/* Copyright 2013-2017 IBM Corp. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or * implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __SPIRA_H #define __SPIRA_H #include "hdif.h" /* * To help the FSP to distinguish between physical address and TCE mapped address. * Also to help hostboot to distinguish physical and relative address. */ #define HRMOR_BIT (1ul << 63) /* * The SPIRA structure * * NOTE: This is one of the only HDIF structure that we layout entirely * as a C struct because it's provided by us to the FSP. Almost everything * else is generated by the FSP, and thus must be "parsed" since the various * offsets and alignments might change. */ #define SPIRA_VERSION 0x20 /* Like 730 ? */ struct spira_ntuple { __be64 addr; __be16 alloc_cnt; __be16 act_cnt; __be32 alloc_len; __be32 act_len; __be32 tce_off; __be64 padding; } __packed; #define SPIRA_NTUPLES_COUNT 0x19 struct spira_ntuples { struct HDIF_array_hdr array_hdr; struct spira_ntuple sp_subsys; /* 0x040 */ struct spira_ntuple ipl_parms; /* 0x060 */ struct spira_ntuple nt_enclosure_vpd; /* 0x080 */ struct spira_ntuple slca; /* 0x0a0 */ struct spira_ntuple backplane_vpd; /* 0x0c0 */ struct spira_ntuple system_vpd; /* 0x0e0 */ struct spira_ntuple chip_tod; /* 0x100 */ struct spira_ntuple proc_init; /* 0x120 */ struct spira_ntuple clock_vpd; /* 0x140 */ struct spira_ntuple anchor_vpd; /* 0x160 */ struct spira_ntuple op_panel_vpd; /* 0x180 */ struct spira_ntuple ext_cache_fru_vpd; /* 0x1a0 */ struct spira_ntuple misc_cec_fru_vpd; /* 0x1c0 */ struct spira_ntuple paca; /* 0x1e0 */ struct spira_ntuple ms_vpd; /* 0x200 */ struct spira_ntuple cec_iohub_fru; /* 0x220 */ struct spira_ntuple cpu_ctrl; /* 0x240 */ struct spira_ntuple mdump_src; /* 0x260 */ struct spira_ntuple mdump_dst; /* 0x280 */ struct spira_ntuple mdump_res; /* 0x2a0 */ struct spira_ntuple heap; /* 0x2c0 */ struct spira_ntuple pcia; /* 0x2e0 */ struct spira_ntuple proc_chip; /* 0x300 */ struct spira_ntuple hs_data; /* 0x320 */ struct spira_ntuple ipmi_sensor; /* 0x360 */ struct spira_ntuple node_stb_data; /* 0x380 */ }; struct spira { struct HDIF_common_hdr hdr; struct HDIF_idata_ptr ntuples_ptr; __be64 pad; struct spira_ntuples ntuples; /* * We reserve 0xc0 rather than 0x4c0 so we fit SPIRAH/SPIRAS here * while preserving compatibility with existing P7/P8 systems. * * According to FSP engineers, this is an okay thing to do. */ u8 reserved[0x80]; } __packed __align(0x100); extern struct spira spira; /* SPIRA-H signature */ #define SPIRAH_HDIF_SIG "SPIRAH" /* First version of the secure boot compliant design. */ #define SPIRAH_VERSION 0x50 /* N-tuples in SPIRAH */ #define SPIRAH_NTUPLES_COUNT 0x6 struct spirah_ntuples { struct HDIF_array_hdr array_hdr; /* 0x030 */ struct spira_ntuple hs_data_area; /* 0x040 */ struct spira_ntuple proc_init; /* 0x060 */ struct spira_ntuple cpu_ctrl; /* 0x080 */ struct spira_ntuple mdump_src; /* 0x0a0 */ struct spira_ntuple mdump_dst; /* 0x0c0 */ struct spira_ntuple mdump_res; /* 0x0e0 */ struct spira_ntuple proc_dump_area; /* 0x100 */ }; struct spirah { struct HDIF_common_hdr hdr; struct HDIF_idata_ptr ntuples_ptr; __be64 pad; struct spirah_ntuples ntuples; u8 reserved[0xE0]; } __packed __align(0x100); extern struct spirah spirah; /* SPIRA-S signature */ #define SPIRAS_HDIF_SIG "SPIRAS" /* First version on 810 release */ #define SPIRAS_VERSION_P8 0x40 #define SPIRAS_VERSION_P9 0x50 /* N-tuples in SPIRAS */ #define SPIRAS_NTUPLES_COUNT 0x10 struct spiras_ntuples { struct HDIF_array_hdr array_hdr; /* 0x030 */ struct spira_ntuple sp_subsys; /* 0x040 */ struct spira_ntuple ipl_parms; /* 0x060 */ struct spira_ntuple nt_enclosure_vpd; /* 0x080 */ struct spira_ntuple slca; /* 0x0a0 */ struct spira_ntuple backplane_vpd; /* 0x0c0 */ struct spira_ntuple system_vpd; /* 0x0e0 */ struct spira_ntuple clock_vpd; /* 0x100 */ struct spira_ntuple anchor_vpd; /* 0x120 */ struct spira_ntuple op_panel_vpd; /* 0x140 */ struct spira_ntuple misc_cec_fru_vpd; /* 0x160 */ struct spira_ntuple ms_vpd; /* 0x180 */ struct spira_ntuple cec_iohub_fru; /* 0x1a0 */ struct spira_ntuple pcia; /* 0x1c0 */ struct spira_ntuple proc_chip; /* 0x1e0 */ struct