diff options
-rw-r--r-- | src/drivers/net/3c595.c | 22 | ||||
-rw-r--r-- | src/drivers/net/3c90x.c | 23 | ||||
-rw-r--r-- | src/drivers/net/davicom.c | 23 | ||||
-rw-r--r-- | src/drivers/net/dmfe.c | 42 |
4 files changed, 60 insertions, 50 deletions
diff --git a/src/drivers/net/3c595.c b/src/drivers/net/3c595.c index cac698d..96c623f 100644 --- a/src/drivers/net/3c595.c +++ b/src/drivers/net/3c595.c @@ -31,6 +31,9 @@ #include "3c595.h" #include "timer.h" +static struct nic_operations t595_operations; +static struct pci_driver t595_driver; + static unsigned short eth_nic_base; static unsigned short vx_connector, vx_connectors; @@ -466,20 +469,20 @@ static void t595_irq(struct nic *nic __unused, irq_action_t action __unused) ETH_PROBE - Look for an adapter ***************************************************************************/ static int t595_probe ( struct dev *dev ) { - struct nic *nic = nic_device ( dev ); - struct pci_device *pci = pci_device ( dev ); int i; unsigned short *p; + if ( ! find_pci_device ( pci, &t595_driver ) ) + return 0; + if (pci->ioaddr == 0) return 0; -/* eth_nic_base = probeaddrs[0] & ~3; */ eth_nic_base = pci->ioaddr; nic->irqno = 0; - nic->ioaddr = pci->ioaddr & ~3; + nic->ioaddr = pci->ioaddr; GO_WINDOW(0); outw(GLOBAL_RESET, BASE + VX_COMMAND); @@ -508,17 +511,18 @@ static int t595_probe ( struct dev *dev ) { printf("Ethernet address: %!\n", nic->node_addr); t595_reset(nic); -static struct nic_operations t595_operations; + nic->nic_op = &t595_operations; + return 1; + +} + static struct nic_operations t595_operations = { .connect = dummy_connect, .poll = t595_poll, .transmit = t595_transmit, .irq = t595_irq, .disable = t595_disable, -}; nic->nic_op = &t595_operations; - return 1; - -} +}; static struct pci_id t595_nics[] = { PCI_ROM(0x10b7, 0x5900, "3c590", "3Com590"), /* Vortex 10Mbps */ diff --git a/src/drivers/net/3c90x.c b/src/drivers/net/3c90x.c index 9535076..7805bb0 100644 --- a/src/drivers/net/3c90x.c +++ b/src/drivers/net/3c90x.c @@ -42,6 +42,9 @@ #include "pci.h" #include "timer.h" +static struct nic_operations a3c90x_operations; +static struct pci_driver a3c90x_driver; + #define XCVR_MAGIC (0x5A00) /** any single transmission fails after 16 collisions or other errors ** this is the number of times to retry the transmission -- this should @@ -688,9 +691,7 @@ static void a3c90x_irq(struct nic *nic __unused, irq_action_t action __unused) *** card. We just have to init it here. ***/ static int a3c90x_probe ( struct dev *dev ) { - struct nic *nic = nic_device ( dev ); - struct pci_device *pci = pci_device ( dev ); int i, c; unsigned short eeprom[0x21]; @@ -700,12 +701,13 @@ static int a3c90x_probe ( struct dev *dev ) { unsigned short linktype; #define HWADDR_OFFSET 10 + if ( ! find_pci_device ( pci, &a3c90x_driver ) ) + return 0; + if (pci->ioaddr == 0) return 0; - adjust_pci_device(pci); - - nic->ioaddr = pci->ioaddr & ~3; + nic->ioaddr = pci->ioaddr; nic->irqno = 0; INF_3C90X.IOAddr = pci->ioaddr & ~3; @@ -951,18 +953,17 @@ static int a3c90x_probe ( struct dev *dev ) { cmdAcknowledgeInterrupt, 0x661); /** Set our exported functions **/ -static struct nic_operations a3c90x_operations; + nic->nic_op = &a3c90x_operations; + return 1; +} + static struct nic_operations a3c90x_operations = { .connect = dummy_connect, .poll = a3c90x_poll, .transmit = a3c90x_transmit, .irq = a3c90x_irq, .disable = a3c90x_disable, -}; nic->nic_op = &a3c90x_operations; - - return 1; -} - +}; static struct pci_id a3c90x_nics[] = { /* Original 90x revisions: */ diff --git a/src/drivers/net/davicom.c b/src/drivers/net/davicom.c index b7e9a72..44e2bf2 100644 --- a/src/drivers/net/davicom.c +++ b/src/drivers/net/davicom.c @@ -129,6 +129,9 @@ struct rxdesc { /* Global Storage */ /*********************************************************************/ +static struct nic_operations davicom_operations; +static struct pci_driver davicom_driver; + /* PCI Bus parameters */ static unsigned short vendor, dev_id; static unsigned long ioaddr; @@ -653,26 +656,27 @@ static void davicom_irq(struct nic *nic __unused, irq_action_t action __unused) /* eth_probe - Look for an adapter */ /*********************************************************************/ static int davicom_probe ( struct dev *dev ) { - struct nic *nic = nic_device ( dev ); - struct pci_device *pci = pci_device ( dev ); unsigned int i; whereami("davicom_probe\n"); + if ( ! find_pci_device ( pci, &davicom_driver ) ) + return 0; + if (pci->ioaddr == 0) return 0; vendor = pci->vendor; dev_id = pci->dev_id; - ioaddr = pci->ioaddr & ~3; + ioaddr = pci->ioaddr; nic->irqno = 0; - nic->ioaddr = pci->ioaddr & ~3; + nic->ioaddr = pci->ioaddr; /* wakeup chip */ - pcibios_write_config_dword(pci->bus, pci->devfn, 0x40, 0x00000000); + pci_write_config_dword(pci, 0x40, 0x00000000); /* Stop the chip's Tx and Rx processes. */ outl(inl(ioaddr + CSR6) & ~0x00002002, ioaddr + CSR6); @@ -694,7 +698,10 @@ static int davicom_probe ( struct dev *dev ) { /* initialize device */ davicom_reset(nic); -static struct nic_operations davicom_operations; + nic->nic_op = &davicom_operations; + return 1; +} + static struct nic_operations davicom_operations = { .connect = dummy_connect, .poll = davicom_poll, @@ -702,10 +709,6 @@ static struct nic_operations davicom_operations = { .irq = davicom_irq, .disable = davicom_disable, }; - nic->nic_op = &davicom_operations; - - return 1; -} static struct pci_id davicom_nics[] = { PCI_ROM(0x1282, 0x9100, "davicom9100", "Davicom 9100"), diff --git a/src/drivers/net/dmfe.c b/src/drivers/net/dmfe.c index 2366874..0aacec5 100644 --- a/src/drivers/net/dmfe.c +++ b/src/drivers/net/dmfe.c @@ -195,12 +195,13 @@ enum dmfe_CR6_bits { }; /* Global variable declaration ----------------------------- */ -static int dmfe_debug; +static struct nic_operations dmfe_operations; +static struct pci_driver dmfe_driver; + static unsigned char dmfe_media_mode = DMFE_AUTO; static u32 dmfe_cr6_user_set; /* For module input parameter */ -static int debug; static u8 chkmode = 1; static u8 HPNA_mode; /* Default: Low Power/High Speed */ static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */ @@ -245,8 +246,6 @@ static u16 phy_read(unsigned long, u8, u8, u32); static void phy_write(unsigned long, u8, u8, u16, u32); static void phy_write_1bit(unsigned long, u32); static u16 phy_read_1bit(unsigned long); -static u8 dmfe_sense_speed(struct nic *nic); -static void dmfe_process_mode(struct nic *nic); static void dmfe_set_phyxcer(struct nic *nic); static void dmfe_parse_srom(struct nic *nic); @@ -461,19 +460,20 @@ PROBE - Look for an adapter, this