| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Lowest Point of Coherency (LPC) memory allows the host to access memory on
an OpenCAPI device.
When the P10 chip accesses memory addresses on the AFU, the Real Address
on the PowerBus must hit a BAR in the PAU such as GPU-Memory BAR. The BAR
defines the range of Real Addresses that represent AFU memory.
The two existing OPAL calls, OPAL_NPU_MEM_ALLOC and OPAL_NPU_MEM_RELEASE
are used to manage the AFU momory.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
|
|
The remaining translation mode: OpenCAPI 5.0 with TLBI/SLBI Snooping, is
not used due to performance problems caused by the mismatch between the
ERAT and Bloom Filter sizes.
When the Address Translation Mode requires TLB and SLB Invalidate
operations to be initiated using MMIO registers, a set of registers like
the following is used:
• XTS MMIO ATSD0 LPARID register
• XTS MMIO ATSD0 AVA register
• XTS MMIO ATSD0 launch register, write access initiates a shoot down
• XTS MMIO ATSD0 status register
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
|
|
Update the content of three current OPAL API calls to support PAU.
- OPAL_NPU_SPA_SETUP
The Shared Process Area (SPA) is a table containing one entry (a
"Process Element") per memory context which can be accessed by the
OpenCAPI device.
- OPAL_NPU_SPA_CLEAR_CACHE
The PAU keeps a cache of recently accessed memory contexts. When a
Process Element is removed from the SPA, the cache for the link must
be cleared.
- OPAL_NPU_TL_SET
The Transaction Layer specification defines several templates for
messages to be exchanged on the link. During link setup, the host
and device must negotiate what templates are supported on both sides
and at what rates those messages can be sent.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
|
|
Move the OPAL entry points for npu2 opencapi to the common opal NPU
file. This prepares us to add same entries for PAU opencapi in this common
file.
No functional change.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
|
|
npu3 was only used on the Swift platform to add support for
GPUs (nvlink). The Swift platform has never left the lab and support
for GPUs on it is pretty much dead. So let's remove it.
The patch removes all related code. Device tree entries are no
longer created and in the very unlikely case that someone is still
trying to boot it, the linux nvlink discovery code should be quiet.
Tested by booting on Swift with no GPU.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
|
|
SPDX makes it a simpler diff.
I have audited the commit history of each file to ensure that they are
exclusively authored by IBM and thus we have the right to relicense.
The motivation behind this is twofold:
1) We want to enable experiments with coreboot, which is GPLv2 licensed
2) An upcoming firmware component wants to incorporate code from skiboot
and code from the Linux kernel, which is GPLv2 licensed.
I have gone through the IBM internal way of gaining approval for this.
The following files are not exclusively authored by IBM, so are *not*
included in this update (I will be seeking approval from contributors):
core/direct-controls.c
core/flash.c
core/pcie-slot.c
external/common/arch_flash_unknown.c
external/common/rules.mk
external/gard/Makefile
external/gard/rules.mk
external/opal-prd/Makefile
external/pflash/Makefile
external/xscom-utils/Makefile
hdata/vpd.c
hw/dts.c
hw/ipmi/ipmi-watchdog.c
hw/phb4.c
include/cpu.h
include/phb4.h
include/platform.h
libflash/libffs.c
libstb/mbedtls/sha512.c
libstb/mbedtls/sha512.h
platforms/astbmc/barreleye.c
platforms/astbmc/garrison.c
platforms/astbmc/mihawk.c
platforms/astbmc/nicole.c
platforms/astbmc/p8dnu.c
platforms/astbmc/p8dtu.c
platforms/astbmc/p9dsu.c
platforms/astbmc/vesnin.c
platforms/rhesus/ec/config.h
platforms/rhesus/ec/gpio.h
platforms/rhesus/gpio.c
platforms/rhesus/rhesus.c
platforms/astbmc/talos.c
platforms/astbmc/romulus.c
Signed-off-by: Stewart Smith <stewart@linux.ibm.com>
[oliver: fixed up the drift]
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
|
|
Convert the npu3 files to use SPDX headers.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
|
|
POWER9P systems have been upgraded with NVLink 3.0 interconnects. The
underlying hardware is fundamentally different--each POWER9 chip has
(1 NPU) * (3 stacks) * (2 bricks) = (6 links)
Where in each POWER9P chip, there are
(3 NPUs) * (4 bricks) = (12 links)
This flatter hierarchy simplifies the firmware implementation a bit, but
also prevents sharing much common code with npu2.
As in previous versions, initialize the hardware and expose each link to
the OS as a virtual PCIe device. This initial support covers NVLink
devices only, with OpenCAPI to follow.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Reviewed-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
|
|
Abstract the OPAL entry points for npu2, moving them to a new file. This
prepares us to add parallel npu3 versions of the same APIs.
No functional change.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
|
