psi: On p9, create an interrupt-map for routing PSI interrupts

This will provide the global IRQ numbers for all 16 PSI inputs (though
we don't really care about 0 here). We can then express them in the
device-tree as relative to the PSI bridge. Among others, that allows
us to express the external interrupt and the LPC interrupt using a
fixed numbering scheme.

The example device-tree is updated to route them all to the LPC0
input which corresponds to what the LPC code does at the moment.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>

2 files changed, 42 insertions, 1 deletions

diff --git a/doc/device-tree/examples/power9-phb4.dts b/doc/device-tree/examples/power9-phb4.dts
index 8da1cbc..a845a86 100644
--- a/doc/device-tree/examples/power9-phb4.dts
+++ b/doc/device-tree/examples/power9-phb4.dts
@@ -153,9 +153,18 @@
 			compatible = "ibm,power9-xive-x";
 		};
 
-		psihb@5012900 {
+		PSI_X0 : psihb@5012900 {
 			reg = <0x5012900 0x100>;
 			compatible = "ibm,power9-psihb-x", "ibm,psihb-x";
+
+		        /* This acts as an interrupt remapper for the 16
+			 * interrupts coming into the PSI HB.
+			 * OPAL will generate the corresponding interrupt-map
+			 * property with the final XIVE numbers
+			 */
+			 #interrupt-cells = <1>;
+			 #address-cells = <0>;
+			 #interrupt-map-mask = < 0xff >;
 		};
 	};
 
@@ -185,6 +194,23 @@
 		    ranges = < 3 0 0xf0000000 0x10000000 /* FW space */
 		               0 0 0xe0000000 0x10000000 /* MEM space */
 		               1 0 0xd0010000 0x00010000 /* IO space */ >;
+
+		    /* We currently only support level interrupts on the LPC,
+		     * we use 1 cell.
+		     */
+	            #interrupt-cells = <1>;
+
+		    /* Route the LPC interrupts to one of the 4 supported
+		     * PSI interrupt inputs [7...10].
+		     */
+		    interrupt-map = < 0 0  4 &PSI_X0 7
+				      0 0 10 &PSI_X0 7>;
+		    interrupt-map-mask = < 0 0 0xff >;
+
+		    /*
+		     * Devices on the LPC bus go here
+		     */
+
 		    serial@i3f8 {
 		        compatible = "ns16550";
 		        reg = < 1 0x3f8 0x10 >;
diff --git a/hw/psi.c b/hw/psi.c
index 465b74e..900886a 100644
--- a/hw/psi.c
+++ b/hw/psi.c
@@ -848,6 +848,20 @@ static void psi_activate_phb(struct psi *psi)
 #endif
 }
 
+static void psi_create_p9_int_map(struct psi *psi, struct dt_node *np)
+{
+	uint32_t map[P9_PSI_NUM_IRQS][4];
+	int i;
+
+	for (i = 0; i < P9_PSI_NUM_IRQS; i++) {
+		map[i][0] = i;
+		map[i][1] = get_ics_phandle();
+		map[i][2] = psi->interrupt + i;
+		map[i][3] = 1;
+	}
+	dt_add_property(np, "interrupt-map", map, sizeof(map));
+}
+
 static void psi_create_mm_dtnode(struct psi *psi)
 {
 	struct dt_node *np;
@@ -871,6 +885,7 @@ static void psi_create_mm_dtnode(struct psi *psi)
 	case proc_gen_p9:
 		dt_add_property_strings(np, "compatible", "ibm,psi",
 					"ibm,power9-psi");
+		psi_create_p9_int_map(psi, np);
 		break;
 	default:
 		dt_add_property_strings(np, "compatible", "ibm,psi");