Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiWIP/07Jun2023

A small late pull request for Allwinner. The main feature is just a DT
update, matching the v6.4 Linux kernel DT files. This also enables a
board (LCTech Pi F1C200s) which got its .dts file merged into Linux.
Plus a tiny typo fix from Sam.

Gitlab CI passed, briefly tested on an H616 board and the new LCTech Pi.

22 files changed, 271 insertions, 38 deletions

diff --git a/arch/arm/dts/axp22x.dtsi b/arch/arm/dts/axp22x.dtsi
index a020c12..f79650a 100644
--- a/arch/arm/dts/axp22x.dtsi
+++ b/arch/arm/dts/axp22x.dtsi
@@ -67,6 +67,12 @@
 		status = "disabled";
 	};
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;
diff --git a/arch/arm/dts/axp809.dtsi b/arch/arm/dts/axp809.dtsi
index ab8e5f2..d134d4c 100644
--- a/arch/arm/dts/axp809.dtsi
+++ b/arch/arm/dts/axp809.dtsi
@@ -50,4 +50,11 @@
 	compatible = "x-powers,axp809";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/dts/axp81x.dtsi b/arch/arm/dts/axp81x.dtsi
index b93387b..ebaf1c3 100644
--- a/arch/arm/dts/axp81x.dtsi
+++ b/arch/arm/dts/axp81x.dtsi
@@ -62,16 +62,6 @@
 		compatible = "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo-pin {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo-pin {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
 	battery_power_supply: battery-power {
@@ -144,15 +134,11 @@
 		};
 
 		reg_ldo_io0: ldo-io0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
 
 		reg_ldo_io1: ldo-io1 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index b04f492..135762b 100644
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -1197,6 +1197,7 @@
 			compatible = "allwinner,sun50i-a64-mipi-dphy",
 				     "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
index b5c1ff1..ce3ae19 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
@@ -3,6 +3,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/dts/sun5i-gr8-chip-pro.dts b/arch/arm/dts/sun5i-gr8-chip-pro.dts
index a32cde3..5c3562b 100644
--- a/arch/arm/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/dts/sun5i-gr8-chip-pro.dts
@@ -70,7 +70,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip-pro:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts
index 4bf4943..fd37bd1 100644
--- a/arch/arm/dts/sun5i-r8-chip.dts
+++ b/arch/arm/dts/sun5i-r8-chip.dts
@@ -70,7 +70,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
index f6701ec..b32d2ab 100644
--- a/arch/arm/dts/sun6i-a31.dtsi
+++ b/arch/arm/dts/sun6i-a31.dtsi
@@ -820,7 +820,7 @@
 			clocks = <&ccu CLK_APB2_UART0>;
 			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -833,7 +833,7 @@
 			clocks = <&ccu CLK_APB2_UART1>;
 			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -846,7 +846,7 @@
 			clocks = <&ccu CLK_APB2_UART2>;
 			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -859,7 +859,7 @@
 			clocks = <&ccu CLK_APB2_UART3>;
 			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -872,7 +872,7 @@
 			clocks = <&ccu CLK_APB2_UART4>;
 			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -885,7 +885,7 @@
 			clocks = <&ccu CLK_APB2_UART5>;
 			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/dts/sun6i-a31s-sina31s.dts b/arch/arm/dts/sun6i-a31s-sina31s.dts
index 0af48e1..5695635 100644
--- a/arch/arm/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/dts/sun6i-a31s-sina31s.dts
@@ -67,7 +67,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "sina31s:status:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
 		};
diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi
index 06809c3..84c6d93 100644
--- a/arch/arm/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/dts/sun8i-a23-a33.dtsi
@@ -488,7 +488,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -501,7 +501,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -514,7 +514,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -527,7 +527,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -540,7 +540,7 @@
 			clocks = <&ccu CLK_BUS_UART4>;
 			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi
index b3d1bdf..30fdd27 100644
--- a/arch/arm/dts/sun8i-a33.dtsi
+++ b/arch/arm/dts/sun8i-a33.dtsi
@@ -278,6 +278,7 @@
 		dphy: d-phy@1ca1000 {
 			compatible = "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
index b60016a..197cf69 100644
--- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
@@ -105,6 +105,21 @@
 		/* enables internal regulator and de-asserts reset */
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 	};
+
+	/*
+	 * Power supply for the SATA disk, behind a USB-SATA bridge.
+	 * Since it is a USB device, there is no consumer in the DT, so we
+	 * have to keep this always on.
+	 */
+	regulator-sata-disk-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-disk-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+	};
 };
 
