core/pci: Use PCI slot in enumeration

During PCI enumeration, the root complex's link and fundamental
reset are carried out by PHB's callbacks which are replaced by
the corresponding PCI slot's callbacks. Also, the hotplug related
device node properties are populated based on the PCI slot info
that is included in PCI slot now.

This uses PCI slot in enumeration:

   * Use PCI slot's callbacks for fundamental reset and link status
     retrieval in PCI enumeration.
   * Simplify the code by removing traditional PCI/PCI-x related
     logic as we don't have PCI/PCI-X root complex.
   * Replace pci_add_slot_properties() with pci_slot_add_properties()
     to populate PCI slot properties in device-tree.
   * PHB is always not hotpluggable. No hotpluggable properties in
     its device node are needed.
   * Remove "struct pci_slot_info" definition as its info is included
     in "struct pci_slot".

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>

1 files changed, 38 insertions, 141 deletions

diff --git a/core/pci.c b/core/pci.c
index 9f5c1f3..bf07ff9 100644
--- a/core/pci.c
+++ b/core/pci.c
@@ -721,110 +721,57 @@ void pci_device_init(struct phb *phb, struct pci_device *pd)
 	pci_disable_completion_timeout(phb, pd);
 }
 
-/*
- * The power state would be checked. If the power has
- * been on, we will issue fundamental reset. Otherwise,
- * we will power it on before issuing fundamental reset.
- */
-static int64_t pci_phb_reset(struct phb *phb)
+static void pci_reset_phb(void *data)
 {
-	const char *desc;
+	struct phb *phb = data;
+	struct pci_slot *slot = phb->slot;
 	int64_t rc;
 
-	rc = phb->ops->power_state(phb);
-	if (rc < 0) {
-		PCIERR(phb, 0, "Failed to get power state, rc=%lld\n", rc);
-		return rc;
-	}
-
-	if (rc == OPAL_SHPC_POWER_ON) {
-		desc = "fundamental reset";
-		rc = phb->ops->fundamental_reset(phb);
-	} else {
-		desc = "power on";
-		rc = phb->ops->slot_power_on(phb);
-	}
-
-	if (rc < 0) {
-		/* Don't warn if it's just an empty slot */
-		if (rc != OPAL_CLOSED)
-			goto warn_err;
-		return rc;
+	if (!slot || !slot->ops.freset) {
+		PCINOTICE(phb, 0, "Cannot issue fundamental reset\n");
+		return;
 	}
 
-	/* Wait the internal state machine */
+	pci_slot_add_flags(slot, PCI_SLOT_FLAG_BOOTUP);
+	rc = slot->ops.freset(slot);
 	while (rc > 0) {
 		time_wait(rc);
-		rc = phb->ops->poll(phb);
+		rc = slot->ops.poll(slot);
 	}
-
- warn_err:
+	pci_slot_remove_flags(slot, PCI_SLOT_FLAG_BOOTUP);
 	if (rc < 0)
-		PCIERR(phb, 0, "Failed to %s, rc=%lld\n", desc, rc);
-
-        return rc;
-}
-
-static void pci_reset_phb(void *data)
-{
-	struct phb *phb = data;
-	int64_t rc;
-
-	PCIDBG(phb, 0, "Init slot...\n");
-
-	/*
-	 * For PCI/PCI-X, we get the slot info and we also
-	 * check if the PHB has anything connected to it
-	 */
-	if (phb->phb_type < phb_type_pcie_v1) {
-		if (platform.pci_get_slot_info)
-			platform.pci_get_slot_info(phb, NULL);
-		rc = phb->ops->presence_detect(phb);
-		if (rc != OPAL_SHPC_DEV_PRESENT) {
-			PCIDBG(phb, 0, "Slot empty\n");
-			return;
-		}
-	}
-
-	/*
-	 * Power on the PHB, the PHB should be reset in
-	 * fundamental way while powering on. The reset
-	 * state machine is going to wait for the link
-	 */
-	pci_phb_reset(phb);
+		PCIERR(phb, 0, "Error %lld fundamental resetting\n", rc);
 }
 
 static void pci_scan_phb(void *data)
 {
 	struct phb *phb = data;
+	struct pci_slot *slot = phb->slot;
+	uint8_t link;
 	uint32_t mps = 0xffffffff;
-	bool has_link = false;
 	int64_t rc;
 
-	rc = phb->ops->link_state(phb);
-	if (rc < 0) {
-		PCIERR(phb, 0, "Failed to query link state, rc=%lld\n", rc);
-		return;
+	if (!slot || !slot->ops.get_link_state) {
+		PCIERR(phb, 0, "Cannot query link status\n");
+		link = 0;
+	} else {
+		rc = slot->ops.get_link_state(slot, &link);
+		if (rc != OPAL_SUCCESS) {
+			PCIERR(phb, 0, "Error %lld querying link status\n",
+			       rc);
+			link = 0;
+		}
 	}
 
-	/*
-	 * We will probe the root port. If the PHB has trained
-	 * link, we will probe the downstream port as well.
-	 */
-	if (rc != OPAL_SHPC_LINK_DOWN)
-		has_link = true;
-
-	if (has_link && phb->phb_type >= phb_type_pcie_v1)
-		PCIDBG(phb, 0, "Link up at x%lld width\n", rc);
-	else if (has_link)
-		PCIDBG(phb, 0, "Link up\n");
-	else
+	if (!link)
 		PCIDBG(phb, 0, "Link down\n");
+	else
+		PCIDBG(phb, 0, "Link up at x%d width\n", link);
 
