diff options
| author | BALATON Zoltan <balaton@eik.bme.hu> | 2018-07-08 23:22:12 +0200 |
|---|---|---|
| committer | BALATON Zoltan <balaton@eik.bme.hu> | 2018-07-08 23:22:12 +0200 |
| commit | 60b3916f33e617a815973c5a6df77055b2e3a588 (patch) | |
| tree | 823769a135fab77128cab79cd15016491c16c561 | |
| parent | 9f8c9b9251368e8655a0f87ed66dd8d669220bdd (diff) | |
| download | u-boot-sam460ex-master.zip u-boot-sam460ex-master.tar.gz u-boot-sam460ex-master.tar.bz2 | |
| -rw-r--r-- | README | 4303 | ||||
| -rw-r--r-- | README.u-boot | 4297 |
2 files changed, 4305 insertions, 4295 deletions
@@ -1,4297 +1,10 @@ -# -# (C) Copyright 2000 - 2009 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# +This is U-Boot for sam460ex emulation in QEMU. +See README.u-boot for original U-Boot README. -Summary: -======== +This is based on ACube's u-boot-2010.06.05_20110414_prod version which +itself has board specific changes compared to upstream U-Boot but this +version has additional fixes and changes that were only tested on QEMU +not on real hardware. Therefore you should not try to use it on real +hardware as it may not work or may cause problems. -This directory contains the source code for U-Boot, a boot loader for -Embedded boards based on PowerPC, ARM, MIPS and several other -processors, which can be installed in a boot ROM and used to -initialize and test the hardware or to download and run application -code. - -The development of U-Boot is closely related to Linux: some parts of -the source code originate in the Linux source tree, we have some -header files in common, and special provision has been made to -support booting of Linux images. - -Some attention has been paid to make this software easily -configurable and extendable. For instance, all monitor commands are -implemented with the same call interface, so that it's very easy to -add new commands. Also, instead of permanently adding rarely used -code (for instance hardware test utilities) to the monitor, you can -load and run it dynamically. - - -Status: -======= - -In general, all boards for which a configuration option exists in the -Makefile have been tested to some extent and can be considered -"working". In fact, many of them are used in production systems. - -In case of problems see the CHANGELOG and CREDITS files to find out -who contributed the specific port. The MAINTAINERS file lists board -maintainers. - - -Where to get help: -================== - -In case you have questions about, problems with or contributions for -U-Boot you should send a message to the U-Boot mailing list at -<u-boot@lists.denx.de>. There is also an archive of previous traffic -on the mailing list - please search the archive before asking FAQ's. -Please see http://lists.denx.de/pipermail/u-boot and -http://dir.gmane.org/gmane.comp.boot-loaders.u-boot - - -Where to get source code: -========================= - -The U-Boot source code is maintained in the git repository at -git://www.denx.de/git/u-boot.git ; you can browse it online at -http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary - -The "snapshot" links on this page allow you to download tarballs of -any version you might be interested in. Official releases are also -available for FTP download from the ftp://ftp.denx.de/pub/u-boot/ -directory. - -Pre-built (and tested) images are available from -ftp://ftp.denx.de/pub/u-boot/images/ - - -Where we come from: -=================== - -- start from 8xxrom sources -- create PPCBoot project (http://sourceforge.net/projects/ppcboot) -- clean up code -- make it easier to add custom boards -- make it possible to add other [PowerPC] CPUs -- extend functions, especially: - * Provide extended interface to Linux boot loader - * S-Record download - * network boot - * PCMCIA / CompactFlash / ATA disk / SCSI ... boot -- create ARMBoot project (http://sourceforge.net/projects/armboot) -- add other CPU families (starting with ARM) -- create U-Boot project (http://sourceforge.net/projects/u-boot) -- current project page: see http://www.denx.de/wiki/U-Boot - - -Names and Spelling: -=================== - -The "official" name of this project is "Das U-Boot". The spelling -"U-Boot" shall be used in all written text (documentation, comments -in source files etc.). Example: - - This is the README file for the U-Boot project. - -File names etc. shall be based on the string "u-boot". Examples: - - include/asm-ppc/u-boot.h - - #include <asm/u-boot.h> - -Variable names, preprocessor constants etc. shall be either based on -the string "u_boot" or on "U_BOOT". Example: - - U_BOOT_VERSION u_boot_logo - IH_OS_U_BOOT u_boot_hush_start - - -Versioning: -=========== - -U-Boot uses a 3 level version number containing a version, a -sub-version, and a patchlevel: "U-Boot-2.34.5" means version "2", -sub-version "34", and patchlevel "4". - -The patchlevel is used to indicate certain stages of development -between released versions, i. e. officially released versions of -U-Boot will always have a patchlevel of "0". - - -Directory Hierarchy: -==================== - -/arch Architecture specific files - /arm Files generic to ARM architecture - /cpu CPU specific files - /arm720t Files specific to ARM 720 CPUs - /arm920t Files specific to ARM 920 CPUs - /at91rm9200 Files specific to Atmel AT91RM9200 CPU - /imx Files specific to Freescale MC9328 i.MX CPUs - /s3c24x0 Files specific to Samsung S3C24X0 CPUs - /arm925t Files specific to ARM 925 CPUs - /arm926ejs Files specific to ARM 926 CPUs - /arm1136 Files specific to ARM 1136 CPUs - /ixp Files specific to Intel XScale IXP CPUs - /pxa Files specific to Intel XScale PXA CPUs - /s3c44b0 Files specific to Samsung S3C44B0 CPUs - /sa1100 Files specific to Intel StrongARM SA1100 CPUs - /lib Architecture specific library files - /avr32 Files generic to AVR32 architecture - /cpu CPU specific files - /lib Architecture specific library files - /blackfin Files generic to Analog Devices Blackfin architecture - /cpu CPU specific files - /lib Architecture specific library files - /i386 Files generic to i386 architecture - /cpu CPU specific files - /lib Architecture specific library files - /m68k Files generic to m68k architecture - /cpu CPU specific files - /mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs - /mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs - /mcf532x Files specific to Freescale ColdFire MCF5329 CPUs - /mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs - /mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs - /lib Architecture specific library files - /microblaze Files generic to microblaze architecture - /cpu CPU specific files - /lib Architecture specific library files - /mips Files generic to MIPS architecture - /cpu CPU specific files - /lib Architecture specific library files - /nios2 Files generic to Altera NIOS2 architecture - /cpu CPU specific files - /lib Architecture specific library files - /powerpc Files generic to PowerPC architecture - /cpu CPU specific files - /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs - /mpc5xx Files specific to Freescale MPC5xx CPUs - /mpc5xxx Files specific to Freescale MPC5xxx CPUs - /mpc8xx Files specific to Freescale MPC8xx CPUs - /mpc8220 Files specific to Freescale MPC8220 CPUs - /mpc824x Files specific to Freescale MPC824x CPUs - /mpc8260 Files specific to Freescale MPC8260 CPUs - /mpc85xx Files specific to Freescale MPC85xx CPUs - /ppc4xx Files specific to AMCC PowerPC 4xx CPUs - /lib Architecture specific library files - /sh Files generic to SH architecture - /cpu CPU specific files - /sh2 Files specific to sh2 CPUs - /sh3 Files specific to sh3 CPUs - /sh4 Files specific to sh4 CPUs - /lib Architecture specific library files - /sparc Files generic to SPARC architecture - /cpu CPU specific files - /leon2 Files specific to Gaisler LEON2 SPARC CPU - /leon3 Files specific to Gaisler LEON3 SPARC CPU - /lib Architecture specific library files -/api Machine/arch independent API for external apps -/board Board dependent files -/common Misc architecture independent functions -/disk Code for disk drive partition handling -/doc Documentation (don't expect too much) -/drivers Commonly used device drivers -/examples Example code for standalone applications, etc. -/fs Filesystem code (cramfs, ext2, jffs2, etc.) -/include Header Files -/lib Files generic to all architectures - /libfdt Library files to support flattened device trees - /lzma Library files to support LZMA decompression - /lzo Library files to support LZO decompression -/net Networking code -/post Power On Self Test -/rtc Real Time Clock drivers -/tools Tools to build S-Record or U-Boot images, etc. - -Software Configuration: -======================= - -Configuration is usually done using C preprocessor defines; the -rationale behind that is to avoid dead code whenever possible. - -There are two classes of configuration variables: - -* Configuration _OPTIONS_: - These are selectable by the user and have names beginning with - "CONFIG_". - -* Configuration _SETTINGS_: - These depend on the hardware etc. and should not be meddled with if - you don't know what you're doing; they have names beginning with - "CONFIG_SYS_". - -Later we will add a configuration tool - probably similar to or even -identical to what's used for the Linux kernel. Right now, we have to -do the configuration by hand, which means creating some symbolic -links and editing some configuration files. We use the TQM8xxL boards -as an example here. - - -Selection of Processor Architecture and Board Type: ---------------------------------------------------- - -For all supported boards there are ready-to-use default -configurations available; just type "make <board_name>_config". - -Example: For a TQM823L module type: - - cd u-boot - make TQM823L_config - -For the Cogent platform, you need to specify the CPU type as well; -e.g. "make cogent_mpc8xx_config". And also configure the cogent -directory according to the instructions in cogent/README. - - -Configuration Options: ----------------------- - -Configuration depends on the combination of board and CPU type; all -such information is kept in a configuration file -"include/configs/<board_name>.h". - -Example: For a TQM823L module, all configuration settings are in -"include/configs/TQM823L.h". - - -Many of the options are named exactly as the corresponding Linux -kernel configuration options. The intention is to make it easier to -build a config tool - later. - - -The following options need to be configured: - -- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. - -- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. - -- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) - Define exactly one, e.g. CONFIG_ATSTK1002 - -- CPU Module Type: (if CONFIG_COGENT is defined) - Define exactly one of - CONFIG_CMA286_60_OLD ---- FIXME --- not tested yet: - CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P, - CONFIG_CMA287_23, CONFIG_CMA287_50 - -- Motherboard Type: (if CONFIG_COGENT is defined) - Define exactly one of - CONFIG_CMA101, CONFIG_CMA102 - -- Motherboard I/O Modules: (if CONFIG_COGENT is defined) - Define one or more of - CONFIG_CMA302 - -- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined) - Define one or more of - CONFIG_LCD_HEARTBEAT - update a character position on - the LCD display every second with - a "rotator" |\-/|\-/ - -- Board flavour: (if CONFIG_MPC8260ADS is defined) - CONFIG_ADSTYPE - Possible values are: - CONFIG_SYS_8260ADS - original MPC8260ADS - CONFIG_SYS_8266ADS - MPC8266ADS - CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR - CONFIG_SYS_8272ADS - MPC8272ADS - -- MPC824X Family Member (if CONFIG_MPC824X is defined) - Define exactly one of - CONFIG_MPC8240, CONFIG_MPC8245 - -- 8xx CPU Options: (if using an MPC8xx CPU) - CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if - get_gclk_freq() cannot work - e.g. if there is no 32KHz - reference PIT/RTC clock - CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK - or XTAL/EXTAL) - -- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): - CONFIG_SYS_8xx_CPUCLK_MIN - CONFIG_SYS_8xx_CPUCLK_MAX - CONFIG_8xx_CPUCLK_DEFAULT - See doc/README.MPC866 - - CONFIG_SYS_MEASURE_CPUCLK - - Define this to measure the actual CPU clock instead - of relying on the correctness of the configured - values. Mostly useful for board bringup to make sure - the PLL is locked at the intended frequency. Note - that this requires a (stable) reference clock (32 kHz - RTC clock or CONFIG_SYS_8XX_XIN) - - CONFIG_SYS_DELAYED_ICACHE - - Define this option if you want to enable the - ICache only when Code runs from RAM. - -- Intel Monahans options: - CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO - - Defines the Monahans run mode to oscillator - ratio. Valid values are 8, 16, 24, 31. The core - frequency is this value multiplied by 13 MHz. - - CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO - - Defines the Monahans turbo mode to oscillator - ratio. Valid values are 1 (default if undefined) and - 2. The core frequency as calculated above is multiplied - by this value. - -- Linux Kernel Interface: - CONFIG_CLOCKS_IN_MHZ - - U-Boot stores all clock information in Hz - internally. For binary compatibility with older Linux - kernels (which expect the clocks passed in the - bd_info data to be in MHz) the environment variable - "clocks_in_mhz" can be defined so that U-Boot - converts clock data to MHZ before passing it to the - Linux kernel. - When CONFIG_CLOCKS_IN_MHZ is defined, a definition of - "clocks_in_mhz=1" is automatically included in the - default environment. - - CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] - - When transferring memsize parameter to linux, some versions - expect it to be in bytes, others in MB. - Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. - - CONFIG_OF_LIBFDT - - New kernel versions are expecting firmware settings to be - passed using flattened device trees (based on open firmware - concepts). - - CONFIG_OF_LIBFDT - * New libfdt-based support - * Adds the "fdt" command - * The bootm command automatically updates the fdt - - OF_CPU - The proper name of the cpus node (only required for - MPC512X and MPC5xxx based boards). - OF_SOC - The proper name of the soc node (only required for - MPC512X and MPC5xxx based boards). - OF_TBCLK - The timebase frequency. - OF_STDOUT_PATH - The path to the console device - - boards with QUICC Engines require OF_QE to set UCC MAC - addresses - - CONFIG_OF_BOARD_SETUP - - Board code has addition modification that it wants to make - to the flat device tree before handing it off to the kernel - - CONFIG_OF_BOOT_CPU - - This define fills in the correct boot CPU in the boot - param header, the default value is zero if undefined. - - CONFIG_OF_IDE_FIXUP - - U-Boot can detect if an IDE device is present or not. - If not, and this new config option is activated, U-Boot - removes the ATA node from the DTS before booting Linux, - so the Linux IDE driver does not probe the device and - crash. This is needed for buggy hardware (uc101) where - no pull down resistor is connected to the signal IDE5V_DD7. - -- vxWorks boot parameters: - - bootvx constructs a valid bootline using the following - environments variables: bootfile, ipaddr, serverip, hostname. - It loads the vxWorks image pointed bootfile. - - CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name - CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address - CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server - CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters - - CONFIG_SYS_VXWORKS_ADD_PARAMS - - Add it at the end of the bootline. E.g "u=username pw=secret" - - Note: If a "bootargs" environment is defined, it will overwride - the defaults discussed just above. - -- Serial Ports: - CONFIG_PL010_SERIAL - - Define this if you want support for Amba PrimeCell PL010 UARTs. - - CONFIG_PL011_SERIAL - - Define this if you want support for Amba PrimeCell PL011 UARTs. - - CONFIG_PL011_CLOCK - - If you have Amba PrimeCell PL011 UARTs, set this variable to - the clock speed of the UARTs. - - CONFIG_PL01x_PORTS - - If you have Amba PrimeCell PL010 or PL011 UARTs on your board, - define this to a list of base addresses for each (supported) - port. See e.g. include/configs/versatile.h - - -- Console Interface: - Depending on board, define exactly one serial port - (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, - CONFIG_8xx_CONS_SCC1, ...), or switch off the serial - console by defining CONFIG_8xx_CONS_NONE - - Note: if CONFIG_8xx_CONS_NONE is defined, the serial - port routines must be defined elsewhere - (i.e. serial_init(), serial_getc(), ...) - - CONFIG_CFB_CONSOLE - Enables console device for a color framebuffer. Needs following - defines (cf. smiLynxEM, i8042, board/eltec/bab7xx) - VIDEO_FB_LITTLE_ENDIAN graphic memory organisation - (default big endian) - VIDEO_HW_RECTFILL graphic chip supports - rectangle fill - (cf. smiLynxEM) - VIDEO_HW_BITBLT graphic chip supports - bit-blit (cf. smiLynxEM) - VIDEO_VISIBLE_COLS visible pixel columns - (cols=pitch) - VIDEO_VISIBLE_ROWS visible pixel rows - VIDEO_PIXEL_SIZE bytes per pixel - VIDEO_DATA_FORMAT graphic data format - (0-5, cf. cfb_console.c) - VIDEO_FB_ADRS framebuffer address - VIDEO_KBD_INIT_FCT keyboard int fct - (i.e. i8042_kbd_init()) - VIDEO_TSTC_FCT test char fct - (i.e. i8042_tstc) - VIDEO_GETC_FCT get char fct - (i.e. i8042_getc) - CONFIG_CONSOLE_CURSOR cursor drawing on/off - (requires blink timer - cf. i8042.c) - CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) - CONFIG_CONSOLE_TIME display time/date info in - upper right corner - (requires CONFIG_CMD_DATE) - CONFIG_VIDEO_LOGO display Linux logo in - upper left corner - CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of - linux_logo.h for logo. - Requires CONFIG_VIDEO_LOGO - CONFIG_CONSOLE_EXTRA_INFO - additional board info beside - the logo - - When CONFIG_CFB_CONSOLE is defined, video console is - default i/o. Serial console can be forced with - environment 'console=serial'. - - When CONFIG_SILENT_CONSOLE is defined, all console - messages (by U-Boot and Linux!) can be silenced with - the "silent" environment variable. See - doc/README.silent for more information. - -- Console Baudrate: - CONFIG_BAUDRATE - in bps - Select one of the baudrates listed in - CONFIG_SYS_BAUDRATE_TABLE, see below. - CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale - -- Console Rx buffer length - With CONFIG_SYS_SMC_RXBUFLEN it is possible to define - the maximum receive buffer length for the SMC. - This option is actual only for 82xx and 8xx possible. - If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE - must be defined, to setup the maximum idle timeout for - the SMC. - -- Interrupt driven serial port input: - CONFIG_SERIAL_SOFTWARE_FIFO - - PPC405GP only. - Use an interrupt handler for receiving data on the - serial port. It also enables using hardware handshake - (RTS/CTS) and UART's built-in FIFO. Set the number of - bytes the interrupt driven input buffer should have. - - Leave undefined to disable this feature, including - disable the buffer and hardware handshake. - -- Console UART Number: - CONFIG_UART1_CONSOLE - - AMCC PPC4xx only. - If defined internal UART1 (and not UART0) is used - as default U-Boot console. - -- Boot Delay: CONFIG_BOOTDELAY - in seconds - Delay before automatically booting the default image; - set to -1 to disable autoboot. - - See doc/README.autoboot for these options that - work with CONFIG_BOOTDELAY. None are required. - CONFIG_BOOT_RETRY_TIME - CONFIG_BOOT_RETRY_MIN - CONFIG_AUTOBOOT_KEYED - CONFIG_AUTOBOOT_PROMPT - CONFIG_AUTOBOOT_DELAY_STR - CONFIG_AUTOBOOT_STOP_STR - CONFIG_AUTOBOOT_DELAY_STR2 - CONFIG_AUTOBOOT_STOP_STR2 - CONFIG_ZERO_BOOTDELAY_CHECK - CONFIG_RESET_TO_RETRY - -- Autoboot Command: - CONFIG_BOOTCOMMAND - Only needed when CONFIG_BOOTDELAY is enabled; - define a command string that is automatically executed - when no character is read on the console interface - within "Boot Delay" after reset. - - CONFIG_BOOTARGS - This can be used to pass arguments to the bootm - command. The value of CONFIG_BOOTARGS goes into the - environment value "bootargs". - - CONFIG_RAMBOOT and CONFIG_NFSBOOT - The value of these goes into the environment as - "ramboot" and "nfsboot" respectively, and can be used - as a convenience, when switching between booting from - RAM and NFS. - -- Pre-Boot Commands: - CONFIG_PREBOOT - - When this option is #defined, the existence of the - environment variable "preboot" will be checked - immediately before starting the CONFIG_BOOTDELAY - countdown and/or running the auto-boot command resp. - entering interactive mode. - - This feature is especially useful when "preboot" is - automatically generated or modified. For an example - see the LWMON board specific code: here "preboot" is - modified when the user holds down a certain - combination of keys on the (special) keyboard when - booting the systems - -- Serial Download Echo Mode: - CONFIG_LOADS_ECHO - If defined to 1, all characters received during a - serial download (using the "loads" command) are - echoed back. This might be needed by some terminal - emulations (like "cu"), but may as well just take - time on others. This setting #define's the initial - value of the "loads_echo" environment variable. - -- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) - CONFIG_KGDB_BAUDRATE - Select one of the baudrates listed in - CONFIG_SYS_BAUDRATE_TABLE, see below. - -- Monitor Functions: - Monitor commands can be included or excluded - from the build by using the #include files - "config_cmd_all.h" and #undef'ing unwanted - commands, or using "config_cmd_default.h" - and augmenting with additional #define's - for wanted commands. - - The default command configuration includes all commands - except those marked below with a "*". - - CONFIG_CMD_ASKENV * ask for env variable - CONFIG_CMD_BDI bdinfo - CONFIG_CMD_BEDBUG * Include BedBug Debugger - CONFIG_CMD_BMP * BMP support - CONFIG_CMD_BSP * Board specific commands - CONFIG_CMD_BOOTD bootd - CONFIG_CMD_CACHE * icache, dcache - CONFIG_CMD_CONSOLE coninfo - CONFIG_CMD_DATE * support for RTC, date/time... - CONFIG_CMD_DHCP * DHCP support - CONFIG_CMD_DIAG * Diagnostics - CONFIG_CMD_DS4510 * ds4510 I2C gpio commands - CONFIG_CMD_DS4510_INFO * ds4510 I2C info command - CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd - CONFIG_CMD_DS4510_RST * ds4510 I2C rst command - CONFIG_CMD_DTT * Digital Therm and Thermostat - CONFIG_CMD_ECHO echo arguments - CONFIG_CMD_EDITENV edit env variable - CONFIG_CMD_EEPROM * EEPROM read/write support - CONFIG_CMD_ELF * bootelf, bootvx - CONFIG_CMD_SAVEENV saveenv - CONFIG_CMD_FDC * Floppy Disk Support - CONFIG_CMD_FAT * FAT partition support - CONFIG_CMD_FDOS * Dos diskette Support - CONFIG_CMD_FLASH flinfo, erase, protect - CONFIG_CMD_FPGA FPGA device initialization support - CONFIG_CMD_HWFLOW * RTS/CTS hw flow control - CONFIG_CMD_I2C * I2C serial bus support - CONFIG_CMD_IDE * IDE harddisk support - CONFIG_CMD_IMI iminfo - CONFIG_CMD_IMLS List all found images - CONFIG_CMD_IMMAP * IMMR dump support - CONFIG_CMD_IRQ * irqinfo - CONFIG_CMD_ITEST Integer/string test of 2 values - CONFIG_CMD_JFFS2 * JFFS2 Support - CONFIG_CMD_KGDB * kgdb - CONFIG_CMD_LOADB loadb - CONFIG_CMD_LOADS loads - CONFIG_CMD_MD5SUM print md5 message digest - (requires CONFIG_CMD_MEMORY and CONFIG_MD5) - CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, - loop, loopw, mtest - CONFIG_CMD_MISC Misc functions like sleep etc - CONFIG_CMD_MMC * MMC memory mapped support - CONFIG_CMD_MII * MII utility commands - CONFIG_CMD_MTDPARTS * MTD partition support - CONFIG_CMD_NAND * NAND support - CONFIG_CMD_NET bootp, tftpboot, rarpboot - CONFIG_CMD_PCA953X * PCA953x I2C gpio commands - CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command - CONFIG_CMD_PCI * pciinfo - CONFIG_CMD_PCMCIA * PCMCIA support - CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network - host - CONFIG_CMD_PORTIO * Port I/O - CONFIG_CMD_REGINFO * Register dump - CONFIG_CMD_RUN run command in env variable - CONFIG_CMD_SAVES * save S record dump - CONFIG_CMD_SCSI * SCSI Support - CONFIG_CMD_SDRAM * print SDRAM configuration information - (requires CONFIG_CMD_I2C) - CONFIG_CMD_SETGETDCR Support for DCR Register access - (4xx only) - CONFIG_CMD_SHA1 print sha1 memory digest - (requires CONFIG_CMD_MEMORY) - CONFIG_CMD_SOURCE "source" command Support - CONFIG_CMD_SPI * SPI serial bus support - CONFIG_CMD_USB * USB support - CONFIG_CMD_VFD * VFD support (TRAB) - CONFIG_CMD_CDP * Cisco Discover Protocol support - CONFIG_CMD_FSL * Microblaze FSL support - - - EXAMPLE: If you want all functions except of network - support you can write: - - #include "config_cmd_all.h" - #undef CONFIG_CMD_NET - - Other Commands: - fdt (flattened device tree) command: CONFIG_OF_LIBFDT - - Note: Don't enable the "icache" and "dcache" commands - (configuration option CONFIG_CMD_CACHE) unless you know - what you (and your U-Boot users) are doing. Data - cache cannot be enabled on systems like the 8xx or - 8260 (where accesses to the IMMR region must be - uncached), and it cannot be disabled on all other - systems where we (mis-) use the data cache to hold an - initial stack and some data. - - - XXX - this list needs to get updated! - -- Watchdog: - CONFIG_WATCHDOG - If this variable is defined, it enables watchdog - support. There must be support in the platform specific - code for a watchdog. For the 8xx and 8260 CPUs, the - SIU Watchdog feature is enabled in the SYPCR - register. - -- U-Boot Version: - CONFIG_VERSION_VARIABLE - If this variable is defined, an environment variable - named "ver" is created by U-Boot showing the U-Boot - version as printed by the "version" command. - This variable is readonly. - -- Real-Time Clock: - - When CONFIG_CMD_DATE is selected, the type of the RTC - has to be selected, too. Define exactly one of the - following options: - - CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx - CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC - CONFIG_RTC_MC13783 - use MC13783 RTC - CONFIG_RTC_MC146818 - use MC146818 RTC - CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC - CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC - CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC - CONFIG_RTC_DS164x - use Dallas DS164x RTC - CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC - CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC - CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 - - Note that if the RTC uses I2C, then the I2C interface - must also be configured. See I2C Support, below. - -- GPIO Support: - CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO - CONFIG_PCA953X_INFO - enable pca953x info command - - Note that if the GPIO device uses I2C, then the I2C interface - must also be configured. See I2C Support, below. - -- Timestamp Support: - - When CONFIG_TIMESTAMP is selected, the timestamp - (date and time) of an image is printed by image - commands like bootm or iminfo. This option is - automatically enabled when you select CONFIG_CMD_DATE . - -- Partition Support: - CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION - and/or CONFIG_ISO_PARTITION and/or CONFIG_EFI_PARTITION - - If IDE or SCSI support is enabled (CONFIG_CMD_IDE or - CONFIG_CMD_SCSI) you must configure support for at - least one partition type as well. - -- IDE Reset method: - CONFIG_IDE_RESET_ROUTINE - this is defined in several - board configurations files but used nowhere! - - CONFIG_IDE_RESET - is this is defined, IDE Reset will - be performed by calling the function - ide_set_reset(int reset) - which has to be defined in a board specific file - -- ATAPI Support: - CONFIG_ATAPI - - Set this to enable ATAPI support. - -- LBA48 Support - CONFIG_LBA48 - - Set this to enable support for disks larger than 137GB - Also look at CONFIG_SYS_64BIT_LBA. - Whithout these , LBA48 support uses 32bit variables and will 'only' - support disks up to 2.1TB. - - CONFIG_SYS_64BIT_LBA: - When enabled, makes the IDE subsystem use 64bit sector addresses. - Default is 32bit. - -- SCSI Support: - At the moment only there is only support for the - SYM53C8XX SCSI controller; define - CONFIG_SCSI_SYM53C8XX to enable it. - - CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and - CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID * - CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the - maximum numbers of LUNs, SCSI ID's and target - devices. - CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) - -- NETWORK Support (PCI): - CONFIG_E1000 - Support for Intel 8254x gigabit chips. - - CONFIG_E1000_FALLBACK_MAC - default MAC for empty EEPROM after production. - - CONFIG_EEPRO100 - Support for Intel 82557/82559/82559ER chips. - Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM - write routine for first time initialisation. - - CONFIG_TULIP - Support for Digital 2114x chips. - Optional CONFIG_TULIP_SELECT_MEDIA for board specific - modem chip initialisation (KS8761/QS6611). - - CONFIG_NATSEMI - Support for National dp83815 chips. - - CONFIG_NS8382X - Support for National dp8382[01] gigabit chips. - -- NETWORK Support (other): - - CONFIG_DRIVER_AT91EMAC - Support for AT91RM9200 EMAC. - - CONFIG_RMII - Define this to use reduced MII inteface - - CONFIG_DRIVER_AT91EMAC_QUIET - If this defined, the driver is quiet. - The driver doen't show link status messages. - - CONFIG_DRIVER_LAN91C96 - Support for SMSC's LAN91C96 chips. - - CONFIG_LAN91C96_BASE - Define this to hold the physical address - of the LAN91C96's I/O space - - CONFIG_LAN91C96_USE_32_BIT - Define this to enable 32 bit addressing - - CONFIG_DRIVER_SMC91111 - Support for SMSC's LAN91C111 chip - - CONFIG_SMC91111_BASE - Define this to hold the physical address - of the device (I/O space) - - CONFIG_SMC_USE_32_BIT - Define this if data bus is 32 bits - - CONFIG_SMC_USE_IOFUNCS - Define this to use i/o functions instead of macros - (some hardware wont work with macros) - - CONFIG_SMC911X - Support for SMSC's LAN911x and LAN921x chips - - CONFIG_SMC911X_BASE - Define this to hold the physical address - of the device (I/O space) - - CONFIG_SMC911X_32_BIT - Define this if data bus is 32 bits - - CONFIG_SMC911X_16_BIT - Define this if data bus is 16 bits. If your processor - automatically converts one 32 bit word to two 16 bit - words you may also try CONFIG_SMC911X_32_BIT. - -- USB Support: - At the moment only the UHCI host controller is - supported (PIP405, MIP405, MPC5200); define - CONFIG_USB_UHCI to enable it. - define CONFIG_USB_KEYBOARD to enable the USB Keyboard - and define CONFIG_USB_STORAGE to enable the USB - storage devices. - Note: - Supported are USB Keyboards and USB Floppy drives - (TEAC FD-05PUB). - MPC5200 USB requires additional defines: - CONFIG_USB_CLOCK - for 528 MHz Clock: 0x0001bbbb - CONFIG_PSC3_USB - for USB on PSC3 - CONFIG_USB_CONFIG - for differential drivers: 0x00001000 - for single ended drivers: 0x00005000 - for differential drivers on PSC3: 0x00000100 - for single ended drivers on PSC3: 0x00004100 - CONFIG_SYS_USB_EVENT_POLL - May be defined to allow interrupt polling - instead of using asynchronous interrupts - -- USB Device: - Define the below if you wish to use the USB console. - Once firmware is rebuilt from a serial console issue the - command "setenv stdin usbtty; setenv stdout usbtty" and - attach your USB cable. The Unix command "dmesg" should print - it has found a new device. The environment variable usbtty - can be set to gserial or cdc_acm to enable your device to - appear to a USB host as a Linux gserial device or a - Common Device Class Abstract Control Model serial device. - If you select usbtty = gserial you should be able to enumerate - a Linux host by - # modprobe usbserial vendor=0xVendorID product=0xProductID - else if using cdc_acm, simply setting the environment - variable usbtty to be cdc_acm should suffice. The following - might be defined in YourBoardName.h - - CONFIG_USB_DEVICE - Define this to build a UDC device - - CONFIG_USB_TTY - Define this to have a tty type of device available to - talk to the UDC device - - CONFIG_SYS_CONSOLE_IS_IN_ENV - Define this if you want stdin, stdout &/or stderr to - be set to usbtty. - - mpc8xx: - CONFIG_SYS_USB_EXTC_CLK 0xBLAH - Derive USB clock from external clock "blah" - - CONFIG_SYS_USB_EXTC_CLK 0x02 - - CONFIG_SYS_USB_BRG_CLK 0xBLAH - Derive USB clock from brgclk - - CONFIG_SYS_USB_BRG_CLK 0x04 - - If you have a USB-IF assigned VendorID then you may wish to - define your own vendor specific values either in BoardName.h - or directly in usbd_vendor_info.h. If you don't define - CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, - CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot - should pretend to be a Linux device to it's target host. - - CONFIG_USBD_MANUFACTURER - Define this string as the name of your company for - - CONFIG_USBD_MANUFACTURER "my company" - - CONFIG_USBD_PRODUCT_NAME - Define this string as the name of your product - - CONFIG_USBD_PRODUCT_NAME "acme usb device" - - CONFIG_USBD_VENDORID - Define this as your assigned Vendor ID from the USB - Implementors Forum. This *must* be a genuine Vendor ID - to avoid polluting the USB namespace. - - CONFIG_USBD_VENDORID 0xFFFF - - CONFIG_USBD_PRODUCTID - Define this as the unique Product ID - for your device - - CONFIG_USBD_PRODUCTID 0xFFFF - - -- MMC Support: - The MMC controller on the Intel PXA is supported. To - enable this define CONFIG_MMC. The MMC can be - accessed from the boot prompt by mapping the device - to physical memory similar to flash. Command line is - enabled with CONFIG_CMD_MMC. The MMC driver also works with - the FAT fs. This is enabled with CONFIG_CMD_FAT. - -- Journaling Flash filesystem support: - CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, - CONFIG_JFFS2_NAND_DEV - Define these for a default partition on a NAND device - - CONFIG_SYS_JFFS2_FIRST_SECTOR, - CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS - Define these for a default partition on a NOR device - - CONFIG_SYS_JFFS_CUSTOM_PART - Define this to create an own partition. You have to provide a - function struct part_info* jffs2_part_info(int part_num) - - If you define only one JFFS2 partition you may also want to - #define CONFIG_SYS_JFFS_SINGLE_PART 1 - to disable the command chpart. This is the default when you - have not defined a custom partition - -- Keyboard Support: - CONFIG_ISA_KEYBOARD - - Define this to enable standard (PC-Style) keyboard - support - - CONFIG_I8042_KBD - Standard PC keyboard driver with US (is default) and - GERMAN key layout (switch via environment 'keymap=de') support. - Export function i8042_kbd_init, i8042_tstc and i8042_getc - for cfb_console. Supports cursor blinking. - -- Video support: - CONFIG_VIDEO - - Define this to enable video support (for output to - video). - - CONFIG_VIDEO_CT69000 - - Enable Chips & Technologies 69000 Video chip - - CONFIG_VIDEO_SMI_LYNXEM - Enable Silicon Motion SMI 712/710/810 Video chip. The - video output is selected via environment 'videoout' - (1 = LCD and 2 = CRT). If videoout is undefined, CRT is - assumed. - - For the CT69000 and SMI_LYNXEM drivers, videomode is - selected via environment 'videomode'. Two different ways - are possible: - - "videomode=num" 'num' is a standard LiLo mode numbers. - Following standard modes are supported (* is default): - - Colors 640x480 800x600 1024x768 1152x864 1280x1024 - -------------+--------------------------------------------- - 8 bits | 0x301* 0x303 0x305 0x161 0x307 - 15 bits | 0x310 0x313 0x316 0x162 0x319 - 16 bits | 0x311 0x314 0x317 0x163 0x31A - 24 bits | 0x312 0x315 0x318 ? 0x31B - -------------+--------------------------------------------- - (i.e. setenv videomode 317; saveenv; reset;) - - - "videomode=bootargs" all the video parameters are parsed - from the bootargs. (See drivers/video/videomodes.c) - - - CONFIG_VIDEO_SED13806 - Enable Epson SED13806 driver. This driver supports 8bpp - and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP - or CONFIG_VIDEO_SED13806_16BPP - -- Keyboard Support: - CONFIG_KEYBOARD - - Define this to enable a custom keyboard support. - This simply calls drv_keyboard_init() which must be - defined in your board-specific files. - The only board using this so far is RBC823. - -- LCD Support: CONFIG_LCD - - Define this to enable LCD support (for output to LCD - display); also select one of the supported displays - by defining one of these: - - CONFIG_ATMEL_LCD: - - HITACHI TX09D70VM1CCA, 3.5", 240x320. - - CONFIG_NEC_NL6448AC33: - - NEC NL6448AC33-18. Active, color, single scan. - - CONFIG_NEC_NL6448BC20 - - NEC NL6448BC20-08. 6.5", 640x480. - Active, color, single scan. - - CONFIG_NEC_NL6448BC33_54 - - NEC NL6448BC33-54. 