 &cpu0 {
diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts
index 27a0d51..a6d38ec 100644
--- a/arch/arm/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts
@@ -57,7 +57,7 @@
 		ethernet1 = &sdiowifi;
 	};
 
-	cec-gpio {
+	cec {
 		compatible = "cec-gpio";
 		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
 		hdmi-phandle = <&hdmi>;
diff --git a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
index 43641cb..343b02b 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
@@ -57,7 +57,7 @@
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi
index db194c6..b001251 100644
--- a/arch/arm/dts/sun8i-v3s.dtsi
+++ b/arch/arm/dts/sun8i-v3s.dtsi
@@ -479,7 +479,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -492,7 +492,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -505,7 +505,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART2>;
 			pinctrl-0 = <&uart2_pins>;
 			pinctrl-names = "default";
diff --git a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
index 04e59b8..4389672 100644
--- a/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "suniv-f1c100s.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Lichee Pi Nano";
 	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
@@ -50,8 +52,22 @@
 	};
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pe_pins>;
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/dts/suniv-f1c100s.dtsi b/arch/arm/dts/suniv-f1c100s.dtsi
index 9455d27..3c61d59 100644
--- a/arch/arm/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/dts/suniv-f1c100s.dtsi
@@ -133,6 +133,32 @@
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,suniv-f1c100s-ccu";
 			reg = <0x01c20000 0x400>;
@@ -181,6 +207,12 @@
 				pins = "PE0", "PE1";
 				function = "uart0";
 			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
 		};
 
 		i2c0: i2c@1c27000 {
diff --git a/arch/arm/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/dts/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 0000000..2d2a3f0
--- /dev/null
+++ b/arch/arm/dts/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 0000000..184c245
--- /dev/null
+++ b/arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/dts/sunxi-h3-h5.dtsi b/arch/arm/dts/sunxi-h3-h5.dtsi
index fc1af9b..bdc796f 100644
--- a/arch/arm/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/dts/sunxi-h3-h5.dtsi
@@ -709,7 +709,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -722,7 +722,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -735,7 +735,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -748,7 +748,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/include/asm/arch-sunxi/pmic_bus.h b/arch/arm/include/asm/arch-sunxi/pmic_bus.h
index 3ccfe13..5ab9b28 100644
--- a/arch/arm/include/asm/arch-sunxi/pmic_bus.h
+++ b/arch/arm/include/asm/arch-sunxi/pmic_bus.h
@@ -6,7 +6,7 @@
  */
 
 #ifndef _SUNXI_PMIC_BUS_H
-#define _SUNXI_PMIS_BUS_H
+#define _SUNXI_PMIC_BUS_H
 
 int pmic_bus_init(void);
 int pmic_bus_read(u8 reg, u8 *data);
diff --git a/configs/lctech_pi_f1c200s_defconfig b/configs/lctech_pi_f1c200s_defconfig
new file mode 100644
index 0000000..310719c
--- /dev/null
+++ b/configs/lctech_pi_f1c200s_defconfig
@@ -0,0 +1,11 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c200s-lctech-pi"
+CONFIG_SPL=y
+CONFIG_MACH_SUNIV=y
+CONFIG_DRAM_CLK=156
+CONFIG_DRAM_ZQ=0
+CONFIG_SUNXI_MINIMUM_DRAM_MB=64
+# CONFIG_VIDEO_SUNXI is not set
+CONFIG_CONS_INDEX=2
+CONFIG_SPI=y