/** @file Implementation of the command set of USB Mass Storage Specification for Bootability, Revision 1.0. Copyright (c) 2007 - 2008, Intel Corporation All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #include "UsbMassImpl.h" /** Execute REQUEST SENSE Command to retrieve sense data from device. @param UsbMass The device whose sense data is requested. @retval EFI_SUCCESS The command is excuted successfully. @retval EFI_DEVICE_ERROR Failed to request sense. @retval EFI_NO_RESPONSE The device media doesn't response this request. @retval EFI_INVALID_PARAMETER The command has some invalid parameters. @retval EFI_WRITE_PROTECTED The device is write protected. @retval EFI_MEDIA_CHANGED The device media has been changed. **/ EFI_STATUS UsbBootRequestSense ( IN USB_MASS_DEVICE *UsbMass ) { USB_BOOT_REQUEST_SENSE_CMD SenseCmd; USB_BOOT_REQUEST_SENSE_DATA SenseData; EFI_BLOCK_IO_MEDIA *Media; USB_MASS_TRANSPORT *Transport; EFI_STATUS Status; UINT32 CmdResult; Transport = UsbMass->Transport; // // Request the sense data from the device // ZeroMem (&SenseCmd, sizeof (USB_BOOT_REQUEST_SENSE_CMD)); ZeroMem (&SenseData, sizeof (USB_BOOT_REQUEST_SENSE_DATA)); SenseCmd.OpCode = USB_BOOT_REQUEST_SENSE_OPCODE; SenseCmd.Lun = (UINT8) (USB_BOOT_LUN (UsbMass->Lun)); SenseCmd.AllocLen = sizeof (USB_BOOT_REQUEST_SENSE_DATA); Status = Transport->ExecCommand ( UsbMass->Context, &SenseCmd, sizeof (USB_BOOT_REQUEST_SENSE_CMD), EfiUsbDataIn, &SenseData, sizeof (USB_BOOT_REQUEST_SENSE_DATA), UsbMass->Lun, USB_BOOT_GENERAL_CMD_TIMEOUT, &CmdResult ); if (EFI_ERROR (Status) || CmdResult != USB_MASS_CMD_SUCCESS) { DEBUG ((EFI_D_ERROR, "UsbBootRequestSense: (%r) CmdResult=0x%x\n", Status, CmdResult)); return Status; } // // If sense data is retrieved successfully, interpret the sense data // and update the media status if necessary. // Media = &UsbMass->BlockIoMedia; switch (USB_BOOT_SENSE_KEY (SenseData.SenseKey)) { case USB_BOOT_SENSE_NO_SENSE: Status = EFI_NO_RESPONSE; break; case USB_BOOT_SENSE_RECOVERED: // // Suppose hardware can handle this case, and recover later by itself // Status = EFI_NOT_READY; break; case USB_BOOT_SENSE_NOT_READY: Status = EFI_DEVICE_ERROR; if (SenseData.ASC == USB_BOOT_ASC_NO_MEDIA) { Media->MediaPresent = FALSE; Status = EFI_NO_MEDIA; } else if (SenseData.ASC == USB_BOOT_ASC_NOT_READY) { Status = EFI_NOT_READY; } break; case USB_BOOT_SENSE_ILLEGAL_REQUEST: Status = EFI_INVALID_PARAMETER; break; case USB_BOOT_SENSE_UNIT_ATTENTION: Status = EFI_DEVICE_ERROR; if (SenseData.ASC == USB_BOOT_ASC_MEDIA_CHANGE) { // // If MediaChange, reset ReadOnly and new MediaId // Status = EFI_MEDIA_CHANGED; Media->ReadOnly = FALSE; Media->MediaId++; } break; case USB_BOOT_SENSE_DATA_PROTECT: Status = EFI_WRITE_PROTECTED; Media->ReadOnly = TRUE; break; default: Status = EFI_DEVICE_ERROR; break; } DEBUG ((EFI_D_INFO, "UsbBootRequestSense: (%r) with sense key %x/%x/%x\n", Status, USB_BOOT_SENSE_KEY (SenseData.SenseKey), SenseData.ASC, SenseData.ASCQ )); return Status; } /** Execute the USB mass storage bootability commands. This function executes the USB mass storage bootability commands. If execution failed, retrieve the error by REQUEST_SENSE, then update the device's status, such as ReadyOnly. @param UsbMass The device