routine's visible to the outside #define board_found 1 #define valid_link 0 static int dmfe_probe ( struct dev *dev ) { - struct nic *nic = nic_device ( dev ); - struct pci_device *pci = pci_device ( dev ); uint32_t dev_rev, pci_pmr; int i; + if ( ! find_pci_device ( pci, &dmfe_driver ) ) + return 0; + if (pci->ioaddr == 0) return 0; BASE = pci->ioaddr; printf("dmfe.c: Found %s Vendor=0x%hX Device=0x%hX\n", - pci->name, pci->vendor, pci->dev_id); + dev->name, pci->vendor, pci->dev_id); /* Read Chip revision */ pci_read_config_dword(pci, PCI_REVISION_ID, &dev_rev); @@ -504,7 +504,7 @@ static int dmfe_probe ( struct dev *dev ) { nic->node_addr[i] = db->srom[20 + i]; /* Print out some hardware info */ - printf("%s: %! at ioaddr %hX\n", pci->name, nic->node_addr, BASE); + printf("%s: %! at ioaddr %hX\n", dev->name, nic->node_addr, BASE); /* Set the card as PCI Bus Master */ adjust_pci_device(pci); @@ -515,14 +515,7 @@ static int dmfe_probe ( struct dev *dev ) { nic->ioaddr = pci->ioaddr; /* point to NIC specific routines */ -static struct nic_operations dmfe_operations; -static struct nic_operations dmfe_operations = { - .connect = dummy_connect, - .poll = dmfe_poll, - .transmit = dmfe_transmit, - .irq = dmfe_irq, - .disable = dmfe_disable, -}; nic->nic_op = &dmfe_operations; + nic->nic_op = &dmfe_operations; return 1; } @@ -551,7 +544,7 @@ static void dmfe_descriptor_init(struct nic *nic __unused, unsigned long ioaddr) txd[i].tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ txd[i].tdes2 = cpu_to_le32(virt_to_bus(&txb[i])); txd[i].tdes3 = cpu_to_le32(virt_to_bus(&txd[i + 1])); - txd[i].next_tx_desc = cpu_to_le32(&txd[i + 1]); + txd[i].next_tx_desc = virt_to_le32desc(&txd[i + 1]); } /* Mark the last entry as wrapping the ring */ txd[i - 1].tdes3 = virt_to_le32desc(&txd[0]); @@ -565,7 +558,7 @@ static void dmfe_descriptor_init(struct nic *nic __unused, unsigned long ioaddr) rxd[i].rdes2 = cpu_to_le32(virt_to_bus(&rxb[i * RX_ALLOC_SIZE])); rxd[i].rdes3 = cpu_to_le32(virt_to_bus(&rxd[i + 1])); - rxd[i].next_rx_desc = cpu_to_le32(&rxd[i + 1]); + rxd[i].next_rx_desc = virt_to_le32desc(&rxd[i + 1]); } /* Mark the last entry as wrapping the ring */ rxd[i - 1].rdes3 = cpu_to_le32(virt_to_bus(&rxd[0])); @@ -722,6 +715,7 @@ static u16 read_srom_word(long ioaddr, int offset) * Auto sense the media mode */ +#if 0 /* not used */ static u8 dmfe_sense_speed(struct nic *nic __unused) { u8 ErrFlag = 0; @@ -769,7 +763,7 @@ static u8 dmfe_sense_speed(struct nic *nic __unused) return ErrFlag; } - +#endif /* * Set 10/100 phyxcer capability @@ -841,6 +835,7 @@ static void dmfe_set_phyxcer(struct nic *nic __unused) * N-way force capability with SWITCH */ +#if 0 /* not used */ static void dmfe_process_mode(struct nic *nic __unused) { u16 phy_reg; @@ -890,7 +885,7 @@ static void dmfe_process_mode(struct nic *nic __unused) } } } - +#endif /* * Write a word to Phy register @@ -1217,6 +1212,13 @@ static void dmfe_program_DM9802(struct nic *nic __unused) phy_write(BASE, db->phy_addr, 25, phy_reg, db->chip_id); } +static struct nic_operations dmfe_operations = { + .connect = dummy_connect, + .poll = dmfe_poll, + .transmit = dmfe_transmit, + .irq = dmfe_irq, + .disable = dmfe_disable, +}; static struct pci_id dmfe_nics[] = { PCI_ROM(0x1282, 0x9100, "dmfe9100", "Davicom 9100"), |