diff options
author | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2014-07-02 15:36:20 +1000 |
---|---|---|
committer | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2014-07-02 15:36:20 +1000 |
commit | 1d880992fd8c8457a2d990ac6622cfd58fb1b261 (patch) | |
tree | c4c843b12e96b5612c315db5a23c5da1a900618c /hw/ec | |
download | skiboot-1d880992fd8c8457a2d990ac6622cfd58fb1b261.zip skiboot-1d880992fd8c8457a2d990ac6622cfd58fb1b261.tar.gz skiboot-1d880992fd8c8457a2d990ac6622cfd58fb1b261.tar.bz2 |
Initial commit of Open Source release
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Diffstat (limited to 'hw/ec')
-rw-r--r-- | hw/ec/Makefile.inc | 8 | ||||
-rw-r--r-- | hw/ec/gpio.c | 87 | ||||
-rw-r--r-- | hw/ec/makefile | 8 |
3 files changed, 103 insertions, 0 deletions
diff --git a/hw/ec/Makefile.inc b/hw/ec/Makefile.inc new file mode 100644 index 0000000..09c9c84 --- /dev/null +++ b/hw/ec/Makefile.inc @@ -0,0 +1,8 @@ +# -*-Makefile-*- +# Sapphire EC makefile + +SUBDIRS += hw/ec +EC_OBJS = gpio.o +EC=hw/ec/built-in.o + +$(EC): $(EC_OBJS:%=hw/ec/%) diff --git a/hw/ec/gpio.c b/hw/ec/gpio.c new file mode 100644 index 0000000..0a2223d --- /dev/null +++ b/hw/ec/gpio.c @@ -0,0 +1,87 @@ +/* Copyright 2013-2014 Google Corp. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + * implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include <stdint.h> +#include "ec/config.h" +#include "ec/gpio.h" + +int ec_gpio_setup(EcGpioPort port, uint8_t pin, + int is_output, int pullup_enable) +{ + uint8_t ddr_reg; + if (pin > 7) { + return -1; + } + + /* Set data direction */ + ec_outb(EC_GPIO_INDEX, + port * EC_GPIO_PORT_SKIP + EC_GPIO_DDR_OFFSET); + ddr_reg = ec_inb(EC_GPIO_DATA); + if (is_output) { + ddr_reg |= (1 << pin); + } else { + ddr_reg &= ~(1 << pin); + } + ec_outb(EC_GPIO_DATA, ddr_reg); + + /* Set pullup enable for output GPOs */ + if (is_output) + { + uint8_t pup_reg; + ec_outb(EC_GPIO_INDEX, + port * EC_GPIO_PORT_SKIP + EC_GPIO_PUP_OFFSET); + pup_reg = ec_inb(EC_GPIO_DATA); + if (pullup_enable) { + pup_reg |= (1 << pin); + } else { + pup_reg &= ~(1 << pin); + } + ec_outb(EC_GPIO_DATA, pup_reg); + } + + return 0; +} + +int ec_gpio_read(EcGpioPort port, uint8_t pin) +{ + uint8_t pin_reg; + if (pin > 7) { + return -1; + } + + ec_outb(EC_GPIO_INDEX, + port * EC_GPIO_PORT_SKIP + EC_GPIO_PIN_OFFSET); + pin_reg = ec_inb(EC_GPIO_DATA); + return !!(pin_reg & (1 << pin)); +} + +int ec_gpio_set(EcGpioPort port, uint8_t pin, int val) +{ + uint8_t data_reg; + if (pin > 7) { + return -1; + } + + ec_outb(EC_GPIO_INDEX, + port * EC_GPIO_PORT_SKIP + EC_GPIO_DATA_OFFSET); + data_reg = ec_inb(EC_GPIO_DATA); + if (val) { + data_reg |= (1 << pin); + } else { + data_reg &= ~(1 << pin); + } + ec_outb(EC_GPIO_DATA, data_reg); + return 0; +} diff --git a/hw/ec/makefile b/hw/ec/makefile new file mode 100644 index 0000000..e6ceafa --- /dev/null +++ b/hw/ec/makefile @@ -0,0 +1,8 @@ +ROOTPATH = ../../.. +MODULE = ec + +OBJS = cmosdd.o gpio.o rhesus.o hostboot.o + +SUBDIRS = test.d + +include ${ROOTPATH}/config.mk |