to issue commands to @param Cmd The command to execute @param CmdLen The length of the command @param DataDir The direction of data transfer @param Data The buffer to hold the data @param DataLen The length of expected data @param Timeout The timeout used to transfer @retval EFI_SUCCESS Command is excuted successfully @retval Others Command execution failed. **/ EFI_STATUS UsbBootExecCmd ( IN USB_MASS_DEVICE *UsbMass, IN VOID *Cmd, IN UINT8 CmdLen, IN EFI_USB_DATA_DIRECTION DataDir, IN VOID *Data, IN UINT32 DataLen, IN UINT32 Timeout ) { USB_MASS_TRANSPORT *Transport; EFI_STATUS Status; UINT32 CmdResult; Transport = UsbMass->Transport; Status = Transport->ExecCommand ( UsbMass->Context, Cmd, CmdLen, DataDir, Data, DataLen, UsbMass->Lun, Timeout, &CmdResult ); // // If ExecCommand() returns no error and CmdResult is success, // then the commnad transfer is successful. // if ((CmdResult == USB_MASS_CMD_SUCCESS) && !EFI_ERROR (Status)) { return EFI_SUCCESS; } DEBUG ((EFI_D_INFO, "UsbBootExecCmd: Fail to Exec 0x%x Cmd /w %r\n", *(UINT8 *)Cmd ,Status)); // // If command execution failed, then retrieve error info via sense request. // return UsbBootRequestSense (UsbMass); } /** Execute the USB mass storage bootability commands with retrial. This function executes USB mass storage bootability commands. If the device isn't ready, wait for it. If the device is ready and error occurs, retry the command again until it exceeds the limit of retrial times. @param UsbMass The device to issue commands to @param Cmd The command to execute @param CmdLen The length of the command @param DataDir The direction of data transfer @param Data The buffer to hold the data @param DataLen The length of expected data @param Timeout The timeout used to transfer @retval EFI_SUCCESS The command is executed successfully. @retval EFI_MEDIA_CHANGED The device media has been changed. @retval Others Command execution failed after retrial. **/ EFI_STATUS UsbBootExecCmdWithRetry ( IN USB_MASS_DEVICE *UsbMass, IN VOID *Cmd, IN UINT8 CmdLen, IN EFI_USB_DATA_DIRECTION DataDir, IN VOID *Data, IN UINT32 DataLen, IN UINT32 Timeout ) { EFI_STATUS Status; UINTN Retry; Status = EFI_SUCCESS; for (Retry = 0; Retry < USB_BOOT_COMMAND_RETRY; Retry++) { Status = UsbBootExecCmd ( UsbMass, Cmd, CmdLen, DataDir, Data, DataLen, Timeout ); if (Status == EFI_SUCCESS || Status == EFI_MEDIA_CHANGED) { break; } // // If the device isn't ready, just wait for it without limit on retrial times. // if (Status == EFI_NOT_READY) { Retry = 0; } } return Status; } /** Execute TEST UNIT READY command to check if the device is ready. @param UsbMass The device to test @retval EFI_SUCCESS The device is ready. @retval Others Device not ready. **/ EFI_STATUS UsbBootIsUnitReady ( IN USB_MASS_DEVICE *UsbMass ) { USB_BOOT_TEST_UNIT_READY_CMD TestCmd; ZeroMem (&TestCmd, sizeof (USB_BOOT_TEST_UNIT_READY_CMD)); TestCmd.OpCode = USB_BOOT_TEST_UNIT_READY_OPCODE; TestCmd.Lun = (UINT8) (USB_BOOT_LUN (UsbMass->Lun)); return UsbBootExecCmdWithRetry ( UsbMass, &TestCmd, sizeof (USB_BOOT_TEST_UNIT_READY_CMD), EfiUsbNoData, NULL, 0, USB_BOOT_GENERAL_CMD_TIMEOUT ); } /** Execute INQUIRY Command to request information regarding parameters of the device be sent to the host computer. @param UsbMass