spira_ntuple hs_data; /* 0x200 */ struct spira_ntuple hbrt_data; /* 0x220 */ struct spira_ntuple ipmi_sensor; /* 0x240 */ struct spira_ntuple node_stb_data; /* 0x260 */ }; struct spiras { struct HDIF_common_hdr hdr; struct HDIF_idata_ptr ntuples_ptr; __be64 pad; struct spiras_ntuples ntuples; u8 reserved[0x180]; } __packed __align(0x100); extern struct spiras *spiras; /* This macro can be used to check the validity of a pointer returned * by one of the HDIF API functions. It returns true if the pointer * appears valid. If it's not valid and not NULL, it will print some * error in the log as well. */ #define CHECK_SPPTR(_ptr) spira_check_ptr(_ptr, __FILE__, __LINE__) #define get_hdif(ntuple, id) __get_hdif((ntuple), (id), __FILE__, __LINE__) extern struct HDIF_common_hdr *__get_hdif(struct spira_ntuple *n, const char id[], const char *file, int line); #define for_each_ntuple_idx(_ntuples, _p, _idx, _id) \ for (_p = get_hdif((_ntuples), _id ""), _idx = 0; \ _p && _idx < be16_to_cpu((_ntuples)->act_cnt); \ _p = (void *)_p + be32_to_cpu((_ntuples)->alloc_len), _idx++) #define for_each_ntuple(_ntuples, _p, _id) \ for (_p = get_hdif((_ntuples), _id ""); \ _p && (void *)_p < ntuple_addr(_ntuples) \ + (be16_to_cpu((_ntuples)->act_cnt) * \ be32_to_cpu((_ntuples)->alloc_len)); \ _p = (void *)_p + be32_to_cpu((_ntuples)->alloc_len)) #define for_each_paca(p) for_each_ntuple(&spira.ntuples.paca, p, PACA_HDIF_SIG) #define for_each_pcia(p) for_each_ntuple(&spira.ntuples.pcia, p, SPPCIA_HDIF_SIG) /* We override these for testing. */ #ifndef ntuple_addr #define ntuple_addr(_ntuples) ((void *)BE64_TO_CPU((_ntuples)->addr)) #endif #ifndef spira_check_ptr extern bool spira_check_ptr(const void *ptr, const char *file, unsigned int line); #endif struct proc_init_data { struct HDIF_common_hdr hdr; struct HDIF_idata_ptr regs_ptr; struct { __be64 nia; __be64 msr; __be64 nia_charm_time; __be64 msr_charm_time; } regs; } __packed __align(0x10); /* * The FRU ID structure is used in several tuples, so we * define it generically here */ struct spira_fru_id { __be16 slca_index; __be16 rsrc_id; /* formerly VPD port number */ } __packed; /* * The FRU operational status structure is used in several * tuples, so we define it generically here */ struct spira_fru_op_status { uint8_t flags; #define FRU_OP_STATUS_FLAG_USED 0x02 /* If 0 -> not used (redundant) */ #define FRU_OP_STATUS_FLAG_FUNCTIONAL 0x01 /* If 0 -> non-functional */ uint8_t reserved[3]; } __packed; /* * Move VPD related stuff to another file ... */ #define VPD_ID(_a, _b) ((_a) << 8 | (_b)) /* * Service Processor Subsystem Structure * * This structure contains several internal data blocks * describing the service processor(s) in the system */ #define SPSS_HDIF_SIG "SPINFO" /* Idata index 0 : FRU ID Data */ #define SPSS_IDATA_FRU_ID 0 /* Idata index 1 : Keyword VPD for the FSP instance */ #define SPSS_IDATA_KEYWORD_VPD 1 /* Idata index 2 : SP Implementation */ #define SPSS_IDATA_SP_IMPL 2 struct spss_sp_impl { __be16 hw_version; __be16 sw_version; __be16 func_flags; #define SPSS_SP_IMPL_FLAGS_INSTALLED 0x8000 #define SPSS_SP_IMPL_FLAGS_FUNCTIONAL 0x4000 #define SPSS_SP_IMPL_FLAGS_PRIMARY 0x2000 u8 chip_version; u8 reserved; u8 sp_family[64]; } __packed; /* Idata index 3 is deprecated */ /* Idata index 4 : SP Memory Locator */ #define SPSS_IDATA_SP_MEMLOC 4 /* Idata index 5 : SP I/O path array */ #define SPSS_IDATA_SP_IOPATH 5 /* An HDIF array of IO path */ struct spss_iopath { __be16 iopath_type; #define SPSS_IOPATH_TYPE_IOHUB_PHB 0x0001 #define SPSS_IOPATH_TYPE_PSI 0x0002 #define SPSS_IOPATH_TYPE_LPC 0x0003 union { struct { __be16 iohub_chip_inst; __be16 iohub_chip_port; __be16 phb_id; } __packed iohub_phb; struct { __be16 link_status; #define SPSS_IO_PATH_PSI_LINK_BAD_FRU 0x0000 #define SPSS_IO_PATH_PSI_LINK_CURRENT 0x0001 #define SPSS_IO_PATH_PSI_LINK_BACKUP 0x0002 u8 ml2_version; u8 reserved; __be16 slca_count; u8 slca_idx[16]; __be32 proc_chip_id; __be32 reserved2; __be64 gxhb_base; } __packed psi; struct { /* only populated after version 0x30 */ __be16 link_status; #define LPC_STATUS_STUFFED 0x0000 #define LPC_STATUS_ACTIVE 0x0001 uint8_t ml2_version; uint8_t