10.4", 640x480. - Active, color, single scan. - - CONFIG_SHARP_16x9 - - Sharp 320x240. Active, color, single scan. - It isn't 16x9, and I am not sure what it is. - - CONFIG_SHARP_LQ64D341 - - Sharp LQ64D341 display, 640x480. - Active, color, single scan. - - CONFIG_HLD1045 - - HLD1045 display, 640x480. - Active, color, single scan. - - CONFIG_OPTREX_BW - - Optrex CBL50840-2 NF-FW 99 22 M5 - or - Hitachi LMG6912RPFC-00T - or - Hitachi SP14Q002 - - 320x240. Black & white. - - Normally display is black on white background; define - CONFIG_SYS_WHITE_ON_BLACK to get it inverted. - -- Splash Screen Support: CONFIG_SPLASH_SCREEN - - If this option is set, the environment is checked for - a variable "splashimage". If found, the usual display - of logo, copyright and system information on the LCD - is suppressed and the BMP image at the address - specified in "splashimage" is loaded instead. The - console is redirected to the "nulldev", too. This - allows for a "silent" boot where a splash screen is - loaded very quickly after power-on. - - CONFIG_SPLASH_SCREEN_ALIGN - - If this option is set the splash image can be freely positioned - on the screen. Environment variable "splashpos" specifies the - position as "x,y". If a positive number is given it is used as - number of pixel from left/top. If a negative number is given it - is used as number of pixel from right/bottom. You can also - specify 'm' for centering the image. - - Example: - setenv splashpos m,m - => image at center of screen - - setenv splashpos 30,20 - => image at x = 30 and y = 20 - - setenv splashpos -10,m - => vertically centered image - at x = dspWidth - bmpWidth - 9 - -- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP - - If this option is set, additionally to standard BMP - images, gzipped BMP images can be displayed via the - splashscreen support or the bmp command. - -- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8 - - If this option is set, 8-bit RLE compressed BMP images - can be displayed via the splashscreen support or the - bmp command. - -- Compression support: - CONFIG_BZIP2 - - If this option is set, support for bzip2 compressed - images is included. If not, only uncompressed and gzip - compressed images are supported. - - NOTE: the bzip2 algorithm requires a lot of RAM, so - the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should - be at least 4MB. - - CONFIG_LZMA - - If this option is set, support for lzma compressed - images is included. - - Note: The LZMA algorithm adds between 2 and 4KB of code and it - requires an amount of dynamic memory that is given by the - formula: - - (1846 + 768 << (lc + lp)) * sizeof(uint16) - - Where lc and lp stand for, respectively, Literal context bits - and Literal pos bits. - - This value is upper-bounded by 14MB in the worst case. Anyway, - for a ~4MB large kernel image, we have lc=3 and lp=0 for a - total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is - a very small buffer. - - Use the lzmainfo tool to determinate the lc and lp values and - then calculate the amount of needed dynamic memory (ensuring - the appropriate CONFIG_SYS_MALLOC_LEN value). - -- MII/PHY support: - CONFIG_PHY_ADDR - - The address of PHY on MII bus. - - CONFIG_PHY_CLOCK_FREQ (ppc4xx) - - The clock frequency of the MII bus - - CONFIG_PHY_GIGE - - If this option is set, support for speed/duplex - detection of gigabit PHY is included. - - CONFIG_PHY_RESET_DELAY - - Some PHY like Intel LXT971A need extra delay after - reset before any MII register access is possible. - For such PHY, set this option to the usec delay - required. (minimum 300usec for LXT971A) - - CONFIG_PHY_CMD_DELAY (ppc4xx) - - Some PHY like Intel LXT971A need extra delay after - command issued before MII status register can be read - -- Ethernet address: - CONFIG_ETHADDR - CONFIG_ETH1ADDR - CONFIG_ETH2ADDR - CONFIG_ETH3ADDR - CONFIG_ETH4ADDR - CONFIG_ETH5ADDR - - Define a default value for Ethernet address to use - for the respective Ethernet interface, in case this - is not determined automatically. - -- IP address: - CONFIG_IPADDR - - Define a default value for the IP address to use for - the default Ethernet interface, in case this is not - determined through e.g. bootp. - -- Server IP address: - CONFIG_SERVERIP - - Defines a default value for the IP address of a TFTP - server to contact when using the "tftboot" command. - - CONFIG_KEEP_SERVERADDR - - Keeps the server's MAC address, in the env 'serveraddr' - for passing to bootargs (like Linux's netconsole option) - -- Multicast TFTP Mode: - CONFIG_MCAST_TFTP - - Defines whether you want to support multicast TFTP as per - rfc-2090; for example to work with atftp. Lets lots of targets - tftp down the same boot image concurrently. Note: the Ethernet - driver in use must provide a function: mcast() to join/leave a - multicast group. - - CONFIG_BOOTP_RANDOM_DELAY -- BOOTP Recovery Mode: - CONFIG_BOOTP_RANDOM_DELAY - - If you have many targets in a network that try to - boot using BOOTP, you may want to avoid that all - systems send out BOOTP requests at precisely the same - moment (which would happen for instance at recovery - from a power failure, when all systems will try to - boot, thus flooding the BOOTP server. Defining - CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be - inserted before sending out BOOTP requests. The - following delays are inserted then: - - 1st BOOTP request: delay 0 ... 1 sec - 2nd BOOTP request: delay 0 ... 2 sec - 3rd BOOTP request: delay 0 ... 4 sec - 4th and following - BOOTP requests: delay 0 ... 8 sec - -- DHCP Advanced Options: - You can fine tune the DHCP functionality by defining - CONFIG_BOOTP_* symbols: - - CONFIG_BOOTP_SUBNETMASK - CONFIG_BOOTP_GATEWAY - CONFIG_BOOTP_HOSTNAME - CONFIG_BOOTP_NISDOMAIN - CONFIG_BOOTP_BOOTPATH - CONFIG_BOOTP_BOOTFILESIZE - CONFIG_BOOTP_DNS - CONFIG_BOOTP_DNS2 - CONFIG_BOOTP_SEND_HOSTNAME - CONFIG_BOOTP_NTPSERVER - CONFIG_BOOTP_TIMEOFFSET - CONFIG_BOOTP_VENDOREX - - CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip - environment variable, not the BOOTP server. - - CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS - serverip from a DHCP server, it is possible that more - than one DNS serverip is offered to the client. - If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS - serverip will be stored in the additional environment - variable "dnsip2". The first DNS serverip is always - stored in the variable "dnsip", when CONFIG_BOOTP_DNS - is defined. - - CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable - to do a dynamic update of a DNS server. To do this, they - need the hostname of the DHCP requester. - If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content - of the "hostname" environment variable is passed as - option 12 to the DHCP server. - - CONFIG_BOOTP_DHCP_REQUEST_DELAY - - A 32bit value in microseconds for a delay between - receiving a "DHCP Offer" and sending the "DHCP Request". - This fixes a problem with certain DHCP servers that don't - respond 100% of the time to a "DHCP request". E.g. On an - AT91RM9200 processor running at 180MHz, this delay needed - to be *at least* 15,000 usec before a Windows Server 2003 - DHCP server would reply 100% of the time. I recommend at - least 50,000 usec to be safe. The alternative is to hope - that one of the retries will be successful but note that - the DHCP timeout and retry process takes a longer than - this delay. - - - CDP Options: - CONFIG_CDP_DEVICE_ID - - The device id used in CDP trigger frames. - - CONFIG_CDP_DEVICE_ID_PREFIX - - A two character string which is prefixed to the MAC address - of the device. - - CONFIG_CDP_PORT_ID - - A printf format string which contains the ascii name of - the port. Normally is set to "eth%d" which sets - eth0 for the first Ethernet, eth1 for the second etc. - - CONFIG_CDP_CAPABILITIES - - A 32bit integer which indicates the device capabilities; - 0x00000010 for a normal host which does not forwards. - - CONFIG_CDP_VERSION - - An ascii string containing the version of the software. - - CONFIG_CDP_PLATFORM - - An ascii string containing the name of the platform. - - CONFIG_CDP_TRIGGER - - A 32bit integer sent on the trigger. - - CONFIG_CDP_POWER_CONSUMPTION - - A 16bit integer containing the power consumption of the - device in .1 of milliwatts. - - CONFIG_CDP_APPLIANCE_VLAN_TYPE - - A byte containing the id of the VLAN. - -- Status LED: CONFIG_STATUS_LED - - Several configurations allow to display the current - status using a LED. For instance, the LED will blink - fast while running U-Boot code, stop blinking as - soon as a reply to a BOOTP request was received, and - start blinking slow once the Linux kernel is running - (supported by a status LED driver in the Linux - kernel). Defining CONFIG_STATUS_LED enables this - feature in U-Boot. - -- CAN Support: CONFIG_CAN_DRIVER - - Defining CONFIG_CAN_DRIVER enables CAN driver support - on those systems that support this (optional) - feature, like the TQM8xxL modules. - -- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C - - These enable I2C serial bus commands. Defining either of - (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will - include the appropriate I2C driver for the selected CPU. - - This will allow you to use i2c commands at the u-boot - command line (as long as you set CONFIG_CMD_I2C in - CONFIG_COMMANDS) and communicate with i2c based realtime - clock chips. See common/cmd_i2c.c for a description of the - command line interface. - - CONFIG_HARD_I2C selects a hardware I2C controller. - - CONFIG_SOFT_I2C configures u-boot to use a software (aka - bit-banging) driver instead of CPM or similar hardware - support for I2C. - - There are several other quantities that must also be - defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C. - - In both cases you will need to define CONFIG_SYS_I2C_SPEED - to be the frequency (in Hz) at which you wish your i2c bus - to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie - the CPU's i2c node address). - - Now, the u-boot i2c code for the mpc8xx - (arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node - and so its address should therefore be cleared to 0 (See, - eg, MPC823e User's Manual p.16-473). So, set - CONFIG_SYS_I2C_SLAVE to 0. - - CONFIG_SYS_I2C_INIT_MPC5XXX - - When a board is reset during an i2c bus transfer - chips might think that the current transfer is still - in progress. Reset the slave devices by sending start - commands until the slave device responds. - - That's all that's required for CONFIG_HARD_I2C. - - If you use the software i2c interface (CONFIG_SOFT_I2C) - then the following macros need to be defined (examples are - from include/configs/lwmon.h): - - I2C_INIT - - (Optional). Any commands necessary to enable the I2C - controller or configure ports. - - eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) - - I2C_PORT - - (Only for MPC8260 CPU). The I/O port to use (the code - assumes both bits are on the same port). Valid values - are 0..3 for ports A..D. - - I2C_ACTIVE - - The code necessary to make the I2C data line active - (driven). If the data line is open collector, this - define can be null. - - eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) - - I2C_TRISTATE - - The code necessary to make the I2C data line tri-stated - (inactive). If the data line is open collector, this - define can be null. - - eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) - - I2C_READ - - Code that returns TRUE if the I2C data line is high, - FALSE if it is low. - - eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) - - I2C_SDA(bit) - - If <bit> is TRUE, sets the I2C data line high. If it - is FALSE, it clears it (low). - - eg: #define I2C_SDA(bit) \ - if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA - - I2C_SCL(bit) - - If <bit> is TRUE, sets the I2C clock line high. If it - is FALSE, it clears it (low). - - eg: #define I2C_SCL(bit) \ - if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL - - I2C_DELAY - - This delay is invoked four times per clock cycle so this - controls the rate of data transfer. The data rate thus - is 1 / (I2C_DELAY * 4). Often defined to be something - like: - - #define I2C_DELAY udelay(2) - - CONFIG_SYS_I2C_INIT_BOARD - - When a board is reset during an i2c bus transfer - chips might think that the current transfer is still - in progress. On some boards it is possible to access - the i2c SCLK line directly, either by using the - processor pin as a GPIO or by having a second pin - connected to the bus. If this option is defined a - custom i2c_init_board() routine in boards/xxx/board.c - is run early in the boot sequence. - - CONFIG_SYS_I2C_BOARD_LATE_INIT - - An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is - defined a custom i2c_board_late_init() routine in - boards/xxx/board.c is run AFTER the operations in i2c_init() - is completed. This callpoint can be used to unreset i2c bus - using CPU i2c controller register accesses for CPUs whose i2c - controller provide such a method. It is called at the end of - i2c_init() to allow i2c_init operations to setup the i2c bus - controller on the CPU (e.g. setting bus speed & slave address). - - CONFIG_I2CFAST (PPC405GP|PPC405EP only) - - This option enables configuration of bi_iic_fast[] flags - in u-boot bd_info structure based on u-boot environment - variable "i2cfast". (see also i2cfast) - - CONFIG_I2C_MULTI_BUS - - This option allows the use of multiple I2C buses, each of which - must have a controller. At any point in time, only one bus is - active. To switch to a different bus, use the 'i2c dev' command. - Note that bus numbering is zero-based. - - CONFIG_SYS_I2C_NOPROBES - - This option specifies a list of I2C devices that will be skipped - when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS - is set, specify a list of bus-device pairs. Otherwise, specify - a 1D array of device addresses - - e.g. - #undef CONFIG_I2C_MULTI_BUS - #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68} - - will skip addresses 0x50 and 0x68 on a board with one I2C bus - - #define CONFIG_I2C_MULTI_BUS - #define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} - - will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 - - CONFIG_SYS_SPD_BUS_NUM - - If defined, then this indicates the I2C bus number for DDR SPD. - If not defined, then U-Boot assumes that SPD is on I2C bus 0. - - CONFIG_SYS_RTC_BUS_NUM - - If defined, then this indicates the I2C bus number for the RTC. - If not defined, then U-Boot assumes that RTC is on I2C bus 0. - - CONFIG_SYS_DTT_BUS_NUM - - If defined, then this indicates the I2C bus number for the DTT. - If not defined, then U-Boot assumes that DTT is on I2C bus 0. - - CONFIG_SYS_I2C_DTT_ADDR: - - If defined, specifies the I2C address of the DTT device. - If not defined, then U-Boot uses predefined value for - specified DTT device. - - CONFIG_FSL_I2C - - Define this option if you want to use Freescale's I2C driver in - drivers/i2c/fsl_i2c.c. - - CONFIG_I2C_MUX - - Define this option if you have I2C devices reached over 1 .. n - I2C Muxes like the pca9544a. This option addes a new I2C - Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a - new I2C Bus to the existing I2C Busses. If you select the - new Bus with "i2c dev", u-bbot sends first the commandos for - the muxes to activate this new "bus". - - CONFIG_I2C_MULTI_BUS must be also defined, to use this - feature! - - Example: - Adding a new I2C Bus reached over 2 pca9544a muxes - The First mux with address 70 and channel 6 - The Second mux with address 71 and channel 4 - - => i2c bus pca9544a:70:6:pca9544a:71:4 - - Use the "i2c bus" command without parameter, to get a list - of I2C Busses with muxes: - - => i2c bus - Busses reached over muxes: - Bus ID: 2 - reached over Mux(es): - pca9544a@70 ch: 4 - Bus ID: 3 - reached over Mux(es): - pca9544a@70 ch: 6 - pca9544a@71 ch: 4 - => - - If you now switch to the new I2C Bus 3 with "i2c dev 3" - u-boot sends First the Commando to the mux@70 to enable - channel 6, and then the Commando to the mux@71 to enable - the channel 4. - - After that, you can use the "normal" i2c commands as - usual, to communicate with your I2C devices behind - the 2 muxes. - - This option is actually implemented for the bitbanging - algorithm in common/soft_i2c.c and for the Hardware I2C - Bus on the MPC8260. But it should be not so difficult - to add this option to other architectures. - - CONFIG_SOFT_I2C_READ_REPEATED_START - - defining this will force the i2c_read() function in - the soft_i2c driver to perform an I2C repeated start - between writing the address pointer and reading the - data. If this define is omitted the default behaviour - of doing a stop-start sequence will be used. Most I2C - devices can use either method, but some require one or - the other. - -- SPI Support: CONFIG_SPI - - Enables SPI driver (so far only tested with - SPI EEPROM, also an instance works with Crystal A/D and - D/As on the SACSng board) - - CONFIG_SPI_X - - Enables extended (16-bit) SPI EEPROM addressing. - (symmetrical to CONFIG_I2C_X) - - CONFIG_SOFT_SPI - - Enables a software (bit-bang) SPI driver rather than - using hardware support. This is a general purpose - driver that only requires three general I/O port pins - (two outputs, one input) to function. If this is - defined, the board configuration must define several - SPI configuration items (port pins to use, etc). For - an example, see include/configs/sacsng.h. - - CONFIG_HARD_SPI - - Enables a hardware SPI driver for general-purpose reads - and writes. As with CONFIG_SOFT_SPI, the board configuration - must define a list of chip-select function pointers. - Currently supported on some MPC8xxx processors. For an - example, see include/configs/mpc8349emds.h. - - CONFIG_MXC_SPI - - Enables the driver for the SPI controllers on i.MX and MXC - SoCs. Currently only i.MX31 is supported. - -- FPGA Support: CONFIG_FPGA - - Enables FPGA subsystem. - - CONFIG_FPGA_<vendor> - - Enables support for specific chip vendors. - (ALTERA, XILINX) - - CONFIG_FPGA_<family> - - Enables support for FPGA family. - (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX) - - CONFIG_FPGA_COUNT - - Specify the number of FPGA devices to support. - - CONFIG_SYS_FPGA_PROG_FEEDBACK - - Enable printing of hash marks during FPGA configuration. - - CONFIG_SYS_FPGA_CHECK_BUSY - - Enable checks on FPGA configuration interface busy - status by the configuration function. This option - will require a board or device specific function to - be written. - - CONFIG_FPGA_DELAY - - If defined, a function that provides delays in the FPGA - configuration driver. - - CONFIG_SYS_FPGA_CHECK_CTRLC - Allow Control-C to interrupt FPGA configuration - - CONFIG_SYS_FPGA_CHECK_ERROR - - Check for configuration errors during FPGA bitfile - loading. For example, abort during Virtex II - configuration if the INIT_B line goes low (which - indicated a CRC error). - - CONFIG_SYS_FPGA_WAIT_INIT - - Maximum time to wait for the INIT_B line to deassert - after PROB_B has been deasserted during a Virtex II - FPGA configuration sequence. The default time is 500 - ms. - - CONFIG_SYS_FPGA_WAIT_BUSY - - Maximum time to wait for BUSY to deassert during - Virtex II FPGA configuration. The default is 5 ms. - - CONFIG_SYS_FPGA_WAIT_CONFIG - - Time to wait after FPGA configuration. The default is - 200 ms. - -- Configuration Management: - CONFIG_IDENT_STRING - - If defined, this string will be added to the U-Boot - version information (U_BOOT_VERSION) - -- Vendor Parameter Protection: - - U-Boot considers the values of the environment - variables "serial#" (Board Serial Number) and - "ethaddr" (Ethernet Address) to be parameters that - are set once by the board vendor / manufacturer, and - protects these variables from casual modification by - the user. Once set, these variables are read-only, - and write or delete attempts are rejected. You can - change this behaviour: - - If CONFIG_ENV_OVERWRITE is #defined in your config - file, the write protection for vendor parameters is - completely disabled. Anybody can change or delete - these parameters. - - Alternatively, if you #define _both_ CONFIG_ETHADDR - _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default - Ethernet address is installed in the environment, - which can be changed exactly ONCE by the user. [The - serial# is unaffected by this, i. e. it remains - read-only.] - -- Protected RAM: - CONFIG_PRAM - - Define this variable to enable the reservation of - "protected RAM", i. e. RAM which is not overwritten - by U-Boot. Define CONFIG_PRAM to hold the number of - kB you want to reserve for pRAM. You can overwrite - this default value by defining an environment - variable "pram" to the number of kB you want to - reserve. Note that the board info structure will - still show the full amount of RAM. If pRAM is - reserved, a new environment variable "mem" will - automatically be defined to hold the amount of - remaining RAM in a form that can be passed as boot - argument to Linux, for instance like that: - - setenv bootargs ... mem=\${mem} - saveenv - - This way you can tell Linux not to use this memory, - either, which results in a memory region that will - not be affected by reboots. - - *WARNING* If your board configuration uses automatic - detection of the RAM size, you must make sure that - this memory test is non-destructive. So far, the - following board configurations are known to be - "pRAM-clean": - - ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL, - HERMES, IP860, RPXlite, LWMON, LANTEC, - PCU_E, FLAGADM, TQM8260 - -- Error Recovery: - CONFIG_PANIC_HANG - - Define this variable to stop the system in case of a - fatal error, so that you have to reset it manually. - This is probably NOT a good idea for an embedded - system where you want the system to reboot - automatically as fast as possible, but it may be - useful during development since you can try to debug - the conditions that lead to the situation. - - CONFIG_NET_RETRY_COUNT - - This variable defines the number of retries for - network operations like ARP, RARP, TFTP, or BOOTP - before giving up the operation. If not defined, a - default value of 5 is used. - - CONFIG_ARP_TIMEOUT - - Timeout waiting for an ARP reply in milliseconds. - -- Command Interpreter: - CONFIG_AUTO_COMPLETE - - Enable auto completion of commands using TAB. - - Note that this feature has NOT been implemented yet - for the "hush" shell. - - - CONFIG_SYS_HUSH_PARSER - - Define this variable to enable the "hush" shell (from - Busybox) as command line interpreter, thus enabling - powerful command line syntax like - if...then...else...fi conditionals or `&&' and '||' - constructs ("shell scripts"). - - If undefined, you get the old, much simpler behaviour - with a somewhat smaller memory footprint. - - - CONFIG_SYS_PROMPT_HUSH_PS2 - - This defines the secondary prompt string, which is - printed when the command interpreter needs more input - to complete a command. Usually "> ". - - Note: - - In the current implementation, the local variables - space and global environment variables space are - separated. Local variables are those you define by - simply typing `name=value'. To access a local - variable later on, you have write `$name' or - `${name}'; to execute the contents of a variable - directly type `$name' at the command prompt. - - Global environment variables are those you use - setenv/printenv to work with. To run a command stored - in such a variable, you need to use the run command, - and you must not use the '$' sign to access them. - - To store commands and special characters in a - variable, please use double quotation marks - surrounding the whole text of the variable, instead - of the backslashes before semicolons and special - symbols. - -- Commandline Editing and History: - CONFIG_CMDLINE_EDITING - - Enable editing and History functions for interactive - commandline input operations - -- Default Environment: - CONFIG_EXTRA_ENV_SETTINGS - - Define this to contain any number of null terminated - strings (variable = value pairs) that will be part of - the default environment compiled into the boot image. - - For example, place something like this in your - board's config file: - - #define CONFIG_EXTRA_ENV_SETTINGS \ - "myvar1=value1\0" \ - "myvar2=value2\0" - - Warning: This method is based on knowledge about the - internal format how the environment is stored by the - U-Boot code. This is NOT an official, exported - interface! Although it is unlikely that this format - will change soon, there is no guarantee either. - You better know what you are doing here. - - Note: overly (ab)use of the default environment is - discouraged. Make sure to check other ways to preset - the environment like the "source" command or the - boot command first. - -- DataFlash Support: - CONFIG_HAS_DATAFLASH - - Defining this option enables DataFlash features and - allows to read/write in Dataflash via the standard - commands cp, md... - -- SystemACE Support: - CONFIG_SYSTEMACE - - Adding this option adds support for Xilinx SystemACE - chips attached via some sort of local bus. The address - of the chip must also be defined in the - CONFIG_SYS_SYSTEMACE_BASE macro. For example: - - #define CONFIG_SYSTEMACE - #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000 - - When SystemACE support is added, the "ace" device type - becomes available to the fat commands, i.e. fatls. - -- TFTP Fixed UDP Port: - CONFIG_TFTP_PORT - - If this is defined, the environment variable tftpsrcp - is used to supply the TFTP UDP source port value. - If tftpsrcp isn't defined, the normal pseudo-random port - number generator is used. - - Also, the environment variable tftpdstp is used to supply - the TFTP UDP destination port value. If tftpdstp isn't - defined, the normal port 69 is used. - - The purpose for tftpsrcp is to allow a TFTP server to - blindly start the TFTP transfer using the pre-configured - target IP address and UDP port. This has the effect of - "punching through" the (Windows XP) firewall, allowing - the remainder of the TFTP transfer to proceed normally. - A better solution is to properly configure the firewall, - but sometimes that is not allowed. - -- Show boot progress: - CONFIG_SHOW_BOOT_PROGRESS - - Defining this option allows to add some board- - specific code (calling a user-provided function - "show_boot_progress(int)") that enables you to show - the system's boot progress on some display (for - example, some LED's) on your board. At the moment, - the following checkpoints are implemented: - -Legacy uImage format: - - Arg Where When - 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number - 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum - 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum - 4 common/cmd_bootm.c Image data has correct checksum - -4 common/cmd_bootm.c Image is for unsupported architecture - 5 common/cmd_bootm.c Architecture check OK - -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) - 6 common/cmd_bootm.c Image Type check OK - -6 common/cmd_bootm.c gunzip uncompression error - -7 common/cmd_bootm.c Unimplemented compression type - 7 common/cmd_bootm.c Uncompression OK - 8 common/cmd_bootm.c No uncompress/copy overwrite error - -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) - - 9 common/image.c Start initial ramdisk verification - -10 common/image.c Ramdisk header has bad magic number - -11 common/image.c Ramdisk header has bad checksum - 10 common/image.c Ramdisk header is OK - -12 common/image.c Ramdisk data has bad checksum - 11 common/image.c Ramdisk data has correct checksum - 12 common/image.c Ramdisk verification complete, start loading - -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) - 13 common/image.c Start multifile image verification - 14 common/image.c No initial ramdisk, no multifile, continue. - - 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS - - -30 arch/powerpc/lib/board.c Fatal error, hang the system - -31 post/post.c POST test failed, detected by post_output_backlog() - -32 post/post.c POST test failed, detected by post_run_single() - - 34 common/cmd_doc.c before loading a Image from a DOC device - -35 common/cmd_doc.c Bad usage of "doc" command - 35 common/cmd_doc.c correct usage of "doc" command - -36 common/cmd_doc.c No boot device - 36 common/cmd_doc.c correct boot device - -37 common/cmd_doc.c Unknown Chip ID on boot device - 37 common/cmd_doc.c correct chip ID found, device available - -38 common/cmd_doc.c Read Error on boot device - 38 common/cmd_doc.c reading Image header from DOC device OK - -39 common/cmd_doc.c Image header has bad magic number - 39 common/cmd_doc.c Image header has correct magic number - -40 common/cmd_doc.c Error reading Image from DOC device - 40 common/cmd_doc.c Image header has correct magic number - 41 common/cmd_ide.c before loading a Image from a IDE device - -42 common/cmd_ide.c Bad usage of "ide" command - 42 common/cmd_ide.c correct usage of "ide" command - -43 common/cmd_ide.c No boot device - 43 common/cmd_ide.c boot device found - -44 common/cmd_ide.c Device not available - 44 common/cmd_ide.c Device available - -45 common/cmd_ide.c wrong partition selected - 45 common/cmd_ide.c partition selected - -46 common/cmd_ide.c Unknown partition table - 46 common/cmd_ide.c valid partition table found - -47 common/cmd_ide.c Invalid partition type - 47 common/cmd_ide.c correct partition type - -48 common/cmd_ide.c Error reading Image Header on boot device - 48 common/cmd_ide.c reading Image Header from IDE device OK - -49 common/cmd_ide.c Image header has bad magic number - 49 common/cmd_ide.c Image header has correct magic number - -50 common/cmd_ide.c Image header has bad checksum - 50 common/cmd_ide.c Image header has correct checksum - -51 common/cmd_ide.c Error reading Image from IDE device - 51 common/cmd_ide.c reading Image from IDE device OK - 52 common/cmd_nand.c before loading a Image from a NAND device - -53 common/cmd_nand.c Bad usage of "nand" command - 53 common/cmd_nand.c correct usage of "nand" command - -54 common/cmd_nand.c No boot device - 54 common/cmd_nand.c boot device found - -55 common/cmd_nand.c Unknown Chip ID on boot device - 55 common/cmd_nand.c correct chip ID found, device available - -56 common/cmd_nand.c Error reading Image Header on boot device - 56 common/cmd_nand.c reading Image Header from NAND device OK - -57 common/cmd_nand.c Image header has bad magic number - 57 common/cmd_nand.c Image header has correct magic number - -58 common/cmd_nand.c Error reading Image from NAND device - 58 common/cmd_nand.c reading Image from NAND device OK - - -60 common/env_common.c Environment has a bad CRC, using default - - 64 net/eth.c starting with Ethernet configuration. - -64 net/eth.c no Ethernet found. - 65 net/eth.c Ethernet found. - - -80 common/cmd_net.c usage wrong - 80 common/cmd_net.c before calling NetLoop() - -81 common/cmd_net.c some error in NetLoop() occurred - 81 common/cmd_net.c NetLoop() back without error - -82 common/cmd_net.c size == 0 (File with size 0 loaded) - 82 common/cmd_net.c trying automatic boot - 83 common/cmd_net.c running "source" command - -83 common/cmd_net.c some error in automatic boot or "source" command - 84 common/cmd_net.c end without errors - -FIT uImage format: - - Arg Where When - 100 common/cmd_bootm.c Kernel FIT Image has correct format - -100 common/cmd_bootm.c Kernel FIT Image has incorrect format - 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration - -101 common/cmd_bootm.c Can't get configuration for kernel subimage - 102 common/cmd_bootm.c Kernel unit name specified - -103 common/cmd_bootm.c Can't get kernel subimage node offset - 103 common/cmd_bootm.c Found configuration node - 104 common/cmd_bootm.c Got kernel subimage node offset - -104 common/cmd_bootm.c Kernel subimage hash verification failed - 105 common/cmd_bootm.c Kernel subimage hash verification OK - -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture - 106 common/cmd_bootm.c Architecture check OK - -106 common/cmd_bootm.c Kernel subimage has wrong type - 107 common/cmd_bootm.c Kernel subimage type OK - -107 common/cmd_bootm.c Can't get kernel subimage data/size - 108 common/cmd_bootm.c Got kernel subimage data/size - -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) - -109 common/cmd_bootm.c Can't get kernel subimage type - -110 common/cmd_bootm.c Can't get kernel subimage comp - -111 common/cmd_bootm.c Can't get kernel subimage os - -112 common/cmd_bootm.c Can't get kernel subimage load address - -113 common/cmd_bootm.c Image uncompress/copy overwrite error - - 120 common/image.c Start initial ramdisk verification - -120 common/image.c Ramdisk FIT image has incorrect format - 121 common/image.c Ramdisk FIT image has correct format - 122 common/image.c No ramdisk subimage unit name, using configuration - -122 common/image.c Can't get configuration for ramdisk subimage - 123 common/image.c Ramdisk unit name specified - -124 common/image.c Can't get ramdisk subimage node offset - 125 common/image.c Got ramdisk subimage node offset - -125 common/image.c Ramdisk subimage hash verification failed - 126 common/image.c Ramdisk subimage hash verification OK - -126 common/image.c Ramdisk subimage for unsupported architecture - 127 common/image.c Architecture check OK - -127 common/image.c Can't get ramdisk subimage data/size - 128 common/image.c Got ramdisk subimage data/size - 129 common/image.c Can't get ramdisk load address - -129 common/image.c Got ramdisk load address - - -130 common/cmd_doc.c Incorrect FIT image format - 131 common/cmd_doc.c FIT image format OK - - -140 common/cmd_ide.c Incorrect FIT image format - 141 common/cmd_ide.c FIT image format OK - - -150 common/cmd_nand.c Incorrect FIT image format - 151 common/cmd_nand.c FIT image format OK - -- Automatic software updates via TFTP server - CONFIG_UPDATE_TFTP - CONFIG_UPDATE_TFTP_CNT_MAX - CONFIG_UPDATE_TFTP_MSEC_MAX - - These options enable and control the auto-update feature; - for a more detailed description refer to doc/README.update. - -- MTD Support (mtdparts command, UBI support) - CONFIG_MTD_DEVICE - - Adds the MTD device infrastructure from the Linux kernel. - Needed for mtdparts command support. - - CONFIG_MTD_PARTITIONS - - Adds the MTD partitioning infrastructure from the Linux - kernel. Needed for UBI support. - - -Modem Support: --------------- - -[so far only for SMDK2400 and TRAB boards] - -- Modem support enable: - CONFIG_MODEM_SUPPORT - -- RTS/CTS Flow control enable: - CONFIG_HWFLOW - -- Modem debug support: - CONFIG_MODEM_SUPPORT_DEBUG - - Enables debugging stuff (char screen[1024], dbg()) - for modem support. Useful only with BDI2000. - -- Interrupt support (PPC): - - There are common interrupt_init() and timer_interrupt() - for all PPC archs. interrupt_init() calls interrupt_init_cpu() - for CPU specific initialization. interrupt_init_cpu() - should set decrementer_count to appropriate value. If - CPU resets decrementer automatically after interrupt - (ppc4xx) it should set decrementer_count to zero. - timer_interrupt() calls timer_interrupt_cpu() for CPU - specific handling. If board has watchdog / status_led - / other_activity_monitor it works automatically from - general timer_interrupt(). - -- General: - - In the target system modem support is enabled when a - specific key (key combination) is pressed during - power-on. Otherwise U-Boot will boot normally - (autoboot). The key_pressed() function is called from - board_init(). Currently key_pressed() is a dummy - function, returning 1 and thus enabling modem - initialization. - - If there are no modem init strings in the - environment, U-Boot proceed to autoboot; the - previous output (banner, info printfs) will be - suppressed, though. - - See also: doc/README.Modem - - -Configuration Settings: ------------------------ - -- CONFIG_SYS_LONGHELP: Defined when you want long help messages included; - undefine this when you're short of memory. - -- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default - width of the commands listed in the 'help' command output. - -- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to - prompt for user input. - -- CONFIG_SYS_CBSIZE: Buffer size for input from the Console - -- CONFIG_SYS_PBSIZE: Buffer size for Console output - -- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands - -- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to - the application (usually a Linux kernel) when it is - booted - -- CONFIG_SYS_BAUDRATE_TABLE: - List of legal baudrate settings for this board. - -- CONFIG_SYS_CONSOLE_INFO_QUIET - Suppress display of console information at boot. - -- CONFIG_SYS_CONSOLE_IS_IN_ENV - If the board specific function - extern int overwrite_console (void); - returns 1, the stdin, stderr and stdout are switched to the - serial port, else the settings in the environment are used. - -- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE - Enable the call to overwrite_console(). - -- CONFIG_SYS_CONSOLE_ENV_OVERWRITE - Enable overwrite of previous console environment settings. - -- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END: - Begin and End addresses of the area used by the - simple memory test. - -- CONFIG_SYS_ALT_MEMTEST: - Enable an alternate, more extensive memory test. - -- CONFIG_SYS_MEMTEST_SCRATCH: - Scratch address used by the alternate memory test - You only need to set this if address zero isn't writeable - -- CONFIG_SYS_MEM_TOP_HIDE (PPC only): - If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header, - this specified memory area will get subtracted from the top - (end) of RAM and won't get "touched" at all by U-Boot. By - fixing up gd->ram_size the Linux kernel should gets passed - the now "corrected" memory size and won't touch it either. - This should work for arch/ppc and arch/powerpc. Only Linux - board ports in arch/powerpc with bootwrapper support that - recalculate the memory size from the SDRAM controller setup - will have to get fixed in Linux additionally. - - This option can be used as a workaround for the 440EPx/GRx - CHIP 11 errata where the last 256 bytes in SDRAM shouldn't - be touched. - - WARNING: Please make sure that this value is a multiple of - the Linux page size (normally 4k). If this is not the case, - then the end address of the Linux memory will be located at a - non page size aligned address and this could cause major - problems. - -- CONFIG_SYS_TFTP_LOADADDR: - Default load address for network file downloads - -- CONFIG_SYS_LOADS_BAUD_CHANGE: - Enable temporary baudrate change while serial download - -- CONFIG_SYS_SDRAM_BASE: - Physical start address of SDRAM. _Must_ be 0 here. - -- CONFIG_SYS_MBIO_BASE: - Physical start address of Motherboard I/O (if using a - Cogent motherboard) - -- CONFIG_SYS_FLASH_BASE: - Physical start address of Flash memory. - -- CONFIG_SYS_MONITOR_BASE: - Physical start address of boot monitor code (set by - make config files to be same as the text base address - (TEXT_BASE) used when linking) - same as - CONFIG_SYS_FLASH_BASE when booting from flash. - -- CONFIG_SYS_MONITOR_LEN: - Size of memory reserved for monitor code, used to - determine _at_compile_time_ (!) if the environment is - embedded within the U-Boot image, or in a separate - flash sector. - -- CONFIG_SYS_MALLOC_LEN: - Size of DRAM reserved for malloc() use. - -- CONFIG_SYS_BOOTM_LEN: - Normally compressed uImages are limited to an - uncompressed size of 8 MBytes. If this is not enough, - you can define CONFIG_SYS_BOOTM_LEN in your board config file - to adjust this setting to your needs. - -- CONFIG_SYS_BOOTMAPSZ: - Maximum size of memory mapped by the startup code of - the Linux kernel; all data that must be processed by - the Linux kernel (bd_info, boot arguments, FDT blob if - used) must be put below this limit, unless "bootm_low" - enviroment variable is defined and non-zero. In such case - all data for the Linux kernel must be between "bootm_low" - and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. - -- CONFIG_SYS_MAX_FLASH_BANKS: - Max number of Flash memory banks - -- CONFIG_SYS_MAX_FLASH_SECT: - Max number of sectors on a Flash chip - -- CONFIG_SYS_FLASH_ERASE_TOUT: - Timeout for Flash erase operations (in ms) - -- CONFIG_SYS_FLASH_WRITE_TOUT: - Timeout for Flash write operations (in ms) - -- CONFIG_SYS_FLASH_LOCK_TOUT - Timeout for Flash set sector lock bit operation (in ms) - -- CONFIG_SYS_FLASH_UNLOCK_TOUT - Timeout for Flash clear lock bits operation (in ms) - -- CONFIG_SYS_FLASH_PROTECTION - If defined, hardware flash sectors protection is used - instead of U-Boot software protection. - -- CONFIG_SYS_DIRECT_FLASH_TFTP: - - Enable TFTP transfers directly to flash memory; - without this option such a download has to be - performed in two steps: (1) download to RAM, and (2) - copy from RAM to flash. - - The two-step approach is usually more reliable, since - you can check if the download worked before you erase - the flash, but in some situations (when system RAM is - too limited to allow for a temporary copy of the - downloaded image) this option may be very useful. - -- CONFIG_SYS_FLASH_CFI: - Define if the flash driver uses extra elements in the - common flash structure for storing flash geometry. - -- CONFIG_FLASH_CFI_DRIVER - This option also enables the building of the cfi_flash driver - in the drivers directory - -- CONFIG_FLASH_CFI_MTD - This option enables the building of the cfi_mtd driver - in the drivers directory. The driver exports CFI flash - to the MTD layer. - -- CONFIG_SYS_FLASH_USE_BUFFER_WRITE - Use buffered writes to flash. - -- CONFIG_FLASH_SPANSION_S29WS_N - s29ws-n MirrorBit flash has non-standard addresses for buffered - write commands. - -- CONFIG_SYS_FLASH_QUIET_TEST - If this option is defined, the common CFI flash doesn't - print it's warning upon not recognized FLASH banks. This - is useful, if some of the configured banks are only - optionally available. - -- CONFIG_FLASH_SHOW_PROGRESS - If defined (must be an integer), print out countdown - digits and dots. Recommended value: 45 (9..1) for 80 - column displays, 15 (3..1) for 40 column displays. - -- CONFIG_SYS_RX_ETH_BUFFER: - Defines the number of Ethernet receive buffers. On some - Ethernet controllers it is recommended to set this value - to 8 or even higher (EEPRO100 or 405 EMAC), since all - buffers can be full shortly after enabling the interface - on high Ethernet traffic. - Defaults to 4 if not defined. - -The following definitions that deal with the placement and management -of environment data (variable area); in general, we support the -following configurations: - -- CONFIG_ENV_IS_IN_FLASH: - - Define this if the environment is in flash memory. - - a) The environment occupies one whole flash sector, which is - "embedded" in the text segment with the U-Boot code. This - happens usually with "bottom boot sector" or "top boot - sector" type flash chips, which have several smaller - sectors at the start or the end. For instance, such a - layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In - such a case you would place the environment in one of the - 4 kB sectors - with U-Boot code before and after it. With - "top boot sector" type flash chips, you would put the - environment in one of the last sectors, leaving a gap - between U-Boot and the environment. - - - CONFIG_ENV_OFFSET: - - Offset of environment data (variable area) to the - beginning of flash memory; for instance, with bottom boot - type flash chips the second sector can be used: the offset - for this sector is given here. - - CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. - - - CONFIG_ENV_ADDR: - - This is just another way to specify the start address of - the flash sector containing the environment (instead of - CONFIG_ENV_OFFSET). - - - CONFIG_ENV_SECT_SIZE: - - Size of the sector containing the environment. - - - b) Sometimes flash chips have few, equal sized, BIG sectors. - In such a case you don't want to spend a whole sector for - the environment. - - - CONFIG_ENV_SIZE: - - If you use this in combination with CONFIG_ENV_IS_IN_FLASH - and CONFIG_ENV_SECT_SIZE, you can specify to use only a part - of this flash sector for the environment. This saves - memory for the RAM copy of the environment. - - It may also save flash memory if you decide to use this - when your environment is "embedded" within U-Boot code, - since then the remainder of the flash sector could be used - for U-Boot code. It should be pointed out that this is - STRONGLY DISCOURAGED from a robustness point of view: - updating the environment in flash makes it always - necessary to erase the WHOLE sector. If something goes - wrong before the contents has been restored from a copy in - RAM, your target system will be dead. - - - CONFIG_ENV_ADDR_REDUND - CONFIG_ENV_SIZE_REDUND - - These settings describe a second storage area used to hold - a redundant copy of the environment data, so that there is - a valid backup copy in case there is a power failure during - a "saveenv" operation. - -BE CAREFUL! Any changes to the flash layout, and some changes to the -source code will make it necessary to adapt <board>/u-boot.lds* -accordingly! - - -- CONFIG_ENV_IS_IN_NVRAM: - - Define this if you have some non-volatile memory device - (NVRAM, battery buffered SRAM) which you want to use for the - environment. - - - CONFIG_ENV_ADDR: - - CONFIG_ENV_SIZE: - - These two #defines are used to determine the memory area you - want to use for environment. It is assumed that this memory - can just be read and written to, without any special - provision. - -BE CAREFUL! The first access to the environment happens quite early -in U-Boot initalization (when we try to get the setting of for the -console baudrate). You *MUST* have mapped your NVRAM area then, or -U-Boot will hang. - -Please note that even with NVRAM we still use a copy of the -environment in RAM: we could work on NVRAM directly, but we want to -keep settings there always unmodified except somebody uses "saveenv" -to save the current settings. - - -- CONFIG_ENV_IS_IN_EEPROM: - - Use this if you have an EEPROM or similar serial access - device and a driver for it. - - - CONFIG_ENV_OFFSET: - - CONFIG_ENV_SIZE: - - These two #defines specify the offset and size of the - environment area within the total memory of your EEPROM. - - - CONFIG_SYS_I2C_EEPROM_ADDR: - If defined, specified the chip address of the EEPROM device. - The default address is zero. - - - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: - If defined, the number of bits used to address bytes in a - single page in the EEPROM device. A 64 byte page, for example - would require six bits. - - - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: - If defined, the number of milliseconds to delay between - page writes. The default is zero milliseconds. - - - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: - The length in bytes of the EEPROM memory array address. Note - that this is NOT the chip address length! - - - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: - EEPROM chips that implement "address overflow" are ones - like Catalyst 24WC04/08/16 which has 9/10/11 bits of - address and the extra bits end up in the "chip address" bit - slots. This makes a 24WC08 (1Kbyte) chip look like four 256 - byte chips. - - Note that we consider the length of the address field to - still be one byte because the extra address bits are hidden - in the chip address. - - - CONFIG_SYS_EEPROM_SIZE: - The size in bytes of the EEPROM device. - - - CONFIG_ENV_EEPROM_IS_ON_I2C - define this, if you have I2C and SPI activated, and your - EEPROM, which holds the environment, is on the I2C bus. - - - CONFIG_I2C_ENV_EEPROM_BUS - if you have an Environment on an EEPROM reached over - I2C muxes, you can define here, how to reach this - EEPROM. For example: - - #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" - - EEPROM which holds the environment, is reached over - a pca9547 i2c mux with address 0x70, channel 3. - -- CONFIG_ENV_IS_IN_DATAFLASH: - - Define this if you have a DataFlash memory device which you - want to use for the environment. - - - CONFIG_ENV_OFFSET: - - CONFIG_ENV_ADDR: - - CONFIG_ENV_SIZE: - - These three #defines specify the offset and size of the - environment area within the total memory of your DataFlash placed - at the specified address. - -- CONFIG_ENV_IS_IN_NAND: - - Define this if you have a NAND device which you want to use - for the environment. - - - CONFIG_ENV_OFFSET: - - CONFIG_ENV_SIZE: - - These two #defines specify the offset and size of the environment - area within the first NAND device. - - - CONFIG_ENV_OFFSET_REDUND - - This setting describes a second storage area of CONFIG_ENV_SIZE - size used to hold a redundant copy of the environment data, - so that there is a valid backup copy in case there is a - power failure during a "saveenv" operation. - - Note: CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND must be aligned - to a block boundary, and CONFIG_ENV_SIZE must be a multiple of - the NAND devices block size. - -- CONFIG_NAND_ENV_DST - - Defines address in RAM to which the nand_spl code should copy the - environment. If redundant environment is used, it will be copied to - CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. - -- CONFIG_SYS_SPI_INIT_OFFSET - - Defines offset to the initial SPI buffer area in DPRAM. The - area is used at an early stage (ROM part) if the environment - is configured to reside in the SPI EEPROM: We need a 520 byte - scratch DPRAM area. It is used between the two initialization - calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems - to be a good choice since it makes it far enough from the - start of the data area as well as from the stack pointer. - -Please note that the environment is read-only until the monitor -has been relocated to RAM and a RAM copy of the environment has been -created; also, when using EEPROM you will have to use getenv_r() -until then to read environment variables. - -The environment is protected by a CRC32 checksum. Before the monitor -is relocated into RAM, as a result of a bad CRC you will be working -with the compiled-in default environment - *silently*!!! [This is -necessary, because the first environment variable we need is the -"baudrate" setting for the console - if we have a bad CRC, we don't -have any device yet where we could complain.] - -Note: once the monitor has been relocated, then it will complain if -the default environment is used; a new CRC is computed as soon as you -use the "saveenv" command to store a valid environment. - -- CONFIG_SYS_FAULT_ECHO_LINK_DOWN: - Echo the inverted Ethernet link state to the fault LED. - - Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR - also needs to be defined. - -- CONFIG_SYS_FAULT_MII_ADDR: - MII address of the PHY to check for the Ethernet link state. - -- CONFIG_NS16550_MIN_FUNCTIONS: - Define this if you desire to only have use of the NS16550_init - and NS16550_putc functions for the serial driver located at - drivers/serial/ns16550.c. This option is useful for saving - space for already greatly restricted images, including but not - limited to NAND_SPL configurations. - -Low Level (hardware related) configuration options: ---------------------------------------------------- - -- CONFIG_SYS_CACHELINE_SIZE: - Cache Line Size of the CPU. - -- CONFIG_SYS_DEFAULT_IMMR: - Default address of the IMMR after system reset. - - Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, - and RPXsuper) to be able to adjust the position of - the IMMR register after a reset. - -- Floppy Disk Support: - CONFIG_SYS_FDC_DRIVE_NUMBER - - the default drive number (default value 0) - - CONFIG_SYS_ISA_IO_STRIDE - - defines the spacing between FDC chipset registers - (default value 1) - - CONFIG_SYS_ISA_IO_OFFSET - - defines the offset of register from address. It - depends on which part of the data bus is connected to - the FDC chipset. (default value 0) - - If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and - CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their - default value. - - if CONFIG_SYS_FDC_HW_INIT is defined, then the function - fdc_hw_init() is called at the beginning of the FDC - setup. fdc_hw_init() must be provided by the board - source code. It is used to make hardware dependant - initializations. - -- CONFIG_SYS_IMMR: Physical address of the Internal Memory. - DO NOT CHANGE unless you know exactly what you're - doing! (11-4) [MPC8xx/82xx systems only] - -- CONFIG_SYS_INIT_RAM_ADDR: - - Start address of memory area that can be used for - initial data and stack; please note that this must be - writable memory that is working WITHOUT special - initialization, i. e. you CANNOT use normal RAM which - will become available only after programming the - memory controller and running certain initialization - sequences. - - U-Boot uses the following memory types: - - MPC8xx and MPC8260: IMMR (internal memory of the CPU) - - MPC824X: data cache - - PPC4xx: data cache - -- CONFIG_SYS_GBL_DATA_OFFSET: - - Offset of the initial data structure in the memory - area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually - CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial - data is located at the end of the available space - (sometimes written as (CONFIG_SYS_INIT_RAM_END - - CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just - below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + - CONFIG_SYS_GBL_DATA_OFFSET) downward. - - Note: - On the MPC824X (or other systems that use the data - cache for initial memory) the address chosen for - CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must - point to an otherwise UNUSED address space between - the top of RAM and the start of the PCI space. - -- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6) - -- CONFIG_SYS_SYPCR: System Protection Control (11-9) - -- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26) - -- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31) - -- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) - -- CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) - -- CONFIG_SYS_OR_TIMING_SDRAM: - SDRAM timing - -- CONFIG_SYS_MAMR_PTA: - periodic timer for refresh - -- CONFIG_SYS_DER: Debug Event Register (37-47) - -- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, - CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, - CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, - CONFIG_SYS_BR1_PRELIM: - Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) - -- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, - CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM, - CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: - Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) - -- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K, - CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL: - Machine Mode Register and Memory Periodic Timer - Prescaler definitions (SDRAM timing) - -- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]: - enable I2C microcode relocation patch (MPC8xx); - define relocation offset in DPRAM [DSP2] - -- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]: - enable SMC microcode relocation patch (MPC8xx); - define relocation offset in DPRAM [SMC1] - -- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]: - enable SPI microcode relocation patch (MPC8xx); - define relocation offset in DPRAM [SCC4] - -- CONFIG_SYS_USE_OSCCLK: - Use OSCM clock mode on MBX8xx board. Be careful, - wrong setting might damage your board. Read - doc/README.MBX before setting this variable! - -- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) - Offset of the bootmode word in DPRAM used by post - (Power On Self Tests). This definition overrides - #define'd default value in commproc.h resp. - cpm_8260.h. - -- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB, - CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL, - CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS, - CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB, - CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, - CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, - CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, - CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) - Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set. - -- CONFIG_PCI_DISABLE_PCIE: - Disable PCI-Express on systems where it is supported but not - required. - -- CONFIG_SPD_EEPROM - Get DDR timing information from an I2C EEPROM. Common - with pluggable memory modules such as SODIMMs - - SPD_EEPROM_ADDRESS - I2C address of the SPD EEPROM - -- CONFIG_SYS_SPD_BUS_NUM - If SPD EEPROM is on an I2C bus other than the first - one, specify here. Note that the value must resolve - to something your driver can deal with. - -- CONFIG_SYS_83XX_DDR_USES_CS0 - Only for 83xx systems. If specified, then DDR should - be configured using CS0 and CS1 instead of CS2 and CS3. - -- CONFIG_ETHER_ON_FEC[12] - Define to enable FEC[12] on a 8xx series processor. - -- CONFIG_FEC[12]_PHY - Define to the hardcoded PHY address which corresponds - to the given FEC; i. e. - #define CONFIG_FEC1_PHY 4 - means that the PHY with address 4 is connected to FEC1 - - When set to -1, means to probe for first available. - -- CONFIG_FEC[12]_PHY_NORXERR - The PHY does not have a RXERR line (RMII only). - (so program the FEC to ignore it). - -- CONFIG_RMII - Enable RMII mode for all FECs. - Note that this is a global option, we can't - have one FEC in standard MII mode and another in RMII mode. - -- CONFIG_CRC32_VERIFY - Add a verify option to the crc32 command. - The syntax is: - - => crc32 -v <address> <count> <crc32> - - Where address/count indicate a memory area - and crc32 is the correct crc32 which the - area should have. - -- CONFIG_LOOPW - Add the "loopw" memory command. This only takes effect if - the memory commands are activated globally (CONFIG_CMD_MEM). - -- CONFIG_MX_CYCLIC - Add the "mdc" and "mwc" memory commands. These are cyclic - "md/mw" commands. - Examples: - - => mdc.b 10 4 500 - This command will print 4 bytes (10,11,12,13) each 500 ms. - - => mwc.l 100 12345678 10 - This command will write 12345678 to address 100 all 10 ms. - - This only takes effect if the memory commands are activated - globally (CONFIG_CMD_MEM). - -- CONFIG_SKIP_LOWLEVEL_INIT -- CONFIG_SKIP_RELOCATE_UBOOT - - [ARM only] If these variables are defined, then - certain low level initializations (like setting up - the memory controller) are omitted and/or U-Boot does - not relocate itself into RAM. - Normally these variables MUST NOT be defined. The - only exception is when U-Boot is loaded (to RAM) by - some other boot loader or by a debugger which - performs these initializations itself. - -- CONFIG_PRELOADER - - Modifies the behaviour of start.S when compiling a loader - that is executed before the actual U-Boot. E.g. when - compiling a NAND SPL. - -Building the Software: -====================== - -Building U-Boot has been tested in several native build environments -and in many different cross environments. Of course we cannot support -all possibly existing versions of cross development tools in all -(potentially obsolete) versions. In case of tool chain problems we -recommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) -which is extensively used to build and test U-Boot. - -If you are not using a native environment, it is assumed that you -have GNU cross compiling tools available in your path. In this case, -you must set the environment variable CROSS_COMPILE in your shell. -Note that no changes to the Makefile or any other source files are -necessary. For example using the ELDK on a 4xx CPU, please enter: - - $ CROSS_COMPILE=ppc_4xx- - $ export CROSS_COMPILE - -Note: If you wish to generate Windows versions of the utilities in - the tools directory you can use the MinGW toolchain - (http://www.mingw.org). Set your HOST tools to the MinGW - toolchain and execute 'make tools'. For example: - - $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools - - Binaries such as tools/mkimage.exe will be created which can - be executed on computers running Windows. - -U-Boot is intended to be simple to build. After installing the -sources you must configure U-Boot for one specific board type. This -is done by typing: - - make NAME_config - -where "NAME_config" is the name of one of the existing configu- -rations; see the main Makefile for supported names. - -Note: for some board special configuration names may exist; check if - additional information is available from the board vendor; for - instance, the TQM823L systems are available without (standard) - or with LCD support. You can select such additional "features" - when choosing the configuration, i. e. - - make TQM823L_config - - will configure for a plain TQM823L, i. e. no LCD support - - make TQM823L_LCD_config - - will configure for a TQM823L with U-Boot console on LCD - - etc. - - -Finally, type "make all", and you should get some working U-Boot -images ready for download to / installation on your system: - -- "u-boot.bin" is a raw binary image -- "u-boot" is an image in ELF binary format -- "u-boot.srec" is in Motorola S-Record format - -By default the build is performed locally and the objects are saved -in the source directory. One of the two methods can be used to change -this behavior and build U-Boot to some external directory: - -1. Add O= to the make command line invocations: - - make O=/tmp/build distclean - make O=/tmp/build NAME_config - make O=/tmp/build all - -2. Set environment variable BUILD_DIR to point to the desired location: - - export BUILD_DIR=/tmp/build - make distclean - make NAME_config - make all - -Note that the command line "O=" setting overrides the BUILD_DIR environment -variable. - - -Please be aware that the Makefiles assume you are using GNU make, so -for instance on NetBSD you might need to use "gmake" instead of -native "make". - - -If the system board that you have is not listed, then you will need -to port U-Boot to your hardware platform. To do this, follow these -steps: - -1. Add a new configuration option for your board to the toplevel - "Makefile" and to the "MAKEALL" script, using the existing - entries as examples. Note that here and at many other places - boards and other names are listed in alphabetical sort order. Please - keep this order. -2. Create a new directory to hold your board specific code. Add any - files you need. In your board directory, you will need at least - the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". -3. Create a new configuration file "include/configs/<board>.h" for - your board -3. If you're porting U-Boot to a new CPU, then also create a new - directory to hold your CPU specific code. Add any files you need. -4. Run "make <board>_config" with your new name. -5. Type "make", and you should get a working "u-boot.srec" file - to be installed on your target system. -6. Debug and solve any problems that might arise. - [Of course, this last step is much harder than it sounds.] - - -Testing of U-Boot Modifications, Ports to New Hardware, etc.: -============================================================== - -If you have modified U-Boot sources (for instance added a new board -or support for new devices, a new CPU, etc.) you are expected to -provide feedback to the other developers. The feedback normally takes -the form of a "patch", i. e. a context diff against a certain (latest -official or latest in the git repository) version of U-Boot sources. - -But before you submit such a patch, please verify that your modifi- -cation did not break existing code. At least make sure that *ALL* of -the supported boards compile WITHOUT ANY compiler warnings. To do so, -just run the "MAKEALL" script, which will configure and build U-Boot -for ALL supported system. Be warned, this will take a while. You can -select which (cross) compiler to use by passing a `CROSS_COMPILE' -environment variable to the script, i. e. to use the ELDK cross tools -you can type - - CROSS_COMPILE=ppc_8xx- MAKEALL - -or to build on a native PowerPC system you can type - - CROSS_COMPILE=' ' MAKEALL - -When using the MAKEALL script, the default behaviour is to build -U-Boot in the source directory. This location can be changed by -setting the BUILD_DIR environment variable. Also, for each target -built, the MAKEALL script saves two log files (<target>.ERR and -<target>.MAKEALL) in the <source dir>/LOG directory. This default -location can be changed by setting the MAKEALL_LOGDIR environment -variable. For example: - - export BUILD_DIR=/tmp/build - export MAKEALL_LOGDIR=/tmp/log - CROSS_COMPILE=ppc_8xx- MAKEALL - -With the above settings build objects are saved in the /tmp/build, -log files are saved in the /tmp/log and the source tree remains clean -during the whole build process. - - -See also "U-Boot Porting Guide" below. - - -Monitor Commands - Overview: -============================ - -go - start application at address 'addr' -run - run commands in an environment variable -bootm - boot application image from memory -bootp - boot image via network using BootP/TFTP protocol -tftpboot- boot image via network using TFTP protocol - and env variables "ipaddr" and "serverip" - (and eventually "gatewayip") -rarpboot- boot image via network using RARP/TFTP protocol -diskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' -loads - load S-Record file over serial line -loadb - load binary file over serial line (kermit mode) -md - memory display -mm - memory modify (auto-incrementing) -nm - memory modify (constant address) -mw - memory write (fill) -cp - memory copy -cmp - memory compare -crc32 - checksum calculation -i2c - I2C sub-system -sspi - SPI utility commands -base - print or set address offset -printenv- print environment variables -setenv - set environment variables -saveenv - save environment variables to persistent storage -protect - enable or disable FLASH write protection -erase - erase FLASH memory -flinfo - print FLASH memory information -bdinfo - print Board Info structure -iminfo - print header information for application image -coninfo - print console devices and informations -ide - IDE sub-system -loop - infinite loop on address range -loopw - infinite write loop on address range -mtest - simple RAM test -icache - enable or disable instruction cache -dcache - enable or disable data cache -reset - Perform RESET of the CPU -echo - echo args to console -version - print monitor version -help - print online help -? - alias for 'help' - - -Monitor Commands - Detailed Description: -======================================== - -TODO. - -For now: just type "help <command>". - - -Environment Variables: -====================== - -U-Boot supports user configuration using Environment Variables which -can be made persistent by saving to Flash memory. - -Environment Variables are set using "setenv", printed using -"printenv", and saved to Flash using "saveenv". Using "setenv" -without a value can be used to delete a variable from the -environment. As long as you don't save the environment you are -working with an in-memory copy. In case the Flash area containing the -environment is erased by accident, a default environment is provided. - -Some configuration options can be set using Environment Variables. - -List of environment variables (most likely not complete): - - baudrate - see CONFIG_BAUDRATE - - bootdelay - see CONFIG_BOOTDELAY - - bootcmd - see CONFIG_BOOTCOMMAND - - bootargs - Boot arguments when booting an RTOS image - - bootfile - Name of the image to load with TFTP - - bootm_low - Memory range available for image processing in the bootm - command can be restricted. This variable is given as - a hexadecimal number and defines lowest address allowed - for use by the bootm command. See also "bootm_size" - environment variable. Address defined by "bootm_low" is - also the base of the initial memory mapping for the Linux - kernel -- see the description of CONFIG_SYS_BOOTMAPSZ. - - bootm_size - Memory range available for image processing in the bootm - command can be restricted. This variable is given as - a hexadecimal number and defines the size of the region - allowed for use by the bootm command. See also "bootm_low" - environment variable. - - updatefile - Location of the software update file on a TFTP server, used - by the automatic software update feature. Please refer to - documentation in doc/README.update for more details. - - autoload - if set to "no" (any string beginning with 'n'), - "bootp" will just load perform a lookup of the - configuration from the BOOTP server, but not try to - load any image using TFTP - - autostart - if set to "yes", an image loaded using the "bootp", - "rarpboot", "tftpboot" or "diskboot" commands will - be automatically started (by internally calling - "bootm") - - If set to "no", a standalone image passed to the - "bootm" command will be copied to the load address - (and eventually uncompressed), but NOT be started. - This can be used to load and uncompress arbitrary - data. - - i2cfast - (PPC405GP|PPC405EP only) - if set to 'y' configures Linux I2C driver for fast - mode (400kHZ). This environment variable is used in - initialization code. So, for changes to be effective - it must be saved and board must be reset. - - initrd_high - restrict positioning of initrd images: - If this variable is not set, initrd images will be - copied to the highest possible address in RAM; this - is usually what you want since it allows for - maximum initrd size. If for some reason you want to - make sure that the initrd image is loaded below the - CONFIG_SYS_BOOTMAPSZ limit, you can set this environment - variable to a value of "no" or "off" or "0". - Alternatively, you can set it to a maximum upper - address to use (U-Boot will still check that it - does not overwrite the U-Boot stack and data). - - For instance, when you have a system with 16 MB - RAM, and want to reserve 4 MB from use by Linux, - you can do this by adding "mem=12M" to the value of - the "bootargs" variable. However, now you must make - sure that the initrd image is placed in the first - 12 MB as well - this can be done with - - setenv initrd_high 00c00000 - - If you set initrd_high to 0xFFFFFFFF, this is an - indication to U-Boot that all addresses are legal - for the Linux kernel, including addresses in flash - memory. In this case U-Boot will NOT COPY the - ramdisk at all. This may be useful to reduce the - boot time on your system, but requires that this - feature is supported by your Linux kernel. - - ipaddr - IP address; needed for tftpboot command - - loadaddr - Default load address for commands like "bootp", - "rarpboot", "tftpboot", "loadb" or "diskboot" - - loads_echo - see CONFIG_LOADS_ECHO - - serverip - TFTP server IP address; needed for tftpboot command - - bootretry - see CONFIG_BOOT_RETRY_TIME - - bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR - - bootstopkey - see CONFIG_AUTOBOOT_STOP_STR - - ethprime - When CONFIG_NET_MULTI is enabled controls which - interface is used first. - - ethact - When CONFIG_NET_MULTI is enabled controls which - interface is currently active. For example you - can do the following - - => setenv ethact FEC ETHERNET - => ping 192.168.0.1 # traffic sent on FEC ETHERNET - => setenv ethact SCC ETHERNET - => ping 10.0.0.1 # traffic sent on SCC ETHERNET - - ethrotate - When set to "no" U-Boot does not go through all - available network interfaces. - It just stays at the currently selected interface. - - netretry - When set to "no" each network operation will - either succeed or fail without retrying. - When set to "once" the network operation will - fail when all the available network interfaces - are tried once without success. - Useful on scripts which control the retry operation - themselves. - - npe_ucode - set load address for the NPE microcode - - tftpsrcport - If this is set, the value is used for TFTP's - UDP source port. - - tftpdstport - If this is set, the value is used for TFTP's UDP - destination port instead of the Well Know Port 69. - - tftpblocksize - Block size to use for TFTP transfers; if not set, - we use the TFTP server's default block size - - tftptimeout - Retransmission timeout for TFTP packets (in milli- - seconds, minimum value is 1000 = 1 second). Defines - when a packet is considered to be lost so it has to - be retransmitted. The default is 5000 = 5 seconds. - Lowering this value may make downloads succeed - faster in networks with high packet loss rates or - with unreliable TFTP servers. - - vlan - When set to a value < 4095 the traffic over - Ethernet is encapsulated/received over 802.1q - VLAN tagged frames. - -The following environment variables may be used and automatically -updated by the network boot commands ("bootp" and "rarpboot"), -depending the information provided by your boot server: - - bootfile - see above - dnsip - IP address of your Domain Name Server - dnsip2 - IP address of your secondary Domain Name Server - gatewayip - IP address of the Gateway (Router) to use - hostname - Target hostname - ipaddr - see above - netmask - Subnet Mask - rootpath - Pathname of the root filesystem on the NFS server - serverip - see above - - -There are two special Environment Variables: - - serial# - contains hardware identification information such - as type string and/or serial number - ethaddr - Ethernet address - -These variables can be set only once (usually during manufacturing of -the board). U-Boot refuses to delete or overwrite these variables -once they have been set once. - - -Further special Environment Variables: - - ver - Contains the U-Boot version string as printed - with the "version" command. This variable is - readonly (see CONFIG_VERSION_VARIABLE). - - -Please note that changes to some configuration parameters may take -only effect after the next boot (yes, that's just like Windoze :-). - - -Command Line Parsing: -===================== - -There are two different command line parsers available with U-Boot: -the old "simple" one, and the much more powerful "hush" shell: - -Old, simple command line parser: --------------------------------- - -- supports environment variables (through setenv / saveenv commands) -- several commands on one line, separated by ';' -- variable substitution using "... ${name} ..." syntax -- special characters ('$', ';') can be escaped by prefixing with '\', - for example: - setenv bootcmd bootm \${address} -- You can also escape text by enclosing in single apostrophes, for example: - setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' - -Hush shell: ------------ - -- similar to Bourne shell, with control structures like - if...then...else...fi, for...do...done; while...do...done, - until...do...done, ... -- supports environment ("global") variables (through setenv / saveenv - commands) and local shell variables (through standard shell syntax - "name=value"); only environment variables can be used with "run" - command - -General rules: --------------- - -(1) If a command line (or an environment variable executed by a "run" - command) contains several commands separated by semicolon, and - one of these commands fails, then the remaining commands will be - executed anyway. - -(2) If you execute several variables with one call to run (i. e. - calling run with a list of variables as arguments), any failing - command will cause "run" to terminate, i. e. the remaining - variables are not executed. - -Note for Redundant Ethernet Interfaces: -======================================= - -Some boards come with redundant Ethernet interfaces; U-Boot supports -such configurations and is capable of automatic selection of a -"working" interface when needed. MAC assignment works as follows: - -Network interfaces are numbered eth0, eth1, eth2, ... Corresponding -MAC addresses can be stored in the environment as "ethaddr" (=>eth0), -"eth1addr" (=>eth1), "eth2addr", ... - -If the network interface stores some valid MAC address (for instance -in SROM), this is used as default address if there is NO correspon- -ding setting in the environment; if the corresponding environment -variable is set, this overrides the settings in the card; that means: - -o If the SROM has a valid MAC address, and there is no address in the - environment, the SROM's address is used. - -o If there is no valid address in the SROM, and a definition in the - environment exists, then the value from the environment variable is - used. - -o If both the SROM and the environment contain a MAC address, and - both addresses are the same, this MAC address is used. - -o If both the SROM and the environment contain a MAC address, and the - addresses differ, the value from the environment is used and a - warning is printed. - -o If neither SROM nor the environment contain a MAC address, an error - is raised. - -If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses -will be programmed into hardware as part of the initialization process. This -may be skipped by setting the appropriate 'ethmacskip' environment variable. -The naming convention is as follows: -"ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc. - -Image Formats: -============== - -U-Boot is capable of booting (and performing other auxiliary operations on) -images in two formats: - -New uImage format (FIT) ------------------------ - -Flexible and powerful format based on Flattened Image Tree -- FIT (similar -to Flattened Device Tree). It allows the use of images with multiple -components (several kernels, ramdisks, etc.), with contents protected by -SHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory. - - -Old uImage format ------------------ - -Old image format is based on binary files which can be basically anything, -preceded by a special header; see the definitions in include/image.h for -details; basically, the header defines the following image properties: - -* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, - 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, - LynxOS, pSOS, QNX, RTEMS, INTEGRITY; - Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, - INTEGRITY). -* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, - IA64, MIPS, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; - Currently supported: ARM, AVR32, Intel x86, MIPS, Nios II, PowerPC). -* Compression Type (uncompressed, gzip, bzip2) -* Load Address -* Entry Point -* Image Name -* Image Timestamp - -The header is marked by a special Magic Number, and both the header -and the data portions of the image are secured against corruption by -CRC32 checksums. - - -Linux Support: -============== - -Although U-Boot should support any OS or standalone application -easily, the main focus has always been on Linux during the design of -U-Boot. - -U-Boot includes many features that so far have been part of some -special "boot loader" code within the Linux kernel. Also, any -"initrd" images to be used are no longer part of one big Linux image; -instead, kernel and "initrd" are separate images. This implementation -serves several purposes: - -- the same features can be used for other OS or standalone - applications (for instance: using compressed images to reduce the - Flash memory footprint) - -- it becomes much easier to port new Linux kernel versions because - lots of low-level, hardware dependent stuff are done by U-Boot - -- the same Linux kernel image can now be used with different "initrd" - images; of course this also means that different kernel images can - be run with the same "initrd". This makes testing easier (you don't - have to build a new "zImage.initrd" Linux image when you just - change a file in your "initrd"). Also, a field-upgrade of the - software is easier now. - - -Linux HOWTO: -============ - -Porting Linux to U-Boot based systems: ---------------------------------------- - -U-Boot cannot save you from doing all the necessary modifications to -configure the Linux device drivers for use with your target hardware -(no, we don't intend to provide a full virtual machine interface to -Linux :-). - -But now you can ignore ALL boot loader code (in arch/powerpc/mbxboot). - -Just make sure your machine specific header file (for instance -include/asm-ppc/tqm8xx.h) includes the same definition of the Board -Information structure as we define in include/asm-<arch>/u-boot.h, -and make sure that your definition of IMAP_ADDR uses the same value -as your U-Boot configuration in CONFIG_SYS_IMMR. - - -Configuring the Linux kernel: ------------------------------ - -No specific requirements for U-Boot. Make sure you have some root -device (initial ramdisk, NFS) for your target system. - - -Building a Linux Image: ------------------------ - -With U-Boot, "normal" build targets like "zImage" or "bzImage" are -not used. If you use recent kernel source, a new build target -"uImage" will exist which automatically builds an image usable by -U-Boot. Most older kernels also have support for a "pImage" target, -which was introduced for our predecessor project PPCBoot and uses a -100% compatible format. - -Example: - - make TQM850L_config - make oldconfig - make dep - make uImage - -The "uImage" build target uses a special tool (in 'tools/mkimage') to -encapsulate a compressed Linux kernel image with header information, -CRC32 checksum etc. for use with U-Boot. This is what we are doing: - -* build a standard "vmlinux" kernel image (in ELF binary format): - -* convert the kernel into a raw binary image: - - ${CROSS_COMPILE}-objcopy -O binary \ - -R .note -R .comment \ - -S vmlinux linux.bin - -* compress the binary image: - - gzip -9 linux.bin - -* package compressed binary image for U-Boot: - - mkimage -A ppc -O linux -T kernel -C gzip \ - -a 0 -e 0 -n "Linux Kernel Image" \ - -d linux.bin.gz uImage - - -The "mkimage" tool can also be used to create ramdisk images for use -with U-Boot, either separated from the Linux kernel image, or -combined into one file. "mkimage" encapsulates the images with a 64 -byte header containing information about target architecture, -operating system, image type, compression method, entry points, time -stamp, CRC32 checksums, etc. - -"mkimage" can be called in two ways: to verify existing images and -print the header information, or to build new images. - -In the first form (with "-l" option) mkimage lists the information -contained in the header of an existing U-Boot image; this includes -checksum verification: - - tools/mkimage -l image - -l ==> list image header information - -The second form (with "-d" option) is used to build a U-Boot image -from a "data file" which is used as image payload: - - tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \ - -n name -d data_file image - -A ==> set architecture to 'arch' - -O ==> set operating system to 'os' - -T ==> set image type to 'type' - -C ==> set compression type 'comp' - -a ==> set load address to 'addr' (hex) - -e ==> set entry point to 'ep' (hex) - -n ==> set image name to 'name' - -d ==> use image data from 'datafile' - -Right now, all Linux kernels for PowerPC systems use the same load -address (0x00000000), but the entry point address depends on the -kernel version: - -- 2.2.x kernels have the entry point at 0x0000000C, -- 2.3.x and later kernels have the entry point at 0x00000000. - -So a typical call to build a U-Boot image would read: - - -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ - > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \ - > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \ - > examples/uImage.TQM850L - Image Name: 2.4.4 kernel for TQM850L - Created: Wed Jul 19 02:34:59 2000 - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 335725 Bytes = 327.86 kB = 0.32 MB - Load Address: 0x00000000 - Entry Point: 0x00000000 - -To verify the contents of the image (or check for corruption): - - -> tools/mkimage -l examples/uImage.TQM850L - Image Name: 2.4.4 kernel for TQM850L - Created: Wed Jul 19 02:34:59 2000 - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 335725 Bytes = 327.86 kB = 0.32 MB - Load Address: 0x00000000 - Entry Point: 0x00000000 - -NOTE: for embedded systems where boot time is critical you can trade -speed for memory and install an UNCOMPRESSED image instead: this -needs more space in Flash, but boots much faster since it does not -need to be uncompressed: - - -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz - -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ - > -A ppc -O linux -T kernel -C none -a 0 -e 0 \ - > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \ - > examples/uImage.TQM850L-uncompressed - Image Name: 2.4.4 kernel for TQM850L - Created: Wed Jul 19 02:34:59 2000 - Image Type: PowerPC Linux Kernel Image (uncompressed) - Data Size: 792160 Bytes = 773.59 kB = 0.76 MB - Load Address: 0x00000000 - Entry Point: 0x00000000 - - -Similar you can build U-Boot images from a 'ramdisk.image.gz' file -when your kernel is intended to use an initial ramdisk: - - -> tools/mkimage -n 'Simple Ramdisk Image' \ - > -A ppc -O linux -T ramdisk -C gzip \ - > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd - Image Name: Simple Ramdisk Image - Created: Wed Jan 12 14:01:50 2000 - Image Type: PowerPC Linux RAMDisk Image (gzip compressed) - Data Size: 566530 Bytes = 553.25 kB = 0.54 MB - Load Address: 0x00000000 - Entry Point: 0x00000000 - - -Installing a Linux Image: -------------------------- - -To downloading a U-Boot image over the serial (console) interface, -you must convert the image to S-Record format: - - objcopy -I binary -O srec examples/image examples/image.srec - -The 'objcopy' does not understand the information in the U-Boot -image header, so the resulting S-Record file will be relative to -address 0x00000000. To load it to a given address, you need to -specify the target address as 'offset' parameter with the 'loads' -command. - -Example: install the image to address 0x40100000 (which on the -TQM8xxL is in the first Flash bank): - - => erase 40100000 401FFFFF - - .......... done - Erased 8 sectors - - => loads 40100000 - ## Ready for S-Record download ... - ~>examples/image.srec - 1 2 3 4 5 6 7 8 9 10 11 12 13 ... - ... - 15989 15990 15991 15992 - [file transfer complete] - [connected] - ## Start Addr = 0x00000000 - - -You can check the success of the download using the 'iminfo' command; -this includes a checksum verification so you can be sure no data -corruption happened: - - => imi 40100000 - - ## Checking Image at 40100000 ... - Image Name: 2.2.13 for initrd on TQM850L - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 335725 Bytes = 327 kB = 0 MB - Load Address: 00000000 - Entry Point: 0000000c - Verifying Checksum ... OK - - -Boot Linux: ------------ - -The "bootm" command is used to boot an application that is stored in -memory (RAM or Flash). In case of a Linux kernel image, the contents -of the "bootargs" environment variable is passed to the kernel as -parameters. You can check and modify this variable using the -"printenv" and "setenv" commands: - - - => printenv bootargs - bootargs=root=/dev/ram - - => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 - - => printenv bootargs - bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 - - => bootm 40020000 - ## Booting Linux kernel at 40020000 ... - Image Name: 2.2.13 for NFS on TQM850L - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 381681 Bytes = 372 kB = 0 MB - Load Address: 00000000 - Entry Point: 0000000c - Verifying Checksum ... OK - Uncompressing Kernel Image ... OK - Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000 - Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 - time_init: decrementer frequency = 187500000/60 - Calibrating delay loop... 49.77 BogoMIPS - Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000] - ... - -If you want to boot a Linux kernel with initial RAM disk, you pass -the memory addresses of both the kernel and the initrd image (PPBCOOT -format!) to the "bootm" command: - - => imi 40100000 40200000 - - ## Checking Image at 40100000 ... - Image Name: 2.2.13 for initrd on TQM850L - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 335725 Bytes = 327 kB = 0 MB - Load Address: 00000000 - Entry Point: 0000000c - Verifying Checksum ... OK - - ## Checking Image at 40200000 ... - Image Name: Simple Ramdisk Image - Image Type: PowerPC Linux RAMDisk Image (gzip compressed) - Data Size: 566530 Bytes = 553 kB = 0 MB - Load Address: 00000000 - Entry Point: 00000000 - Verifying Checksum ... OK - - => bootm 40100000 40200000 - ## Booting Linux kernel at 40100000 ... - Image Name: 2.2.13 for initrd on TQM850L - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 335725 Bytes = 327 kB = 0 MB - Load Address: 00000000 - Entry Point: 0000000c - Verifying Checksum ... OK - Uncompressing Kernel Image ... OK - ## Loading RAMDisk Image at 40200000 ... - Image Name: Simple Ramdisk Image - Image Type: PowerPC Linux RAMDisk Image (gzip compressed) - Data Size: 566530 Bytes = 553 kB = 0 MB - Load Address: 00000000 - Entry Point: 00000000 - Verifying Checksum ... OK - Loading Ramdisk ... OK - Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000 - Boot arguments: root=/dev/ram - time_init: decrementer frequency = 187500000/60 - Calibrating delay loop... 49.77 BogoMIPS - ... - RAMDISK: Compressed image found at block 0 - VFS: Mounted root (ext2 filesystem). - - bash# - -Boot Linux and pass a flat device tree: ------------ - -First, U-Boot must be compiled with the appropriate defines. See the section -titled "Linux Kernel Interface" above for a more in depth explanation. The -following is an example of how to start a kernel and pass an updated -flat device tree: - -=> print oftaddr -oftaddr=0x300000 -=> print oft -oft=oftrees/mpc8540ads.dtb -=> tftp $oftaddr $oft -Speed: 1000, full duplex -Using TSEC0 device -TFTP from server 192.168.1.1; our IP address is 192.168.1.101 -Filename 'oftrees/mpc8540ads.dtb'. -Load address: 0x300000 -Loading: # -done -Bytes transferred = 4106 (100a hex) -=> tftp $loadaddr $bootfile -Speed: 1000, full duplex -Using TSEC0 device -TFTP from server 192.168.1.1; our IP address is 192.168.1.2 -Filename 'uImage'. -Load address: 0x200000 -Loading:############ -done -Bytes transferred = 1029407 (fb51f hex) -=> print loadaddr -loadaddr=200000 -=> print oftaddr -oftaddr=0x300000 -=> bootm $loadaddr - $oftaddr -## Booting image at 00200000 ... - Image Name: Linux-2.6.17-dirty - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 1029343 Bytes = 1005.2 kB - Load Address: 00000000 - Entry Point: 00000000 - Verifying Checksum ... OK - Uncompressing Kernel Image ... OK -Booting using flat device tree at 0x300000 -Using MPC85xx ADS machine description -Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb -[snip] - - -More About U-Boot Image Types: ------------------------------- - -U-Boot supports the following image types: - - "Standalone Programs" are directly runnable in the environment - provided by U-Boot; it is expected that (if they behave - well) you can continue to work in U-Boot after return from - the Standalone Program. - "OS Kernel Images" are usually images of some Embedded OS which - will take over control completely. Usually these programs - will install their own set of exception handlers, device - drivers, set up the MMU, etc. - this means, that you cannot - expect to re-enter U-Boot except by resetting the CPU. - "RAMDisk Images" are more or less just data blocks, and their - parameters (address, size) are passed to an OS kernel that is - being started. - "Multi-File Images" contain several images, typically an OS - (Linux) kernel image and one or more data images like - RAMDisks. This construct is useful for instance when you want - to boot over the network using BOOTP etc., where the boot - server provides just a single image file, but you want to get - for instance an OS kernel and a RAMDisk image. - - "Multi-File Images" start with a list of image sizes, each - image size (in bytes) specified by an "uint32_t" in network - byte order. This list is terminated by an "(uint32_t)0". - Immediately after the terminating 0 follow the images, one by - one, all aligned on "uint32_t" boundaries (size rounded up to - a multiple of 4 bytes). - - "Firmware Images" are binary images containing firmware (like - U-Boot or FPGA images) which usually will be programmed to - flash memory. - - "Script files" are command sequences that will be executed by - U-Boot's command interpreter; this feature is especially - useful when you configure U-Boot to use a real shell (hush) - as command interpreter. - - -Standalone HOWTO: -================= - -One of the features of U-Boot is that you can dynamically load and -run "standalone" applications, which can use some resources of -U-Boot like console I/O functions or interrupt services. - -Two simple examples are included with the sources: - -"Hello World" Demo: -------------------- - -'examples/hello_world.c' contains a small "Hello World" Demo -application; it is automatically compiled when you build U-Boot. -It's configured to run at address 0x00040004, so you can play with it -like that: - - => loads - ## Ready for S-Record download ... - ~>examples/hello_world.srec - 1 2 3 4 5 6 7 8 9 10 11 ... - [file transfer complete] - [connected] - ## Start Addr = 0x00040004 - - => go 40004 Hello World! This is a test. - ## Starting application at 0x00040004 ... - Hello World - argc = 7 - argv[0] = "40004" - argv[1] = "Hello" - argv[2] = "World!" - argv[3] = "This" - argv[4] = "is" - argv[5] = "a" - argv[6] = "test." - argv[7] = "<NULL>" - Hit any key to exit ... - - ## Application terminated, rc = 0x0 - -Another example, which demonstrates how to register a CPM interrupt -handler with the U-Boot code, can be found in 'examples/timer.c'. -Here, a CPM timer is set up to generate an interrupt every second. -The interrupt service routine is trivial, just printing a '.' -character, but this is just a demo program. The application can be -controlled by the following keys: - - ? - print current values og the CPM Timer registers - b - enable interrupts and start timer - e - stop timer and disable interrupts - q - quit application - - => loads - ## Ready for S-Record download ... - ~>examples/timer.srec - 1 2 3 4 5 6 7 8 9 10 11 ... - [file transfer complete] - [connected] - ## Start Addr = 0x00040004 - - => go 40004 - ## Starting application at 0x00040004 ... - TIMERS=0xfff00980 - Using timer 1 - tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0 - -Hit 'b': - [q, b, e, ?] Set interval 1000000 us - Enabling timer -Hit '?': - [q, b, e, ?] ........ - tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0 -Hit '?': - [q, b, e, ?] . - tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0 -Hit '?': - [q, b, e, ?] . - tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0 -Hit '?': - [q, b, e, ?] . - tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0 -Hit 'e': - [q, b, e, ?] ...Stopping timer -Hit 'q': - [q, b, e, ?] ## Application terminated, rc = 0x0 - - -Minicom warning: -================ - -Over time, many people have reported problems when trying to use the -"minicom" terminal emulation program for serial download. I (wd) -consider minicom to be broken, and recommend not to use it. Under -Unix, I recommend to use C-Kermit for general purpose use (and -especially for kermit binary protocol download ("loadb" command), and -use "cu" for S-Record download ("loads" command). - -Nevertheless, if you absolutely want to use it try adding this -configuration to your "File transfer protocols" section: - - Name Program Name U/D FullScr IO-Red. Multi - X kermit /usr/bin/kermit -i -l %l -s Y U Y N N - Y kermit /usr/bin/kermit -i -l %l -r N D Y N N - - -NetBSD Notes: -============= - -Starting at version 0.9.2, U-Boot supports NetBSD both as host -(build U-Boot) and target system (boots NetBSD/mpc8xx). - -Building requires a cross environment; it is known to work on -NetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also -need gmake since the Makefiles are not compatible with BSD make). -Note that the cross-powerpc package does not install include files; -attempting to build U-Boot will fail because <machine/ansi.h> is -missing. This file has to be installed and patched manually: - - # cd /usr/pkg/cross/powerpc-netbsd/include - # mkdir powerpc - # ln -s powerpc machine - # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h - # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST - -Native builds *don't* work due to incompatibilities between native -and U-Boot include files. - -Booting assumes that (the first part of) the image booted is a -stage-2 loader which in turn loads and then invokes the kernel -proper. Loader sources will eventually appear in the NetBSD source -tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the -meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz - - -Implementation Internals: -========================= - -The following is not intended to be a complete description of every -implementation detail. However, it should help to understand the -inner workings of U-Boot and make it easier to port it to custom -hardware. - - -Initial Stack, Global Data: ---------------------------- - -The implementation of U-Boot is complicated by the fact that U-Boot -starts running out of ROM (flash memory), usually without access to -system RAM (because the memory controller is not initialized yet). -This means that we don't have writable Data or BSS segments, and BSS -is not initialized as zero. To be able to get a C environment working -at all, we have to allocate at least a minimal stack. Implementation -options for this are defined and restricted by the CPU used: Some CPU -models provide on-chip memory (like the IMMR area on MPC8xx and -MPC826x processors), on others (parts of) the data cache can be -locked as (mis-) used as memory, etc. - - Chris Hallinan posted a good summary of these issues to the - U-Boot mailing list: - - Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? - From: "Chris Hallinan" <clh@net1plus.com> - Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) - ... - - Correct me if I'm wrong, folks, but the way I understand it - is this: Using DCACHE as initial RAM for Stack, etc, does not - require any physical RAM backing up the cache. The cleverness - is that the cache is being used as a temporary supply of - necessary storage before the SDRAM controller is setup. It's - beyond the scope of this list to explain the details, but you - can see how this works by studying the cache architecture and - operation in the architecture and processor-specific manuals. - - OCM is On Chip Memory, which I believe the 405GP has 4K. It - is another option for the system designer to use as an - initial stack/RAM area prior to SDRAM being available. Either - option should work for you. Using CS 4 should be fine if your - board designers haven't used it for something that would - cause you grief during the initial boot! It is frequently not - used. - - CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere - with your processor/board/system design. The default value - you will find in any recent u-boot distribution in - walnut.h should work for you. I'd set it to a value larger - than your SDRAM module. If you have a 64MB SDRAM module, set - it above 400_0000. Just make sure your board has no resources - that are supposed to respond to that address! That code in - start.S has been around a while and should work as is when - you get the config right. - - -Chris Hallinan - DS4.COM, Inc. - -It is essential to remember this, since it has some impact on the C -code for the initialization procedures: - -* Initialized global data (data segment) is read-only. Do not attempt - to write it. - -* Do not use any uninitialized global data (or implicitely initialized - as zero data - BSS segment) at all - this is undefined, initiali- - zation is performed later (when relocating to RAM). - -* Stack space is very limited. Avoid big data buffers or things like - that. - -Having only the stack as writable memory limits means we cannot use -normal global data to share information beween the code. But it -turned out that the implementation of U-Boot can be greatly -simplified by making a global data structure (gd_t) available to all -functions. We could pass a pointer to this data as argument to _all_ -functions, but this would bloat the code. Instead we use a feature of -the GCC compiler (Global Register Variables) to share the data: we -place a pointer (gd) to the global data into a register which we -reserve for this purpose. - -When choosing a register for such a purpose we are restricted by the -relevant (E)ABI specifications for the current architecture, and by -GCC's implementation. - -For PowerPC, the following registers have specific use: - R1: stack pointer - R2: reserved for system use - R3-R4: parameter passing and return values - R5-R10: parameter passing - R13: small data area pointer - R30: GOT pointer - R31: frame pointer - - (U-Boot also uses R12 as internal GOT pointer. r12 - is a volatile register so r12 needs to be reset when - going back and forth between asm and C) - - ==> U-Boot will use R2 to hold a pointer to the global data - - Note: on PPC, we could use a static initializer (since the - address of the global data structure is known at compile time), - but it turned out that reserving a register results in somewhat - smaller code - although the code savings are not that big (on - average for all boards 752 bytes for the whole U-Boot image, - 624 text + 127 data). - -On Blackfin, the normal C ABI (except for P3) is followed as documented here: - http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface - - ==> U-Boot will use P3 to hold a pointer to the global data - -On ARM, the following registers are used: - - R0: function argument word/integer result - R1-R3: function argument word - R9: GOT pointer - R10: stack limit (used only if stack checking if enabled) - R11: argument (frame) pointer - R12: temporary workspace - R13: stack pointer - R14: link register - R15: program counter - - ==> U-Boot will use R8 to hold a pointer to the global data - -On Nios II, the ABI is documented here: - http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf - - ==> U-Boot will use gp to hold a pointer to the global data - - Note: on Nios II, we give "-G0" option to gcc and don't use gp - to access small data sections, so gp is free. - -NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, -or current versions of GCC may "optimize" the code too much. - -Memory Management: ------------------- - -U-Boot runs in system state and uses physical addresses, i.e. the -MMU is not used either for address mapping nor for memory protection. - -The available memory is mapped to fixed addresses using the memory -controller. In this process, a contiguous block is formed for each -memory type (Flash, SDRAM, SRAM), even when it consists of several -physical memory banks. - -U-Boot is installed in the first 128 kB of the first Flash bank (on -TQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After -booting and sizing and initializing DRAM, the code relocates itself -to the upper end of DRAM. Immediately below the U-Boot code some -memory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN -configuration setting]. Below that, a structure with global Board -Info data is placed, followed by the stack (growing downward). - -Additionally, some exception handler code is copied to the low 8 kB -of DRAM (0x00000000 ... 0x00001FFF). - -So a typical memory configuration with 16 MB of DRAM could look like -this: - - 0x0000 0000 Exception Vector code - : - 0x0000 1FFF - 0x0000 2000 Free for Application Use - : - : - - : - : - 0x00FB FF20 Monitor Stack (Growing downward) - 0x00FB FFAC Board Info Data and permanent copy of global data - 0x00FC 0000 Malloc Arena - : - 0x00FD FFFF - 0x00FE 0000 RAM Copy of Monitor Code - ... eventually: LCD or video framebuffer - ... eventually: pRAM (Protected RAM - unchanged by reset) - 0x00FF FFFF [End of RAM] - - -System Initialization: ----------------------- - -In the reset configuration, U-Boot starts at the reset entry point -(on most PowerPC systems at address 0x00000100). Because of the reset -configuration for CS0# this is a mirror of the onboard Flash memory. -To be able to re-map memory U-Boot then jumps to its link address. -To be able to implement the initialization code in C, a (small!) -initial stack is set up in the internal Dual Ported RAM (in case CPUs -which provide such a feature like MPC8xx or MPC8260), or in a locked -part of the data cache. After that, U-Boot initializes the CPU core, -the caches and the SIU. - -Next, all (potentially) available memory banks are mapped using a -preliminary mapping. For example, we put them on 512 MB boundaries -(multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash -on 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is -programmed for SDRAM access. Using the temporary configuration, a -simple memory test is run that determines the size of the SDRAM -banks. - -When there is more than one SDRAM bank, and the banks are of -different size, the largest is mapped first. For equal size, the first -bank (CS2#) is mapped first. The first mapping is always for address -0x00000000, with any additional banks following immediately to create -contiguous memory starting from 0. - -Then, the monitor installs itself at the upper end of the SDRAM area -and allocates memory for use by malloc() and for the global Board -Info data; also, the exception vector code is copied to the low RAM -pages, and the final stack is set up. - -Only after this relocation will you have a "normal" C environment; -until that you are restricted in several ways, mostly because you are -running from ROM, and because the code will have to be relocated to a -new address in RAM. - - -U-Boot Porting Guide: ----------------------- - -[Based on messages by Jerry Van Baren in the U-Boot-Users mailing -list, October 2002] - - -int main(int argc, char *argv[]) -{ - sighandler_t no_more_time; - - signal(SIGALRM, no_more_time); - alarm(PROJECT_DEADLINE - toSec (3 * WEEK)); - - if (available_money > available_manpower) { - Pay consultant to port U-Boot; - return 0; - } - - Download latest U-Boot source; - - Subscribe to u-boot mailing list; - - if (clueless) - email("Hi, I am new to U-Boot, how do I get started?"); - - while (learning) { - Read the README file in the top level directory; - Read http://www.denx.de/twiki/bin/view/DULG/Manual; - Read applicable doc/*.README; - Read the source, Luke; - /* find . -name "*.