/* Copyright 2013-2014 IBM Corp. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or * implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* * Handle ChipTOD chip & configure core timebases */ #include #include #include #include #include #include #include #include /* TOD chip XSCOM addresses */ #define TOD_TTYPE_0 0x00040011 #define TOD_TTYPE_1 0x00040012 /* PSS switch */ #define TOD_TTYPE_2 0x00040013 /* Enable step checkers */ #define TOD_TTYPE_3 0x00040014 /* Request TOD */ #define TOD_TTYPE_4 0x00040015 /* Send TOD */ #define TOD_TTYPE_5 0x00040016 /* Invalidate TOD */ #define TOD_CHIPTOD_TO_TB 0x00040017 #define TOD_LOAD_TOD_MOD 0x00040018 #define TOD_CHIPTOD_VALUE 0x00040020 #define TOD_CHIPTOD_LOAD_TB 0x00040021 #define TOD_CHIPTOD_FSM 0x00040024 /* -- TOD PIB Master reg -- */ #define TOD_PIB_MASTER 0x00040027 #define TOD_PIBM_ADDR_CFG_MCAST PPC_BIT(25) #define TOD_PIBM_ADDR_CFG_SLADDR_MASK PPC_BITMASK(26,31) #define TOD_PIBM_ADDR_CFG_SLADDR_LSH PPC_BITLSHIFT(31) /* -- TOD Error interrupt register -- */ #define TOD_ERROR 0x00040030 /* SYNC errors */ #define TOD_ERR_CRMO_PARITY PPC_BIT(0) #define TOD_ERR_OSC0_PARITY PPC_BIT(1) #define TOD_ERR_OSC1_PARITY PPC_BIT(2) #define TOD_ERR_CRITC_PARITY PPC_BIT(13) #define TOD_ERR_PSS_HAMMING_DISTANCE PPC_BIT(18) #define TOD_ERR_DELAY_COMPL_PARITY PPC_BIT(22) /* CNTR errors */ #define TOD_ERR_CTCR_PARITY PPC_BIT(32) #define TOD_ERR_TOD_SYNC_CHECK PPC_BIT(33) #define TOD_ERR_TOD_FSM_PARITY PPC_BIT(34) #define TOD_ERR_TOD_REGISTER_PARITY PPC_BIT(35) #define TOD_ERR_OVERFLOW_YR2042 PPC_BIT(36) #define TOD_ERR_TOD_WOF_LSTEP_PARITY PPC_BIT(37) #define TOD_ERR_TTYPE0_RECVD PPC_BIT(38) #define TOD_ERR_TTYPE1_RECVD PPC_BIT(39) #define TOD_ERR_TTYPE2_RECVD PPC_BIT(40) #define TOD_ERR_TTYPE3_RECVD PPC_BIT(41) #define TOD_ERR_TTYPE4_RECVD PPC_BIT(42) #define TOD_ERR_TTYPE5_RECVD PPC_BIT(43) /* Magic TB value. One step cycle ahead of sync */ #define INIT_TB 0x000000000001ff0 /* Number of iterations for the various timeouts */ #define TIMEOUT_LOOPS 20000000 static enum chiptod_type { chiptod_unknown, chiptod_p7, chiptod_p8 } chiptod_type; static int32_t chiptod_primary = -1; static int32_t chiptod_secondary = -1; /* The base TFMR value is the same for the whole machine * for now as far as I can tell */ static uint64_t base_tfmr; /* * For now, we use a global lock for runtime chiptod operations, * eventually make this a per-core lock for wakeup rsync and * take all of them for RAS cases. */ static struct lock chiptod_lock = LOCK_UNLOCKED; static void chiptod_setup_base_tfmr(void) { struct dt_node *cpu = this_cpu()->node; uint64_t core_freq, tod_freq; uint64_t mcbs; base_tfmr = SPR_TFMR_TB_ECLIPZ; /* Get CPU and TOD freqs in Hz */ if (dt_has_node_property(cpu,"ibm,extended-clock-frequency", NULL)) core_freq = dt_prop_get_u64(cpu,"ibm,extended-clock-frequency"); else core_freq = dt_prop_get_u32(cpu, "clock-frequency"); tod_freq = 32000000; /* Calculate the "Max Cycles Between Steps" value according * to the magic formula: * * mcbs = (core_freq * max_jitter_factor) / (4 * tod_freq) / 100; * * The max jitter factor is set to 240 based on what pHyp uses. */ mcbs = (core_freq * 240) / (4 * tod_freq) / 100; prlog(PR_INFO, "CHIPTOD: Calculated MCBS is 0x%llx" " (Cfreq=%lld Tfreq=%lld)\n", mcbs, core_freq, tod_freq); /* Bake that all into TFMR */ base_tfmr = SETFIELD(SPR_TFMR_MAX_CYC_BET_STEPS, base_tfmr, mcbs); base_tfmr = SETFIELD(SPR_TFMR_N_CLKS_PER_STEP, base_tfmr, 0); base_tfmr = SETFIELD(SPR_TFMR_SYNC_BIT_SEL, base_tfmr, 4); } static bool chiptod_mod_tb(void) { uint64_t tfmr = base_tfmr; uint64_t timeout = 0; /* Switch timebase to "Not Set" state */ mtspr(SPR_TFMR, tfmr | SPR_TFMR_LOAD_TOD_MOD); do { if (++timeout >= (TIMEOUT_LOOPS*2)) { prerror("CHIPTOD: TB \"Not Set\" timeout\n"); return false; } tfmr = mfspr(SPR_TFMR); if (tfmr & SPR_TFMR_TFMR_CORRUPT) { prerror("CHIPTOD: TB \"Not Set\" TFMR corrupt\n"); return false; } if (GETFIELD(SPR_TFMR_TBST_ENCODED, tfmr) == 9) { prerror("CHIPTOD: TB \"Not Set\" TOD in error state\n"); return false; } } while(tfmr & SPR_TFMR_LOAD_TOD_MOD); return true; } static bool chiptod_interrupt_check(void) { uint64_t tfmr = mfspr(SPR_TFMR); uint64_t timeout = 0; do { if (++timeout >= TIMEOUT_LOOPS) { prerror("CHIPTOD: Interrupt check fail\n"); return false; } tfmr = mfspr(SPR_TFMR); if (tfmr & SPR_TFMR_TFMR_CORRUPT) { prerror("CHIPTOD: Interrupt check TFMR corrupt !\n"); return false; } } while(tfmr & SPR_TFMR_CHIP_TOD_INTERRUPT); return true; } static bool chiptod_running_check(void) { uint64_t tval; if (xscom_readme(TOD_CHIPTOD_FSM, &tval) != 0) { prerror("CHIPTOD: XSCOM error polling run\n"); return false; } if (tval & 0x0800000000000000UL) return true; else return false; } static bool chiptod_poll_running(void) { uint64_t timeout = 0; uint64_t tval; /* Chip TOD running check */ do { if (++timeout >= TIMEOUT_LOOPS) { prerror("CHIPTOD: Running check fail timeout\n"); return false; } if (xscom_readme(TOD_CHIPTOD_FSM, &tval) != 0) { prerror("CHIPTOD: XSCOM error polling run\n"); return false; } } while(!(tval & 0x0800000000000000UL)); return true; } static bool chiptod_to_tb(void) { uint64_t tval, tfmr, tvbits; uint64_t timeout = 0; /* Tell the ChipTOD about our fabric address * * The pib_master value is calculated from the CPU core ID, given in * the PIR. Because we have different core/thread arrangements in the * PIR between p7 and p8, we need to do the calculation differently. * * p7: 0b00001 || 3-bit core id * p8: 0b0001 || 4-bit core id */ if (xscom_readme(TOD_PIB_MASTER, &tval) != 0) { prerror("CHIPTOD: XSCOM error reading PIB_MASTER\n"); return false; } if (chiptod_type == chiptod_p8) { tvbits = (this_cpu()->pir >> 3) & 0xf; tvbits |= 0x10; } else { tvbits = (this_cpu()->pir >> 2) & 0x7; tvbits |= 0x08; } tval &= ~TOD_PIBM_ADDR_CFG_MCAST; tval = SETFIELD(TOD_PIBM_ADDR_CFG_SLADDR, tval, tvbits); if (xscom_writeme(TOD_PIB_MASTER, tval) != 0) { prerror("CHIPTOD: XSCOM error writing PIB_MASTER\n"); return false; } /* Make us ready to get the TB from the chipTOD */ mtspr(SPR_TFMR, base_tfmr | SPR_TFMR_MOVE_CHIP_TOD_TO_TB); /* Tell the ChipTOD to send it */ if (xscom_writeme(TOD_CHIPTOD_TO_TB, (1ULL << 63)) != 0) { prerror("CHIPTOD: XSCOM error writing CHIPTOD_TO_TB\n"); return false; } /* Wait for it to complete */ timeout = 0; do { if (++timeout >= TIMEOUT_LOOPS) { prerror("CHIPTOD: Chip to TB timeout\n"); return false; } tfmr = mfspr(SPR_TFMR); if (tfmr & SPR_TFMR_TFMR_CORRUPT) { prerror("CHIPTOD: MoveToTB: corrupt TFMR !\n"); return false; } } while(tfmr & SPR_TFMR_MOVE_CHIP_TOD_TO_TB); return true; } static bool chiptod_check_tb_running(void) { /* We used to wait for two SYNC pulses in TFMR but that * doesn't seem to occur in sim, so instead we use a * method similar to what pHyp does which is to check for * TFMR SPR_TFMR_TB_VALID and not SPR_TFMR_TFMR_CORRUPT */ #if 0 uint64_t tfmr, timeout; unsigned int i; for (i = 0; i < 2; i++) { tfmr = mfspr(SPR_TFMR); tfmr &= ~SPR_TFMR_TB_SYNC_OCCURED; mtspr(SPR_TFMR, tfmr); timeout = 0; do { if (++timeout >= TIMEOUT_LOOPS) { prerror("CHIPTOD: No sync pulses\n"); return false; } tfmr = mfspr(SPR_TFMR); } while(!(tfmr & SPR_TFMR_TB_SYNC_OCCURED)); } #else uint64_t tfmr = mfspr(SPR_TFMR); return (tfmr & SPR_TFMR_TB_VALID) && !(tfmr & SPR_TFMR_TFMR_CORRUPT); #endif return true; } static bool chiptod_reset_tb_errors(void) { uint64_t tfmr; unsigned long timeout = 0; /* Ask for automatic clear of errors */ tfmr = base_tfmr | SPR_TFMR_CLEAR_TB_ERRORS; /* Additionally pHyp sets these (write-1-to-clear ?) */ tfmr |= SPR_TFMR_TB_MISSING_SYNC; tfmr |= SPR_TFMR_TB_MISSING_STEP; tfmr |= SPR_TFMR_TB_RESIDUE_ERR; tfmr |= SPR_TFMR_FW_CONTROL_ERR; tfmr |= SPR_TFMR_CHIP_TOD_PARITY_ERR; mtspr(SPR_TFMR, tfmr); /* We have to write "Clear TB Errors" again */ tfmr = base_tfmr | SPR_TFMR_CLEAR_TB_ERRORS; mtspr(SPR_TFMR, tfmr); do { if (++timeout >= TIMEOUT_LOOPS) { /* Don't actually do anything on error for * now ... not much we can do, panic maybe ? */ prerror("CHIPTOD: TB error reset timeout !\n"); return false; } tfmr = mfspr(SPR_TFMR); if (tfmr & SPR_TFMR_TFMR_CORRUPT) { prerror("CHIPTOD: TB error reset: corrupt TFMR !\n"); return false; } } while(tfmr & SPR_TFMR_CLEAR_TB_ERRORS); return true; } static void chiptod_cleanup_thread_tfmr(void) { uint64_t tfmr = base_tfmr; tfmr |= SPR_TFMR_PURR_PARITY_ERR; tfmr |= SPR_TFMR_SPURR_PARITY_ERR; tfmr |= SPR_TFMR_DEC_PARITY_ERR; tfmr |= SPR_TFMR_TFMR_CORRUPT; tfmr |= SPR_TFMR_PURR_OVERFLOW; tfmr |= SPR_TFMR_SPURR_OVERFLOW; mtspr(SPR_TFMR, tfmr); } static void chiptod_reset_tod_errors(void) { uint64_t terr; /* * At boot, we clear the errors that the firmware is * supposed to handle. List provided by the pHyp folks. */ terr = TOD_ERR_CRITC_PARITY; terr |= TOD_ERR_PSS_HAMMING_DISTANCE; terr |= TOD_ERR_DELAY_COMPL_PARITY; terr |= TOD_ERR_CTCR_PARITY; terr |= TOD_ERR_TOD_SYNC_CHECK; terr |= TOD_ERR_TOD_FSM_PARITY; terr |= TOD_ERR_TOD_REGISTER_PARITY; if (xscom_writeme(TOD_ERROR, terr) != 0) { prerror("CHIPTOD: XSCOM error writing TOD_ERROR !