reserved[3]; __be32 chip_id; __be32 io_bar; __be32 memory_bar; __be32 firmware_bar; __be32 internal_bar; __be32 reserved2; __be64 uart_base; __be32 uart_size; __be32 uart_clk; /* UART baud clock in Hz */ __be32 uart_baud; /* UART baud rate */ uint8_t uart_int_number; uint8_t uart_int_type; #define UART_INT_LVL_LOW 0x1 #define UART_INT_RISING 0x2 #define UART_INT_LVL_HIGH 0x3 uint8_t reserved3[2]; __be64 bt_base; __be32 bt_size; uint8_t bt_sms_int_num; uint8_t bt_bmc_response_int_num; uint8_t reserved4[2]; } __packed lpc; }; } __packed; /* * IPL Parms structure * */ /* Idata index 0: System Parameters */ #define IPLPARAMS_SYSPARAMS 0 struct iplparams_sysparams { char sys_model[4]; char cpu_feature_code[4]; __be32 effective_pvr; __be32 system_type; uint8_t num_lpar_oct[8]; __be32 abc_bus_speed; __be32 wxyz_bus_speed; __be32 sys_eco_mode; #define SYS_ATTR_MULTIPLE_TPM PPC_BIT32(0) #define SYS_ATTR_RISK_LEVEL PPC_BIT32(3) __be32 sys_attributes; __be32 mem_scrubbing; __be16 cur_spl_value; uint8_t pump_mode; /* Reserved */ uint8_t use_pore_sleep; __be32 pore_image_size; /* Reserved */ uint8_t vtpm_enabled; uint8_t hw_page_table_size; /* >= 0x59 */ __be16 hv_disp_wheel; /* >= 0x58 */ __be32 nest_freq_mhz; /* >= 0x5b */ uint8_t split_core_mode; /* >= 0x5c */ uint8_t reserved[3]; uint8_t sys_vendor[64]; /* >= 0x5f */ #define SEC_CONTAINER_SIG_CHECKING PPC_BIT16(0) #define SEC_HASHES_EXTENDED_TO_TPM PPC_BIT16(1) __be16 sys_sec_setting; /* >= 0x60 */ __be16 tpm_config_bit; /* >= 0x60 */ __be16 tpm_drawer; /* >= 0x60 */ __be16 hw_key_hash_size; /* >= 0x60 */ #define SYSPARAMS_HW_KEY_HASH_MAX 64 uint8_t hw_key_hash[SYSPARAMS_HW_KEY_HASH_MAX]; /* >= 0x60 */ uint8_t sys_family_str[64]; /* vendor,name */ uint8_t sys_type_str[64]; /* vendor,type */ } __packed; /* Idata index 1: IPL parameters */ #define IPLPARAMS_IPLPARAMS 1 struct iplparams_iplparams { uint8_t reserved; uint8_t hv_ipl_dest; uint8_t ipl_side; #define IPLPARAMS_CEC_FW_IPL_SIDE_TEMP 0x10 #define IPLPARAMS_FSP_FW_IPL_SIDE_TEMP 0x01 uint8_t ipl_speed; __be16 cec_ipl_attrib; uint8_t cec_ipl_maj_type; uint8_t cec_ipl_min_type; uint8_t os_ipl_mode; uint8_t keylock_pos; uint8_t lmb_size; uint8_t deprecated; __be32 max_hsl_opticonnect; __be32 other_attrib; #define IPLPARAMS_OATTR_RST_PCI_BUSNO 0x08000000 #define IPLPARAMS_OATTR_CLEAR_NVRAM 0x04000000 #define IPLPARAMS_OATRR_LIGHT_PATH 0x00000004 __be16 huge_page_count; uint8_t huge_page_size; #define IPLPARAMS_HUGE_PG_SIZE_16G 0 uint8_t num_vlan_switches; __be32 reserved2; __be32 enlarge_io; /* >= 0x5a */ uint8_t core_config; #define IPLPARAMS_CORE_NORMAL 0x00 #define IPLPARAMS_CORE_FUSE 0x01 } __packed; /* Idata index 4: Platform Dump Descriptor */ #define IPLPARAMS_PLATFORM_DUMP 4 struct iplparams_dump { __be16 flags; uint8_t reserved1; uint8_t policy; #define HYP_DUMP_POLICY_NORMAL 0x00 __be32 dump_id; __be64 reserved2; __be64 act_dump_sz; __be32 max_hw_dump_sz; __be32 act_hw_dump_sz; __be32 max_sp_dump_sz; __be32 plid; } __packed; /* Idata index 8: serial ports */ #define IPLPARMS_IDATA_SERIAL 8 /* An HDIF array of serial descriptions */ struct iplparms_serial { uint8_t loc_code[LOC_CODE_SIZE]; __be16 rsrc_id; __be16 flags; #define PLPARMS_SERIAL_FLAGS_CALLHOME 0x8000 } __packed; /* Idata index 9: FW features */ #define IPLPARAMS_FEATURES 9 struct iplparams_feature { char name[64]; __be64 flags; } __packed; /* * Chip TOD structure * * This is an array of 32 entries (I assume per possible chip) */ /* Idata index 0: Chip ID data (array) */ #define CHIPTOD_IDATA_CHIPID 0 struct chiptod_chipid { __be32 chip_id; __be32 flags; #define CHIPTOD_ID_FLAGS_PRIMARY 0x02 #define CHIPTOD_ID_FLAGS_SECONDARY 0x01 #define CHIPTOD_ID_FLAGS_STATUS_MASK 0x0c #define CHIPTOD_ID_FLAGS_STATUS_OK 0x04 #define CHIPTOD_ID_FLAGS_STATUS_NOK 0x08 } __packed; /* Idata index 0: Chip Initialization data */ #define CHIPTOD_IDATA_CHIPINIT 1 struct chiptod_chipinit { __be32 ctrl_reg_internal; __be32 tod_ctrl_reg; } __packed; /* * MS VPD - Memory Description Tree * * One such structure pointing to the various memory arrays * along with other infos about the BCRs, Page Mover, XSCOM,... */ #define MSVPD_HDIF_SIG "MS VPD" /* Idata