[chS]" | xargs grep -i <keyword> */ - } - - if (available_money > toLocalCurrency ($2500)) - Buy a BDI3000; - else - Add a lot of aggravation and time; - - if (a similar board exists) { /* hopefully... */ - cp -a board/<similar> board/<myboard> - cp include/configs/<similar>.h include/configs/<myboard>.h - } else { - Create your own board support subdirectory; - Create your own board include/configs/<myboard>.h file; - } - Edit new board/<myboard> files - Edit new include/configs/<myboard>.h - - while (!accepted) { - while (!running) { - do { - Add / modify source code; - } until (compiles); - Debug; - if (clueless) - email("Hi, I am having problems..."); - } - Send patch file to the U-Boot email list; - if (reasonable critiques) - Incorporate improvements from email list code review; - else - Defend code as written; - } - - return 0; -} - -void no_more_time (int sig) -{ - hire_a_guru(); -} - - -Coding Standards: ------------------ - -All contributions to U-Boot should conform to the Linux kernel -coding style; see the file "Documentation/CodingStyle" and the script -"scripts/Lindent" in your Linux kernel source directory. In sources -originating from U-Boot a style corresponding to "Lindent -pcs" (adding -spaces before parameters to function calls) is actually used. - -Source files originating from a different project (for example the -MTD subsystem) are generally exempt from these guidelines and are not -reformated to ease subsequent migration to newer versions of those -sources. - -Please note that U-Boot is implemented in C (and to some small parts in -Assembler); no C++ is used, so please do not use C++ style comments (//) -in your code. - -Please also stick to the following formatting rules: -- remove any trailing white space -- use TAB characters for indentation, not spaces -- make sure NOT to use DOS '\r\n' line feeds -- do not add more than 2 empty lines to source files -- do not add trailing empty lines to source files - -Submissions which do not conform to the standards may be returned -with a request to reformat the changes. - - -Submitting Patches: -------------------- - -Since the number of patches for U-Boot is growing, we need to -establish some rules. Submissions which do not conform to these rules -may be rejected, even when they contain important and valuable stuff. - -Please see http://www.denx.de/wiki/U-Boot/Patches for details. - -Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>; -see http://lists.denx.de/mailman/listinfo/u-boot - -When you send a patch, please include the following information with -it: - -* For bug fixes: a description of the bug and how your patch fixes - this bug. Please try to include a way of demonstrating that the - patch actually fixes something. - -* For new features: a description of the feature and your - implementation. - -* A CHANGELOG entry as plaintext (separate from the patch) - -* For major contributions, your entry to the CREDITS file - -* When you add support for a new board, don't forget to add this - board to the MAKEALL script, too. - -* If your patch adds new configuration options, don't forget to - document these in the README file. - -* The patch itself. If you are using git (which is *strongly* - recommended) you can easily generate the patch using the - "git-format-patch". If you then use "git-send-email" to send it to - the U-Boot mailing list, you will avoid most of the common problems - with some other mail clients. - - If you cannot use git, use "diff -purN OLD NEW". If your version of - diff does not support these options, then get the latest version of - GNU diff. - - The current directory when running this command shall be the parent - directory of the U-Boot source tree (i. e. please make sure that - your patch includes sufficient directory information for the - affected files). - - We prefer patches as plain text. MIME attachments are discouraged, - and compressed attachments must not be used. - -* If one logical set of modifications affects or creates several - files, all these changes shall be submitted in a SINGLE patch file. - -* Changesets that contain different, unrelated modifications shall be - submitted as SEPARATE patches, one patch per changeset. - - -Notes: - -* Before sending the patch, run the MAKEALL script on your patched - source tree and make sure that no errors or warnings are reported - for any of the boards. - -* Keep your modifications to the necessary minimum: A patch - containing several unrelated changes or arbitrary reformats will be - returned with a request to re-formatting / split it. - -* If you modify existing code, make sure that your new code does not - add to the memory footprint of the code ;-) Small is beautiful! - When adding new features, these should compile conditionally only - (using #ifdef), and the resulting code with the new feature - disabled must not need more memory than the old code without your - modification. - -* Remember that there is a size limit of 100 kB per message on the - u-boot mailing list. Bigger patches will be moderated. If they are - reasonable and not too big, they will be acknowledged. But patches - bigger than the size limit should be avoided. +THIS IS ONLY FOR THE EMULATED SAM460EX IN QEMU, NOT FOR USE ON REAL BOARD. diff --git a/README.u-boot b/README.u-boot new file mode 100644 index 0000000..a9c98f2 --- /dev/null +++ b/README.u-boot @@ -0,0 +1,4297 @@ +# +# (C) Copyright 2000 - 2009 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +Summary: +======== + +This directory contains the source code for U-Boot, a boot loader for +Embedded boards based on PowerPC, ARM, MIPS and several other +processors, which can be installed in a boot ROM and used to +initialize and test the hardware or to download and run application +code. + +The development of U-Boot is closely related to Linux: some parts of +the source code originate in the Linux source tree, we have some +header files in common, and special provision has been made to +support booting of Linux images. + +Some attention has been paid to make this software easily +configurable and extendable. For instance, all monitor commands are +implemented with the same call interface, so that it's very easy to +add new commands. Also, instead of permanently adding rarely used +code (for instance hardware test utilities) to the monitor, you can +load and run it dynamically. + + +Status: +======= + +In general, all boards for which a configuration option exists in the +Makefile have been tested to some extent and can be considered +"working". In fact, many of them are used in production systems. + +In case of problems see the CHANGELOG and CREDITS files to find out +who contributed the specific port. The MAINTAINERS file lists board +maintainers. + + +Where to get help: +================== + +In case you have questions about, problems with or contributions for +U-Boot you should send a message to the U-Boot mailing list at +<u-boot@lists.denx.de>. There is also an archive of previous traffic +on the mailing list - please search the archive before asking FAQ's. +Please see http://lists.denx.de/pipermail/u-boot and +http://dir.gmane.org/gmane.comp.boot-loaders.u-boot + + +Where to get source code: +========================= + +The U-Boot source code is maintained in the git repository at +git://www.denx.de/git/u-boot.git ; you can browse it online at +http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary + +The "snapshot" links on this page allow you to download tarballs of +any version you might be interested in. Official releases are also +available for FTP download from the ftp://ftp.denx.de/pub/u-boot/ +directory. + +Pre-built (and tested) images are available from +ftp://ftp.denx.de/pub/u-boot/images/ + + +Where we come from: +=================== + +- start from 8xxrom sources +- create PPCBoot project (http://sourceforge.net/projects/ppcboot) +- clean up code +- make it easier to add custom boards +- make it possible to add other [PowerPC] CPUs +- extend functions, especially: + * Provide extended interface to Linux boot loader + * S-Record download + * network boot + * PCMCIA / CompactFlash / ATA disk / SCSI ... boot +- create ARMBoot project (http://sourceforge.net/projects/armboot) +- add other CPU families (starting with ARM) +- create U-Boot project (http://sourceforge.net/projects/u-boot) +- current project page: see http://www.denx.de/wiki/U-Boot + + +Names and Spelling: +=================== + +The "official" name of this project is "Das U-Boot". The spelling +"U-Boot" shall be used in all written text (documentation, comments +in source files etc.). Example: + + This is the README file for the U-Boot project. + +File names etc. shall be based on the string "u-boot". Examples: + + include/asm-ppc/u-boot.h + + #include <asm/u-boot.h> + +Variable names, preprocessor constants etc. shall be either based on +the string "u_boot" or on "U_BOOT". Example: + + U_BOOT_VERSION u_boot_logo + IH_OS_U_BOOT u_boot_hush_start + + +Versioning: +=========== + +U-Boot uses a 3 level version number containing a version, a +sub-version, and a patchlevel: "U-Boot-2.34.5" means version "2", +sub-version "34", and patchlevel "4". + +The patchlevel is used to indicate certain stages of development +between released versions, i. e. officially released versions of +U-Boot will always have a patchlevel of "0". + + +Directory Hierarchy: +==================== + +/arch Architecture specific files + /arm Files generic to ARM architecture + /cpu CPU specific files + /arm720t Files specific to ARM 720 CPUs + /arm920t Files specific to ARM 920 CPUs + /at91rm9200 Files specific to Atmel AT91RM9200 CPU + /imx Files specific to Freescale MC9328 i.MX CPUs + /s3c24x0 Files specific to Samsung S3C24X0 CPUs + /arm925t Files specific to ARM 925 CPUs + /arm926ejs Files specific to ARM 926 CPUs + /arm1136 Files specific to ARM 1136 CPUs + /ixp Files specific to Intel XScale IXP CPUs + /pxa Files specific to Intel XScale PXA CPUs + /s3c44b0 Files specific to Samsung S3C44B0 CPUs + /sa1100 Files specific to Intel StrongARM SA1100 CPUs + /lib Architecture specific library files + /avr32 Files generic to AVR32 architecture + /cpu CPU specific files + /lib Architecture specific library files + /blackfin Files generic to Analog Devices Blackfin architecture + /cpu CPU specific files + /lib Architecture specific library files + /i386 Files generic to i386 architecture + /cpu CPU specific files + /lib Architecture specific library files + /m68k Files generic to m68k architecture + /cpu CPU specific files + /mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs + /mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs + /mcf532x Files specific to Freescale ColdFire MCF5329 CPUs + /mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs + /mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs + /lib Architecture specific library files + /microblaze Files generic to microblaze architecture + /cpu CPU specific files + /lib Architecture specific library files + /mips Files generic to MIPS architecture + /cpu CPU specific files + /lib Architecture specific library files + /nios2 Files generic to Altera NIOS2 architecture + /cpu CPU specific files + /lib Architecture specific library files + /powerpc Files generic to PowerPC architecture + /cpu CPU specific files + /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs + /mpc5xx Files specific to Freescale MPC5xx CPUs + /mpc5xxx Files specific to Freescale MPC5xxx CPUs + /mpc8xx Files specific to Freescale MPC8xx CPUs + /mpc8220 Files specific to Freescale MPC8220 CPUs + /mpc824x Files specific to Freescale MPC824x CPUs + /mpc8260 Files specific to Freescale MPC8260 CPUs + /mpc85xx Files specific to Freescale MPC85xx CPUs + /ppc4xx Files specific to AMCC PowerPC 4xx CPUs + /lib Architecture specific library files + /sh Files generic to SH architecture + /cpu CPU specific files + /sh2 Files specific to sh2 CPUs + /sh3 Files specific to sh3 CPUs + /sh4 Files specific to sh4 CPUs + /lib Architecture specific library files + /sparc Files generic to SPARC architecture + /cpu CPU specific files + /leon2 Files specific to Gaisler LEON2 SPARC CPU + /leon3 Files specific to Gaisler LEON3 SPARC CPU + /lib Architecture specific library files +/api Machine/arch independent API for external apps +/board Board dependent files +/common Misc architecture independent functions +/disk Code for disk drive partition handling +/doc Documentation (don't expect too much) +/drivers Commonly used device drivers +/examples Example code for standalone applications, etc. +/fs Filesystem code (cramfs, ext2, jffs2, etc.) +/include Header Files +/lib Files generic to all architectures + /libfdt Library files to support flattened device trees + /lzma Library files to support LZMA decompression + /lzo Library files to support LZO decompression +/net Networking code +/post Power On Self Test +/rtc Real Time Clock drivers +/tools Tools to build S-Record or U-Boot images, etc. + +Software Configuration: +======================= + +Configuration is usually done using C preprocessor defines; the +rationale behind that is to avoid dead code whenever possible. + +There are two classes of configuration variables: + +* Configuration _OPTIONS_: + These are selectable by the user and have names beginning with + "CONFIG_". + +* Configuration _SETTINGS_: + These depend on the hardware etc. and should not be meddled with if + you don't know what you're doing; they have names beginning with + "CONFIG_SYS_". + +Later we will add a configuration tool - probably similar to or even +identical to what's used for the Linux kernel. Right now, we have to +do the configuration by hand, which means creating some symbolic +links and editing some configuration files. We use the TQM8xxL boards +as an example here. + + +Selection of Processor Architecture and Board Type: +--------------------------------------------------- + +For all supported boards there are ready-to-use default +configurations available; just type "make <board_name>_config". + +Example: For a TQM823L module type: + + cd u-boot + make TQM823L_config + +For the Cogent platform, you need to specify the CPU type as well; +e.g. "make cogent_mpc8xx_config". And also configure the cogent +directory according to the instructions in cogent/README. + + +Configuration Options: +---------------------- + +Configuration depends on the combination of board and CPU type; all +such information is kept in a configuration file +"include/configs/<board_name>.h". + +Example: For a TQM823L module, all configuration settings are in +"include/configs/TQM823L.h". + + +Many of the options are named exactly as the corresponding Linux +kernel configuration options. The intention is to make it easier to +build a config tool - later. + + +The following options need to be configured: + +- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. + +- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. + +- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) + Define exactly one, e.g. CONFIG_ATSTK1002 + +- CPU Module Type: (if CONFIG_COGENT is defined) + Define exactly one of + CONFIG_CMA286_60_OLD +--- FIXME --- not tested yet: + CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P, + CONFIG_CMA287_23, CONFIG_CMA287_50 + +- Motherboard Type: (if CONFIG_COGENT is defined) + Define exactly one of + CONFIG_CMA101, CONFIG_CMA102 + +- Motherboard I/O Modules: (if CONFIG_COGENT is defined) + Define one or more of + CONFIG_CMA302 + +- Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined) + Define one or more of + CONFIG_LCD_HEARTBEAT - update a character position on + the LCD display every second with + a "rotator" |\-/|\-/ + +- Board flavour: (if CONFIG_MPC8260ADS is defined) + CONFIG_ADSTYPE + Possible values are: + CONFIG_SYS_8260ADS - original MPC8260ADS + CONFIG_SYS_8266ADS - MPC8266ADS + CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR + CONFIG_SYS_8272ADS - MPC8272ADS + +- MPC824X Family Member (if CONFIG_MPC824X is defined) + Define exactly one of + CONFIG_MPC8240, CONFIG_MPC8245 + +- 8xx CPU Options: (if using an MPC8xx CPU) + CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if + get_gclk_freq() cannot work + e.g. if there is no 32KHz + reference PIT/RTC clock + CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK + or XTAL/EXTAL) + +- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): + CONFIG_SYS_8xx_CPUCLK_MIN + CONFIG_SYS_8xx_CPUCLK_MAX + CONFIG_8xx_CPUCLK_DEFAULT + See doc/README.MPC866 + + CONFIG_SYS_MEASURE_CPUCLK + + Define this to measure the actual CPU clock instead + of relying on the correctness of the configured + values. Mostly useful for board bringup to make sure + the PLL is locked at the intended frequency. Note + that this requires a (stable) reference clock (32 kHz + RTC clock or CONFIG_SYS_8XX_XIN) + + CONFIG_SYS_DELAYED_ICACHE + + Define this option if you want to enable the + ICache only when Code runs from RAM. + +- Intel Monahans options: + CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO + + Defines the Monahans run mode to oscillator + ratio. Valid values are 8, 16, 24, 31. The core + frequency is this value multiplied by 13 MHz. + + CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO + + Defines the Monahans turbo mode to oscillator + ratio. Valid values are 1 (default if undefined) and + 2. The core frequency as calculated above is multiplied + by this value. + +- Linux Kernel Interface: + CONFIG_CLOCKS_IN_MHZ + + U-Boot stores all clock information in Hz + internally. For binary compatibility with older Linux + kernels (which expect the clocks passed in the + bd_info data to be in MHz) the environment variable + "clocks_in_mhz" can be defined so that U-Boot + converts clock data to MHZ before passing it to the + Linux kernel. + When CONFIG_CLOCKS_IN_MHZ is defined, a definition of + "clocks_in_mhz=1" is automatically included in the + default environment. + + CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] + + When transferring memsize parameter to linux, some versions + expect it to be in bytes, others in MB. + Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. + + CONFIG_OF_LIBFDT + + New kernel versions are expecting firmware settings to be + passed using flattened device trees (based on open firmware + concepts). + + CONFIG_OF_LIBFDT + * New libfdt-based support + * Adds the "fdt" command + * The bootm command automatically updates the fdt + + OF_CPU - The proper name of the cpus node (only required for + MPC512X and MPC5xxx based boards). + OF_SOC - The proper name of the soc node (only required for + MPC512X and MPC5xxx based boards). + OF_TBCLK - The timebase frequency. + OF_STDOUT_PATH - The path to the console device + + boards with QUICC Engines require OF_QE to set UCC MAC + addresses + + CONFIG_OF_BOARD_SETUP + + Board code has addition modification that it wants to make + to the flat device tree before handing it off to the kernel + + CONFIG_OF_BOOT_CPU + + This define fills in the correct boot CPU in the boot + param header, the default value is zero if undefined. + + CONFIG_OF_IDE_FIXUP + + U-Boot can detect if an IDE device is present or not. + If not, and this new config option is activated, U-Boot + removes the ATA node from the DTS before booting Linux, + so the Linux IDE driver does not probe the device and + crash. This is needed for buggy hardware (uc101) where + no pull down resistor is connected to the signal IDE5V_DD7. + +- vxWorks boot parameters: + + bootvx constructs a valid bootline using the following + environments variables: bootfile, ipaddr, serverip, hostname. + It loads the vxWorks image pointed bootfile. + + CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name + CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address + CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server + CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters + + CONFIG_SYS_VXWORKS_ADD_PARAMS + + Add it at the end of the bootline. E.g "u=username pw=secret" + + Note: If a "bootargs" environment is defined, it will overwride + the defaults discussed just above. + +- Serial Ports: + CONFIG_PL010_SERIAL + + Define this if you want support for Amba PrimeCell PL010 UARTs. + + CONFIG_PL011_SERIAL + + Define this if you want support for Amba PrimeCell PL011 UARTs. + + CONFIG_PL011_CLOCK + + If you have Amba PrimeCell PL011 UARTs, set this variable to + the clock speed of the UARTs. + + CONFIG_PL01x_PORTS + + If you have Amba PrimeCell PL010 or PL011 UARTs on your board, + define this to a list of base addresses for each (supported) + port. See e.g. include/configs/versatile.h + + +- Console Interface: + Depending on board, define exactly one serial port + (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, + CONFIG_8xx_CONS_SCC1, ...), or switch off the serial + console by defining CONFIG_8xx_CONS_NONE + + Note: if CONFIG_8xx_CONS_NONE is defined, the serial + port routines must be defined elsewhere + (i.e. serial_init(), serial_getc(), ...) + + CONFIG_CFB_CONSOLE + Enables console device for a color framebuffer. Needs following + defines (cf. smiLynxEM, i8042, board/eltec/bab7xx) + VIDEO_FB_LITTLE_ENDIAN graphic memory organisation + (default big endian) + VIDEO_HW_RECTFILL graphic chip supports + rectangle fill + (cf. smiLynxEM) + VIDEO_HW_BITBLT graphic chip supports + bit-blit (cf. smiLynxEM) + VIDEO_VISIBLE_COLS visible pixel columns + (cols=pitch) + VIDEO_VISIBLE_ROWS visible pixel rows + VIDEO_PIXEL_SIZE bytes per pixel + VIDEO_DATA_FORMAT graphic data format + (0-5, cf. cfb_console.c) + VIDEO_FB_ADRS framebuffer address + VIDEO_KBD_INIT_FCT keyboard int fct + (i.e. i8042_kbd_init()) + VIDEO_TSTC_FCT test char fct + (i.e. i8042_tstc) + VIDEO_GETC_FCT get char fct + (i.e. i8042_getc) + CONFIG_CONSOLE_CURSOR cursor drawing on/off + (requires blink timer + cf. i8042.c) + CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) + CONFIG_CONSOLE_TIME display time/date info in + upper right corner + (requires CONFIG_CMD_DATE) + CONFIG_VIDEO_LOGO display Linux logo in + upper left corner + CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of + linux_logo.h for logo. + Requires CONFIG_VIDEO_LOGO + CONFIG_CONSOLE_EXTRA_INFO + additional board info beside + the logo + + When CONFIG_CFB_CONSOLE is defined, video console is + default i/o. Serial console can be forced with + environment 'console=serial'. + + When CONFIG_SILENT_CONSOLE is defined, all console + messages (by U-Boot and Linux!) can be silenced with + the "silent" environment variable. See + doc/README.silent for more information. + +- Console Baudrate: + CONFIG_BAUDRATE - in bps + Select one of the baudrates listed in + CONFIG_SYS_BAUDRATE_TABLE, see below. + CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale + +- Console Rx buffer length + With CONFIG_SYS_SMC_RXBUFLEN it is possible to define + the maximum receive buffer length for the SMC. + This option is actual only for 82xx and 8xx possible. + If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE + must be defined, to setup the maximum idle timeout for + the SMC. + +- Interrupt driven serial port input: + CONFIG_SERIAL_SOFTWARE_FIFO + + PPC405GP only. + Use an interrupt handler for receiving data on the + serial port. It also enables using hardware handshake + (RTS/CTS) and UART's built-in FIFO. Set the number of + bytes the interrupt driven input buffer should have. + + Leave undefined to disable this feature, including + disable the buffer and hardware handshake. + +- Console UART Number: + CONFIG_UART1_CONSOLE + + AMCC PPC4xx only. + If defined internal UART1 (and not UART0) is used + as default U-Boot console. + +- Boot Delay: CONFIG_BOOTDELAY - in seconds + Delay before automatically booting the default image; + set to -1 to disable autoboot. + + See doc/README.autoboot for these options that + work with CONFIG_BOOTDELAY. None are required. + CONFIG_BOOT_RETRY_TIME + CONFIG_BOOT_RETRY_MIN + CONFIG_AUTOBOOT_KEYED + CONFIG_AUTOBOOT_PROMPT + CONFIG_AUTOBOOT_DELAY_STR + CONFIG_AUTOBOOT_STOP_STR + CONFIG_AUTOBOOT_DELAY_STR2 + CONFIG_AUTOBOOT_STOP_STR2 + CONFIG_ZERO_BOOTDELAY_CHECK + CONFIG_RESET_TO_RETRY + +- Autoboot Command: + CONFIG_BOOTCOMMAND + Only needed when CONFIG_BOOTDELAY is enabled; + define a command string that is automatically executed + when no character is read on the console interface + within "Boot Delay" after reset. + + CONFIG_BOOTARGS + This can be used to pass arguments to the bootm + command. The value of CONFIG_BOOTARGS goes into the + environment value "bootargs". + + CONFIG_RAMBOOT and CONFIG_NFSBOOT + The value of these goes into the environment as + "ramboot" and "nfsboot" respectively, and can be used + as a convenience, when switching between booting from + RAM and NFS. + +- Pre-Boot Commands: + CONFIG_PREBOOT + + When this option is #defined, the existence of the + environment variable "preboot" will be checked + immediately before starting the CONFIG_BOOTDELAY + countdown and/or running the auto-boot command resp. + entering interactive mode. + + This feature is especially useful when "preboot" is + automatically generated or modified. For an example + see the LWMON board specific code: here "preboot" is + modified when the user holds down a certain + combination of keys on the (special) keyboard when + booting the systems + +- Serial Download Echo Mode: + CONFIG_LOADS_ECHO + If defined to 1, all characters received during a + serial download (using the "loads" command) are + echoed back. This might be needed by some terminal + emulations (like "cu"), but may as well just take + time on others. This setting #define's the initial + value of the "loads_echo" environment variable. + +- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) + CONFIG_KGDB_BAUDRATE + Select one of the baudrates listed in + CONFIG_SYS_BAUDRATE_TABLE, see below. + +- Monitor Functions: + Monitor commands can be included or excluded + from the build by using the #include files + "config_cmd_all.h" and #undef'ing unwanted + commands, or using "config_cmd_default.h" + and augmenting with additional #define's + for wanted commands. + + The default command configuration includes all commands + except those marked below with a "*". + + CONFIG_CMD_ASKENV * ask for env variable + CONFIG_CMD_BDI bdinfo + CONFIG_CMD_BEDBUG * Include BedBug Debugger + CONFIG_CMD_BMP * BMP support + CONFIG_CMD_BSP * Board specific commands + CONFIG_CMD_BOOTD bootd + CONFIG_CMD_CACHE * icache, dcache + CONFIG_CMD_CONSOLE coninfo + CONFIG_CMD_DATE * support for RTC, date/time... + CONFIG_CMD_DHCP * DHCP support + CONFIG_CMD_DIAG * Diagnostics + CONFIG_CMD_DS4510 * ds4510 I2C gpio commands + CONFIG_CMD_DS4510_INFO * ds4510 I2C info command + CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd + CONFIG_CMD_DS4510_RST * ds4510 I2C rst command + CONFIG_CMD_DTT * Digital Therm and Thermostat + CONFIG_CMD_ECHO echo arguments + CONFIG_CMD_EDITENV edit env variable + CONFIG_CMD_EEPROM * EEPROM read/write support + CONFIG_CMD_ELF * bootelf, bootvx + CONFIG_CMD_SAVEENV saveenv + CONFIG_CMD_FDC * Floppy Disk Support + CONFIG_CMD_FAT * FAT partition support + CONFIG_CMD_FDOS * Dos diskette Support + CONFIG_CMD_FLASH flinfo, erase, protect + CONFIG_CMD_FPGA FPGA device initialization support + CONFIG_CMD_HWFLOW * RTS/CTS hw flow control + CONFIG_CMD_I2C * I2C serial bus support + CONFIG_CMD_IDE * IDE harddisk support + CONFIG_CMD_IMI iminfo + CONFIG_CMD_IMLS List all found images + CONFIG_CMD_IMMAP * IMMR dump support + CONFIG_CMD_IRQ * irqinfo + CONFIG_CMD_ITEST Integer/string test of 2 values + CONFIG_CMD_JFFS2 * JFFS2 Support + CONFIG_CMD_KGDB * kgdb + CONFIG_CMD_LOADB loadb + CONFIG_CMD_LOADS loads + CONFIG_CMD_MD5SUM print md5 message digest + (requires CONFIG_CMD_MEMORY and CONFIG_MD5) + CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, + loop, loopw, mtest + CONFIG_CMD_MISC Misc functions like sleep etc + CONFIG_CMD_MMC * MMC memory mapped support + CONFIG_CMD_MII * MII utility commands + CONFIG_CMD_MTDPARTS * MTD partition support + CONFIG_CMD_NAND * NAND support + CONFIG_CMD_NET bootp, tftpboot, rarpboot + CONFIG_CMD_PCA953X * PCA953x I2C gpio commands + CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command + CONFIG_CMD_PCI * pciinfo + CONFIG_CMD_PCMCIA * PCMCIA support + CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network + host + CONFIG_CMD_PORTIO * Port I/O + CONFIG_CMD_REGINFO * Register dump + CONFIG_CMD_RUN run command in env variable + CONFIG_CMD_SAVES * save S record dump + CONFIG_CMD_SCSI * SCSI Support + CONFIG_CMD_SDRAM * print SDRAM configuration information + (requires CONFIG_CMD_I2C) + CONFIG_CMD_SETGETDCR Support for DCR Register access + (4xx only) + CONFIG_CMD_SHA1 print sha1 memory digest + (requires CONFIG_CMD_MEMORY) + CONFIG_CMD_SOURCE "source" command Support + CONFIG_CMD_SPI * SPI serial bus support + CONFIG_CMD_USB * USB support + CONFIG_CMD_VFD * VFD support (TRAB) + CONFIG_CMD_CDP * Cisco Discover Protocol support + CONFIG_CMD_FSL * Microblaze FSL support + + + EXAMPLE: If you want all functions except of network + support you can write: + + #include "config_cmd_all.h" + #undef CONFIG_CMD_NET + + Other Commands: + fdt (flattened device tree) command: CONFIG_OF_LIBFDT + + Note: Don't enable the "icache" and "dcache" commands + (configuration option CONFIG_CMD_CACHE) unless you know + what you (and your U-Boot users) are doing. Data + cache cannot be enabled on systems like the 8xx or + 8260 (where accesses to the IMMR region must be + uncached), and it cannot be disabled on all other + systems where we (mis-) use the data cache to hold an + initial stack and some data. + + + XXX - this list needs to get updated! + +- Watchdog: + CONFIG_WATCHDOG + If this variable is defined, it enables watchdog + support. There must be support in the platform specific + code for a watchdog. For the 8xx and 8260 CPUs, the + SIU Watchdog feature is enabled in the SYPCR + register. + +- U-Boot Version: + CONFIG_VERSION_VARIABLE + If this variable is defined, an environment variable + named "ver" is created by U-Boot showing the U-Boot + version as printed by the "version" command. + This variable is readonly. + +- Real-Time Clock: + + When CONFIG_CMD_DATE is selected, the type of the RTC + has to be selected, too. Define exactly one of the + following options: + + CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx + CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC + CONFIG_RTC_MC13783 - use MC13783 RTC + CONFIG_RTC_MC146818 - use MC146818 RTC + CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC + CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC + CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC + CONFIG_RTC_DS164x - use Dallas DS164x RTC + CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC + CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC + CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 + + Note that if the RTC uses I2C, then the I2C interface + must also be configured. See I2C Support, below. + +- GPIO Support: + CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO + CONFIG_PCA953X_INFO - enable pca953x info command + + Note that if the GPIO device uses I2C, then the I2C interface + must also be configured. See I2C Support, below. + +- Timestamp Support: + + When CONFIG_TIMESTAMP is selected, the timestamp + (date and time) of an image is printed by image + commands like bootm or iminfo. This option is + automatically enabled when you select CONFIG_CMD_DATE . + +- Partition Support: + CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION + and/or CONFIG_ISO_PARTITION and/or CONFIG_EFI_PARTITION + + If IDE or SCSI support is enabled (CONFIG_CMD_IDE or + CONFIG_CMD_SCSI) you must configure support for at + least one partition type as well. + +- IDE Reset method: + CONFIG_IDE_RESET_ROUTINE - this is defined in several + board configurations files but used nowhere! + + CONFIG_IDE_RESET - is this is defined, IDE Reset will + be performed by calling the function + ide_set_reset(int reset) + which has to be defined in a board specific file + +- ATAPI Support: + CONFIG_ATAPI + + Set this to enable ATAPI support. + +- LBA48 Support + CONFIG_LBA48 + + Set this to enable support for disks larger than 137GB + Also look at CONFIG_SYS_64BIT_LBA. + Whithout these , LBA48 support uses 32bit variables and will 'only' + support disks up to 2.1TB. + + CONFIG_SYS_64BIT_LBA: + When enabled, makes the IDE subsystem use 64bit sector addresses. + Default is 32bit. + +- SCSI Support: + At the moment only there is only support for the + SYM53C8XX SCSI controller; define + CONFIG_SCSI_SYM53C8XX to enable it. + + CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and + CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID * + CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the + maximum numbers of LUNs, SCSI ID's and target + devices. + CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) + +- NETWORK Support (PCI): + CONFIG_E1000 + Support for Intel 8254x gigabit chips. + + CONFIG_E1000_FALLBACK_MAC + default MAC for empty EEPROM after production. + + CONFIG_EEPRO100 + Support for Intel 82557/82559/82559ER chips. + Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM + write routine for first time initialisation. + + CONFIG_TULIP + Support for Digital 2114x chips. + Optional CONFIG_TULIP_SELECT_MEDIA for board specific + modem chip initialisation (KS8761/QS6611). + + CONFIG_NATSEMI + Support for National dp83815 chips. + + CONFIG_NS8382X + Support for National dp8382[01] gigabit chips. + +- NETWORK Support (other): + + CONFIG_DRIVER_AT91EMAC + Support for AT91RM9200 EMAC. + + CONFIG_RMII + Define this to use reduced MII inteface + + CONFIG_DRIVER_AT91EMAC_QUIET + If this defined, the driver is quiet. + The driver doen't show link status messages. + + CONFIG_DRIVER_LAN91C96 + Support for SMSC's LAN91C96 chips. + + CONFIG_LAN91C96_BASE + Define this to hold the physical address + of the LAN91C96's I/O space + + CONFIG_LAN91C96_USE_32_BIT + Define this to enable 32 bit addressing + + CONFIG_DRIVER_SMC91111 + Support for SMSC's LAN91C111 chip + + CONFIG_SMC91111_BASE + Define this to hold the physical address + of the device (I/O space) + + CONFIG_SMC_USE_32_BIT + Define this if data bus is 32 bits + + CONFIG_SMC_USE_IOFUNCS + Define this to use i/o functions instead of macros + (some hardware wont work with macros) + + CONFIG_SMC911X + Support for SMSC's LAN911x and LAN921x chips + + CONFIG_SMC911X_BASE + Define this to hold the physical address + of the device (I/O space) + + CONFIG_SMC911X_32_BIT + Define this if data bus is 32 bits + + CONFIG_SMC911X_16_BIT + Define this if data bus is 16 bits. If your processor + automatically converts one 32 bit word to two 16 bit + words you may also try CONFIG_SMC911X_32_BIT. + +- USB Support: + At the moment only the UHCI host controller is + supported (PIP405, MIP405, MPC5200); define + CONFIG_USB_UHCI to enable it. + define CONFIG_USB_KEYBOARD to enable the USB Keyboard + and define CONFIG_USB_STORAGE to enable the USB + storage devices. + Note: + Supported are USB Keyboards and USB Floppy drives + (TEAC FD-05PUB). + MPC5200 USB requires additional defines: + CONFIG_USB_CLOCK + for 528 MHz Clock: 0x0001bbbb + CONFIG_PSC3_USB + for USB on PSC3 + CONFIG_USB_CONFIG + for differential drivers: 0x00001000 + for single ended drivers: 0x00005000 + for differential drivers on PSC3: 0x00000100 + for single ended drivers on PSC3: 0x00004100 + CONFIG_SYS_USB_EVENT_POLL + May be defined to allow interrupt polling + instead of using asynchronous interrupts + +- USB Device: + Define the below if you wish to use the USB console. + Once firmware is rebuilt from a serial console issue the + command "setenv stdin usbtty; setenv stdout usbtty" and + attach your USB cable. The Unix command "dmesg" should print + it has found a new device. The environment variable usbtty + can be set to gserial or cdc_acm to enable your device to + appear to a USB host as a Linux gserial device or a + Common Device Class Abstract Control Model serial device. + If you select usbtty = gserial you should be able to enumerate + a Linux host by + # modprobe usbserial vendor=0xVendorID product=0xProductID + else if using cdc_acm, simply setting the environment + variable usbtty to be cdc_acm should suffice. The following + might be defined in YourBoardName.h + + CONFIG_USB_DEVICE + Define this to build a UDC device + + CONFIG_USB_TTY + Define this to have a tty type of device available to + talk to the UDC device + + CONFIG_SYS_CONSOLE_IS_IN_ENV + Define this if you want stdin, stdout &/or stderr to + be set to usbtty. + + mpc8xx: + CONFIG_SYS_USB_EXTC_CLK 0xBLAH + Derive USB clock from external clock "blah" + - CONFIG_SYS_USB_EXTC_CLK 0x02 + + CONFIG_SYS_USB_BRG_CLK 0xBLAH + Derive USB clock from brgclk + - CONFIG_SYS_USB_BRG_CLK 0x04 + + If you have a USB-IF assigned VendorID then you may wish to + define your own vendor specific values either in BoardName.h + or directly in usbd_vendor_info.h. If you don't define + CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, + CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot + should pretend to be a Linux device to it's target host. + + CONFIG_USBD_MANUFACTURER + Define this string as the name of your company for + - CONFIG_USBD_MANUFACTURER "my company" + + CONFIG_USBD_PRODUCT_NAME + Define this string as the name of your product + - CONFIG_USBD_PRODUCT_NAME "acme usb device" + + CONFIG_USBD_VENDORID + Define this as your assigned Vendor ID from the USB + Implementors Forum. This *must* be a genuine Vendor ID + to avoid polluting the USB namespace. + - CONFIG_USBD_VENDORID 0xFFFF + + CONFIG_USBD_PRODUCTID + Define this as the unique Product ID + for your device + - CONFIG_USBD_PRODUCTID 0xFFFF + + +- MMC Support: + The MMC controller on the Intel PXA is supported. To + enable this define CONFIG_MMC. The MMC can be + accessed from the boot prompt by mapping the device + to physical memory similar to flash. Command line is + enabled with CONFIG_CMD_MMC. The MMC driver also works with + the FAT fs. This is enabled with CONFIG_CMD_FAT. + +- Journaling Flash filesystem support: + CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, + CONFIG_JFFS2_NAND_DEV + Define these for a default partition on a NAND device + + CONFIG_SYS_JFFS2_FIRST_SECTOR, + CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS + Define these for a default partition on a NOR device + + CONFIG_SYS_JFFS_CUSTOM_PART + Define this to create an own partition. You have to provide a + function struct part_info* jffs2_part_info(int part_num) + + If you define only one JFFS2 partition you may also want to + #define CONFIG_SYS_JFFS_SINGLE_PART 1 + to disable the command chpart. This is the default when you + have not defined a custom partition + +- Keyboard Support: + CONFIG_ISA_KEYBOARD + + Define this to enable standard (PC-Style) keyboard + support + + CONFIG_I8042_KBD + Standard PC keyboard driver with US (is default) and + GERMAN key layout (switch via environment 'keymap=de') support. + Export function i8042_kbd_init, i8042_tstc and i8042_getc + for cfb_console. Supports cursor blinking. + +- Video support: + CONFIG_VIDEO + + Define this to enable video support (for output to + video). + + CONFIG_VIDEO_CT69000 + + Enable Chips & Technologies 69000 Video chip + + CONFIG_VIDEO_SMI_LYNXEM + Enable Silicon Motion SMI 712/710/810 Video chip. The + video output is selected via environment 'videoout' + (1 = LCD and 2 = CRT). If videoout is undefined, CRT is + assumed. + + For the CT69000 and SMI_LYNXEM drivers, videomode is + selected via environment 'videomode'. Two different ways + are possible: + - "videomode=num" 'num' is a standard LiLo mode numbers. + Following standard modes are supported (* is default): + + Colors 640x480 800x600 1024x768 1152x864 1280x1024 + -------------+--------------------------------------------- + 8 bits | 0x301* 0x303 0x305 0x161 0x307 + 15 bits | 0x310 0x313 0x316 0x162 0x319 + 16 bits | 0x311 0x314 0x317 0x163 0x31A + 24 bits | 0x312 0x315 0x318 ? 0x31B + -------------+--------------------------------------------- + (i.e. setenv videomode 317; saveenv; reset;) + + - "videomode=bootargs" all the video parameters are parsed + from the bootargs. (See drivers/video/videomodes.c) + + + CONFIG_VIDEO_SED13806 + Enable Epson SED13806 driver. This driver supports 8bpp + and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP + or CONFIG_VIDEO_SED13806_16BPP + +- Keyboard Support: + CONFIG_KEYBOARD + + Define this to enable a custom keyboard support. + This simply calls drv_keyboard_init() which must be + defined in your board-specific files. + The only board using this so far is RBC823. + +- LCD Support: CONFIG_LCD + + Define this to enable LCD support (for output to LCD + display); also select one of the supported displays + by defining one of these: + + CONFIG_ATMEL_LCD: + + HITACHI TX09D70VM1CCA, 3.5", 240x320. + + CONFIG_NEC_NL6448AC33: + + NEC NL6448AC33-18. Active, color, single scan. + + CONFIG_NEC_NL6448BC20 + + NEC NL6448BC20-08. 6.5", 640x480. + Active, color, single scan. + + CONFIG_NEC_NL6448BC33_54 + + NEC NL6448BC33-54. 