\n"); /* Not much we can do here ... abort ? */ } } static void chiptod_sync_master(void *data) { bool *result = data; prlog(PR_DEBUG, "CHIPTOD: Master sync on CPU PIR 0x%04x...\n", this_cpu()->pir); /* Apply base tfmr */ mtspr(SPR_TFMR, base_tfmr); /* From recipe provided by pHyp folks, reset various errors * before attempting the sync */ chiptod_reset_tb_errors(); /* Cleanup thread tfmr bits */ chiptod_cleanup_thread_tfmr(); /* Reset errors in the chiptod itself */ chiptod_reset_tod_errors(); /* Switch timebase to "Not Set" state */ if (!chiptod_mod_tb()) goto error; prlog(PR_INSANE, "SYNC MASTER Step 2 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Chip TOD step checkers enable */ if (xscom_writeme(TOD_TTYPE_2, (1UL << 63)) != 0) { prerror("CHIPTOD: XSCOM error enabling steppers\n"); goto error; } prlog(PR_INSANE, "SYNC MASTER Step 3 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Chip TOD interrupt check */ if (!chiptod_interrupt_check()) goto error; prlog(PR_INSANE, "SYNC MASTER Step 4 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Switch local chiptod to "Not Set" state */ if (xscom_writeme(TOD_LOAD_TOD_MOD, (1UL << 63)) != 0) { prerror("CHIPTOD: XSCOM error sending LOAD_TOD_MOD\n"); goto error; } /* Switch all remote chiptod to "Not Set" state */ if (xscom_writeme(TOD_TTYPE_5, (1UL << 63)) != 0) { prerror("CHIPTOD: XSCOM error sending TTYPE_5\n"); goto error; } /* Chip TOD load initial value */ if (xscom_writeme(TOD_CHIPTOD_LOAD_TB, INIT_TB) != 0) { prerror("CHIPTOD: XSCOM error setting init TB\n"); goto error; } prlog(PR_INSANE, "SYNC MASTER Step 5 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); if (!chiptod_poll_running()) goto error; prlog(PR_INSANE, "SYNC MASTER Step 6 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Move chiptod value to core TB */ if (!chiptod_to_tb()) goto error; prlog(PR_INSANE, "SYNC MASTER Step 7 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Send local chip TOD to all chips TOD */ if (xscom_writeme(TOD_TTYPE_4, (1ULL << 63)) != 0) { prerror("CHIPTOD: XSCOM error sending TTYPE_4\n"); goto error; } /* Check if TB is running */ if (!chiptod_check_tb_running()) goto error; prlog(PR_INSANE, "Master sync completed, TB=%lx\n", mfspr(SPR_TBRL)); /* * A little delay to make sure the remote chips get up to * speed before we start syncing them. * * We have to do it here because we know our TB is running * while the boot thread TB might not yet. */ time_wait_ms(1); *result = true; return; error: prerror("CHIPTOD: Master sync failed! TFMR=0x%016lx\n", mfspr(SPR_TFMR)); *result = false; } static void chiptod_sync_slave(void *data) { bool *result = data; /* Only get primaries, not threads */ if (this_cpu()->is_secondary) { /* On secondaries we just cleanup the TFMR */ chiptod_cleanup_thread_tfmr(); *result = true; return; } prlog(PR_DEBUG, "CHIPTOD: Slave sync on CPU PIR 0x%04x...