index 0: Mainstore address config */ #define MSVPD_IDATA_MS_ADDR_CONFIG 0 /* Mainstore Address Configuration */ struct msvpd_ms_addr_config { __be64 max_configured_ms_address; __be64 max_possible_ms_address; __be32 deprecated; __be64 mirrorable_memory_starting_address; } __packed; /* Idata index 1: Total configured mainstore */ #define MSVPD_IDATA_TOTAL_CONFIG_MS 1 struct msvpd_total_config_ms { __be64 total_in_mb; } __packed; /* Idata index 2: Page mover and sync structure */ #define MSVPD_IDATA_PMOVER_SYNCHRO 2 struct msvpd_pmover_bsr_synchro { __be32 flags; #define MSVPD_PMS_FLAG_HWLOCK_EN 0x80000000 #define MSVPD_PMS_FLAG_PMOVER_EN 0x40000000 #define MSVPD_PMS_FLAG_BSR_EN 0x20000000 #define MSVPD_PMS_FLAG_XSCOMBASE_VALID 0x10000000 /* P7 values for BSR mode */ #define MSVPD_PMS_FLAG_P7BSR_1M_MODE 0x00000000 #define MSVPD_PMS_FLAG_P7BSR_2M_MODE 0x02000000 #define MSVPD_PMS_FLAG_P7BSR_4M_MODE 0x04000000 #define MSVPD_PMS_FLAG_P7BSR_8M_MODE 0x06000000 __be32 hwlocks_per_page; __be64 hwlock_addr; __be64 pmover_addr; __be64 bsr_addr; __be64 xscom_addr; } __packed; /* Idata index 3: Memory Trace Array */ #define MSVPD_IDATA_TRACE_AREAS 3 struct msvpd_trace { __be64 start, end; char reserved[16]; }; /* Idata index 4: UE Address Array */ /* Idata index 5: Hostboot reserved memory address range */ #define MSVPD_IDATA_HB_RESERVED_MEM 5 #define HB_RESERVE_MEM_LABEL_SIZE 64 struct msvpd_hb_reserved_mem { #define MSVPD_HBRMEM_RANGE_TYPE PPC_BITMASK32(0,7) #define HBRMEM_CONTAINER_VERIFICATION_CODE 0x3 __be32 type_instance; __be64 start_addr; __be64 end_addr; __be32 label_size; uint8_t label[HB_RESERVE_MEM_LABEL_SIZE]; uint8_t rw_perms; #define HB_RESERVE_READABLE 0x80 #define HB_RESERVE_WRITEABLE 0x40 uint8_t reserved[7]; } __packed; /* Child index 0: MS area child structure */ #define MSVPD_CHILD_MS_AREAS 0 /* * CEC I/O Hub FRU * * This is an array of CEC Hub FRU HDIF structures * * Each of these has some idata pointers to generic info about the * hub and a possible child pointer for daughter card. * * Actual ports are in the SLCA and need to be cross referenced * * Note that slots meant for the addition of GX+ adapters that * are currently unpopulated but support hotplug will have a * minimum "placeholder" entry, which will be fully populated * when the array is rebuild during concurrent maintenance. * This "placeholder" is called a "reservation". * * WARNING: The array rebuild by concurrent maintenance is not * guaranteed to be in the same order as the IPL array, not is * the order stable between concurrent maintenance operations. * * There's also a child pointer to daughter card structures but * we aren't going to handle that just yet. */ #define CECHUB_FRU_HDIF_SIG "IO HUB" #define IOKID_FRU_HDIF_SIG "IO KID" #define IOSLOT_FRU_HDIF_SIG "IOSLOT" /* Idata index 0: FRU ID data * * This is a generic struct spira_fru_id defined above */ #define CECHUB_FRU_ID_DATA 0 /* Idata index 1: ASCII Keyword VPD */ #define CECHUB_ASCII_KEYWORD_VPD 1 /* Idata index 2: Hub FRU ID data area */ #define CECHUB_FRU_ID_DATA_AREA 2 struct cechub_hub_fru_id { __be32 card_type; #define CECHUB_FRU_TYPE_IOHUB_RSRV 0 #define CECHUB_FRU_TYPE_IOHUB_CARD 1 #define CECHUB_FRU_TYPE_CPU_CARD 2 #define CECHUB_FRU_TYPE_CEC_BKPLANE 3 #define CECHUB_FRU_TYPE_BKPLANE_EXT 4 __be32 unused; __be16 total_chips; uint8_t flags; #define CECHUB_FRU_FLAG_HEADLESS 0x80 /* not connected to CPU */ #define CECHUB_FRU_FLAG_PASSTHROUGH 0x40 /* connected to passhtrough port of another hub */ uint8_t reserved; __be16 parent_hub_id; /* chip instance number of the hub that contains the passthrough port this one is connected to */ __be16 reserved2; } __packed; /* Idata index 3: IO HUB array */ #define CECHUB_FRU_IO_HUBS 3 /* This is an HDIF array of IO Hub structures */ struct cechub_io_hub { __be64 fmtc_address; __be32 fmtc_tce_size; __be16 hub_num; /* unique hub number (I/O Hub ID) */ uint8_t flags; #define CECHUB_HUB_FLAG_STATE_MASK 0xc0 #define CECHUB_HUB_FLAG_STATE_OK 0x00 #define CECHUB_HUB_FLAG_STATE_FAILURES 0x40 #define CECHUB_HUB_FLAG_STATE_NOT_INST 0x80 #define CECHUB_HUB_FLAG_STATE_UNUSABLE 0xc0 #define CECHUB_HUB_FLAG_MASTER_HUB 