aboutsummaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorStewart Smith <stewart@linux.ibm.com>2018-11-02 18:50:05 +1100
committerStewart Smith <stewart@linux.ibm.com>2018-11-02 18:52:41 +1100
commit52725306f49566e6ab3da68482c8e22a8ab56412 (patch)
treef404d2005296f456806d0668e52f88142fba3393 /doc
parent594cfacf0e41b549cf22c97ff452d7682611847c (diff)
downloadskiboot-52725306f49566e6ab3da68482c8e22a8ab56412.zip
skiboot-52725306f49566e6ab3da68482c8e22a8ab56412.tar.gz
skiboot-52725306f49566e6ab3da68482c8e22a8ab56412.tar.bz2
skiboot 6.0.11 release notes
Signed-off-by: Stewart Smith <stewart@linux.ibm.com> (cherry picked from commit 3e2024d903ee27ad77da01f454bb2404627ba5dc) Signed-off-by: Stewart Smith <stewart@linux.ibm.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/release-notes/skiboot-6.0.11.rst57
1 files changed, 57 insertions, 0 deletions
diff --git a/doc/release-notes/skiboot-6.0.11.rst b/doc/release-notes/skiboot-6.0.11.rst
new file mode 100644
index 0000000..a09f381
--- /dev/null
+++ b/doc/release-notes/skiboot-6.0.11.rst
@@ -0,0 +1,57 @@
+.. _skiboot-6.0.11:
+
+==============
+skiboot-6.0.11
+==============
+
+skiboot 6.0.11 was released on Friday November 2nd, 2018. It replaces
+:ref:`skiboot-6.0.10` as the current stable release in the 6.0.x series.
+
+It is recommended that 6.0.11 be used instead of any previous 6.0.x version
+due to the bug fixes it contains.
+
+The bug fixes are:
+
+- phb4/capp: Only reset FIR bits that cause capp machine check
+
+ During CAPP recovery do_capp_recovery_scoms() will reset the CAPP Fir
+ register just after CAPP recovery is completed. This has an
+ unintentional side effect of preventing PRD from analyzing and
+ reporting this error. If PRD tries to read the CAPP FIR after opal has
+ already reset it, then it logs a critical error complaining "No active
+ error bits found".
+
+ To prevent this from happening we update do_capp_recovery_scoms() to
+ only reset fir bits that cause CAPP machine check (local xstop). This
+ is done by reading the CAPP Fir Action0/1 & Mask registers and
+ generating a mask which is then written on CAPP_FIR_CLEAR register.
+- phb4: Check for RX errors after link training
+
+ Some PHB4 PHYs can get stuck in a bad state where they are constantly
+ retraining the link. This happens transparently to skiboot and Linux
+ but will causes PCIe to be slow. Resetting the PHB4 clears the
+ problem.
+
+ We can detect this case by looking at the RX errors count where we
+ check for link stability. This patch does this by modifying the link
+ optimal code to check for RX errors. If errors are occurring we
+ retrain the link irrespective of the chip rev or card.
+
+ Normally when this problem occurs, the RX error count is maxed out at
+ 255. When there is no problem, the count is 0. We chose 8 as the max
+ rx errors value to give us some margin for a few errors. There is also
+ a knob that can be used to set the error threshold for when we should
+ retrain the link. i.e. ::
+
+ nvram -p ibm,skiboot --update-config phb-rx-err-max=8
+
+- core/flash: Log return code when ffs_init() fails
+- libflash/ipmi-hiomap: Use error codes rather than abort()
+- libflash/ipmi-hiomap: Restore window state on window/protocol reset
+- libflash/ipmi-hiomap: Improve event handling
+- p9dsu: Describe platform BMC register configuration
+
+ Provide the p9dsu-specific BMC configuration values required for the
+ host kernel to drive the VGA display correctly.
+- p9dsu: Add HIOMAP-over-IPMI support
+- libflash/ipmi-hiomap: Cleanup allocation on init failure