\n", this_cpu()->pir); /* Apply base tfmr */ mtspr(SPR_TFMR, base_tfmr); /* From recipe provided by pHyp folks, reset various errors * before attempting the sync */ chiptod_reset_tb_errors(); /* Cleanup thread tfmr bits */ chiptod_cleanup_thread_tfmr(); /* Switch timebase to "Not Set" state */ if (!chiptod_mod_tb()) goto error; prlog(PR_INSANE, "SYNC SLAVE Step 2 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Chip TOD running check */ if (!chiptod_poll_running()) goto error; prlog(PR_INSANE, "SYNC SLAVE Step 3 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Chip TOD interrupt check */ if (!chiptod_interrupt_check()) goto error; prlog(PR_INSANE, "SYNC SLAVE Step 4 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Move chiptod value to core TB */ if (!chiptod_to_tb()) goto error; prlog(PR_INSANE, "SYNC SLAVE Step 5 TFMR=0x%016lx\n", mfspr(SPR_TFMR)); /* Check if TB is running */ if (!chiptod_check_tb_running()) goto error; prlog(PR_INSANE, "Slave sync completed, TB=%lx\n", mfspr(SPR_TBRL)); *result = true; return; error: prerror("CHIPTOD: Slave sync failed ! TFMR=0x%016lx\n", mfspr(SPR_TFMR)); *result = false; } bool chiptod_wakeup_resync(void) { if (chiptod_primary < 0) return 0; lock(&chiptod_lock); /* Apply base tfmr */ mtspr(SPR_TFMR, base_tfmr); /* From recipe provided by pHyp folks, reset various errors * before attempting the sync */ chiptod_reset_tb_errors(); /* Cleanup thread tfmr bits */ chiptod_cleanup_thread_tfmr(); /* Switch timebase to "Not Set" state */ if (!chiptod_mod_tb()) goto error; /* Move chiptod value to core TB */ if (!chiptod_to_tb()) goto error; unlock(&chiptod_lock); return true; error: prerror("CHIPTOD: Resync failed ! TFMR=0x%16lx\n", mfspr(SPR_TFMR)); unlock(&chiptod_lock); return false; } static int chiptod_recover_tod_errors(void) { uint64_t terr; /* Read TOD error register */ if (xscom_readme(TOD_ERROR, &terr) != 0) { prerror("CHIPTOD: XSCOM error reading TOD_ERROR reg\n"); return 0; } /* Check for sync check error and recover */ if ((terr & TOD_ERR_TOD_SYNC_CHECK) || (terr & TOD_ERR_TOD_FSM_PARITY) || (terr & TOD_ERR_CTCR_PARITY) || (terr & TOD_ERR_PSS_HAMMING_DISTANCE) || (terr & TOD_ERR_DELAY_COMPL_PARITY) || (terr & TOD_ERR_TOD_REGISTER_PARITY)) { chiptod_reset_tod_errors(); return 1; } return 0; } /* * Sync up TOD with other chips and get TOD in running state. * For non-master, we request TOD value from another chip. * For master chip, Switch the topology to recover. */ static int chiptod_start_tod(void) { /* Handle TOD recovery on master chip. */ if (this_cpu()->chip_id == chiptod_primary) { /* * TOD is not running on master chip. We need to sync with * secondary chip TOD. But before we do that we need to * switch topology to make backup master as the new * active master. Once we switch the topology we can * then request