0x20 /* HDAT < v9.x only */ #define CECHUB_HUB_FLAG_GARD_MASK_VALID 0x08 /* HDAT < v9.x only */ #define CECHUB_HUB_FLAG_SWITCH_MASK_PDT 0x04 /* HDAT < v9.x only */ #define CECHUB_HUB_FLAG_FAB_BR0_PDT 0x02 /* HDAT < v9.x only */ #define CECHUB_HUB_FLAG_FAB_BR1_PDT 0x01 /* HDAT < v9.x only */ uint8_t nr_ports; /* HDAT < v9.x only */ uint8_t fab_br0_pdt; /* p5ioc2 PCI-X or P8 PHB3's */ #define CECHUB_HUB_FAB_BR0_PDT_PHB0 0x80 #define CECHUB_HUB_FAB_BR0_PDT_PHB1 0x40 #define CECHUB_HUB_FAB_BR0_PDT_PHB2 0x20 #define CECHUB_HUB_FAB_BR0_PDT_PHB3 0x10 #define CECHUB_HUB_FAB_BR0_PDT_PHB4 0x08 #define CECHUB_HUB_FAB_BR0_PDT_PHB5 0x04 uint8_t fab_br1_pdt; /* p5ioc2 & p7ioc PCI-E */ #define CECHUB_HUB_FAB_BR1_PDT_PHB0 0x80 #define CECHUB_HUB_FAB_BR1_PDT_PHB1 0x40 #define CECHUB_HUB_FAB_BR1_PDT_PHB2 0x20 #define CECHUB_HUB_FAB_BR1_PDT_PHB3 0x10 #define CECHUB_HUB_FAB_BR1_PDT_PHB4 0x08 /* p7ioc only */ #define CECHUB_HUB_FAB_BR1_PDT_PHB5 0x04 /* p7ioc only */ __be16 iohub_id; /* the type of hub */ #define CECHUB_HUB_P7IOC 0x60e7 /* from VPL3 */ #define CECHUB_HUB_MURANO 0x20ef /* Murano from spec */ #define CECHUB_HUB_MURANO_SEGU 0x0001 /* Murano+Seguso from spec */ #define CECHUB_HUB_VENICE_WYATT 0x0010 /* Venice+Wyatt from spec */ #define CECHUB_HUB_NIMBUS_SFORAZ 0x0020 /* Nimbus+sforaz from spec */ #define CECHUB_HUB_NIMBUS_MONZA 0x0021 /* Nimbus+monza from spec */ #define CECHUB_HUB_NIMBUS_LAGRANGE 0x0022 /* Nimbus+lagrange from spec */ #define CECHUB_HUB_CUMULUS_DUOMO 0x0031 /* cumulus+duomo from spec */ __be32 ec_level; __be32 aff_dom2; /* HDAT < v9.x only */ __be32 aff_dom3; /* HDAT < v9.x only */ __be64 reserved; __be32 proc_chip_id; union { /* HDAT < v9.x */ struct { __be32 gx_index; /* GX bus index on cpu */ __be32 buid_ext; /* BUID Extension */ __be32 xscom_chip_id; /* TORRENT ONLY */ }; /* HDAT >= v9.x */ struct { __be32 reserved1; __be32 reserved2; __be16 reserved3; __be16 hw_topology; }; }; __be32 mrid; __be32 mem_map_vers; union { /* HDAT < v9.x */ struct { __be64 gx_ctrl_bar0; __be64 gx_ctrl_bar1; __be64 gx_ctrl_bar2; __be64 gx_ctrl_bar3; __be64 gx_ctrl_bar4; __be32 sw_mask_pdt; __be16 gard_mask; __be16 gx_bus_speed; /* Version 0x58 */ }; /* HDAT >= v9.x, HDIF version 0x6A adds phb_lane_eq with four * words per PHB (4 PHBs). * * HDAT >= 10.x, HDIF version 0x7A adds space for another two * two PHBs (6 total) and the gen4 EQ values. */ struct { /* Gen 3 PHB eq values, 6 PHBs */ __be64 phb_lane_eq[6][4]; /* Gen 4 PHB eq values */ __be64 phb4_lane_eq[6][4]; }; }; } __packed; /* We support structures as small as 0x68 bytes */ #define CECHUB_IOHUB_MIN_SIZE 0x68 /* Child index 0: IO Daugther Card */ #define CECHUB_CHILD_IO_KIDS 0 /* Child index 1: PCIe Slot Mapping Information */ #define CECHUB_CHILD_IOSLOTS 1 #define IOSLOT_IDATA_SLOTMAP 0 struct slot_map_entry { __be16 entry_id; __be16 parent_id; uint8_t phb_index; /* only valid for ROOT and SWITCH_UP */ uint8_t type; #define SLOT_TYPE_ROOT_COMPLEX 0x0 #define SLOT_TYPE_SWITCH_UP 0x1 #define SLOT_TYPE_SWITCH_DOWN 0x2 #define SLOT_TYPE_BUILTIN 0x3 uint8_t lane_swapped; uint8_t reserved; __be16 lane_mask; __be16 lane_reverse; /* what can I do with this? reference something under/vpd/ ? */ __be16 slca_idx; __be16 mrw_slot_id; __be32 features; #define SLOT_FEAT_SLOT 0x1 uint8_t up_port; uint8_t down_port; /* the switch port this device is attached to */ __be32 vendor_id; __be32 device_id; __be32 sub_vendor_id; __be32 sub_device_id; char name[8]; } __packed; #define IOSLOT_IDATA_DETAILS 1 struct slot_map_details { __be16 entry; /* Phyp junk, ignore */ uint8_t mgc_load_source; uint8_t hddw_order; __be16 mmio_size_32; /* In MB */ __be16 mmio_size_64; __be16 dma_size_32; __be16 dma_size_64; uint8_t power_ctrl_type; /* slot power control source */ #define SLOT_PWR_NONE 0x0 #define SLOT_PWR_I2C 0x1 uint8_t presence_det_type; /* slot presence detect source */ #define SLOT_PRESENCE_NONE 0x0 #define SLOT_PRESENCE_PCI 0x1 #define SLOT_PRESENCE_I2C 0x2 uint8_t perst_ctl_type; /* slot PERST source */ #define SLOT_PERST_NONE 0x0 #define SLOT_PERST_PHB_OR_SW 0x1 #define SLOT_PERST_SW_GPIO 0x2 uint8_t perst_gpio; __be16 max_power; /* in W? */ __be32 