The device to inquire. @retval EFI_SUCCESS INQUIRY Command is executed successfully. @retval Others INQUIRY Command is not executed successfully. **/ EFI_STATUS UsbBootInquiry ( IN USB_MASS_DEVICE *UsbMass ) { USB_BOOT_INQUIRY_CMD InquiryCmd; USB_BOOT_INQUIRY_DATA InquiryData; EFI_BLOCK_IO_MEDIA *Media; EFI_STATUS Status; Media = &(UsbMass->BlockIoMedia); ZeroMem (&InquiryCmd, sizeof (USB_BOOT_INQUIRY_CMD)); ZeroMem (&InquiryData, sizeof (USB_BOOT_INQUIRY_DATA)); InquiryCmd.OpCode = USB_BOOT_INQUIRY_OPCODE; InquiryCmd.Lun = (UINT8) (USB_BOOT_LUN (UsbMass->Lun)); InquiryCmd.AllocLen = sizeof (InquiryData); Status = UsbBootExecCmdWithRetry ( UsbMass, &InquiryCmd, sizeof (USB_BOOT_INQUIRY_CMD), EfiUsbDataIn, &InquiryData, sizeof (USB_BOOT_INQUIRY_DATA), USB_BOOT_GENERAL_CMD_TIMEOUT ); if (EFI_ERROR (Status)) { return Status; } // // Get information from PDT (Peripheral Device Type) field and Removable Medium Bit // from the inquiry data. // UsbMass->Pdt = (UINT8) (USB_BOOT_PDT (InquiryData.Pdt)); Media->RemovableMedia = (BOOLEAN) (USB_BOOT_REMOVABLE (InquiryData.Removable)); // // Set block size to the default value of 512 Bytes, in case no media is present at first time. // Media->BlockSize = 0x0200; return Status; } /** Execute READ CAPACITY command to request information regarding the capacity of the installed medium of the device. This function executes READ CAPACITY command to get the capacity of the USB mass storage media, including the presence, block size, and last block number. @param UsbMass The device to retireve disk gemotric. @retval EFI_SUCCESS The disk geometry is successfully retrieved. @retval EFI_NOT_READY The returned block size is zero. @retval Other READ CAPACITY command execution failed. **/ EFI_STATUS UsbBootReadCapacity ( IN USB_MASS_DEVICE *UsbMass ) { USB_BOOT_READ_CAPACITY_CMD CapacityCmd; USB_BOOT_READ_CAPACITY_DATA CapacityData; EFI_BLOCK_IO_MEDIA *Media; EFI_STATUS Status; Media = &UsbMass->BlockIoMedia; ZeroMem (&CapacityCmd, sizeof (USB_BOOT_READ_CAPACITY_CMD)); ZeroMem (&CapacityData, sizeof (USB_BOOT_READ_CAPACITY_DATA)); CapacityCmd.OpCode = USB_BOOT_READ_CAPACITY_OPCODE; CapacityCmd.Lun = (UINT8) (USB_BOOT_LUN (UsbMass->Lun)); Status = UsbBootExecCmdWithRetry ( UsbMass, &CapacityCmd, sizeof (USB_BOOT_READ_CAPACITY_CMD), EfiUsbDataIn, &CapacityData, sizeof (USB_BOOT_READ_CAPACITY_DATA), USB_BOOT_GENERAL_CMD_TIMEOUT ); if (EFI_ERROR (Status)) { return Status; } // // Get the information on media presence, block size, and last block number // from READ CAPACITY data. // Media->MediaPresent = TRUE; Media->LastBlock = SwapBytes32 (ReadUnaligned32 ((CONST UINT32 *) CapacityData.LastLba)); Media->BlockSize = SwapBytes32 (ReadUnaligned32 ((CONST UINT32 *) CapacityData.BlockLen)); if (Media->BlockSize == 0) { return EFI_NOT_READY; } DEBUG ((EFI_D_INFO, "UsbBootReadCapacity Success LBA=%ld BlockSize=%d\n", Media->LastBlock, Media->BlockSize)); return EFI_SUCCESS; } /** Retrieves SCSI mode sense information via MODE SENSE(6) command. @param UsbMass The device whose sense data is requested. @retval EFI_SUCCESS SCSI mode sense information retrieved successfully. @retval Other Command execution failed. **/ EFI_STATUS UsbScsiModeSense ( IN USB_MASS_DEVICE *UsbMass ) { EFI_STATUS