TOD value from new master chip TOD. * But make sure we move local chiptod to Not Set before * request TOD value. */ if (xscom_writeme(TOD_TTYPE_1, (1UL << 63)) != 0) { prerror("CHIPTOD: XSCOM error switching primary/secondary\n"); return 0; } chiptod_primary = chiptod_secondary; chiptod_secondary = this_cpu()->chip_id; } /* Switch local chiptod to "Not Set" state */ if (xscom_writeme(TOD_LOAD_TOD_MOD, (1UL << 63)) != 0) { prerror("CHIPTOD: XSCOM error sending LOAD_TOD_MOD\n"); return 0; } /* * Request the current TOD value from another chip. * This will move TOD in running state */ if (xscom_writeme(TOD_TTYPE_3, (1UL << 63)) != 0) { prerror("CHIPTOD: XSCOM error sending TTYPE_3\n"); return 0; } /* Check if chip TOD is running. */ if (!chiptod_poll_running()) return 0; return 1; } /* * Recover from TB and TOD errors. * Timebase register is per core and first thread that gets chance to * handle interrupt would fix actual TFAC errors and rest of the threads * from same core would see no errors. Return -1 if no errors have been * found. The caller (handle_hmi_exception) of this function would not * send an HMI event to host if return value is -1. * * Return values: * 0 <= Failed to recover from errors * 1 <= Successfully recovered from errors * -1 <= No errors found. Errors are already been fixed. */ int chiptod_recover_tb_errors(void) { uint64_t tfmr; int rc = -1; if (chiptod_primary < 0) return 0; lock(&chiptod_lock); /* Get fresh copy of TFMR */ tfmr = mfspr(SPR_TFMR); /* * Check for TB errors. * On Sync check error, bit 44 of TFMR is set. Check for it and * clear it. */ if ((tfmr & SPR_TFMR_TB_MISSING_STEP) || (tfmr & SPR_TFMR_TB_RESIDUE_ERR) || (tfmr & SPR_TFMR_FW_CONTROL_ERR) || (tfmr & SPR_TFMR_CHIP_TOD_PARITY_ERR) || (tfmr & SPR_TFMR_TB_MISSING_SYNC)) { if (!chiptod_reset_tb_errors()) { rc = 0; goto error_out; } } /* * Check for TOD sync check error. * On TOD errors, bit 51 of TFMR is set. If this bit is on then we * need to fetch TOD error register and recover from TOD errors. * Bit 33 of TOD error register indicates sync check error. */ if (tfmr & SPR_TFMR_CHIP_TOD_INTERRUPT) rc = chiptod_recover_tod_errors(); /* Check if TB is running. If not then we need to get it running. */ if (!(tfmr & SPR_TFMR_TB_VALID)) { rc = 0; /* Place TB in Notset state. */ if (!chiptod_mod_tb()) goto error_out; /* * Before we move TOD to core TB check if TOD is running. * If not, then get TOD in running state. */ if (!chiptod_running_check()) if (!chiptod_start_tod()) goto error_out; /* Move chiptod value to core TB */ if (!chiptod_to_tb()) goto error_out; /* We have successfully able to get TB running. */ rc = 1; } error_out: unlock(&chiptod_lock); return rc; } static int64_t opal_resync_timebase(void) { if (!chiptod_wakeup_resync()) { prerror("OPAL: Resync timebase failed on CPU 0x%04x\n", this_cpu()->pir); return OPAL_HARDWARE; } return OPAL_SUCCESS; } opal_call(OPAL_RESYNC_TIMEBASE, opal_resync_timebase, 