slot_caps; #define SLOT_CAP_LSI 0x01 /* phyp junk? */ #define SLOT_CAP_CAPI 0x02 #define SLOT_CAP_CCARD 0x04 #define SLOT_CAP_HOTPLUG 0x08 #define SLOT_CAP_SRIOV 0x10 /* phyp junk */ #define SLOT_CAP_ELLOCO 0x20 /* why is this seperate from the nvlink cap? */ #define SLOT_CAP_NVLINK 0x30 __be16 reserved1; /* I2C Link IDs */ __be32 i2c_power_ctl; __be32 i2c_pgood; __be32 i2c_cable_card; /* opencapi presence detect? */ __be32 i2c_mex_fpga; }; /* * IO KID is a dauther card structure */ #define IOKID_FRU_ID_DATA 0 #define IOKID_KW_VPD 1 /* * CPU Controls Legacy Structure */ struct cpu_ctl_legacy { __be64 addr; __be64 size; } __packed; /* * CPU Control Legacy table * * Format of this table is defined in FIPS PHYP Attn spec. */ struct cpu_ctl_legacy_table { struct cpu_ctl_legacy spat; struct cpu_ctl_legacy sp_attn_area1; struct cpu_ctl_legacy sp_attn_area2; struct cpu_ctl_legacy hsr_area; struct cpu_ctl_legacy reserved[12]; } __packed; /* * CPU Controls Header Structure */ #define CPU_CTL_HDIF_SIG "CPUCTL" struct cpu_ctl_init_data { struct HDIF_common_hdr hdr; struct HDIF_idata_ptr cpu_ctl; uint8_t reserved[8]; struct cpu_ctl_legacy_table cpu_ctl_lt; } __packed __align(0x10); /* * Slot Location Code Array (aka SLCA) * * This is a pile of location codes referenced by various other * structures such as the IO Hubs for things on the CEC. Not * everything in there is a physical port. The SLCA is actually * a tree which represent the topology of the system. * * The tree works as follow: A parent has a pointer to the first * child. A child has a pointer to its parent. Siblings are * consecutive entries. * * Note: If we ever support concurrent maintenance... this is * completely rebuilt, invalidating all indices, though other * structures that may reference SLCA by index will be rebuilt * as well. * * Note that a lot of that stuff is based on VPD documentation * such as the identification keywords. I will list the ones * I manage to figure out without the doc separately. */ #define SLCA_HDIF_SIG "SLCA " /* Idata index 0 : SLCA root pointer * * The SLCA array is an HDIF array of all the entries. The tree * structure is based on indices inside the entries and order of * the entries */ #define SLCA_IDATA_ARRAY 0 #define SLCA_ROOT_INDEX 0 /* Note: An "index" (or idx) is always an index into the SLCA array * and "id" is a reference to some other object. */ struct slca_entry { __be16 my_index; /* redundant, useful */ __be16 rsrc_id; /* formerly VPD port number */ uint8_t fru_id[2]; /* ASCII VPD ID */ #define SLCA_ROOT_VPD_ID VPD_ID('V','V') #define SLCA_SYSTEM_VPD_ID VPD_ID('S','V') #define SLCA_SAI_INDICATOR_ID VPD_ID('S','A') __be16 parent_index; /* Parent entry index */ uint8_t flags; #define SLCA_FLAG_NON_FUNCTIONAL 0x02 /* For redundant entries */ #define SLCA_FLAG_IMBEDDED 0x01 /* not set => pluggable */ uint8_t old_nr_child; /* Legacy: Nr of children */ __be16 child_index; /* First child index */ __be16 child_rsrc_id; /* Resource ID of first child */ uint8_t loc_code_allen; /* Alloc len of loc code */ uint8_t loc_code_len; /* Loc code len */ uint8_t loc_code[LOC_CODE_SIZE]; /* NULL terminated (thus max 79 chr) */ __be16 first_dup_idx; /* First redundant resource index */ uint8_t nr_dups; /* Number of redundant entries */ uint8_t reserved; __be16 nr_child; /* New version */ uint8_t install_indic; /* Installed indicator */ #define SLCA_INSTALL_NO_HW_PDT 1 /* No HW presence detect */ #define SLCA_INSTALL_INSTALLED 2 #define SLCA_INSTALL_NOT_INSTALLED 3 uint8_t vpd_collected; #define SLCA_VPD_COLLECTED 2 #define SLCA_VPD_NOT_COLLECTED 3 } __packed; /* * System VPD */ #define SYSVPD_HDIF_SIG "SYSVPD" /* Idata index 0 : FRU ID Data */ #define SYSVPD_IDATA_FRU_ID 0 /* Idata index 1 : Keyword VPD */ #define SYSVPD_IDATA_KW_VPD 1 /* Idata index 2 : Operational status */ #define SYSVPD_IDATA_OP_STATUS 2 /* * FRU keyword VPD structure */ #define FRUVPD_HDIF_SIG "FRUVPD" /* Idata index 0 : FRU ID Data */ #define FRUVPD_IDATA_FRU_ID 0 /* Idata index 1 : Keyword VPD */ #define FRUVPD_IDATA_KW_VPD 1 /* Idata index 2 : Operational status */ #define FRUVPD_IDATA_OP_STATUS 2 /* * SPPACA structure. The SPIRA contain an