 	/* Scan root port and downstream ports if applicable */
 	PCIDBG(phb, 0, "Scanning (upstream%s)...\n",
-	       has_link ? "+downsteam" : " only");
-	pci_scan_bus(phb, 0, 0xff, &phb->devices, NULL, has_link);
+	       link ? "+downsteam" : " only");
+	pci_scan_bus(phb, 0, 0xff, &phb->devices, NULL, link);
 
 	/* Configure MPS (Max Payload Size) for PCIe domain */
 	pci_walk_dev(phb, NULL, pci_get_mps, &mps);
@@ -1193,52 +1140,6 @@ void pci_std_swizzle_irq_map(struct dt_node *np,
 	free(map);
 }
 
-static void pci_add_slot_properties(struct phb *phb, struct pci_slot_info *info,
-				    struct dt_node *np)
-{
-	char loc_code[LOC_CODE_SIZE];
-	size_t base_loc_code_len = 0, slot_label_len = 0;
-
-	loc_code[0] = '\0';
-
-	if (phb->base_loc_code) {
-		base_loc_code_len = strlen(phb->base_loc_code);
-		strcpy(loc_code, phb->base_loc_code);
-	}
-	slot_label_len = strlen(info->label);
-	if (slot_label_len) {
-		if ((base_loc_code_len + slot_label_len + 1) < LOC_CODE_SIZE) {
-			if (base_loc_code_len)
-				strcat(loc_code, "-");
-			strcat(loc_code, info->label);
-			dt_add_property(np, "ibm,slot-location-code",
-					loc_code, strlen(loc_code) + 1);
-		} else {
-			PCIERR(phb, 0, "Loc Code too long - %zu + %zu + 1\n",
-			       base_loc_code_len, slot_label_len);
-		}
-	}
-
-	/* Add other slot information */
-	dt_add_property_cells(np, "ibm,slot-pluggable", info->pluggable);
-	dt_add_property_cells(np, "ibm,slot-power-ctl", info->power_ctl);
-	if (info->wired_lanes >= 0)
-		dt_add_property_cells(np, "ibm,slot-wired-lanes", info->wired_lanes);
-	/*dt_add_property(np, "ibm,slot-bus-clock", &pd->slot_info->bus_clock, sizeof(uint8_t));*/
-	if (info->connector_type >= 0)
-		dt_add_property_cells(np, "ibm,slot-connector-type", info->connector_type);
-	if (info->card_desc >= 0)
-		dt_add_property_cells(np, "ibm,slot-card-desc", info->card_desc);
-	if (info->card_mech >= 0)
-		dt_add_property_cells(np, "ibm,slot-card-mech", info->card_mech);
-	if (info->pwr_led_ctl >= 0)
-		dt_add_property_cells(np, "ibm,slot-pwr-led-ctl", info->pwr_led_ctl);
-	if (info->attn_led_ctl >= 0)
-		dt_add_property_cells(np, "ibm,slot-attn-led-ctl", info->attn_led_ctl);
-	if (strlen(info->label) > 0)
-		dt_add_property_string(np, "ibm,slot-label", info->label);
-}
-
 static void pci_add_loc_code(struct dt_node *np, struct pci_device *pd)
 {
 	struct dt_node *p = np->parent;
@@ -1249,14 +1150,13 @@ static void pci_add_loc_code(struct dt_node *np, struct pci_device *pd)
 	uint8_t pos, len;
 
 	/* If there is a label assigned to the function, use it on openpower machines */
-	if (pd->slot_info && strlen(pd->slot_info->label) && !fsp_present()) {
-		blcode = pd->slot_info->label;
-	} else {
-		/* Look for a parent with a slot-location-code */
-		while (p && !blcode) {
-			blcode = dt_prop_get_def(p, "ibm,slot-location-code", NULL);
-			p = p->parent;
-		}
+	if (pd->slot)
+		blcode = dt_prop_get_def(np, "ibm,slot-label", NULL);
+
+	/* Look for a parent with a slot-location-code */
+	while (!blcode && p) {
+		blcode = dt_prop_get_def(p, "ibm,slot-location-code", NULL);
+		p = p->parent;
 	}
 	if (!blcode)
 		return;
@@ -1422,8 +1322,8 @@ static void pci_add_one_device_node(struct phb *phb,
 	 */
 
 	/* Add slot properties if needed and iff this is a bridge */
-	if (pd->slot_info && pd->is_bridge)
-		pci_add_slot_properties(phb, pd->slot_info, np);
+	if (pd->slot)
+		pci_slot_add_dt_properties(pd->slot, np);
 
 	/* Make up location code */
 	pci_add_loc_code(np, pd);
@@ -1480,10 +1380,6 @@ void pci_add_device_nodes(struct phb *phb,
 {
 	struct pci_device *pd;
 
-	/* If the PHB has its own slot info, add them */
-	if (phb->slot_info)
-		pci_add_slot_properties(phb, phb->slot_info, NULL);
-
 	/* Add all child devices */
 	list_for_each(list, pd, link) {
 		pci_add_one_device_node(phb, pd, parent_node,
@@ -1574,6 +1470,7 @@ void pci_init_slots(void)
 	for (i = 0; i < ARRAY_SIZE(phbs); i++) {
 		if (!phbs[i])
 			continue;
+
 		pci_add_device_nodes(phbs[i], &phbs[i]->devices,
 				     phbs[i]->dt_node, &phbs[i]->lstate, 0);
 	}