diff options
author | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2014-07-02 15:36:20 +1000 |
---|---|---|
committer | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2014-07-02 15:36:20 +1000 |
commit | 1d880992fd8c8457a2d990ac6622cfd58fb1b261 (patch) | |
tree | c4c843b12e96b5612c315db5a23c5da1a900618c /include/p7ioc.h | |
download | skiboot-1d880992fd8c8457a2d990ac6622cfd58fb1b261.zip skiboot-1d880992fd8c8457a2d990ac6622cfd58fb1b261.tar.gz skiboot-1d880992fd8c8457a2d990ac6622cfd58fb1b261.tar.bz2 |
Initial commit of Open Source release
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Diffstat (limited to 'include/p7ioc.h')
-rw-r--r-- | include/p7ioc.h | 431 |
1 files changed, 431 insertions, 0 deletions
diff --git a/include/p7ioc.h b/include/p7ioc.h new file mode 100644 index 0000000..70c174e --- /dev/null +++ b/include/p7ioc.h @@ -0,0 +1,431 @@ +/* Copyright 2013-2014 IBM Corp. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + * implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __P7IOC_H +#define __P7IOC_H + +#include <cec.h> +#include <pci.h> +#include <lock.h> + +#include <ccan/container_of/container_of.h> + +/* + * Memory windows and BUID assignment + * + * - GX BAR assignment + * + * I don't know of any spec here, so we're going to mimmic what + * OPAL seems to be doing: + * + * - BAR 0 : 32M, disabled. We just leave it alone. + * - BAR 1 : 8G, enabled. Appears to correspond to the MMIO + * space of the IOC itself and the PCI IO space + * - BAR 2: 128G, + * - BAR 3: 128G, + * - BAR 4: 128G, all 3 contiguous, forming a single 368G region + * and is used for M32 and M64 PHB windows. + * + * - Memory map + * + * MWIN1 = BAR1 (8G) + * MWIN2 = BAR2,3,4 (384G) + * + * MWIN2 is divided into 6 * 4G regions for use by M32's (*) and + * 6 * 32G regions for use by M64's. + * + * (*) The M32 will typically be configured to only 2G or so, however + * the OS is in control of that setting, and since we have to reserve + * a power of two, we reserve the whole 4G. + * + * - RGC registers: MWIN1 + 0x00000000 + * - PHBn IO space: MWIN1 + 0x01000000 + n * 0x00800000 (8M each) + * - PHBn M32 : MWIN2 + n * 0x1_00000000 (4G each) + * - PHBn M64 : MWIN2 + (n + 1) * 0x8_00000000 (32G each) + * + * - BUID map. The RGC has interrupts, each PHB has then its own + * interrupts (errors etc...), 4 LSIs and 256 LSIs so + * respectively 1 BUID for self, 1 for LSIs and 16 for LSIs + * + * We keep all BUIDs below 0x10 reserved. They will be used for things + * like the PSI controller, the NX unit, etc.. in the P7 chip. + * + * RGC : 0x010 + * PHBn LSI : 0x040 + n * 0x40 ( 1 BUID) + * PHBn MSI : 0x060 + n * 0x40 (0x10 BUIDs) + * + * -> For routing, each PHB gets a block of 0x40 BUIDs: + * + * from 0x40 * (n + 1) to 0x7f * (n + 1) + */ + +/* Some definitions resulting from the above description + * + * Note: A better approach might be to read the GX BAR content + * and isolate the biggest contiguous windows. From there + * we could divide things algorithmically and thus be + * less sensitive to a change in the memory map by the FSP + */ +#define MWIN1_SIZE 0x200000000ul /* MWIN1 is 8G */ +#define MWIN2_SIZE 0x6000000000ul /* MWIN2 is 384G */ +#define PHB_IO_OFFSET 0x01000000ul /* Offset of PHB IO space in MWIN1 */ +#define PHB_IO_SIZE 0x00800000ul +#define PHB_M32_OFFSET 0x0ul /* Offset of PHB M32 space in MWIN2 */ +#define PHB_M32_SIZE 0x100000000ul +#define PHB_M64_OFFSET 0x800000000ul /* Offset of PHB M64 space in MWIN2 */ +#define PHB_M64_SIZE 0x800000000ul +#define RGC_BUID_OFFSET 0x10 /* Offset of RGC BUID */ +#define PHB_BUID_OFFSET 0x40 /* Offset of PHB BUID blocks */ +#define PHB_BUID_SIZE 0x40 /* Size of PHB BUID blocks */ +#define PHB_BUID_LSI_OFFSET 0x00 /* Offset of LSI in PHB BUID block */ +#define PHB_BUID_MSI_OFFSET 0x20 /* Offset of MSI in PHB BUID block */ +#define PHB_BUID_MSI_SIZE 0x10 /* Size of PHB MSI BUID block */ + +#define PHBn_IO_BASE(n) (PHB_IO_OFFSET + (n) * PHB_IO_SIZE) +#define PHBn_M32_BASE(n) (PHB_M32_OFFSET + (n) * PHB_M32_SIZE) +#define PHBn_M64_BASE(n) (PHB_M64_OFFSET + (n) * PHB_M64_SIZE) +#define PHBn_BUID_BASE(n) (PHB_BUID_OFFSET + (n) * PHB_BUID_SIZE) + +#define BUID_TO_PHB(buid) (((buid) - PHB_BUID_OFFSET) / PHB_BUID_SIZE) + +/* p7ioc has 6 PHBs */ +#define P7IOC_NUM_PHBS 6 + +/* M32 window setting at boot: + * + * To allow for DMA, we need to split the 32-bit PCI address space between + * MMIO and DMA. For now, we use a 2G/2G split with MMIO at the top. + * + * Note: The top 64K of the M32 space are used by MSIs. This is not + * visible here but need to be conveyed to the OS one way or another + * + * Note2: The space reserved in the system address space for M32 is always + * 4G. That we chose to use a smaller portion of it is not relevant to + * the upper levels. To keep things consistent, the offset we apply to + * the window start is also applied on the host side. + */ +#define M32_PCI_START 0x80000000 +#define M32_PCI_SIZE 0x80000000 + +/* PHB registers exist in both a hard coded space and a programmable + * AIB space. We program the latter to the values recommended in the + * documentation: + * + * 0x80000 + n * 0x10000 + */ +#define PHBn_ASB_BASE(n) (((n) << 16)) +#define PHBn_ASB_SIZE 0x10000ul +#define PHBn_AIB_BASE(n) (0x80000ul + ((n) << 16)) +#define PHBn_AIB_SIZE 0x10000ul + +/* + * LSI interrupts + * + * The LSI interrupt block supports 8 interrupts. 4 of them are the + * standard PCIe INTA..INTB. The rest is for additional functions + * of the PHB + */ +#define PHB_LSI_PCIE_INTA 0 +#define PHB_LSI_PCIE_INTB 1 +#define PHB_LSI_PCIE_INTC 2 +#define PHB_LSI_PCIE_INTD 3 +#define PHB_LSI_PCIE_HOTPLUG 4 +#define PHB_LSI_PCIE_PERFCTR 5 +#define PHB_LSI_PCIE_UNUSED 6 +#define PHB_LSI_PCIE_ERROR 7 + +/* + * State structure for a PHB on P7IOC + */ + +/* + * The PHB State structure is essentially used during PHB reset + * or recovery operations to indicate that the PHB cannot currently + * be used for normal operations. + * + * Some states involve waiting for the timebase to reach a certain + * value. In which case the field "delay_tgt_tb" is set and the + * state machine will be run from the "state_poll" callback. + * + * At IPL time, we call this repeatedly during the various sequences + * however under OS control, this will require a change in API. + * + * Fortunately, the OPAL API for slot power & reset are not currently + * used by Linux, so changing them isn't going to be an issue. The idea + * here is that some of these APIs will return a positive integer when + * needing such a delay to proceed. The OS will then be required to + * call a new function opal_poll_phb() after that delay. That function + * will potentially return a new delay, or OPAL_SUCCESS when the original + * operation has completed successfully. If the operation has completed + * with an error, then opal_poll_phb() will return that error. + * + * Note: Should we consider also returning optionally some indication + * of what operation is in progress for OS debug/diag purposes ? + * + * Any attempt at starting a new "asynchronous" operation while one is + * already in progress will result in an error. + * + * Internally, this is represented by the state being P7IOC_PHB_STATE_FUNCTIONAL + * when no operation is in progress, which it