array of these, one * per processor thread */ #define PACA_HDIF_SIG "SPPACA" /* Idata index 0 : FRU ID Data */ #define SPPACA_IDATA_FRU_ID 0 /* Idata index 1 : Keyword VPD */ #define SPPACA_IDATA_KW_VPD 1 /* Idata index 2 : CPU ID data area */ #define SPPACA_IDATA_CPU_ID 2 struct sppaca_cpu_id { __be32 pir; __be32 fru_id; __be32 hardware_proc_id; #define CPU_ID_VERIFY_MASK 0xC0000000 #define CPU_ID_VERIFY_SHIFT 30 #define CPU_ID_VERIFY_USABLE_NO_FAILURES 0 #define CPU_ID_VERIFY_USABLE_FAILURES 1 #define CPU_ID_VERIFY_NOT_INSTALLED 2 #define CPU_ID_VERIFY_UNUSABLE 3 #define CPU_ID_SECONDARY_THREAD 0x20000000 #define CPU_ID_PACA_RESERVED 0x10000000 #define CPU_ID_NUM_SECONDARY_THREAD_MASK 0x00FF0000 #define CPU_ID_NUM_SECONDARY_THREAD_SHIFT 16 __be32 verify_exists_flags; __be32 chip_ec_level; __be32 processor_chip_id; __be32 logical_processor_id; /* This is the resource number, too. */ __be32 process_interrupt_line; __be32 reserved1; __be32 hardware_module_id; __be64 ibase; __be32 deprecated1; __be32 physical_thread_id; __be32 deprecated2; __be32 ccm_node_id; /* This fields are not always present, check struct size */ #define SPIRA_CPU_ID_MIN_SIZE 0x40 __be32 hw_card_id; __be32 internal_drawer_node_id; __be32 drawer_book_octant_blade_id; __be32 memory_interleaving_scope; __be32 lco_target; } __packed; /* Idata index 3 : Timebase data */ #define SPPACA_IDATA_TIMEBASE 3 struct sppaca_cpu_timebase { __be32 cycle_time; __be32 time_base; __be32 actual_clock_speed; __be32 memory_bus_frequency; } __packed; /* Idata index 4 : Cache size structure */ #define SPPACA_IDATA_CACHE_SIZE 4 struct sppaca_cpu_cache { __be32 icache_size_kb; __be32 icache_line_size; __be32 l1_dcache_size_kb; __be32 l1_dcache_line_size; __be32 l2_dcache_size_kb; __be32 l2_line_size; __be32 l3_dcache_size_kb; __be32 l3_line_size; __be32 dcache_block_size; __be32 icache_block_size; __be32 dcache_assoc_sets; __be32 icache_assoc_sets; __be32 dtlb_entries; __be32 dtlb_assoc_sets; __be32 itlb_entries; __be32 itlb_assoc_sets; __be32 reservation_size; __be32 l2_cache_assoc_sets; __be32 l35_dcache_size_kb; __be32 l35_cache_line_size; } __packed; /* Idata index 6 : CPU Attributes */ #define SPPACA_IDATA_CPU_ATTR 6 #define sppaca_cpu_attr sppcia_cpu_attr /* * SPPCIA structure. The SPIRA contain an array of these, one * per processor core */ #define SPPCIA_HDIF_SIG "SPPCIA" /* Idata index 0 : Core unique data */ #define SPPCIA_IDATA_CORE_UNIQUE 0 /* NOTE: This is the same layout as "struct sppaca_cpu_id", * with essentially some fields removed and a reserved * field added */ struct sppcia_core_unique { __be32 reserved; __be32 proc_fru_id; __be32 hw_proc_id; __be32 verif_exist_flags; /* Same as PACA */ __be32 chip_ec_level; __be32 proc_chip_id; __be32 reserved2; __be32 reserved3; __be32 reserved4; __be32 hw_module_id; __be64 reserved5; __be32 reserved6; __be32 reserved7; __be32 reserved8; __be32 ccm_node_id; __be32 hw_card_id; __be32 internal_drawer_node_id; __be32 drawer_book_octant_blade_id; __be32 memory_interleaving_scope; __be32 lco_target; __be32 reserved9; } __packed; /* Idata index 1 : CPU Time base structure */ #define SPPCIA_IDATA_TIMEBASE 1 #define sppcia_cpu_timebase sppaca_cpu_timebase /* Idata index 2 : CPU Cache Size Structure */ #define SPPCIA_IDATA_CPU_CACHE 2 #define sppcia_cpu_cache sppaca_cpu_cache /* Idata index 3 : Thread Array Data * * HDIF array of */ #define SPPCIA_IDATA_THREAD_ARRAY 3 struct sppcia_cpu_thread { __be32 proc_int_line; __be32 phys_thread_id; __be64 ibase; __be32 pir; } __packed; /* Idata index 4 : CPU Attributes */ #define SPPCIA_IDATA_CPU_ATTR 4 struct sppcia_cpu_attr { #define CPU_ATTR_UNIFIED_PL1 0x80 #define CPU_ATTR_SPLIT_TLB 0x40 #define CPU_ATTR_TLBIA 0x20 #define CPU_ATTR_PERF_MONITOR 0x10 #define CPU_ATTR_EXTERN_CONT 0x02 __be32 attr; } __packed; /* * Processor Chip Related Data. The SPIRA contain an array of these, one * per chip */ #define SPPCRD_HDIF_SIG "SPPCRD" /* Idata index 0 : Chip info */ #define SPPCRD_IDATA_CHIP_INFO 0 struct sppcrd_chip_info { __be32 proc_chip_id; __be32 verif_exist_flags; #define CHIP_VERIFY_MASK 0xC0000000 #define CHIP_VERIFY_SHIFT 30 #define