10.4", 640x480. + Active, color, single scan. + + CONFIG_SHARP_16x9 + + Sharp 320x240. Active, color, single scan. + It isn't 16x9, and I am not sure what it is. + + CONFIG_SHARP_LQ64D341 + + Sharp LQ64D341 display, 640x480. + Active, color, single scan. + + CONFIG_HLD1045 + + HLD1045 display, 640x480. + Active, color, single scan. + + CONFIG_OPTREX_BW + + Optrex CBL50840-2 NF-FW 99 22 M5 + or + Hitachi LMG6912RPFC-00T + or + Hitachi SP14Q002 + + 320x240. Black & white. + + Normally display is black on white background; define + CONFIG_SYS_WHITE_ON_BLACK to get it inverted. + +- Splash Screen Support: CONFIG_SPLASH_SCREEN + + If this option is set, the environment is checked for + a variable "splashimage". If found, the usual display + of logo, copyright and system information on the LCD + is suppressed and the BMP image at the address + specified in "splashimage" is loaded instead. The + console is redirected to the "nulldev", too. This + allows for a "silent" boot where a splash screen is + loaded very quickly after power-on. + + CONFIG_SPLASH_SCREEN_ALIGN + + If this option is set the splash image can be freely positioned + on the screen. Environment variable "splashpos" specifies the + position as "x,y". If a positive number is given it is used as + number of pixel from left/top. If a negative number is given it + is used as number of pixel from right/bottom. You can also + specify 'm' for centering the image. + + Example: + setenv splashpos m,m + => image at center of screen + + setenv splashpos 30,20 + => image at x = 30 and y = 20 + + setenv splashpos -10,m + => vertically centered image + at x = dspWidth - bmpWidth - 9 + +- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP + + If this option is set, additionally to standard BMP + images, gzipped BMP images can be displayed via the + splashscreen support or the bmp command. + +- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8 + + If this option is set, 8-bit RLE compressed BMP images + can be displayed via the splashscreen support or the + bmp command. + +- Compression support: + CONFIG_BZIP2 + + If this option is set, support for bzip2 compressed + images is included. If not, only uncompressed and gzip + compressed images are supported. + + NOTE: the bzip2 algorithm requires a lot of RAM, so + the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should + be at least 4MB. + + CONFIG_LZMA + + If this option is set, support for lzma compressed + images is included. + + Note: The LZMA algorithm adds between 2 and 4KB of code and it + requires an amount of dynamic memory that is given by the + formula: + + (1846 + 768 << (lc + lp)) * sizeof(uint16) + + Where lc and lp stand for, respectively, Literal context bits + and Literal pos bits. + + This value is upper-bounded by 14MB in the worst case. Anyway, + for a ~4MB large kernel image, we have lc=3 and lp=0 for a + total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is + a very small buffer. + + Use the lzmainfo tool to determinate the lc and lp values and + then calculate the amount of needed dynamic memory (ensuring + the appropriate CONFIG_SYS_MALLOC_LEN value). + +- MII/PHY support: + CONFIG_PHY_ADDR + + The address of PHY on MII bus. + + CONFIG_PHY_CLOCK_FREQ (ppc4xx) + + The clock frequency of the MII bus + + CONFIG_PHY_GIGE + + If this option is set, support for speed/duplex + detection of gigabit PHY is included. + + CONFIG_PHY_RESET_DELAY + + Some PHY like Intel LXT971A need extra delay after + reset before any MII register access is possible. + For such PHY, set this option to the usec delay + required. (minimum 300usec for LXT971A) + + CONFIG_PHY_CMD_DELAY (ppc4xx) + + Some PHY like Intel LXT971A need extra delay after + command issued before MII status register can be read + +- Ethernet address: + CONFIG_ETHADDR + CONFIG_ETH1ADDR + CONFIG_ETH2ADDR + CONFIG_ETH3ADDR + CONFIG_ETH4ADDR + CONFIG_ETH5ADDR + + Define a default value for Ethernet address to use + for the respective Ethernet interface, in case this + is not determined automatically. + +- IP address: + CONFIG_IPADDR + + Define a default value for the IP address to use for + the default Ethernet interface, in case this is not + determined through e.g. bootp. + +- Server IP address: + CONFIG_SERVERIP + + Defines a default value for the IP address of a TFTP + server to contact when using the "tftboot" command. + + CONFIG_KEEP_SERVERADDR + + Keeps the server's MAC address, in the env 'serveraddr' + for passing to bootargs (like Linux's netconsole option) + +- Multicast TFTP Mode: + CONFIG_MCAST_TFTP + + Defines whether you want to support multicast TFTP as per + rfc-2090; for example to work with atftp. Lets lots of targets + tftp down the same boot image concurrently. Note: the Ethernet + driver in use must provide a function: mcast() to join/leave a + multicast group. + + CONFIG_BOOTP_RANDOM_DELAY +- BOOTP Recovery Mode: + CONFIG_BOOTP_RANDOM_DELAY + + If you have many targets in a network that try to + boot using BOOTP, you may want to avoid that all + systems send out BOOTP requests at precisely the same + moment (which would happen for instance at recovery + from a power failure, when all systems will try to + boot, thus flooding the BOOTP server. Defining + CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be + inserted before sending out BOOTP requests. The + following delays are inserted then: + + 1st BOOTP request: delay 0 ... 1 sec + 2nd BOOTP request: delay 0 ... 2 sec + 3rd BOOTP request: delay 0 ... 4 sec + 4th and following + BOOTP requests: delay 0 ... 8 sec + +- DHCP Advanced Options: + You can fine tune the DHCP functionality by defining + CONFIG_BOOTP_* symbols: + + CONFIG_BOOTP_SUBNETMASK + CONFIG_BOOTP_GATEWAY + CONFIG_BOOTP_HOSTNAME + CONFIG_BOOTP_NISDOMAIN + CONFIG_BOOTP_BOOTPATH + CONFIG_BOOTP_BOOTFILESIZE + CONFIG_BOOTP_DNS + CONFIG_BOOTP_DNS2 + CONFIG_BOOTP_SEND_HOSTNAME + CONFIG_BOOTP_NTPSERVER + CONFIG_BOOTP_TIMEOFFSET + CONFIG_BOOTP_VENDOREX + + CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip + environment variable, not the BOOTP server. + + CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS + serverip from a DHCP server, it is possible that more + than one DNS serverip is offered to the client. + If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS + serverip will be stored in the additional environment + variable "dnsip2". The first DNS serverip is always + stored in the variable "dnsip", when CONFIG_BOOTP_DNS + is defined. + + CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable + to do a dynamic update of a DNS server. To do this, they + need the hostname of the DHCP requester. + If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content + of the "hostname" environment variable is passed as + option 12 to the DHCP server. + + CONFIG_BOOTP_DHCP_REQUEST_DELAY + + A 32bit value in microseconds for a delay between + receiving a "DHCP Offer" and sending the "DHCP Request". + This fixes a problem with certain DHCP servers that don't + respond 100% of the time to a "DHCP request". E.g. On an + AT91RM9200 processor running at 180MHz, this delay needed + to be *at least* 15,000 usec before a Windows Server 2003 + DHCP server would reply 100% of the time. I recommend at + least 50,000 usec to be safe. The alternative is to hope + that one of the retries will be successful but note that + the DHCP timeout and retry process takes a longer than + this delay. + + - CDP Options: + CONFIG_CDP_DEVICE_ID + + The device id used in CDP trigger frames. + + CONFIG_CDP_DEVICE_ID_PREFIX + + A two character string which is prefixed to the MAC address + of the device. + + CONFIG_CDP_PORT_ID + + A printf format string which contains the ascii name of + the port. Normally is set to "eth%d" which sets + eth0 for the first Ethernet, eth1 for the second etc. + + CONFIG_CDP_CAPABILITIES + + A 32bit integer which indicates the device capabilities; + 0x00000010 for a normal host which does not forwards. + + CONFIG_CDP_VERSION + + An ascii string containing the version of the software. + + CONFIG_CDP_PLATFORM + + An ascii string containing the name of the platform. + + CONFIG_CDP_TRIGGER + + A 32bit integer sent on the trigger. + + CONFIG_CDP_POWER_CONSUMPTION + + A 16bit integer containing the power consumption of the + device in .1 of milliwatts. + + CONFIG_CDP_APPLIANCE_VLAN_TYPE + + A byte containing the id of the VLAN. + +- Status LED: CONFIG_STATUS_LED + + Several configurations allow to display the current + status using a LED. For instance, the LED will blink + fast while running U-Boot code, stop blinking as + soon as a reply to a BOOTP request was received, and + start blinking slow once the Linux kernel is running + (supported by a status LED driver in the Linux + kernel). Defining CONFIG_STATUS_LED enables this + feature in U-Boot. + +- CAN Support: CONFIG_CAN_DRIVER + + Defining CONFIG_CAN_DRIVER enables CAN driver support + on those systems that support this (optional) + feature, like the TQM8xxL modules. + +- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C + + These enable I2C serial bus commands. Defining either of + (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will + include the appropriate I2C driver for the selected CPU. + + This will allow you to use i2c commands at the u-boot + command line (as long as you set CONFIG_CMD_I2C in + CONFIG_COMMANDS) and communicate with i2c based realtime + clock chips. See common/cmd_i2c.c for a description of the + command line interface. + + CONFIG_HARD_I2C selects a hardware I2C controller. + + CONFIG_SOFT_I2C configures u-boot to use a software (aka + bit-banging) driver instead of CPM or similar hardware + support for I2C. + + There are several other quantities that must also be + defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C. + + In both cases you will need to define CONFIG_SYS_I2C_SPEED + to be the frequency (in Hz) at which you wish your i2c bus + to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie + the CPU's i2c node address). + + Now, the u-boot i2c code for the mpc8xx + (arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node + and so its address should therefore be cleared to 0 (See, + eg, MPC823e User's Manual p.16-473). So, set + CONFIG_SYS_I2C_SLAVE to 0. + + CONFIG_SYS_I2C_INIT_MPC5XXX + + When a board is reset during an i2c bus transfer + chips might think that the current transfer is still + in progress. Reset the slave devices by sending start + commands until the slave device responds. + + That's all that's required for CONFIG_HARD_I2C. + + If you use the software i2c interface (CONFIG_SOFT_I2C) + then the following macros need to be defined (examples are + from include/configs/lwmon.h): + + I2C_INIT + + (Optional). Any commands necessary to enable the I2C + controller or configure ports. + + eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) + + I2C_PORT + + (Only for MPC8260 CPU). The I/O port to use (the code + assumes both bits are on the same port). Valid values + are 0..3 for ports A..D. + + I2C_ACTIVE + + The code necessary to make the I2C data line active + (driven). If the data line is open collector, this + define can be null. + + eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) + + I2C_TRISTATE + + The code necessary to make the I2C data line tri-stated + (inactive). If the data line is open collector, this + define can be null. + + eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) + + I2C_READ + + Code that returns TRUE if the I2C data line is high, + FALSE if it is low. + + eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) + + I2C_SDA(bit) + + If <bit> is TRUE, sets the I2C data line high. If it + is FALSE, it clears it (low). + + eg: #define I2C_SDA(bit) \ + if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA + + I2C_SCL(bit) + + If <bit> is TRUE, sets the I2C clock line high. If it + is FALSE, it clears it (low). + + eg: #define I2C_SCL(bit) \ + if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL + + I2C_DELAY + + This delay is invoked four times per clock cycle so this + controls the rate of data transfer. The data rate thus + is 1 / (I2C_DELAY * 4). Often defined to be something + like: + + #define I2C_DELAY udelay(2) + + CONFIG_SYS_I2C_INIT_BOARD + + When a board is reset during an i2c bus transfer + chips might think that the current transfer is still + in progress. On some boards it is possible to access + the i2c SCLK line directly, either by using the + processor pin as a GPIO or by having a second pin + connected to the bus. If this option is defined a + custom i2c_init_board() routine in boards/xxx/board.c + is run early in the boot sequence. + + CONFIG_SYS_I2C_BOARD_LATE_INIT + + An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is + defined a custom i2c_board_late_init() routine in + boards/xxx/board.c is run AFTER the operations in i2c_init() + is completed. This callpoint can be used to unreset i2c bus + using CPU i2c controller register accesses for CPUs whose i2c + controller provide such a method. It is called at the end of + i2c_init() to allow i2c_init operations to setup the i2c bus + controller on the CPU (e.g. setting bus speed & slave address). + + CONFIG_I2CFAST (PPC405GP|PPC405EP only) + + This option enables configuration of bi_iic_fast[] flags + in u-boot bd_info structure based on u-boot environment + variable "i2cfast". (see also i2cfast) + + CONFIG_I2C_MULTI_BUS + + This option allows the use of multiple I2C buses, each of which + must have a controller. At any point in time, only one bus is + active. To switch to a different bus, use the 'i2c dev' command. + Note that bus numbering is zero-based. + + CONFIG_SYS_I2C_NOPROBES + + This option specifies a list of I2C devices that will be skipped + when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS + is set, specify a list of bus-device pairs. Otherwise, specify + a 1D array of device addresses + + e.g. + #undef CONFIG_I2C_MULTI_BUS + #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68} + + will skip addresses 0x50 and 0x68 on a board with one I2C bus + + #define CONFIG_I2C_MULTI_BUS + #define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} + + will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 + + CONFIG_SYS_SPD_BUS_NUM + + If defined, then this indicates the I2C bus number for DDR SPD. + If not defined, then U-Boot assumes that SPD is on I2C bus 0. + + CONFIG_SYS_RTC_BUS_NUM + + If defined, then this indicates the I2C bus number for the RTC. + If not defined, then U-Boot assumes that RTC is on I2C bus 0. + + CONFIG_SYS_DTT_BUS_NUM + + If defined, then this indicates the I2C bus number for the DTT. + If not defined, then U-Boot assumes that DTT is on I2C bus 0. + + CONFIG_SYS_I2C_DTT_ADDR: + + If defined, specifies the I2C address of the DTT device. + If not defined, then U-Boot uses predefined value for + specified DTT device. + + CONFIG_FSL_I2C + + Define this option if you want to use Freescale's I2C driver in + drivers/i2c/fsl_i2c.c. + + CONFIG_I2C_MUX + + Define this option if you have I2C devices reached over 1 .. n + I2C Muxes like the pca9544a. This option addes a new I2C + Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a + new I2C Bus to the existing I2C Busses. If you select the + new Bus with "i2c dev", u-bbot sends first the commandos for + the muxes to activate this new "bus". + + CONFIG_I2C_MULTI_BUS must be also defined, to use this + feature! + + Example: + Adding a new I2C Bus reached over 2 pca9544a muxes + The First mux with address 70 and channel 6 + The Second mux with address 71 and channel 4 + + => i2c bus pca9544a:70:6:pca9544a:71:4 + + Use the "i2c bus" command without parameter, to get a list + of I2C Busses with muxes: + + => i2c bus + Busses reached over muxes: + Bus ID: 2 + reached over Mux(es): + pca9544a@70 ch: 4 + Bus ID: 3 + reached over Mux(es): + pca9544a@70 ch: 6 + pca9544a@71 ch: 4 + => + + If you now switch to the new I2C Bus 3 with "i2c dev 3" + u-boot sends First the Commando to the mux@70 to enable + channel 6, and then the Commando to the mux@71 to enable + the channel 4. + + After that, you can use the "normal" i2c commands as + usual, to communicate with your I2C devices behind + the 2 muxes. + + This option is actually implemented for the bitbanging + algorithm in common/soft_i2c.c and for the Hardware I2C + Bus on the MPC8260. But it should be not so difficult + to add this option to other architectures. + + CONFIG_SOFT_I2C_READ_REPEATED_START + + defining this will force the i2c_read() function in + the soft_i2c driver to perform an I2C repeated start + between writing the address pointer and reading the + data. If this define is omitted the default behaviour + of doing a stop-start sequence will be used. Most I2C + devices can use either method, but some require one or + the other. + +- SPI Support: CONFIG_SPI + + Enables SPI driver (so far only tested with + SPI EEPROM, also an instance works with Crystal A/D and + D/As on the SACSng board) + + CONFIG_SPI_X + + Enables extended (16-bit) SPI EEPROM addressing. + (symmetrical to CONFIG_I2C_X) + + CONFIG_SOFT_SPI + + Enables a software (bit-bang) SPI driver rather than + using hardware support. This is a general purpose + driver that only requires three general I/O port pins + (two outputs, one input) to function. If this is + defined, the board configuration must define several + SPI configuration items (port pins to use, etc). For + an example, see include/configs/sacsng.h. + + CONFIG_HARD_SPI + + Enables a hardware SPI driver for general-purpose reads + and writes. As with CONFIG_SOFT_SPI, the board configuration + must define a list of chip-select function pointers. + Currently supported on some MPC8xxx processors. For an + example, see include/configs/mpc8349emds.h. + + CONFIG_MXC_SPI + + Enables the driver for the SPI controllers on i.MX and MXC + SoCs. Currently only i.MX31 is supported. + +- FPGA Support: CONFIG_FPGA + + Enables FPGA subsystem. + + CONFIG_FPGA_<vendor> + + Enables support for specific chip vendors. + (ALTERA, XILINX) + + CONFIG_FPGA_<family> + + Enables support for FPGA family. + (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX) + + CONFIG_FPGA_COUNT + + Specify the number of FPGA devices to support. + + CONFIG_SYS_FPGA_PROG_FEEDBACK + + Enable printing of hash marks during FPGA configuration. + + CONFIG_SYS_FPGA_CHECK_BUSY + + Enable checks on FPGA configuration interface busy + status by the configuration function. This option + will require a board or device specific function to + be written. + + CONFIG_FPGA_DELAY + + If defined, a function that provides delays in the FPGA + configuration driver. + + CONFIG_SYS_FPGA_CHECK_CTRLC + Allow Control-C to interrupt FPGA configuration + + CONFIG_SYS_FPGA_CHECK_ERROR + + Check for configuration errors during FPGA bitfile + loading. For example, abort during Virtex II + configuration if the INIT_B line goes low (which + indicated a CRC error). + + CONFIG_SYS_FPGA_WAIT_INIT + + Maximum time to wait for the INIT_B line to deassert + after PROB_B has been deasserted during a Virtex II + FPGA configuration sequence. The default time is 500 + ms. + + CONFIG_SYS_FPGA_WAIT_BUSY + + Maximum time to wait for BUSY to deassert during + Virtex II FPGA configuration. The default is 5 ms. + + CONFIG_SYS_FPGA_WAIT_CONFIG + + Time to wait after FPGA configuration. The default is + 200 ms. + +- Configuration Management: + CONFIG_IDENT_STRING + + If defined, this string will be added to the U-Boot + version information (U_BOOT_VERSION) + +- Vendor Parameter Protection: + + U-Boot considers the values of the environment + variables "serial#" (Board Serial Number) and + "ethaddr" (Ethernet Address) to be parameters that + are set once by the board vendor / manufacturer, and + protects these variables from casual modification by + the user. Once set, these variables are read-only, + and write or delete attempts are rejected. You can + change this behaviour: + + If CONFIG_ENV_OVERWRITE is #defined in your config + file, the write protection for vendor parameters is + completely disabled. Anybody can change or delete + these parameters. + + Alternatively, if you #define _both_ CONFIG_ETHADDR + _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default + Ethernet address is installed in the environment, + which can be changed exactly ONCE by the user. [The + serial# is unaffected by this, i. e. it remains + read-only.] + +- Protected RAM: + CONFIG_PRAM + + Define this variable to enable the reservation of + "protected RAM", i. e. RAM which is not overwritten + by U-Boot. Define CONFIG_PRAM to hold the number of + kB you want to reserve for pRAM. You can overwrite + this default value by defining an environment + variable "pram" to the number of kB you want to + reserve. Note that the board info structure will + still show the full amount of RAM. If pRAM is + reserved, a new environment variable "mem" will + automatically be defined to hold the amount of + remaining RAM in a form that can be passed as boot + argument to Linux, for instance like that: + + setenv bootargs ... mem=\${mem} + saveenv + + This way you can tell Linux not to use this memory, + either, which results in a memory region that will + not be affected by reboots. + + *WARNING* If your board configuration uses automatic + detection of the RAM size, you must make sure that + this memory test is non-destructive. So far, the + following board configurations are known to be + "pRAM-clean": + + ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL, + HERMES, IP860, RPXlite, LWMON, LANTEC, + PCU_E, FLAGADM, TQM8260 + +- Error Recovery: + CONFIG_PANIC_HANG + + Define this variable to stop the system in case of a + fatal error, so that you have to reset it manually. + This is probably NOT a good idea for an embedded + system where you want the system to reboot + automatically as fast as possible, but it may be + useful during development since you can try to debug + the conditions that lead to the situation. + + CONFIG_NET_RETRY_COUNT + + This variable defines the number of retries for + network operations like ARP, RARP, TFTP, or BOOTP + before giving up the operation. If not defined, a + default value of 5 is used. + + CONFIG_ARP_TIMEOUT + + Timeout waiting for an ARP reply in milliseconds. + +- Command Interpreter: + CONFIG_AUTO_COMPLETE + + Enable auto completion of commands using TAB. + + Note that this feature has NOT been implemented yet + for the "hush" shell. + + + CONFIG_SYS_HUSH_PARSER + + Define this variable to enable the "hush" shell (from + Busybox) as command line interpreter, thus enabling + powerful command line syntax like + if...then...else...fi conditionals or `&&' and '||' + constructs ("shell scripts"). + + If undefined, you get the old, much simpler behaviour + with a somewhat smaller memory footprint. + + + CONFIG_SYS_PROMPT_HUSH_PS2 + + This defines the secondary prompt string, which is + printed when the command interpreter needs more input + to complete a command. Usually "> ". + + Note: + + In the current implementation, the local variables + space and global environment variables space are + separated. Local variables are those you define by + simply typing `name=value'. To access a local + variable later on, you have write `$name' or + `${name}'; to execute the contents of a variable + directly type `$name' at the command prompt. + + Global environment variables are those you use + setenv/printenv to work with. To run a command stored + in such a variable, you need to use the run command, + and you must not use the '$' sign to access them. + + To store commands and special characters in a + variable, please use double quotation marks + surrounding the whole text of the variable, instead + of the backslashes before semicolons and special + symbols. + +- Commandline Editing and History: + CONFIG_CMDLINE_EDITING + + Enable editing and History functions for interactive + commandline input operations + +- Default Environment: + CONFIG_EXTRA_ENV_SETTINGS + + Define this to contain any number of null terminated + strings (variable = value pairs) that will be part of + the default environment compiled into the boot image. + + For example, place something like this in your + board's config file: + + #define CONFIG_EXTRA_ENV_SETTINGS \ + "myvar1=value1\0" \ + "myvar2=value2\0" + + Warning: This method is based on knowledge about the + internal format how the environment is stored by the + U-Boot code. This is NOT an official, exported + interface! Although it is unlikely that this format + will change soon, there is no guarantee either. + You better know what you are doing here. + + Note: overly (ab)use of the default environment is + discouraged. Make sure to check other ways to preset + the environment like the "source" command or the + boot command first. + +- DataFlash Support: + CONFIG_HAS_DATAFLASH + + Defining this option enables DataFlash features and + allows to read/write in Dataflash via the standard + commands cp, md... + +- SystemACE Support: + CONFIG_SYSTEMACE + + Adding this option adds support for Xilinx SystemACE + chips attached via some sort of local bus. The address + of the chip must also be defined in the + CONFIG_SYS_SYSTEMACE_BASE macro. For example: + + #define CONFIG_SYSTEMACE + #define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000 + + When SystemACE support is added, the "ace" device type + becomes available to the fat commands, i.e. fatls. + +- TFTP Fixed UDP Port: + CONFIG_TFTP_PORT + + If this is defined, the environment variable tftpsrcp + is used to supply the TFTP UDP source port value. + If tftpsrcp isn't defined, the normal pseudo-random port + number generator is used. + + Also, the environment variable tftpdstp is used to supply + the TFTP UDP destination port value. If tftpdstp isn't + defined, the normal port 69 is used. + + The purpose for tftpsrcp is to allow a TFTP server to + blindly start the TFTP transfer using the pre-configured + target IP address and UDP port. This has the effect of + "punching through" the (Windows XP) firewall, allowing + the remainder of the TFTP transfer to proceed normally. + A better solution is to properly configure the firewall, + but sometimes that is not allowed. + +- Show boot progress: + CONFIG_SHOW_BOOT_PROGRESS + + Defining this option allows to add some board- + specific code (calling a user-provided function + "show_boot_progress(int)") that enables you to show + the system's boot progress on some display (for + example, some LED's) on your board. At the moment, + the following checkpoints are implemented: + +Legacy uImage format: + + Arg Where When + 1 common/cmd_bootm.c before attempting to boot an image + -1 common/cmd_bootm.c Image header has bad magic number + 2 common/cmd_bootm.c Image header has correct magic number + -2 common/cmd_bootm.c Image header has bad checksum + 3 common/cmd_bootm.c Image header has correct checksum + -3 common/cmd_bootm.c Image data has bad checksum + 4 common/cmd_bootm.c Image data has correct checksum + -4 common/cmd_bootm.c Image is for unsupported architecture + 5 common/cmd_bootm.c Architecture check OK + -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) + 6 common/cmd_bootm.c Image Type check OK + -6 common/cmd_bootm.c gunzip uncompression error + -7 common/cmd_bootm.c Unimplemented compression type + 7 common/cmd_bootm.c Uncompression OK + 8 common/cmd_bootm.c No uncompress/copy overwrite error + -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) + + 9 common/image.c Start initial ramdisk verification + -10 common/image.c Ramdisk header has bad magic number + -11 common/image.c Ramdisk header has bad checksum + 10 common/image.c Ramdisk header is OK + -12 common/image.c Ramdisk data has bad checksum + 11 common/image.c Ramdisk data has correct checksum + 12 common/image.c Ramdisk verification complete, start loading + -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) + 13 common/image.c Start multifile image verification + 14 common/image.c No initial ramdisk, no multifile, continue. + + 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS + + -30 arch/powerpc/lib/board.c Fatal error, hang the system + -31 post/post.c POST test failed, detected by post_output_backlog() + -32 post/post.c POST test failed, detected by post_run_single() + + 34 common/cmd_doc.c before loading a Image from a DOC device + -35 common/cmd_doc.c Bad usage of "doc" command + 35 common/cmd_doc.c correct usage of "doc" command + -36 common/cmd_doc.c No boot device + 36 common/cmd_doc.c correct boot device + -37 common/cmd_doc.c Unknown Chip ID on boot device + 37 common/cmd_doc.c correct chip ID found, device available + -38 common/cmd_doc.c Read Error on boot device + 38 common/cmd_doc.c reading Image header from DOC device OK + -39 common/cmd_doc.c Image header has bad magic number + 39 common/cmd_doc.c Image header has correct magic number + -40 common/cmd_doc.c Error reading Image from DOC device + 40 common/cmd_doc.c Image header has correct magic number + 41 common/cmd_ide.c before loading a Image from a IDE device + -42 common/cmd_ide.c Bad usage of "ide" command + 42 common/cmd_ide.c correct usage of "ide" command + -43 common/cmd_ide.c No boot device + 43 common/cmd_ide.c boot device found + -44 common/cmd_ide.c Device not available + 44 common/cmd_ide.c Device available + -45 common/cmd_ide.c wrong partition selected + 45 common/cmd_ide.c partition selected + -46 common/cmd_ide.c Unknown partition table + 46 common/cmd_ide.c valid partition table found + -47 common/cmd_ide.c Invalid partition type + 47 common/cmd_ide.c correct partition type + -48 common/cmd_ide.c Error reading Image Header on boot device + 48 common/cmd_ide.c reading Image Header from IDE device OK + -49 common/cmd_ide.c Image header has bad magic number + 49 common/cmd_ide.c Image header has correct magic number + -50 common/cmd_ide.c Image header has bad checksum + 50 common/cmd_ide.c Image header has correct checksum + -51 common/cmd_ide.c Error reading Image from IDE device + 51 common/cmd_ide.c reading Image from IDE device OK + 52 common/cmd_nand.c before loading a Image from a NAND device + -53 common/cmd_nand.c Bad usage of "nand" command + 53 common/cmd_nand.c correct usage of "nand" command + -54 common/cmd_nand.c No boot device + 54 common/cmd_nand.c boot device found + -55 common/cmd_nand.c Unknown Chip ID on boot device + 55 common/cmd_nand.c correct chip ID found, device available + -56 common/cmd_nand.c Error reading Image Header on boot device + 56 common/cmd_nand.c reading Image Header from NAND device OK + -57 common/cmd_nand.c Image header has bad magic number + 57 common/cmd_nand.c Image header has correct magic number + -58 common/cmd_nand.c Error reading Image from NAND device + 58 common/cmd_nand.c reading Image from NAND device OK + + -60 common/env_common.c Environment has a bad CRC, using default + + 64 net/eth.c starting with Ethernet configuration. + -64 net/eth.c no Ethernet found. + 65 net/eth.c Ethernet found. + + -80 common/cmd_net.c usage wrong + 80 common/cmd_net.c before calling NetLoop() + -81 common/cmd_net.c some error in NetLoop() occurred + 81 common/cmd_net.c NetLoop() back without error + -82 common/cmd_net.c size == 0 (File with size 0 loaded) + 82 common/cmd_net.c trying automatic boot + 83 common/cmd_net.c running "source" command + -83 common/cmd_net.c some error in automatic boot or "source" command + 84 common/cmd_net.c end without errors + +FIT uImage format: + + Arg Where When + 100 common/cmd_bootm.c Kernel FIT Image has correct format + -100 common/cmd_bootm.c Kernel FIT Image has incorrect format + 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration + -101 common/cmd_bootm.c Can't get configuration for kernel subimage + 102 common/cmd_bootm.c Kernel unit name specified + -103 common/cmd_bootm.c Can't get kernel subimage node offset + 103 common/cmd_bootm.c Found configuration node + 104 common/cmd_bootm.c Got kernel subimage node offset + -104 common/cmd_bootm.c Kernel subimage hash verification failed + 105 common/cmd_bootm.c Kernel subimage hash verification OK + -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture + 106 common/cmd_bootm.c Architecture check OK + -106 common/cmd_bootm.c Kernel subimage has wrong type + 107 common/cmd_bootm.c Kernel subimage type OK + -107 common/cmd_bootm.c Can't get kernel subimage data/size + 108 common/cmd_bootm.c Got kernel subimage data/size + -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) + -109 common/cmd_bootm.c Can't get kernel subimage type + -110 common/cmd_bootm.c Can't get kernel subimage comp + -111 common/cmd_bootm.c Can't get kernel subimage os + -112 common/cmd_bootm.c Can't get kernel subimage load address + -113 common/cmd_bootm.c Image uncompress/copy overwrite error + + 120 common/image.c Start initial ramdisk verification + -120 common/image.c Ramdisk FIT image has incorrect format + 121 common/image.c Ramdisk FIT image has correct format + 122 common/image.c No ramdisk subimage unit name, using configuration + -122 common/image.c Can't get configuration for ramdisk subimage + 123 common/image.c Ramdisk unit name specified + -124 common/image.c Can't get ramdisk subimage node offset + 125 common/image.c Got ramdisk subimage node offset + -125 common/image.c Ramdisk subimage hash verification failed + 126 common/image.c Ramdisk subimage hash verification OK + -126 common/image.c Ramdisk subimage for unsupported architecture + 127 common/image.c Architecture check OK + -127 common/image.c Can't get ramdisk subimage data/size + 128 common/image.c Got ramdisk subimage data/size + 129 common/image.c Can't get ramdisk load address + -129 common/image.c Got ramdisk load address + + -130 common/cmd_doc.c Incorrect FIT image format + 131 common/cmd_doc.c FIT image format OK + + -140 common/cmd_ide.c Incorrect FIT image format + 141 common/cmd_ide.c FIT image format OK + + -150 common/cmd_nand.c Incorrect FIT image format + 151 common/cmd_nand.c FIT image format OK + +- Automatic software updates via TFTP server + CONFIG_UPDATE_TFTP + CONFIG_UPDATE_TFTP_CNT_MAX + CONFIG_UPDATE_TFTP_MSEC_MAX + + These options enable and control the auto-update feature; + for a more detailed description refer to doc/README.update. + +- MTD Support (mtdparts command, UBI support) + CONFIG_MTD_DEVICE + + Adds the MTD device infrastructure from the Linux kernel. + Needed for mtdparts command support. + + CONFIG_MTD_PARTITIONS + + Adds the MTD partitioning infrastructure from the Linux + kernel. Needed for UBI support. + + +Modem Support: +-------------- + +[so far only for SMDK2400 and TRAB boards] + +- Modem support enable: + CONFIG_MODEM_SUPPORT + +- RTS/CTS Flow control enable: + CONFIG_HWFLOW + +- Modem debug support: + CONFIG_MODEM_SUPPORT_DEBUG + + Enables debugging stuff (char screen[1024], dbg()) + for modem support. Useful only with BDI2000. + +- Interrupt support (PPC): + + There are common interrupt_init() and timer_interrupt() + for all PPC archs. interrupt_init() calls interrupt_init_cpu() + for CPU specific initialization. interrupt_init_cpu() + should set decrementer_count to appropriate value. If + CPU resets decrementer automatically after interrupt + (ppc4xx) it should set decrementer_count to zero. + timer_interrupt() calls timer_interrupt_cpu() for CPU + specific handling. If board has watchdog / status_led + / other_activity_monitor it works automatically from + general timer_interrupt(). + +- General: + + In the target system modem support is enabled when a + specific key (key combination) is pressed during + power-on. Otherwise U-Boot will boot normally + (autoboot). The key_pressed() function is called from + board_init(). Currently key_pressed() is a dummy + function, returning 1 and thus enabling modem + initialization. + + If there are no modem init strings in the + environment, U-Boot proceed to autoboot; the + previous output (banner, info printfs) will be + suppressed, though. + + See also: doc/README.Modem + + +Configuration Settings: +----------------------- + +- CONFIG_SYS_LONGHELP: Defined when you want long help messages included; + undefine this when you're short of memory. + +- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default + width of the commands listed in the 'help' command output. + +- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to + prompt for user input. + +- CONFIG_SYS_CBSIZE: Buffer size for input from the Console + +- CONFIG_SYS_PBSIZE: Buffer size for Console output + +- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands + +- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to + the application (usually a Linux kernel) when it is + booted + +- CONFIG_SYS_BAUDRATE_TABLE: + List of legal baudrate settings for this board. + +- CONFIG_SYS_CONSOLE_INFO_QUIET + Suppress display of console information at boot. + +- CONFIG_SYS_CONSOLE_IS_IN_ENV + If the board specific function + extern int overwrite_console (void); + returns 1, the stdin, stderr and stdout are switched to the + serial port, else the settings in the environment are used. + +- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE + Enable the call to overwrite_console(). + +- CONFIG_SYS_CONSOLE_ENV_OVERWRITE + Enable overwrite of previous console environment settings. + +- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END: + Begin and End addresses of the area used by the + simple memory test. + +- CONFIG_SYS_ALT_MEMTEST: + Enable an alternate, more extensive memory test. + +- CONFIG_SYS_MEMTEST_SCRATCH: + Scratch address used by the alternate memory test + You only need to set this if address zero isn't writeable + +- CONFIG_SYS_MEM_TOP_HIDE (PPC only): + If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header, + this specified memory area will get subtracted from the top + (end) of RAM and won't get "touched" at all by U-Boot. By + fixing up gd->ram_size the Linux kernel should gets passed + the now "corrected" memory size and won't touch it either. + This should work for arch/ppc and arch/powerpc. Only Linux + board ports in arch/powerpc with bootwrapper support that + recalculate the memory size from the SDRAM controller setup + will have to get fixed in Linux additionally. + + This option can be used as a workaround for the 440EPx/GRx + CHIP 11 errata where the last 256 bytes in SDRAM shouldn't + be touched. + + WARNING: Please make sure that this value is a multiple of + the Linux page size (normally 4k). If this is not the case, + then the end address of the Linux memory will be located at a + non page size aligned address and this could cause major + problems. + +- CONFIG_SYS_TFTP_LOADADDR: + Default load address for network file downloads + +- CONFIG_SYS_LOADS_BAUD_CHANGE: + Enable temporary baudrate change while serial download + +- CONFIG_SYS_SDRAM_BASE: + Physical start address of SDRAM. _Must_ be 0 here. + +- CONFIG_SYS_MBIO_BASE: + Physical start address of Motherboard I/O (if using a + Cogent motherboard) + +- CONFIG_SYS_FLASH_BASE: + Physical start address of Flash memory. + +- CONFIG_SYS_MONITOR_BASE: + Physical start address of boot monitor code (set by + make config files to be same as the text base address + (TEXT_BASE) used when linking) - same as + CONFIG_SYS_FLASH_BASE when booting from flash. + +- CONFIG_SYS_MONITOR_LEN: + Size of memory reserved for monitor code, used to + determine _at_compile_time_ (!) if the environment is + embedded within the U-Boot image, or in a separate + flash sector. + +- CONFIG_SYS_MALLOC_LEN: + Size of DRAM reserved for malloc() use. + +- CONFIG_SYS_BOOTM_LEN: + Normally compressed uImages are limited to an + uncompressed size of 8 MBytes. If this is not enough, + you can define CONFIG_SYS_BOOTM_LEN in your board config file + to adjust this setting to your needs. + +- CONFIG_SYS_BOOTMAPSZ: + Maximum size of memory mapped by the startup code of + the Linux kernel; all data that must be processed by + the Linux kernel (bd_info, boot arguments, FDT blob if + used) must be put below this limit, unless "bootm_low" + enviroment variable is defined and non-zero. In such case + all data for the Linux kernel must be between "bootm_low" + and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. + +- CONFIG_SYS_MAX_FLASH_BANKS: + Max number of Flash memory banks + +- CONFIG_SYS_MAX_FLASH_SECT: + Max number of sectors on a Flash chip + +- CONFIG_SYS_FLASH_ERASE_TOUT: + Timeout for Flash erase operations (in ms) + +- CONFIG_SYS_FLASH_WRITE_TOUT: + Timeout for Flash write operations (in ms) + +- CONFIG_SYS_FLASH_LOCK_TOUT + Timeout for Flash set sector lock bit operation (in ms) + +- CONFIG_SYS_FLASH_UNLOCK_TOUT + Timeout for Flash clear lock bits operation (in ms) + +- CONFIG_SYS_FLASH_PROTECTION + If defined, hardware flash sectors protection is used + instead of U-Boot software protection. + +- CONFIG_SYS_DIRECT_FLASH_TFTP: + + Enable TFTP transfers directly to flash memory; + without this option such a download has to be + performed in two steps: (1) download to RAM, and (2) + copy from RAM to flash. + + The two-step approach is usually more reliable, since + you can check if the download worked before you erase + the flash, but in some situations (when system RAM is + too limited to allow for a temporary copy of the + downloaded image) this option may be very useful. + +- CONFIG_SYS_FLASH_CFI: + Define if the flash driver uses extra elements in the + common flash structure for storing flash geometry. + +- CONFIG_FLASH_CFI_DRIVER + This option also enables the building of the cfi_flash driver + in the drivers directory + +- CONFIG_FLASH_CFI_MTD + This option enables the building of the cfi_mtd driver + in the drivers directory. The driver exports CFI flash + to the MTD layer. + +- CONFIG_SYS_FLASH_USE_BUFFER_WRITE + Use buffered writes to flash. + +- CONFIG_FLASH_SPANSION_S29WS_N + s29ws-n MirrorBit flash has non-standard addresses for buffered + write commands. + +- CONFIG_SYS_FLASH_QUIET_TEST + If this option is defined, the common CFI flash doesn't + print it's warning upon not recognized FLASH banks. This + is useful, if some of the configured banks are only + optionally available. + +- CONFIG_FLASH_SHOW_PROGRESS + If defined (must be an integer), print out countdown + digits and dots. Recommended value: 45 (9..1) for 80 + column displays, 15 (3..1) for 40 column displays. + +- CONFIG_SYS_RX_ETH_BUFFER: + Defines the number of Ethernet receive buffers. On some + Ethernet controllers it is recommended to set this value + to 8 or even higher (EEPRO100 or 405 EMAC), since all + buffers can be full shortly after enabling the interface + on high Ethernet traffic. + Defaults to 4 if not defined. + +The following definitions that deal with the placement and management +of environment data (variable area); in general, we support the +following configurations: + +- CONFIG_ENV_IS_IN_FLASH: + + Define this if the environment is in flash memory. + + a) The environment occupies one whole flash sector, which is + "embedded" in the text segment with the U-Boot code. This + happens usually with "bottom boot sector" or "top boot + sector" type flash chips, which have several smaller + sectors at the start or the end. For instance, such a + layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In + such a case you would place the environment in one of the + 4 kB sectors - with U-Boot code before and after it. With + "top boot sector" type flash chips, you would put the + environment in one of the last sectors, leaving a gap + between U-Boot and the environment. + + - CONFIG_ENV_OFFSET: + + Offset of environment data (variable area) to the + beginning of flash memory; for instance, with bottom boot + type flash chips the second sector can be used: the offset + for this sector is given here. + + CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. + + - CONFIG_ENV_ADDR: + + This is just another way to specify the start address of + the flash sector containing the environment (instead of + CONFIG_ENV_OFFSET). + + - CONFIG_ENV_SECT_SIZE: + + Size of the sector containing the environment. + + + b) Sometimes flash chips have few, equal sized, BIG sectors. + In such a case you don't want to spend a whole sector for + the environment. + + - CONFIG_ENV_SIZE: + + If you use this in combination with CONFIG_ENV_IS_IN_FLASH + and CONFIG_ENV_SECT_SIZE, you can specify to use only a part + of this flash sector for the environment. This saves + memory for the RAM copy of the environment. + + It may also save flash memory if you decide to use this + when your environment is "embedded" within U-Boot code, + since then the remainder of the flash sector could be used + for U-Boot code. It should be pointed out that this is + STRONGLY DISCOURAGED from a robustness point of view: + updating the environment in flash makes it always + necessary to erase the WHOLE sector. If something goes + wrong before the contents has been restored from a copy in + RAM, your target system will be dead. + + - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND + + These settings describe a second storage area used to hold + a redundant copy of the environment data, so that there is + a valid backup copy in case there is a power failure during + a "saveenv" operation. + +BE CAREFUL! Any changes to the flash layout, and some changes to the +source code will make it necessary to adapt <board>/u-boot.lds* +accordingly! + + +- CONFIG_ENV_IS_IN_NVRAM: + + Define this if you have some non-volatile memory device + (NVRAM, battery buffered SRAM) which you want to use for the + environment. + + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These two #defines are used to determine the memory area you + want to use for environment. It is assumed that this memory + can just be read and written to, without any special + provision. + +BE CAREFUL! The first access to the environment happens quite early +in U-Boot initalization (when we try to get the setting of for the +console baudrate). You *MUST* have mapped your NVRAM area then, or +U-Boot will hang. + +Please note that even with NVRAM we still use a copy of the +environment in RAM: we could work on NVRAM directly, but we want to +keep settings there always unmodified except somebody uses "saveenv" +to save the current settings. + + +- CONFIG_ENV_IS_IN_EEPROM: + + Use this if you have an EEPROM or similar serial access + device and a driver for it. + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_SIZE: + + These two #defines specify the offset and size of the + environment area within the total memory of your EEPROM. + + - CONFIG_SYS_I2C_EEPROM_ADDR: + If defined, specified the chip address of the EEPROM device. + The default address is zero. + + - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: + If defined, the number of bits used to address bytes in a + single page in the EEPROM device. A 64 byte page, for example + would require six bits. + + - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: + If defined, the number of milliseconds to delay between + page writes. The default is zero milliseconds. + + - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: + The length in bytes of the EEPROM memory array address. Note + that this is NOT the chip address length! + + - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: + EEPROM chips that implement "address overflow" are ones + like Catalyst 24WC04/08/16 which has 9/10/11 bits of + address and the extra bits end up in the "chip address" bit + slots. This makes a 24WC08 (1Kbyte) chip look like four 256 + byte chips. + + Note that we consider the length of the address field to + still be one byte because the extra address bits are hidden + in the chip address. + + - CONFIG_SYS_EEPROM_SIZE: + The size in bytes of the EEPROM device. + + - CONFIG_ENV_EEPROM_IS_ON_I2C + define this, if you have I2C and SPI activated, and your + EEPROM, which holds the environment, is on the I2C bus. + + - CONFIG_I2C_ENV_EEPROM_BUS + if you have an Environment on an EEPROM reached over + I2C muxes, you can define here, how to reach this + EEPROM. For example: + + #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" + + EEPROM which holds the environment, is reached over + a pca9547 i2c mux with address 0x70, channel 3. + +- CONFIG_ENV_IS_IN_DATAFLASH: + + Define this if you have a DataFlash memory device which you + want to use for the environment. + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These three #defines specify the offset and size of the + environment area within the total memory of your DataFlash placed + at the specified address. + +- CONFIG_ENV_IS_IN_NAND: + + Define this if you have a NAND device which you want to use + for the environment. + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_SIZE: + + These two #defines specify the offset and size of the environment + area within the first NAND device. + + - CONFIG_ENV_OFFSET_REDUND + + This setting describes a second storage area of CONFIG_ENV_SIZE + size used to hold a redundant copy of the environment data, + so that there is a valid backup copy in case there is a + power failure during a "saveenv" operation. + + Note: CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND must be aligned + to a block boundary, and CONFIG_ENV_SIZE must be a multiple of + the NAND devices block size. + +- CONFIG_NAND_ENV_DST + + Defines address in RAM to which the nand_spl code should copy the + environment. If redundant environment is used, it will be copied to + CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. + +- CONFIG_SYS_SPI_INIT_OFFSET + + Defines offset to the initial SPI buffer area in DPRAM. The + area is used at an early stage (ROM part) if the environment + is configured to reside in the SPI EEPROM: We need a 520 byte + scratch DPRAM area. It is used between the two initialization + calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems + to be a good choice since it makes it far enough from the + start of the data area as well as from the stack pointer. + +Please note that the environment is read-only until the monitor +has been relocated to RAM and a RAM copy of the environment has been +created; also, when using EEPROM you will have to use getenv_r() +until then to read environment variables. + +The environment is protected by a CRC32 checksum. Before the monitor +is relocated into RAM, as a result of a bad CRC you will be working +with the compiled-in default environment - *silently*!!! [This is +necessary, because the first environment variable we need is the +"baudrate" setting for the console - if we have a bad CRC, we don't +have any device yet where we could complain.] + +Note: once the monitor has been relocated, then it will complain if +the default environment is used; a new CRC is computed as soon as you +use the "saveenv" command to store a valid environment. + +- CONFIG_SYS_FAULT_ECHO_LINK_DOWN: + Echo the inverted Ethernet link state to the fault LED. + + Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR + also needs to be defined. + +- CONFIG_SYS_FAULT_MII_ADDR: + MII address of the PHY to check for the Ethernet link state. + +- CONFIG_NS16550_MIN_FUNCTIONS: + Define this if you desire to only have use of the NS16550_init + and NS16550_putc functions for the serial driver located at + drivers/serial/ns16550.c. This option is useful for saving + space for already greatly restricted images, including but not + limited to NAND_SPL configurations. + +Low Level (hardware related) configuration options: +--------------------------------------------------- + +- CONFIG_SYS_CACHELINE_SIZE: + Cache Line Size of the CPU. + +- CONFIG_SYS_DEFAULT_IMMR: + Default address of the IMMR after system reset. + + Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, + and RPXsuper) to be able to adjust the position of + the IMMR register after a reset. + +- Floppy Disk Support: + CONFIG_SYS_FDC_DRIVE_NUMBER + + the default drive number (default value 0) + + CONFIG_SYS_ISA_IO_STRIDE + + defines the spacing between FDC chipset registers + (default value 1) + + CONFIG_SYS_ISA_IO_OFFSET + + defines the offset of register from address. It + depends on which part of the data bus is connected to + the FDC chipset. (default value 0) + + If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and + CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their + default value. + + if CONFIG_SYS_FDC_HW_INIT is defined, then the function + fdc_hw_init() is called at the beginning of the FDC + setup. fdc_hw_init() must be provided by the board + source code. It is used to make hardware dependant + initializations. + +- CONFIG_SYS_IMMR: Physical address of the Internal Memory. + DO NOT CHANGE unless you know exactly what you're + doing! (11-4) [MPC8xx/82xx systems only] + +- CONFIG_SYS_INIT_RAM_ADDR: + + Start address of memory area that can be used for + initial data and stack; please note that this must be + writable memory that is working WITHOUT special + initialization, i. e. you CANNOT use normal RAM which + will become available only after programming the + memory controller and running certain initialization + sequences. + + U-Boot uses the following memory types: + - MPC8xx and MPC8260: IMMR (internal memory of the CPU) + - MPC824X: data cache + - PPC4xx: data cache + +- CONFIG_SYS_GBL_DATA_OFFSET: + + Offset of the initial data structure in the memory + area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually + CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial + data is located at the end of the available space + (sometimes written as (CONFIG_SYS_INIT_RAM_END - + CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just + below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + + CONFIG_SYS_GBL_DATA_OFFSET) downward. + + Note: + On the MPC824X (or other systems that use the data + cache for initial memory) the address chosen for + CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must + point to an otherwise UNUSED address space between + the top of RAM and the start of the PCI space. + +- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6) + +- CONFIG_SYS_SYPCR: System Protection Control (11-9) + +- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26) + +- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31) + +- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) + +- CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) + +- CONFIG_SYS_OR_TIMING_SDRAM: + SDRAM timing + +- CONFIG_SYS_MAMR_PTA: + periodic timer for refresh + +- CONFIG_SYS_DER: Debug Event Register (37-47) + +- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, + CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, + CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, + CONFIG_SYS_BR1_PRELIM: + Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) + +- SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, + CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM, + CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: + Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) + +- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K, + CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL: + Machine Mode Register and Memory Periodic Timer + Prescaler definitions (SDRAM timing) + +- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]: + enable I2C microcode relocation patch (MPC8xx); + define relocation offset in DPRAM [DSP2] + +- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]: + enable SMC microcode relocation patch (MPC8xx); + define relocation offset in DPRAM [SMC1] + +- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]: + enable SPI microcode relocation patch (MPC8xx); + define relocation offset in DPRAM [SCC4] + +- CONFIG_SYS_USE_OSCCLK: + Use OSCM clock mode on MBX8xx board. Be careful, + wrong setting might damage your board. Read + doc/README.MBX before setting this variable! + +- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) + Offset of the bootmode word in DPRAM used by post + (Power On Self Tests). This definition overrides + #define'd default value in commproc.h resp. + cpm_8260.h. + +- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB, + CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL, + CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS, + CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB, + CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, + CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, + CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) + Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set. + +- CONFIG_PCI_DISABLE_PCIE: + Disable PCI-Express on systems where it is supported but not + required. + +- CONFIG_SPD_EEPROM + Get DDR timing information from an I2C EEPROM. Common + with pluggable memory modules such as SODIMMs + + SPD_EEPROM_ADDRESS + I2C address of the SPD EEPROM + +- CONFIG_SYS_SPD_BUS_NUM + If SPD EEPROM is on an I2C bus other than the first + one, specify here. Note that the value must resolve + to something your driver can deal with. + +- CONFIG_SYS_83XX_DDR_USES_CS0 + Only for 83xx systems. If specified, then DDR should + be configured using CS0 and CS1 instead of CS2 and CS3. + +- CONFIG_ETHER_ON_FEC[12] + Define to enable FEC[12] on a 8xx series processor. + +- CONFIG_FEC[12]_PHY + Define to the hardcoded PHY address which corresponds + to the given FEC; i. e. + #define CONFIG_FEC1_PHY 4 + means that the PHY with address 4 is connected to FEC1 + + When set to -1, means to probe for first available. + +- CONFIG_FEC[12]_PHY_NORXERR + The PHY does not have a RXERR line (RMII only). + (so program the FEC to ignore it). + +- CONFIG_RMII + Enable RMII mode for all FECs. + Note that this is a global option, we can't + have one FEC in standard MII mode and another in RMII mode. + +- CONFIG_CRC32_VERIFY + Add a verify option to the crc32 command. + The syntax is: + + => crc32 -v <address> <count> <crc32> + + Where address/count indicate a memory area + and crc32 is the correct crc32 which the + area should have. + +- CONFIG_LOOPW + Add the "loopw" memory command. This only takes effect if + the memory commands are activated globally (CONFIG_CMD_MEM). + +- CONFIG_MX_CYCLIC + Add the "mdc" and "mwc" memory commands. These are cyclic + "md/mw" commands. + Examples: + + => mdc.b 10 4 500 + This command will print 4 bytes (10,11,12,13) each 500 ms. + + => mwc.l 100 12345678 10 + This command will write 12345678 to address 100 all 10 ms. + + This only takes effect if the memory commands are activated + globally (CONFIG_CMD_MEM). + +- CONFIG_SKIP_LOWLEVEL_INIT +- CONFIG_SKIP_RELOCATE_UBOOT + + [ARM only] If these variables are defined, then + certain low level initializations (like setting up + the memory controller) are omitted and/or U-Boot does + not relocate itself into RAM. + Normally these variables MUST NOT be defined. The + only exception is when U-Boot is loaded (to RAM) by + some other boot loader or by a debugger which + performs these initializations itself. + +- CONFIG_PRELOADER + + Modifies the behaviour of start.S when compiling a loader + that is executed before the actual U-Boot. E.g. when + compiling a NAND SPL. + +Building the Software: +====================== + +Building U-Boot has been tested in several native build environments +and in many different cross environments. Of course we cannot support +all possibly existing versions of cross development tools in all +(potentially obsolete) versions. In case of tool chain problems we +recommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) +which is extensively used to build and test U-Boot. + +If you are not using a native environment, it is assumed that you +have GNU cross compiling tools available in your path. In this case, +you must set the environment variable CROSS_COMPILE in your shell. +Note that no changes to the Makefile or any other source files are +necessary. For example using the ELDK on a 4xx CPU, please enter: + + $ CROSS_COMPILE=ppc_4xx- + $ export CROSS_COMPILE + +Note: If you wish to generate Windows versions of the utilities in + the tools directory you can use the MinGW toolchain + (http://www.mingw.org). Set your HOST tools to the MinGW + toolchain and execute 'make tools'. For example: + + $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools + + Binaries such as tools/mkimage.exe will be created which can + be executed on computers running Windows. + +U-Boot is intended to be simple to build. After installing the +sources you must configure U-Boot for one specific board type. This +is done by typing: + + make NAME_config + +where "NAME_config" is the name of one of the existing configu- +rations; see the main Makefile for supported names. + +Note: for some board special configuration names may exist; check if + additional information is available from the board vendor; for + instance, the TQM823L systems are available without (standard) + or with LCD support. You can select such additional "features" + when choosing the configuration, i. e. + + make TQM823L_config + - will configure for a plain TQM823L, i. e. no LCD support + + make TQM823L_LCD_config + - will configure for a TQM823L with U-Boot console on LCD + + etc. + + +Finally, type "make all", and you should get some working U-Boot +images ready for download to / installation on your system: + +- "u-boot.bin" is a raw binary image +- "u-boot" is an image in ELF binary format +- "u-boot.srec" is in Motorola S-Record format + +By default the build is performed locally and the objects are saved +in the source directory. One of the two methods can be used to change +this behavior and build U-Boot to some external directory: + +1. Add O= to the make command line invocations: + + make O=/tmp/build distclean + make O=/tmp/build NAME_config + make O=/tmp/build all + +2. Set environment variable BUILD_DIR to point to the desired location: + + export BUILD_DIR=/tmp/build + make distclean + make NAME_config + make all + +Note that the command line "O=" setting overrides the BUILD_DIR environment +variable. + + +Please be aware that the Makefiles assume you are using GNU make, so +for instance on NetBSD you might need to use "gmake" instead of +native "make". + + +If the system board that you have is not listed, then you will need +to port U-Boot to your hardware platform. To do this, follow these +steps: + +1. Add a new configuration option for your board to the toplevel + "Makefile" and to the "MAKEALL" script, using the existing + entries as examples. Note that here and at many other places + boards and other names are listed in alphabetical sort order. Please + keep this order. +2. Create a new directory to hold your board specific code. Add any + files you need. In your board directory, you will need at least + the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". +3. Create a new configuration file "include/configs/<board>.h" for + your board +3. If you're porting U-Boot to a new CPU, then also create a new + directory to hold your CPU specific code. Add any files you need. +4. Run "make <board>_config" with your new name. +5. Type "make", and you should get a working "u-boot.srec" file + to be installed on your target system. +6. Debug and solve any problems that might arise. + [Of course, this last step is much harder than it sounds.] + + +Testing of U-Boot Modifications, Ports to New Hardware, etc.: +============================================================== + +If you have modified U-Boot sources (for instance added a new board +or support for new devices, a new CPU, etc.) you are expected to +provide feedback to the other developers. The feedback normally takes +the form of a "patch", i. e. a context diff against a certain (latest +official or latest in the git repository) version of U-Boot sources. + +But before you submit such a patch, please verify that your modifi- +cation did not break existing code. At least make sure that *ALL* of +the supported boards compile WITHOUT ANY compiler warnings. To do so, +just run the "MAKEALL" script, which will configure and build U-Boot +for ALL supported system. Be warned, this will take a while. You can +select which (cross) compiler to use by passing a `CROSS_COMPILE' +environment variable to the script, i. e. to use the ELDK cross tools +you can type + + CROSS_COMPILE=ppc_8xx- MAKEALL + +or to build on a native PowerPC system you can type + + CROSS_COMPILE=' ' MAKEALL + +When using the MAKEALL script, the default behaviour is to build +U-Boot in the source directory. This location can be changed by +setting the BUILD_DIR environment variable. Also, for each target +built, the MAKEALL script saves two log files (<target>.ERR and +<target>.MAKEALL) in the <source dir>/LOG directory. This default +location can be changed by setting the MAKEALL_LOGDIR environment +variable. For example: + + export BUILD_DIR=/tmp/build + export MAKEALL_LOGDIR=/tmp/log + CROSS_COMPILE=ppc_8xx- MAKEALL + +With the above settings build objects are saved in the /tmp/build, +log files are saved in the /tmp/log and the source tree remains clean +during the whole build process. + + +See also "U-Boot Porting Guide" below. + + +Monitor Commands - Overview: +============================ + +go - start application at address 'addr' +run - run commands in an environment variable +bootm - boot application image from memory +bootp - boot image via network using BootP/TFTP protocol +tftpboot- boot image via network using TFTP protocol + and env variables "ipaddr" and "serverip" + (and eventually "gatewayip") +rarpboot- boot image via network using RARP/TFTP protocol +diskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' +loads - load S-Record file over serial line +loadb - load binary file over serial line (kermit mode) +md - memory display +mm - memory modify (auto-incrementing) +nm - memory modify (constant address) +mw - memory write (fill) +cp - memory copy +cmp - memory compare +crc32 - checksum calculation +i2c - I2C sub-system +sspi - SPI utility commands +base - print or set address offset +printenv- print environment variables +setenv - set environment variables +saveenv - save environment variables to persistent storage +protect - enable or disable FLASH write protection +erase - erase FLASH memory +flinfo - print FLASH memory information +bdinfo - print Board Info structure +iminfo - print header information for application image +coninfo - print console devices and informations +ide - IDE sub-system +loop - infinite loop on address range +loopw - infinite write loop on address range +mtest - simple RAM test +icache - enable or disable instruction cache +dcache - enable or disable data cache +reset - Perform RESET of the CPU +echo - echo args to console +version - print monitor version +help - print online help +? - alias for 'help' + + +Monitor Commands - Detailed Description: +======================================== + +TODO. + +For now: just type "help <command>". + + +Environment Variables: +====================== + +U-Boot supports user configuration using Environment Variables which +can be made persistent by saving to Flash memory. + +Environment Variables are set using "setenv", printed using +"printenv", and saved to Flash using "saveenv". Using "setenv" +without a value can be used to delete a variable from the +environment. As long as you don't save the environment you are +working with an in-memory copy. In case the Flash area containing the +environment is erased by accident, a default environment is provided. + +Some configuration options can be set using Environment Variables. + +List of environment variables (most likely not complete): + + baudrate - see CONFIG_BAUDRATE + + bootdelay - see CONFIG_BOOTDELAY + + bootcmd - see CONFIG_BOOTCOMMAND + + bootargs - Boot arguments when booting an RTOS image + + bootfile - Name of the image to load with TFTP + + bootm_low - Memory range available for image processing in the bootm + command can be restricted. This variable is given as + a hexadecimal number and defines lowest address allowed + for use by the bootm command. See also "bootm_size" + environment variable. Address defined by "bootm_low" is + also the base of the initial memory mapping for the Linux + kernel -- see the description of CONFIG_SYS_BOOTMAPSZ. + + bootm_size - Memory range available for image processing in the bootm + command can be restricted. This variable is given as + a hexadecimal number and defines the size of the region + allowed for use by the bootm command. See also "bootm_low" + environment variable. + + updatefile - Location of the software update file on a TFTP server, used + by the automatic software update feature. Please refer to + documentation in doc/README.update for more details. + + autoload - if set to "no" (any string beginning with 'n'), + "bootp" will just load perform a lookup of the + configuration from the BOOTP server, but not try to + load any image using TFTP + + autostart - if set to "yes", an image loaded using the "bootp", + "rarpboot", "tftpboot" or "diskboot" commands will + be automatically started (by internally calling + "bootm") + + If set to "no", a standalone image passed to the + "bootm" command will be copied to the load address + (and eventually uncompressed), but NOT be started. + This can be used to load and uncompress arbitrary + data. + + i2cfast - (PPC405GP|PPC405EP only) + if set to 'y' configures Linux I2C driver for fast + mode (400kHZ). This environment variable is used in + initialization code. So, for changes to be effective + it must be saved and board must be reset. + + initrd_high - restrict positioning of initrd images: + If this variable is not set, initrd images will be + copied to the highest possible address in RAM; this + is usually what you want since it allows for + maximum initrd size. If for some reason you want to + make sure that the initrd image is loaded below the + CONFIG_SYS_BOOTMAPSZ limit, you can set this environment + variable to a value of "no" or "off" or "0". + Alternatively, you can set it to a maximum upper + address to use (U-Boot will still check that it + does not overwrite the U-Boot stack and data). + + For instance, when you have a system with 16 MB + RAM, and want to reserve 4 MB from use by Linux, + you can do this by adding "mem=12M" to the value of + the "bootargs" variable. However, now you must make + sure that the initrd image is placed in the first + 12 MB as well - this can be done with + + setenv initrd_high 00c00000 + + If you set initrd_high to 0xFFFFFFFF, this is an + indication to U-Boot that all addresses are legal + for the Linux kernel, including addresses in flash + memory. In this case U-Boot will NOT COPY the + ramdisk at all. This may be useful to reduce the + boot time on your system, but requires that this + feature is supported by your Linux kernel. + + ipaddr - IP address; needed for tftpboot command + + loadaddr - Default load address for commands like "bootp", + "rarpboot", "tftpboot", "loadb" or "diskboot" + + loads_echo - see CONFIG_LOADS_ECHO + + serverip - TFTP server IP address; needed for tftpboot command + + bootretry - see CONFIG_BOOT_RETRY_TIME + + bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR + + bootstopkey - see CONFIG_AUTOBOOT_STOP_STR + + ethprime - When CONFIG_NET_MULTI is enabled controls which + interface is used first. + + ethact - When CONFIG_NET_MULTI is enabled controls which + interface is currently active. For example you + can do the following + + => setenv ethact FEC ETHERNET + => ping 192.168.0.1 # traffic sent on FEC ETHERNET + => setenv ethact SCC ETHERNET + => ping 10.0.0.1 # traffic sent on SCC ETHERNET + + ethrotate - When set to "no" U-Boot does not go through all + available network interfaces. + It just stays at the currently selected interface. + + netretry - When set to "no" each network operation will + either succeed or fail without retrying. + When set to "once" the network operation will + fail when all the available network interfaces + are tried once without success. + Useful on scripts which control the retry operation + themselves. + + npe_ucode - set load address for the NPE microcode + + tftpsrcport - If this is set, the value is used for TFTP's + UDP source port. + + tftpdstport - If this is set, the value is used for TFTP's UDP + destination port instead of the Well Know Port 69. + + tftpblocksize - Block size to use for TFTP transfers; if not set, + we use the TFTP server's default block size + + tftptimeout - Retransmission timeout for TFTP packets (in milli- + seconds, minimum value is 1000 = 1 second). Defines + when a packet is considered to be lost so it has to + be retransmitted. The default is 5000 = 5 seconds. + Lowering this value may make downloads succeed + faster in networks with high packet loss rates or + with unreliable TFTP servers. + + vlan - When set to a value < 4095 the traffic over + Ethernet is encapsulated/received over 802.1q + VLAN tagged frames. + +The following environment variables may be used and automatically +updated by the network boot commands ("bootp" and "rarpboot"), +depending the information provided by your boot server: + + bootfile - see above + dnsip - IP address of your Domain Name Server + dnsip2 - IP address of your secondary Domain Name Server + gatewayip - IP address of the Gateway (Router) to use + hostname - Target hostname + ipaddr - see above + netmask - Subnet Mask + rootpath - Pathname of the root filesystem on the NFS server + serverip - see above + + +There are two special Environment Variables: + + serial# - contains hardware identification information such + as type string and/or serial number + ethaddr - Ethernet address + +These variables can be set only once (usually during manufacturing of +the board). U-Boot refuses to delete or overwrite these variables +once they have been set once. + + +Further special Environment Variables: + + ver - Contains the U-Boot version string as printed + with the "version" command. This variable is + readonly (see CONFIG_VERSION_VARIABLE). + + +Please note that changes to some configuration parameters may take +only effect after the next boot (yes, that's just like Windoze :-). + + +Command Line Parsing: +===================== + +There are two different command line parsers available with U-Boot: +the old "simple" one, and the much more powerful "hush" shell: + +Old, simple command line parser: +-------------------------------- + +- supports environment variables (through setenv / saveenv commands) +- several commands on one line, separated by ';' +- variable substitution using "... ${name} ..." syntax +- special characters ('$', ';') can be escaped by prefixing with '\', + for example: + setenv bootcmd bootm \${address} +- You can also escape text by enclosing in single apostrophes, for example: + setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' + +Hush shell: +----------- + +- similar to Bourne shell, with control structures like + if...then...else...fi, for...do...done; while...do...done, + until...do...done, ... +- supports environment ("global") variables (through setenv / saveenv + commands) and local shell variables (through standard shell syntax + "name=value"); only environment variables can be used with "run" + command + +General rules: +-------------- + +(1) If a command line (or an environment variable executed by a "run" + command) contains several commands separated by semicolon, and + one of these commands fails, then the remaining commands will be + executed anyway. + +(2) If you execute several variables with one call to run (i. e. + calling run with a list of variables as arguments), any failing + command will cause "run" to terminate, i. e. the remaining + variables are not executed. + +Note for Redundant Ethernet Interfaces: +======================================= + +Some boards come with redundant Ethernet interfaces; U-Boot supports +such configurations and is capable of automatic selection of a +"working" interface when needed. MAC assignment works as follows: + +Network interfaces are numbered eth0, eth1, eth2, ... Corresponding +MAC addresses can be stored in the environment as "ethaddr" (=>eth0), +"eth1addr" (=>eth1), "eth2addr", ... + +If the network interface stores some valid MAC address (for instance +in SROM), this is used as default address if there is NO correspon- +ding setting in the environment; if the corresponding environment +variable is set, this overrides the settings in the card; that means: + +o If the SROM has a valid MAC address, and there is no address in the + environment, the SROM's address is used. + +o If there is no valid address in the SROM, and a definition in the + environment exists, then the value from the environment variable is + used. + +o If both the SROM and the environment contain a MAC address, and + both addresses are the same, this MAC address is used. + +o If both the SROM and the environment contain a MAC address, and the + addresses differ, the value from the environment is used and a + warning is printed. + +o If neither SROM nor the environment contain a MAC address, an error + is raised. + +If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses +will be programmed into hardware as part of the initialization process. This +may be skipped by setting the appropriate 'ethmacskip' environment variable. +The naming convention is as follows: +"ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc. + +Image Formats: +============== + +U-Boot is capable of booting (and performing other auxiliary operations on) +images in two formats: + +New uImage format (FIT) +----------------------- + +Flexible and powerful format based on Flattened Image Tree -- FIT (similar +to Flattened Device Tree). It allows the use of images with multiple +components (several kernels, ramdisks, etc.), with contents protected by +SHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory. + + +Old uImage format +----------------- + +Old image format is based on binary files which can be basically anything, +preceded by a special header; see the definitions in include/image.h for +details; basically, the header defines the following image properties: + +* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, + 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, + LynxOS, pSOS, QNX, RTEMS, INTEGRITY; + Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, + INTEGRITY). +* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, + IA64, MIPS, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; + Currently supported: ARM, AVR32, Intel x86, MIPS, Nios II, PowerPC). +* Compression Type (uncompressed, gzip, bzip2) +* Load Address +* Entry Point +* Image Name +* Image Timestamp + +The header is marked by a special Magic Number, and both the header +and the data portions of the image are secured against corruption by +CRC32 checksums. + + +Linux Support: +============== + +Although U-Boot should support any OS or standalone application +easily, the main focus has always been on Linux during the design of +U-Boot. + +U-Boot includes many features that so far have been part of some +special "boot loader" code within the Linux kernel. Also, any +"initrd" images to be used are no longer part of one big Linux image; +instead, kernel and "initrd" are separate images. This implementation +serves several purposes: + +- the same features can be used for other OS or standalone + applications (for instance: using compressed images to reduce the + Flash memory footprint) + +- it becomes much easier to port new Linux kernel versions because + lots of low-level, hardware dependent stuff are done by U-Boot + +- the same Linux kernel image can now be used with different "initrd" + images; of course this also means that different kernel images can + be run with the same "initrd". This makes testing easier (you don't + have to build a new "zImage.initrd" Linux image when you just + change a file in your "initrd"). Also, a field-upgrade of the + software is easier now. + + +Linux HOWTO: +============ + +Porting Linux to U-Boot based systems: +--------------------------------------- + +U-Boot cannot save you from doing all the necessary modifications to +configure the Linux device drivers for use with your target hardware +(no, we don't intend to provide a full virtual machine interface to +Linux :-). + +But now you can ignore ALL boot loader code (in arch/powerpc/mbxboot). + +Just make sure your machine specific header file (for instance +include/asm-ppc/tqm8xx.h) includes the same definition of the Board +Information structure as we define in include/asm-<arch>/u-boot.h, +and make sure that your definition of IMAP_ADDR uses the same value +as your U-Boot configuration in CONFIG_SYS_IMMR. + + +Configuring the Linux kernel: +----------------------------- + +No specific requirements for U-Boot. Make sure you have some root +device (initial ramdisk, NFS) for your target system. + + +Building a Linux Image: +----------------------- + +With U-Boot, "normal" build targets like "zImage" or "bzImage" are +not used. If you use recent kernel source, a new build target +"uImage" will exist which automatically builds an image usable by +U-Boot. Most older kernels also have support for a "pImage" target, +which was introduced for our predecessor project PPCBoot and uses a +100% compatible format. + +Example: + + make TQM850L_config + make oldconfig + make dep + make uImage + +The "uImage" build target uses a special tool (in 'tools/mkimage') to +encapsulate a compressed Linux kernel image with header information, +CRC32 checksum etc. for use with U-Boot. This is what we are doing: + +* build a standard "vmlinux" kernel image (in ELF binary format): + +* convert the kernel into a raw binary image: + + ${CROSS_COMPILE}-objcopy -O binary \ + -R .note -R .comment \ + -S vmlinux linux.bin + +* compress the binary image: + + gzip -9 linux.bin + +* package compressed binary image for U-Boot: + + mkimage -A ppc -O linux -T kernel -C gzip \ + -a 0 -e 0 -n "Linux Kernel Image" \ + -d linux.bin.gz uImage + + +The "mkimage" tool can also be used to create ramdisk images for use +with U-Boot, either separated from the Linux kernel image, or +combined into one file. "mkimage" encapsulates the images with a 64 +byte header containing information about target architecture, +operating system, image type, compression method, entry points, time +stamp, CRC32 checksums, etc. + +"mkimage" can be called in two ways: to verify existing images and +print the header information, or to build new images. + +In the first form (with "-l" option) mkimage lists the information +contained in the header of an existing U-Boot image; this includes +checksum verification: + + tools/mkimage -l image + -l ==> list image header information + +The second form (with "-d" option) is used to build a U-Boot image +from a "data file" which is used as image payload: + + tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \ + -n name -d data_file image + -A ==> set architecture to 'arch' + -O ==> set operating system to 'os' + -T ==> set image type to 'type' + -C ==> set compression type 'comp' + -a ==> set load address to 'addr' (hex) + -e ==> set entry point to 'ep' (hex) + -n ==> set image name to 'name' + -d ==> use image data from 'datafile' + +Right now, all Linux kernels for PowerPC systems use the same load +address (0x00000000), but the entry point address depends on the +kernel version: + +- 2.2.x kernels have the entry point at 0x0000000C, +- 2.3.x and later kernels have the entry point at 0x00000000. + +So a typical call to build a U-Boot image would read: + + -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ + > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \ + > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \ + > examples/uImage.TQM850L + Image Name: 2.4.4 kernel for TQM850L + Created: Wed Jul 19 02:34:59 2000 + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 335725 Bytes = 327.86 kB = 0.32 MB + Load Address: 0x00000000 + Entry Point: 0x00000000 + +To verify the contents of the image (or check for corruption): + + -> tools/mkimage -l examples/uImage.TQM850L + Image Name: 2.4.4 kernel for TQM850L + Created: Wed Jul 19 02:34:59 2000 + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 335725 Bytes = 327.86 kB = 0.32 MB + Load Address: 0x00000000 + Entry Point: 0x00000000 + +NOTE: for embedded systems where boot time is critical you can trade +speed for memory and install an UNCOMPRESSED image instead: this +needs more space in Flash, but boots much faster since it does not +need to be uncompressed: + + -> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz + -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ + > -A ppc -O linux -T kernel -C none -a 0 -e 0 \ + > -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \ + > examples/uImage.TQM850L-uncompressed + Image Name: 2.4.4 kernel for TQM850L + Created: Wed Jul 19 02:34:59 2000 + Image Type: PowerPC Linux Kernel Image (uncompressed) + Data Size: 792160 Bytes = 773.59 kB = 0.76 MB + Load Address: 0x00000000 + Entry Point: 0x00000000 + + +Similar you can build U-Boot images from a 'ramdisk.image.gz' file +when your kernel is intended to use an initial ramdisk: + + -> tools/mkimage -n 'Simple Ramdisk Image' \ + > -A ppc -O linux -T ramdisk -C gzip \ + > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd + Image Name: Simple Ramdisk Image + Created: Wed Jan 12 14:01:50 2000 + Image Type: PowerPC Linux RAMDisk Image (gzip compressed) + Data Size: 566530 Bytes = 553.25 kB = 0.54 MB + Load Address: 0x00000000 + Entry Point: 0x00000000 + + +Installing a Linux Image: +------------------------- + +To downloading a U-Boot image over the serial (console) interface, +you must convert the image to S-Record format: + + objcopy -I binary -O srec examples/image examples/image.srec + +The 'objcopy' does not understand the information in the U-Boot +image header, so the resulting S-Record file will be relative to +address 0x00000000. To load it to a given address, you need to +specify the target address as 'offset' parameter with the 'loads' +command. + +Example: install the image to address 0x40100000 (which on the +TQM8xxL is in the first Flash bank): + + => erase 40100000 401FFFFF + + .......... done + Erased 8 sectors + + => loads 40100000 + ## Ready for S-Record download ... + ~>examples/image.srec + 1 2 3 4 5 6 7 8 9 10 11 12 13 ... + ... + 15989 15990 15991 15992 + [file transfer complete] + [connected] + ## Start Addr = 0x00000000 + + +You can check the success of the download using the 'iminfo' command; +this includes a checksum verification so you can be sure no data +corruption happened: + + => imi 40100000 + + ## Checking Image at 40100000 ... + Image Name: 2.2.13 for initrd on TQM850L + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 335725 Bytes = 327 kB = 0 MB + Load Address: 00000000 + Entry Point: 0000000c + Verifying Checksum ... OK + + +Boot Linux: +----------- + +The "bootm" command is used to boot an application that is stored in +memory (RAM or Flash). In case of a Linux kernel image, the contents +of the "bootargs" environment variable is passed to the kernel as +parameters. You can check and modify this variable using the +"printenv" and "setenv" commands: + + + => printenv bootargs + bootargs=root=/dev/ram + + => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 + + => printenv bootargs + bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 + + => bootm 40020000 + ## Booting Linux kernel at 40020000 ... + Image Name: 2.2.13 for NFS on TQM850L + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 381681 Bytes = 372 kB = 0 MB + Load Address: 00000000 + Entry Point: 0000000c + Verifying Checksum ... OK + Uncompressing Kernel Image ... OK + Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000 + Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 + time_init: decrementer frequency = 187500000/60 + Calibrating delay loop... 49.77 BogoMIPS + Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000] + ... + +If you want to boot a Linux kernel with initial RAM disk, you pass +the memory addresses of both the kernel and the initrd image (PPBCOOT +format!) to the "bootm" command: + + => imi 40100000 40200000 + + ## Checking Image at 40100000 ... + Image Name: 2.2.13 for initrd on TQM850L + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 335725 Bytes = 327 kB = 0 MB + Load Address: 00000000 + Entry Point: 0000000c + Verifying Checksum ... OK + + ## Checking Image at 40200000 ... + Image Name: Simple Ramdisk Image + Image Type: PowerPC Linux RAMDisk Image (gzip compressed) + Data Size: 566530 Bytes = 553 kB = 0 MB + Load Address: 00000000 + Entry Point: 00000000 + Verifying Checksum ... OK + + => bootm 40100000 40200000 + ## Booting Linux kernel at 40100000 ... + Image Name: 2.2.13 for initrd on TQM850L + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 335725 Bytes = 327 kB = 0 MB + Load Address: 00000000 + Entry Point: 0000000c + Verifying Checksum ... OK + Uncompressing Kernel Image ... OK + ## Loading RAMDisk Image at 40200000 ... + Image Name: Simple Ramdisk Image + Image Type: PowerPC Linux RAMDisk Image (gzip compressed) + Data Size: 566530 Bytes = 553 kB = 0 MB + Load Address: 00000000 + Entry Point: 00000000 + Verifying Checksum ... OK + Loading Ramdisk ... OK + Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000 + Boot arguments: root=/dev/ram + time_init: decrementer frequency = 187500000/60 + Calibrating delay loop... 49.77 BogoMIPS + ... + RAMDISK: Compressed image found at block 0 + VFS: Mounted root (ext2 filesystem). + + bash# + +Boot Linux and pass a flat device tree: +----------- + +First, U-Boot must be compiled with the appropriate defines. See the section +titled "Linux Kernel Interface" above for a more in depth explanation. The +following is an example of how to start a kernel and pass an updated +flat device tree: + +=> print oftaddr +oftaddr=0x300000 +=> print oft +oft=oftrees/mpc8540ads.dtb +=> tftp $oftaddr $oft +Speed: 1000, full duplex +Using TSEC0 device +TFTP from server 192.168.1.1; our IP address is 192.168.1.101 +Filename 'oftrees/mpc8540ads.dtb'. +Load address: 0x300000 +Loading: # +done +Bytes transferred = 4106 (100a hex) +=> tftp $loadaddr $bootfile +Speed: 1000, full duplex +Using TSEC0 device +TFTP from server 192.168.1.1; our IP address is 192.168.1.2 +Filename 'uImage'. +Load address: 0x200000 +Loading:############ +done +Bytes transferred = 1029407 (fb51f hex) +=> print loadaddr +loadaddr=200000 +=> print oftaddr +oftaddr=0x300000 +=> bootm $loadaddr - $oftaddr +## Booting image at 00200000 ... + Image Name: Linux-2.6.17-dirty + Image Type: PowerPC Linux Kernel Image (gzip compressed) + Data Size: 1029343 Bytes = 1005.2 kB + Load Address: 00000000 + Entry Point: 00000000 + Verifying Checksum ... OK + Uncompressing Kernel Image ... OK +Booting using flat device tree at 0x300000 +Using MPC85xx ADS machine description +Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb +[snip] + + +More About U-Boot Image Types: +------------------------------ + +U-Boot supports the following image types: + + "Standalone Programs" are directly runnable in the environment + provided by U-Boot; it is expected that (if they behave + well) you can continue to work in U-Boot after return from + the Standalone Program. + "OS Kernel Images" are usually images of some Embedded OS which + will take over control completely. Usually these programs + will install their own set of exception handlers, device + drivers, set up the MMU, etc. - this means, that you cannot + expect to re-enter U-Boot except by resetting the CPU. + "RAMDisk Images" are more or less just data blocks, and their + parameters (address, size) are passed to an OS kernel that is + being started. + "Multi-File Images" contain several images, typically an OS + (Linux) kernel image and one or more data images like + RAMDisks. This construct is useful for instance when you want + to boot over the network using BOOTP etc., where the boot + server provides just a single image file, but you want to get + for instance an OS kernel and a RAMDisk image. + + "Multi-File Images" start with a list of image sizes, each + image size (in bytes) specified by an "uint32_t" in network + byte order. This list is terminated by an "(uint32_t)0". + Immediately after the terminating 0 follow the images, one by + one, all aligned on "uint32_t" boundaries (size rounded up to + a multiple of 4 bytes). + + "Firmware Images" are binary images containing firmware (like + U-Boot or FPGA images) which usually will be programmed to + flash memory. + + "Script files" are command sequences that will be executed by + U-Boot's command interpreter; this feature is especially + useful when you configure U-Boot to use a real shell (hush) + as command interpreter. + + +Standalone HOWTO: +================= + +One of the features of U-Boot is that you can dynamically load and +run "standalone" applications, which can use some resources of +U-Boot like console I/O functions or interrupt services. + +Two simple examples are included with the sources: + +"Hello World" Demo: +------------------- + +'examples/hello_world.c' contains a small "Hello World" Demo +application; it is automatically compiled when you build U-Boot. +It's configured to run at address 0x00040004, so you can play with it +like that: + + => loads + ## Ready for S-Record download ... + ~>examples/hello_world.srec + 1 2 3 4 5 6 7 8 9 10 11 ... + [file transfer complete] + [connected] + ## Start Addr = 0x00040004 + + => go 40004 Hello World! This is a test. + ## Starting application at 0x00040004 ... + Hello World + argc = 7 + argv[0] = "40004" + argv[1] = "Hello" + argv[2] = "World!" + argv[3] = "This" + argv[4] = "is" + argv[5] = "a" + argv[6] = "test." + argv[7] = "<NULL>" + Hit any key to exit ... + + ## Application terminated, rc = 0x0 + +Another example, which demonstrates how to register a CPM interrupt +handler with the U-Boot code, can be found in 'examples/timer.c'. +Here, a CPM timer is set up to generate an interrupt every second. +The interrupt service routine is trivial, just printing a '.' +character, but this is just a demo program. The application can be +controlled by the following keys: + + ? - print current values og the CPM Timer registers + b - enable interrupts and start timer + e - stop timer and disable interrupts + q - quit application + + => loads + ## Ready for S-Record download ... + ~>examples/timer.srec + 1 2 3 4 5 6 7 8 9 10 11 ... + [file transfer complete] + [connected] + ## Start Addr = 0x00040004 + + => go 40004 + ## Starting application at 0x00040004 ... + TIMERS=0xfff00980 + Using timer 1 + tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0 + +Hit 'b': + [q, b, e, ?] Set interval 1000000 us + Enabling timer +Hit '?': + [q, b, e, ?] ........ + tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0 +Hit '?': + [q, b, e, ?] . + tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0 +Hit '?': + [q, b, e, ?] . + tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0 +Hit '?': + [q, b, e, ?] . + tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0 +Hit 'e': + [q, b, e, ?] ...Stopping timer +Hit 'q': + [q, b, e, ?] ## Application terminated, rc = 0x0 + + +Minicom warning: +================ + +Over time, many people have reported problems when trying to use the +"minicom" terminal emulation program for serial download. I (wd) +consider minicom to be broken, and recommend not to use it. Under +Unix, I recommend to use C-Kermit for general purpose use (and +especially for kermit binary protocol download ("loadb" command), and +use "cu" for S-Record download ("loads" command). + +Nevertheless, if you absolutely want to use it try adding this +configuration to your "File transfer protocols" section: + + Name Program Name U/D FullScr IO-Red. Multi + X kermit /usr/bin/kermit -i -l %l -s Y U Y N N + Y kermit /usr/bin/kermit -i -l %l -r N D Y N N + + +NetBSD Notes: +============= + +Starting at version 0.9.2, U-Boot supports NetBSD both as host +(build U-Boot) and target system (boots NetBSD/mpc8xx). + +Building requires a cross environment; it is known to work on +NetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also +need gmake since the Makefiles are not compatible with BSD make). +Note that the cross-powerpc package does not install include files; +attempting to build U-Boot will fail because <machine/ansi.h> is +missing. This file has to be installed and patched manually: + + # cd /usr/pkg/cross/powerpc-netbsd/include + # mkdir powerpc + # ln -s powerpc machine + # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h + # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST + +Native builds *don't* work due to incompatibilities between native +and U-Boot include files. + +Booting assumes that (the first part of) the image booted is a +stage-2 loader which in turn loads and then invokes the kernel +proper. Loader sources will eventually appear in the NetBSD source +tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the +meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz + + +Implementation Internals: +========================= + +The following is not intended to be a complete description of every +implementation detail. However, it should help to understand the +inner workings of U-Boot and make it easier to port it to custom +hardware. + + +Initial Stack, Global Data: +--------------------------- + +The implementation of U-Boot is complicated by the fact that U-Boot +starts running out of ROM (flash memory), usually without access to +system RAM (because the memory controller is not initialized yet). +This means that we don't have writable Data or BSS segments, and BSS +is not initialized as zero. To be able to get a C environment working +at all, we have to allocate at least a minimal stack. Implementation +options for this are defined and restricted by the CPU used: Some CPU +models provide on-chip memory (like the IMMR area on MPC8xx and +MPC826x processors), on others (parts of) the data cache can be +locked as (mis-) used as memory, etc. + + Chris Hallinan posted a good summary of these issues to the + U-Boot mailing list: + + Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? + From: "Chris Hallinan" <clh@net1plus.com> + Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) + ... + + Correct me if I'm wrong, folks, but the way I understand it + is this: Using DCACHE as initial RAM for Stack, etc, does not + require any physical RAM backing up the cache. The cleverness + is that the cache is being used as a temporary supply of + necessary storage before the SDRAM controller is setup. It's + beyond the scope of this list to explain the details, but you + can see how this works by studying the cache architecture and + operation in the architecture and processor-specific manuals. + + OCM is On Chip Memory, which I believe the 405GP has 4K. It + is another option for the system designer to use as an + initial stack/RAM area prior to SDRAM being available. Either + option should work for you. Using CS 4 should be fine if your + board designers haven't used it for something that would + cause you grief during the initial boot! It is frequently not + used. + + CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere + with your processor/board/system design. The default value + you will find in any recent u-boot distribution in + walnut.h should work for you. I'd set it to a value larger + than your SDRAM module. If you have a 64MB SDRAM module, set + it above 400_0000. Just make sure your board has no resources + that are supposed to respond to that address! That code in + start.S has been around a while and should work as is when + you get the config right. + + -Chris Hallinan + DS4.COM, Inc. + +It is essential to remember this, since it has some impact on the C +code for the initialization procedures: + +* Initialized global data (data segment) is read-only. Do not attempt + to write it. + +* Do not use any uninitialized global data (or implicitely initialized + as zero data - BSS segment) at all - this is undefined, initiali- + zation is performed later (when relocating to RAM). + +* Stack space is very limited. Avoid big data buffers or things like + that. + +Having only the stack as writable memory limits means we cannot use +normal global data to share information beween the code. But it +turned out that the implementation of U-Boot can be greatly +simplified by making a global data structure (gd_t) available to all +functions. We could pass a pointer to this data as argument to _all_ +functions, but this would bloat the code. Instead we use a feature of +the GCC compiler (Global Register Variables) to share the data: we +place a pointer (gd) to the global data into a register which we +reserve for this purpose. + +When choosing a register for such a purpose we are restricted by the +relevant (E)ABI specifications for the current architecture, and by +GCC's implementation. + +For PowerPC, the following registers have specific use: + R1: stack pointer + R2: reserved for system use + R3-R4: parameter passing and return values + R5-R10: parameter passing + R13: small data area pointer + R30: GOT pointer + R31: frame pointer + + (U-Boot also uses R12 as internal GOT pointer. r12 + is a volatile register so r12 needs to be reset when + going back and forth between asm and C) + + ==> U-Boot will use R2 to hold a pointer to the global data + + Note: on PPC, we could use a static initializer (since the + address of the global data structure is known at compile time), + but it turned out that reserving a register results in somewhat + smaller code - although the code savings are not that big (on + average for all boards 752 bytes for the whole U-Boot image, + 624 text + 127 data). + +On Blackfin, the normal C ABI (except for P3) is followed as documented here: + http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface + + ==> U-Boot will use P3 to hold a pointer to the global data + +On ARM, the following registers are used: + + R0: function argument word/integer result + R1-R3: function argument word + R9: GOT pointer + R10: stack limit (used only if stack checking if enabled) + R11: argument (frame) pointer + R12: temporary workspace + R13: stack pointer + R14: link register + R15: program counter + + ==> U-Boot will use R8 to hold a pointer to the global data + +On Nios II, the ABI is documented here: + http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf + + ==> U-Boot will use gp to hold a pointer to the global data + + Note: on Nios II, we give "-G0" option to gcc and don't use gp + to access small data sections, so gp is free. + +NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, +or current versions of GCC may "optimize" the code too much. + +Memory Management: +------------------ + +U-Boot runs in system state and uses physical addresses, i.e. the +MMU is not used either for address mapping nor for memory protection. + +The available memory is mapped to fixed addresses using the memory +controller. In this process, a contiguous block is formed for each +memory type (Flash, SDRAM, SRAM), even when it consists of several +physical memory banks. + +U-Boot is installed in the first 128 kB of the first Flash bank (on +TQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After +booting and sizing and initializing DRAM, the code relocates itself +to the upper end of DRAM. Immediately below the U-Boot code some +memory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN +configuration setting]. Below that, a structure with global Board +Info data is placed, followed by the stack (growing downward). + +Additionally, some exception handler code is copied to the low 8 kB +of DRAM (0x00000000 ... 0x00001FFF). + +So a typical memory configuration with 16 MB of DRAM could look like +this: + + 0x0000 0000 Exception Vector code + : + 0x0000 1FFF + 0x0000 2000 Free for Application Use + : + : + + : + : + 0x00FB FF20 Monitor Stack (Growing downward) + 0x00FB FFAC Board Info Data and permanent copy of global data + 0x00FC 0000 Malloc Arena + : + 0x00FD FFFF + 0x00FE 0000 RAM Copy of Monitor Code + ... eventually: LCD or video framebuffer + ... eventually: pRAM (Protected RAM - unchanged by reset) + 0x00FF FFFF [End of RAM] + + +System Initialization: +---------------------- + +In the reset configuration, U-Boot starts at the reset entry point +(on most PowerPC systems at address 0x00000100). Because of the reset +configuration for CS0# this is a mirror of the onboard Flash memory. +To be able to re-map memory U-Boot then jumps to its link address. +To be able to implement the initialization code in C, a (small!) +initial stack is set up in the internal Dual Ported RAM (in case CPUs +which provide such a feature like MPC8xx or MPC8260), or in a locked +part of the data cache. After that, U-Boot initializes the CPU core, +the caches and the SIU. + +Next, all (potentially) available memory banks are mapped using a +preliminary mapping. For example, we put them on 512 MB boundaries +(multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash +on 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is +programmed for SDRAM access. Using the temporary configuration, a +simple memory test is run that determines the size of the SDRAM +banks. + +When there is more than one SDRAM bank, and the banks are of +different size, the largest is mapped first. For equal size, the first +bank (CS2#) is mapped first. The first mapping is always for address +0x00000000, with any additional banks following immediately to create +contiguous memory starting from 0. + +Then, the monitor installs itself at the upper end of the SDRAM area +and allocates memory for use by malloc() and for the global Board +Info data; also, the exception vector code is copied to the low RAM +pages, and the final stack is set up. + +Only after this relocation will you have a "normal" C environment; +until that you are restricted in several ways, mostly because you are +running from ROM, and because the code will have to be relocated to a +new address in RAM. + + +U-Boot Porting Guide: +---------------------- + +[Based on messages by Jerry Van Baren in the U-Boot-Users mailing +list, October 2002] + + +int main(int argc, char *argv[]) +{ + sighandler_t no_more_time; + + signal(SIGALRM, no_more_time); + alarm(PROJECT_DEADLINE - toSec (3 * WEEK)); + + if (available_money > available_manpower) { + Pay consultant to port U-Boot; + return 0; + } + + Download latest U-Boot source; + + Subscribe to u-boot mailing list; + + if (clueless) + email("Hi, I am new to U-Boot, how do I get started?"); + + while (learning) { + Read the README file in the top level directory; + Read http://www.denx.de/twiki/bin/view/DULG/Manual; + Read applicable doc/*.README; + Read the source, Luke; + /* find . -name "*.[chS]" | xargs grep -i <keyword> */ + } + + if (available_money > toLocalCurrency ($2500)) + Buy a BDI3000; + else + Add a lot of aggravation and time; + + if (a similar board exists) { /* hopefully... */ + cp -a board/<similar> board/<myboard> + cp include/configs/<similar>.h include/configs/<myboard>.h + } else { + Create your own board support subdirectory; + Create your own board include/configs/<myboard>.h file; + } + Edit new board/<myboard> files + Edit new include/configs/<myboard>.h + + while (!accepted) { + while (!running) { + do { + Add / modify source code; + } until (compiles); + Debug; + if (clueless) + email("Hi, I am having problems..."); + } + Send patch file to the U-Boot email list; + if (reasonable critiques) + Incorporate improvements from email list code review; + else + Defend code as written; + } + + return 0; +} + +void no_more_time (int sig) +{ + hire_a_guru(); +} + + +Coding Standards: +----------------- + +All contributions to U-Boot should conform to the Linux kernel +coding style; see the file "Documentation/CodingStyle" and the script +"scripts/Lindent" in your Linux kernel source directory. In sources +originating from U-Boot a style corresponding to "Lindent -pcs" (adding +spaces before parameters to function calls) is actually used. + +Source files originating from a different project (for example the +MTD subsystem) are generally exempt from these guidelines and are not +reformated to ease subsequent migration to newer versions of those +sources. + +Please note that U-Boot is implemented in C (and to some small parts in +Assembler); no C++ is used, so please do not use C++ style comments (//) +in your code. + +Please also stick to the following formatting rules: +- remove any trailing white space +- use TAB characters for indentation, not spaces +- make sure NOT to use DOS '\r\n' line feeds +- do not add more than 2 empty lines to source files +- do not add trailing empty lines to source files + +Submissions which do not conform to the standards may be returned +with a request to reformat the changes. + + +Submitting Patches: +------------------- + +Since the number of patches for U-Boot is growing, we need to +establish some rules. Submissions which do not conform to these rules +may be rejected, even when they contain important and valuable stuff. + +Please see http://www.denx.de/wiki/U-Boot/Patches for details. + +Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>; +see http://lists.denx.de/mailman/listinfo/u-boot + +When you send a patch, please include the following information with +it: + +* For bug fixes: a description of the bug and how your patch fixes + this bug. Please try to include a way of demonstrating that the + patch actually fixes something. + +* For new features: a description of the feature and your + implementation. + +* A CHANGELOG entry as plaintext (separate from the patch) + +* For major contributions, your entry to the CREDITS file + +* When you add support for a new board, don't forget to add this + board to the MAKEALL script, too. + +* If your patch adds new configuration options, don't forget to + document these in the README file. + +* The patch itself. If you are using git (which is *strongly* + recommended) you can easily generate the patch using the + "git-format-patch". If you then use "git-send-email" to send it to + the U-Boot mailing list, you will avoid most of the common problems + with some other mail clients. + + If you cannot use git, use "diff -purN OLD NEW". If your version of + diff does not support these options, then get the latest version of + GNU diff. + + The current directory when running this command shall be the parent + directory of the U-Boot source tree (i. e. please make sure that + your patch includes sufficient directory information for the + affected files). + + We prefer patches as plain text. MIME attachments are discouraged, + and compressed attachments must not be used. + +* If one logical set of modifications affects or creates several + files, all these changes shall be submitted in a SINGLE patch file. + +* Changesets that contain different, unrelated modifications shall be + submitted as SEPARATE patches, one patch per changeset. + + +Notes: + +* Before sending the patch, run the MAKEALL script on your patched + source tree and make sure that no errors or warnings are reported + for any of the boards. + +* Keep your modifications to the necessary minimum: A patch + containing several unrelated changes or arbitrary reformats will be + returned with a request to re-formatting / split it. + +* If you modify existing code, make sure that your new code does not + add to the memory footprint of the code ;-) Small is beautiful! + When adding new features, these should compile conditionally only + (using #ifdef), and the resulting code with the new feature + disabled must not need more memory than the old code without your + modification. + +* Remember that there is a size limit of 100 kB per message on the + u-boot mailing list. Bigger patches will be moderated. If they are + reasonable and not too big, they will be acknowledged. But patches + bigger than the size limit should be avoided. |