0); static void chiptod_print_tb(void *data __unused) { prlog(PR_DEBUG, "CHIPTOD: PIR 0x%04x TB=%lx\n", this_cpu()->pir, mfspr(SPR_TBRL)); } static bool chiptod_probe(u32 master_cpu) { struct dt_node *np; dt_for_each_compatible(dt_root, np, "ibm,power-chiptod") { uint32_t chip; /* Old DT has chip-id in chiptod node, newer only in the * parent xscom bridge */ chip = dt_get_chip_id(np); if (dt_has_node_property(np, "primary", NULL)) { chiptod_primary = chip; if (dt_node_is_compatible(np,"ibm,power7-chiptod")) chiptod_type = chiptod_p7; if (dt_node_is_compatible(np,"ibm,power8-chiptod")) chiptod_type = chiptod_p8; } if (dt_has_node_property(np, "secondary", NULL)) chiptod_secondary = chip; } /* * If ChipTOD isn't found in the device-tree, we fallback * based on the master CPU passed by OPAL boot since the * FSP strips off the ChipTOD info from the HDAT when booting * in OPAL mode :-( */ if (chiptod_primary < 0) { struct cpu_thread *t = find_cpu_by_pir(master_cpu); prlog(PR_WARNING, "CHIPTOD: Cannot find a primary TOD in device-tree\n"); prlog(PR_WARNING, "CHIPTOD: Falling back to Master CPU: %d\n", master_cpu); if (!t) { prerror("CHIPTOD: NOT FOUND !\n"); return false; } chiptod_primary = t->chip_id; switch(proc_gen) { case proc_gen_p7: chiptod_type = chiptod_p7; return true; case proc_gen_p8: chiptod_type = chiptod_p8; return true; default: break; } prerror("CHIPTOD: Unknown fallback CPU type !\n"); return false; } if (chiptod_type == chiptod_unknown) { prerror("CHIPTOD: Unknown TOD type !\n"); return false; } return true; } void chiptod_init(u32 master_cpu) { struct cpu_thread *cpu0, *cpu; bool sres; /* Mambo doesn't simulate the chiptod */ if (is_mambo_chip) return; op_display(OP_LOG, OP_MOD_CHIPTOD, 0); if (!chiptod_probe(master_cpu)) { prerror("CHIPTOD: Failed ChipTOD detection !\n"); op_display(OP_FATAL, OP_MOD_CHIPTOD, 0); abort(); } op_display(OP_LOG, OP_MOD_CHIPTOD, 1); /* Pick somebody on the primary */ cpu0 = find_cpu_by_chip_id(chiptod_primary); /* Calculate the base TFMR value used for everybody */ chiptod_setup_base_tfmr(); prlog(PR_DEBUG, "CHIPTOD: Base TFMR=0x%016llx\n", base_tfmr); /* Schedule master sync */ sres = false; cpu_wait_job(cpu_queue_job(cpu0, chiptod_sync_master, &sres), true); if (!sres) { op_display(OP_FATAL, OP_MOD_CHIPTOD, 2); abort(); } op_display(OP_LOG, OP_MOD_CHIPTOD, 2); /* Schedule slave sync */ for_each_available_cpu(cpu) { /* Skip master */ if (cpu == cpu0) continue; /* Queue job */ sres = false; cpu_wait_job(cpu_queue_job(cpu, chiptod_sync_slave, &sres), true); if (!sres) { op_display(OP_WARN, OP_MOD_CHIPTOD, 3|(cpu->pir << 8)); /* Disable threads */ cpu_disable_all_threads(cpu); } op_display(OP_LOG, OP_MOD_CHIPTOD, 3|(cpu->pir << 8)); } /* Display TBs */ for_each_available_cpu(cpu) { /* Only do primaries, not threads */ if (cpu->is_secondary) continue; cpu_wait_job(cpu_queue_job(cpu, chiptod_print_tb, NULL), true); } op_display(OP_LOG, OP_MOD_CHIPTOD, 4); }