aboutsummaryrefslogtreecommitdiff
path: root/include/opal-api.h
AgeCommit message (Expand)AuthorFilesLines
2018-08-06npu2: Add support for relaxed-ordering modeReza Arbab1-1/+3
2018-06-18NX: Add NX coprocessor init opal callHaren Myneni1-1/+2
2018-04-17opal/hmi: Add a new opal_handle_hmi2 that returns direct info to LinuxBenjamin Herrenschmidt1-0/+8
2018-03-14Reserve OPAL API number for opal_handle_hmi2 function.Mahesh Salgaonkar1-1/+2
2018-03-01phb4: set PBCQ Tunnel BAR for tunneled operationsPhilippe Bergheaud1-1/+3
2018-03-01npu2-opencapi: Add OpenCAPI OPAL API callsFrederic Barrat1-3/+3
2018-02-21opal-api: Re-jig OPAL API numbers because OpenCAPI kernel mergeStewart Smith1-3/+6
2018-02-21npu2/opal-api: move npu2 checkstop defines to npu2-regs.hStewart Smith1-98/+0
2018-02-21sensor-groups: occ: Add support to disable/enable sensor groupShilpasri G Bhat1-2/+3
2018-02-21sensors: Support reading u64 sensor valuesShilpasri G Bhat1-1/+2
2018-02-08hw/npu2: Implement logging HMI actionsBalbir Singh1-0/+98
2017-12-14opal-prd: occ: Add support for runtime OCC load/start in ZZShilpasri G Bhat1-0/+2
2017-12-14opal-prd: Add support for runtime OCC reset in ZZShilpasri G Bhat1-0/+11
2017-12-03core: Add support for quiescing OPALNicholas Piggin1-1/+8
2017-11-28xive: Define API for single-escalation VP modeBenjamin Herrenschmidt1-0/+1
2017-10-16cpu: Add OPAL_REINIT_CPUS_TM_SUSPEND_DISABLEDMichael Ellerman1-0/+2
2017-08-04phb4: Enable PCI peer-to-peerFrederic Barrat1-1/+12
2017-07-28sensors: occ: Add support to clear sensor groupsShilpasri G Bhat1-1/+2
2017-07-28psr: occ: Add support to change power-shifting-ratioShilpasri G Bhat1-1/+3
2017-07-28powercap: occ: Add a generic powercap frameworkShilpasri G Bhat1-1/+3
2017-07-28occ: Add support for OPAL-OCC command/response interfaceShilpasri G Bhat1-0/+1
2017-07-17skiboot: Fix comment around OPAL_IMC_COUNTERS_ enumMadhavan Srinivasan1-1/+1
2017-06-27skiboot: Add opal calls to init/start/stop IMC devicesAnju T Sudhakar1-1/+11
2017-06-26cpu: Support setting HID[RADIX] and set it by default on P9Benjamin Herrenschmidt1-0/+9
2017-06-19capi: Enable capi mode for PHB4Christophe Lombard1-0/+1
2017-06-08SBE: Add passthrough command supportVasant Hegde1-0/+4
2017-06-06opal-prd: Add firmware_request & firmware_notify implementationsJeremy Kerr1-0/+16
2017-04-19phb4: Implement diag dataRussell Currey1-2/+69
2017-03-30npu2: Add OPAL calls for nvlink2 address translation servicesAlistair Popple1-1/+4
2017-03-16xive: Add opal_xive_sync() to sync IRQ sources and queuesBenjamin Herrenschmidt1-0/+7
2017-03-07System reset IPI facility and Mambo implementationNicholas Piggin1-1/+2
2017-02-23xive: Add some dump facilityBenjamin Herrenschmidt1-2/+12
2017-01-16Reserve OPAL API numbers for XIVEStewart Smith1-1/+5
2017-01-05xive: Add *any chip* for allocating interruptsBenjamin Herrenschmidt1-0/+5
2017-01-05xive: Add support for EOIs via OPALBenjamin Herrenschmidt1-0/+1
2017-01-05xive/phb4: Work around broken LSI control on P9 DD1Benjamin Herrenschmidt1-0/+1
2017-01-05xive: Export opal_xive_reset() arguments in OPAL APIBenjamin Herrenschmidt1-0/+9
2017-01-05xive/phb4: Handle bad ESB offsets in PHB4 DD1Benjamin Herrenschmidt1-0/+1
2017-01-05xive: OPAL API updateBenjamin Herrenschmidt1-1/+35
2016-12-23platform: add OPAL_REBOOT_FULL_IPL reboot typeAndrew Donnellan1-0/+1
2016-12-13slw: Set PSSCR value for idle statesShilpasri G Bhat1-0/+15
2016-09-26occ/prd/opal-prd: Queue OCC_RESET event message to host in OpenPOWERShilpasri G Bhat1-0/+1
2016-09-13centaur: Mark centaur offline after 10 consecutive access errorsBenjamin Herrenschmidt1-0/+1
2016-09-13xscom: Map all HMER status codes to OPAL errorsBenjamin Herrenschmidt1-0/+7
2016-09-06core/cpu.c: Add OPAL call to setup Nest MMUAlistair Popple1-1/+2
2016-08-12Add infrastructure for pointer validation.Balbir Singh1-0/+3
2016-07-08hw/phb4: Add initial supportBenjamin Herrenschmidt1-2/+16
2016-07-08XIVE: Base XIVE support for OPAL XICS emulation callsBenjamin Herrenschmidt1-4/+4
2016-07-06Reserve OPAL API numbers for XICS emulation for XIVEStewart Smith1-1/+5
2016-06-20slw: Move macros associated with power-mgt nodes to opal-api.hShreyas B. Prabhu1-2/+19
generated by cgit v1.1 at 2024-09-09 00:27:12 +0000