+	setenv name_fdt ${default_device_tree};
+	if test $board_name = j721e; then
+		setenv name_fdt k3-j721e-common-proc-board.dtb; fi;
+	if test $board_name = j721e-eaik || test $board_name = j721e-sk; then
+		setenv name_fdt k3-j721e-sk.dtb; fi;
+	setenv fdtfile ${name_fdt}
+name_kern=Image
+console=ttyS2,115200n8
+args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000
+	${mtdparts}
+run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+
+#if CONFIG_SYS_K3_SPL_ATF
+#if CONFIG_TARGET_J721E_R5_EVM
+addr_mcur5f0_0load=0x89000000
+name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw
+#elif CONFIG_TARGET_J7200_R5_EVM
+addr_mcur5f0_0load=0x89000000
+name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw
+#endif
+#endif
+
+boot=mmc
+mmcdev=1
+bootpart=1:2
+bootdir=/boot
+rd_spec=-
+init_mmc=run args_all args_mmc
+get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
+get_overlay_mmc=
+	fdt address ${fdtaddr};
+	fdt resize 0x100000;
+	for overlay in $name_overlays;
+	do;
+	load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} &&
+	fdt apply ${dtboaddr};
+	done;
+partitions=uuid_disk=${uuid_gpt_disk};
+	name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
+get_kern_mmc=load mmc ${bootpart} ${loadaddr}
+	${bootdir}/${name_kern}
+get_fit_mmc=load mmc ${bootpart} ${addr_fit}
+	${bootdir}/${name_fit}
+
+#if CONFIG_TARGET_J7200_A72_EVM
+do_main_cpsw0_qsgmii_phyinit=1
+init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;
+	gpio clear gpio@22_16
+main_cpsw0_qsgmii_phyinit=
+	if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then
+		run init_main_cpsw0_qsgmii_phy;
+	fi;
+#elif CONFIG_TARGET_J721E_A72_EVM
+init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;
+	gpio clear gpio@22_16
+main_cpsw0_qsgmii_phyinit=
+	if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then
+		do_main_cpsw0_qsgmii_phyinit=1; else
+		do_main_cpsw0_qsgmii_phyinit=0; fi;
+	if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then
+		run init_main_cpsw0_qsgmii_phy;			\
+	fi;
+#endif
+
+#if CONFIG_TARGET_J721E_A72_EVM
+rproc_fw_binaries=2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
+#endif
+
+#if CONFIG_TARGET_J7200_A72_EVM
+rproc_fw_binaries=2 /lib/firmware/j7200-main-r5f0_0-fw 3 /lib/firmware/j7200-main-r5f0_1-fw
+#endif