CHIP_VERIFY_USABLE_NO_FAILURES 0 #define CHIP_VERIFY_USABLE_FAILURES 1 #define CHIP_VERIFY_NOT_INSTALLED 2 #define CHIP_VERIFY_UNUSABLE 3 #define CHIP_VERIFY_MASTER_PROC PPC_BIT32(4) __be32 nx_state; __be32 pore_state; __be32 xscom_id; /* Version 0xA */ __be32 reserved; __be32 dbob_id; __be32 occ_state; /* Version 0xC - none of these are used */ __be32 processor_fru_id; __be32 chip_ec_level; __be32 hw_module_id; __be32 hw_card_id; __be32 internal_drawer_nid; __be32 ccm_nid; /* Version 0xD */ __be32 capp0_func_state; /* Version 0xE */ __be32 capp1_func_state; /* *possibly* from Version 0x20 - check spec */ __be32 stop_levels; /* From latest version (possibly 0x21 and later) */ __be32 sw_xstop_fir_scom; uint8_t sw_xstop_fir_bitpos; uint8_t reserved_1[3]; } __packed; /* Idata index 1 : Chip TOD */ #define SPPCRD_IDATA_CHIP_TOD 1 struct sppcrd_chip_tod { __be32 flags; /* CHIPTOD_ID_... values */ __be32 ctrl_reg_internal; __be32 tod_ctrl_reg; } __packed; /* Idata index 2 : FRU ID */ #define SPPCRD_IDATA_FRU_ID 2 /* Idata index 3 : ASCII Keyword data */ #define SPPCRD_IDATA_KW_VPD 3 /* Idata index 4 : Module VPD */ #define SPPCRD_IDATA_MODULE_VPD 4 /* Idata index 5 : Chip attached I2C devices */ #define SPPCRD_IDATA_HOST_I2C 5 /* Idata index 5 : Chip attached I2C devices */ #define SPPCRD_IDATA_PNOR 6 /* Idata index 6 : OpenCAPI/NVlink info */ #define SPPCRD_IDATA_SMP_LINK 7 struct sppcrd_smp_link { __be32 link_id; __be32 usage; #define SMP_LINK_USE_NONE 0 #define SMP_LINK_USE_DEVICE 1 #define SMP_LINK_USE_INTERPOSER 2 #define SMP_LINK_USE_DRAWER 3 #define SMP_LINK_USE_D2D 4 /* GPU to GPU */ __be32 brick_id; __be32 lane_mask; /* bonded pci slots (mostly a NVLink thing) */ __be16 pci_slot_idx; __be16 pci_sideband_slot_idx; __be16 slca_idx; /* SLCA index of the *external* port */ __be16 reserved; /* nvlink/ocapi detection devices */ __be32 i2c_link_cable; __be32 i2c_presence; __be32 i2c_micro; uint8_t link_speed; uint8_t occ_flag_bit; __be16 gpu_slca; } __packed; /* Idata index 8 : chip EC Level array */ #define SPPCRD_IDATA_EC_LEVEL 8 struct sppcrd_ecid { __be32 chip_id; __be32 ec_level; __be64 low; /* Processor ECID bit 0-63 */ __be64 high; /* Processor ECID bit 64-127 */ } __packed; /* * Host Services Data. */ #define HSERV_HDIF_SIG "HOSTSR" /* Idata index 0 : System attribute data */ #define HSERV_IDATA_SYS_ATTR 0 /* IPMI sensors mapping data */ #define IPMI_SENSORS_HDIF_SIG "FRUSE " /* Idata index 0 : Sensor mapping data */ #define IPMI_SENSORS_IDATA_SENSORS 0 struct ipmi_sensors_data { __be32 slca_index; uint8_t type; uint8_t id; __be16 reserved; } __packed; struct ipmi_sensors { __be32 count; struct ipmi_sensors_data data[]; } __packed; /* Idata index 1 : LED - sensors ID mapping data */ #define IPMI_SENSORS_IDATA_LED 1 /* * Node Secure and Trusted Boot Related Data */ #define STB_HDIF_SIG "TPMREL" /* * Idata index 0 : Secure Boot and TPM Instance Info * * There can be multiple entries with each entry corresponding to * a master processor that has a TPM device */ #define TPMREL_IDATA_SECUREBOOT_TPM_INFO 0 struct secureboot_tpm_info { __be32 chip_id; __be32 dbob_id; uint8_t locality1; uint8_t locality2; uint8_t locality3; uint8_t locality4; #define TPM_PRESENT_AND_FUNCTIONAL 0x01 #define TPM_PRESENT_AND_NOT_FUNCTIONAL 0x02 #define TPM_NOT_PRESENT 0x03 uint8_t tpm_status; uint8_t reserved[3]; /* zero indicates no tpm log data */ __be32 srtm_log_offset; __be32 srtm_log_size; /* zero indicates no tpm log data */ __be32 drtm_log_offset; __be32 drtm_log_size; } __packed; /* Idata index 2: Hash and Verification Function Offsets Array */ #define TPMREL_IDATA_HASH_VERIF_OFFSETS 2 struct hash_and_verification { #define TPMREL_HV_SHA512 0x00 #define TPMREL_HV_VERIFY 0x01 __be32 type; __be32 version; __be32 dbob_id; __be32 offset; } __packed; static inline const char *cpu_state(u32 flags) { switch ((flags & CPU_ID_VERIFY_MASK) >> CPU_ID_VERIFY_SHIFT) { case CPU_ID_VERIFY_USABLE_NO_FAILURES: return "OK"; case CPU_ID_VERIFY_USABLE_FAILURES: return "FAILURES"; case CPU_ID_VERIFY_NOT_INSTALLED: return "NOT-INSTALLED"; case CPU_ID_VERIFY_UNUSABLE: return "UNUSABLE"; } return "**UNKNOWN**"; } #endif /* __SPIRA_H */