reaches at the end of the + * boot time initializations. Any attempt at performing a slot operation + * on a PHB in that state will change the state to the corresponding + * operation state machine. Any attempt while not in that state will + * return an error. + * + * Some operations allow for a certain amount of retries, this is + * provided for by the "retries" structure member for use by the state + * machine as it sees fit. + */ +enum p7ioc_phb_state { + /* First init state */ + P7IOC_PHB_STATE_UNINITIALIZED, + + /* During PHB HW inits */ + P7IOC_PHB_STATE_INITIALIZING, + + /* Set if the PHB is for some reason unusable */ + P7IOC_PHB_STATE_BROKEN, + + /* Set if the PHB is fenced due to an error */ + P7IOC_PHB_STATE_FENCED, + + /* PHB turned off by FSP (no clocks) */ + P7IOC_PHB_STATE_OFF, + + /* Slot Power up state machine */ + P7IOC_PHB_STATE_SPUP_STABILIZE_DELAY, /* Step 3 Delay 2s */ + P7IOC_PHB_STATE_SPUP_SLOT_STATUS, /* Step 4 waiting for status */ + + /* Slot Power down state machine */ + P7IOC_PHB_STATE_SPDOWN_STABILIZE_DELAY, /* Step 2 Delay 2s */ + P7IOC_PHB_STATE_SPDOWN_SLOT_STATUS, /* Step 3 waiting for status */ + + /* Fundamental reset sequence */ + P7IOC_PHB_STATE_FRESET_DISABLE_LINK, /* Disable link training */ + P7IOC_PHB_STATE_FRESET_ASSERT_DELAY, /* Delay on fundamental reset assert */ + P7IOC_PHB_STATE_FRESET_DEASSERT_DELAY, /* Delay on fundamental reset deassert */ + P7IOC_PHB_STATE_FRESET_WAIT_LINK, /* Wait for link up */ + + /* Hot Reset sequence */ + P7IOC_PHB_STATE_HRESET_DISABLE_LINK, /* Disable Link training */ + P7IOC_PHB_STATE_HRESET_ASSERT, /* Hot reset assert */ + P7IOC_PHB_STATE_HRESET_DELAY, /* Hot reset delay */ + P7IOC_PHB_STATE_HRESET_ENABLE_LINK, /* Enable Link training */ + P7IOC_PHB_STATE_HRESET_WAIT_LINK, /* Wait link traing */ + + /* Normal PHB functional state */ + P7IOC_PHB_STATE_FUNCTIONAL, +}; + +/* + * In order to support error detection and recovery on different + * types of IOCs (e.g. P5IOC, P7IOC, P8IOC), the best bet would + * be make the implementation to be 2 layers: OPAL layer and IOC + * layer. The OPAL layer just handles the general information and + * IOC layer should process much more detailed information, which + * is sensitive to itself. + */ +#define P7IOC_ERR_SRC_NONE 0 +#define P7IOC_ERR_SRC_EI 1 +#define P7IOC_ERR_SRC_RGC 2 +#define P7IOC_ERR_SRC_BI_UP 3 +#define P7IOC_ERR_SRC_BI_DOWN 4 +#define P7IOC_ERR_SRC_CI_P0 5 +#define P7IOC_ERR_SRC_CI_P1 6 +#define P7IOC_ERR_SRC_CI_P2 7 +#define P7IOC_ERR_SRC_CI_P3 8 +#define P7IOC_ERR_SRC_CI_P4 9 +#define P7IOC_ERR_SRC_CI_P5 10 +#define P7IOC_ERR_SRC_CI_P6 11 +#define P7IOC_ERR_SRC_CI_P7 12 +#define P7IOC_ERR_SRC_PHB0 13 +#define P7IOC_ERR_SRC_PHB1 14 +#define P7IOC_ERR_SRC_PHB2 15 +#define P7IOC_ERR_SRC_PHB3 16 +#define P7IOC_ERR_SRC_PHB4 17 +#define P7IOC_ERR_SRC_PHB5 18 +#define P7IOC_ERR_SRC_MISC 19 +#define P7IOC_ERR_SRC_I2C 20 +#define P7IOC_ERR_SRC_LAST 21 + +#define P7IOC_ERR_CLASS_NONE 0 +#define P7IOC_ERR_CLASS_GXE 1 +#define P7IOC_ERR_CLASS_PLL 2 +#define P7IOC_ERR_CLASS_RGA 3 +#define P7IOC_ERR_CLASS_PHB 4 +#define P7IOC_ERR_CLASS_ER 5 +#define P7IOC_ERR_CLASS_INF 6 +#define P7IOC_ERR_CLASS_MAL 7 +#define P7IOC_ERR_CLASS_LAST 8 + +/* + * P7IOC error descriptor. For errors from PHB and PE, they + * will be cached to the corresponding PHBs. However, the + * left errors (e.g. EI, CI Port0/1) will be cached to the + * IOC directly. + */ +struct p7ioc_err { + uint32_t err_src; + uint32_t err_class; + uint32_t err_bit; +}; + +struct p7ioc; + +#define P7IOC_PHB_CFG_USE_ASB 1 /* ASB to access PCI-CFG */ +#define P7IOC_PHB_CFG_BLOCKED 2 /* PCI-CFG blocked except 0 */ + +struct p7ioc_phb { + uint8_t index; /* 0..5 index inside p7ioc */ + uint8_t gen; + uint32_t flags; + void *regs_asb; + void *regs; /* AIB regs */ + struct lock lock; + uint32_t buid_lsi; + uint32_t buid_msi; + uint64_t io_base; + uint64_t m32_base; + uint64_t m64_base; + enum p7ioc_phb_state state; + uint64_t delay_tgt_tb; + uint64_t retries; + int64_t ecap; /* cached PCI-E cap offset */ + int64_t aercap; /* cached AER ecap offset */ + uint64_t lxive_cache[8]; + uint64_t mxive_cache[256]; + uint64_t mve_cache[256]; + uint64_t peltm_cache[128]; + uint64_t peltv_lo_cache[128]; + uint64_t peltv_hi_cache[128]; + uint64_t tve_lo_cache[128]; + uint64_t tve_hi_cache[128]; + uint64_t iod_cache[128]; + uint64_t m32d_cache[128]; + uint64_t m64b_cache[16]; + uint64_t m64d_cache[128]; + bool err_pending; + struct p7ioc_err err; + struct p7ioc *ioc; + struct phb phb; +}; + +static inline struct p7ioc_phb *phb_to_p7ioc_phb(struct phb *phb) +{ + return container_of(phb, struct p7ioc_phb, phb); +} + +static inline bool p7ioc_phb_err_pending(struct p7ioc_phb *p) +{ + return p->err_pending; +} + +static inline void p7ioc_phb_set_err_pending(struct p7ioc_phb *p, bool pending) +{ + if (!pending) { + p->err.err_src = P7IOC_ERR_SRC_NONE; + p->err.err_class = P7IOC_ERR_CLASS_NONE; + p->err.err_bit = -1; + } + + p->err_pending = pending; +} + +/* + * State structure for P7IOC IO HUB + */ +struct p7ioc { + /* Device node */ + struct dt_node *dt_node; + + /* MMIO regs */ + void *regs; + + /* Main MMIO window from GX for registers & PCI IO space */ + uint64_t mmio1_win_start; + uint64_t mmio1_win_size; + + /* Secondary MMIO window for PCI MMIO space */ + uint64_t mmio2_win_start; + uint64_t mmio2_win_size; + + /* BUID base for the PHB. This does include the top bits + * (chip, GX bus ID, etc...). This is initialized from the + * SPIRA. It does not contain the offset 0x10 for RGC + * interrupts. + * + * The OPAL-defined "interrupt-base" property will contain + * the RGC BUID, not this base value, since this is the real + * starting point of interrupts for the IOC and we don't want + * to cover the BUID 0..f gap which is reserved for P7 on-chip + * interrupt sources. + */ + uint32_t buid_base; + uint32_t rgc_buid; + + /* XIVT cache for RGC interrupts */ + uint64_t xive_cache[16]; + bool err_pending; + struct p7ioc_err err; + + /* PHB array & presence detect */ + struct p7ioc_phb phbs[P7IOC_NUM_PHBS]; + uint8_t phb_pdt; + + struct io_hub hub; +}; + +static inline struct p7ioc *iohub_to_p7ioc(struct io_hub *hub) +{ + return container_of(hub, struct p7ioc, hub); +} + +static inline bool p7ioc_err_pending(struct p7ioc *ioc) +{ + return ioc->err_pending; +} + +static inline void p7ioc_set_err_pending(struct p7ioc *ioc, bool pending) +{ + if (!pending) { + ioc->err.err_src = P7IOC_ERR_SRC_NONE; + ioc->err.err_class = P7IOC_ERR_CLASS_NONE; + ioc->err.err_bit = -1; + } + + ioc->err_pending = pending; +} + +static inline bool p7ioc_phb_enabled(struct p7ioc *ioc, unsigned int phb) +{ + return !!(ioc->phb_pdt & (0x80 >> phb)); +} + +extern int64_t p7ioc_inits(struct p7ioc *ioc); + +extern void p7ioc_phb_setup(struct p7ioc *ioc, uint8_t index); +extern int64_t p7ioc_phb_init(struct p7ioc_phb *p); + +extern bool p7ioc_check_LEM(struct p7ioc *ioc, uint16_t *pci_error_type, + uint16_t *severity); +extern int64_t p7ioc_phb_get_xive(struct p7ioc_phb *p, uint32_t isn, + uint16_t *server, uint8_t *prio); +extern int64_t p7ioc_phb_set_xive(struct p7ioc_phb *p, uint32_t isn, + uint16_t server, uint8_t prio); +extern void p7ioc_reset(struct io_hub *hub); +extern void p7ioc_phb_reset(struct phb *phb); + +#endif /* __P7IOC_H */ |