Status; USB_SCSI_MODE_SENSE6_CMD ModeSenseCmd; USB_SCSI_MODE_SENSE6_PARA_HEADER ModeParaHeader; EFI_BLOCK_IO_MEDIA *Media; Media = &UsbMass->BlockIoMedia; ZeroMem (&ModeSenseCmd, sizeof (USB_SCSI_MODE_SENSE6_CMD)); ZeroMem (&ModeParaHeader, sizeof (USB_SCSI_MODE_SENSE6_PARA_HEADER)); // // MODE SENSE(6) command is defined in Section 8.2.10 of SCSI-2 Spec // ModeSenseCmd.OpCode = USB_SCSI_MODE_SENSE6_OPCODE; ModeSenseCmd.Lun = (UINT8) USB_BOOT_LUN (UsbMass->Lun); ModeSenseCmd.PageCode = 0x3F; ModeSenseCmd.AllocateLen = (UINT8) sizeof (USB_SCSI_MODE_SENSE6_PARA_HEADER); Status = UsbBootExecCmdWithRetry ( UsbMass, &ModeSenseCmd, sizeof (USB_SCSI_MODE_SENSE6_CMD), EfiUsbDataIn, &ModeParaHeader, sizeof (USB_SCSI_MODE_SENSE6_PARA_HEADER), USB_BOOT_GENERAL_CMD_TIMEOUT ); // // Format of device-specific parameter byte of the mode parameter header is defined in // Section 8.2.10 of SCSI-2 Spec. // BIT7 of this byte is indicates whether the medium is write protected. // if (!EFI_ERROR (Status)) { Media->ReadOnly = (BOOLEAN) ((ModeParaHeader.DevicePara & BIT7) != 0); } return Status; } /** Get the parameters for the USB mass storage media. This function get the parameters for the USB mass storage media, It is used both to initialize the media during the Start() phase of Driver Binding Protocol and to re-initialize it when the media is changed. Althought the RemoveableMedia is unlikely to change, it is also included here. @param UsbMass The device to retrieve disk gemotric. @retval EFI_SUCCESS The disk gemotric is successfully retrieved. @retval Other Failed to get the parameters. **/ EFI_STATUS UsbBootGetParams ( IN USB_MASS_DEVICE *UsbMass ) { EFI_BLOCK_IO_MEDIA *Media; EFI_STATUS Status; UINT8 CmdSet; Media = &(UsbMass->BlockIoMedia); CmdSet = ((EFI_USB_INTERFACE_DESCRIPTOR *) (UsbMass->Context))->InterfaceSubClass; Status = UsbBootInquiry (UsbMass); if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "UsbBootGetParams: UsbBootInquiry (%r)\n", Status)); return Status; } // // Don't use the Removable bit in inquiry data to test whether the media // is removable because many flash disks wrongly set this bit. // if ((UsbMass->Pdt == USB_PDT_CDROM) || (UsbMass->Pdt == USB_PDT_OPTICAL)) { // // CD-Rom device and Non-CD optical device // UsbMass->OpticalStorage = TRUE; // // Default value 2048 Bytes, in case no media present at first time // Media->BlockSize = 0x0800; } if ((UsbMass->Pdt != USB_PDT_CDROM) && (CmdSet == USB_MASS_STORE_SCSI)) { // // ModeSense is required for the device with PDT of 0x00/0x07/0x0E, // which is from [MassStorageBootabilitySpec-Page7]. // ModeSense(10) is useless here, while ModeSense(6) defined in SCSI // could get the information of WriteProtected. // Since not all device support this command, so skip if fail. // UsbScsiModeSense (UsbMass); } return UsbBootReadCapacity (UsbMass); } /** Detect whether the removable media is present and whether it has changed. @param UsbMass The device to check. @retval EFI_SUCCESS The media status is successfully checked. @retval Other Failed to detect media. **/ EFI_STATUS UsbBootDetectMedia ( IN USB_MASS_DEVICE *UsbMass ) { EFI_BLOCK_IO_MEDIA OldMedia; EFI_BLOCK_IO_MEDIA *Media; UINT8 CmdSet; EFI_TPL OldTpl; EFI_STATUS Status; Media = &UsbMass->BlockIoMedia; CopyMem (&OldMedia, &(UsbMass->BlockIoMedia), sizeof (EFI_BLOCK_IO_MEDIA)); CmdSet = ((EFI_USB_INTERFACE_DESCRIPTOR *) (UsbMass->Context))->InterfaceSubClass; Status = UsbBootIsUnitReady (UsbMass); if (EFI_ERROR (Status)) { goto ON_ERROR; } if ((UsbMass->Pdt != USB_PDT_CDROM) && (CmdSet == USB_MASS_STORE_SCSI)) { // // MODE SENSE is required for the device with PDT of 0x00/0x07/0x0E, // according to Section 4 of USB Mass Storage Specification for Bootability. // MODE SENSE(10) is useless here, while MODE SENSE(6) defined in SCSI // could get the information of Write Protected. // Since not all device support this command, skip if fail. // UsbScsiModeSense (UsbMass); } Status = UsbBootReadCapacity (UsbMass); if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "UsbBootDetectMedia: UsbBootReadCapacity (%r)\n", Status)); goto ON_ERROR; } return EFI_SUCCESS; ON_ERROR: // // Detect whether it is necessary to reinstall the Block I/O Protocol. // // MediaId may change in RequestSense for MediaChanged // MediaPresent may change in RequestSense for NoMedia // MediaReadOnly may change in RequestSense for WriteProtected or MediaChanged // MediaPresent/BlockSize/LastBlock may change in ReadCapacity // if ((Media->MediaId != OldMedia.MediaId) || (Media->MediaPresent != OldMedia.MediaPresent) || (Media->ReadOnly != OldMedia.ReadOnly) || (Media->BlockSize != OldMedia.BlockSize) || (Media->LastBlock != OldMedia.LastBlock)) { // // This function is called by Block I/O Protocol APIs, which run at TPL_NOTIFY. // Here we temporarily restore TPL to TPL_CALLBACK to invoke ReinstallProtocolInterface(). // OldTpl = EfiGetCurrentTpl (); gBS->RestoreTPL (TPL_CALLBACK); gBS->ReinstallProtocolInterface ( UsbMass->Controller, &gEfiBlockIoProtocolGuid, &UsbMass->BlockIo, &UsbMass->BlockIo ); ASSERT (EfiGetCurrentTpl () == TPL_CALLBACK); gBS->RaiseTPL (OldTpl); // // Update MediaId after reinstalling Block I/O Protocol. // if (Media->MediaPresent != OldMedia.MediaPresent) { if (Media->MediaPresent) { Media->MediaId = 1; } else { Media->MediaId = 0; } } if ((Media->ReadOnly != OldMedia.ReadOnly) || (Media->BlockSize != OldMedia.BlockSize) || (Media->LastBlock != OldMedia.LastBlock)) { Media->MediaId++; } } return Status; } /** Read some blocks from the device. @param UsbMass The USB mass storage device to read from @param Lba The start block number @param TotalBlock Total block number to read @param Buffer The buffer to read to @retval EFI_SUCCESS Data are read into the buffer @retval Others Failed to read all the data **/ EFI_STATUS UsbBootReadBlocks ( IN USB_MASS_DEVICE *UsbMass, IN UINT32 Lba, IN UINTN TotalBlock, OUT UINT8 *Buffer ) { USB_BOOT_READ10_CMD ReadCmd; EFI_STATUS Status; UINT16 Count; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout; BlockSize = UsbMass->BlockIoMedia.BlockSize; Status = EFI_SUCCESS; while (TotalBlock > 0) { // // Split the total blocks into smaller pieces to ease the pressure // on the device. We must split the total block because the READ10 // command only has 16 bit transfer length (in the unit of block). // Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock : USB_BOOT_IO_BLOCKS); ByteSize = (UINT32)Count * BlockSize; // // USB command's upper limit timeout is 5s. [USB2.0-9.2.6.1] // Timeout = (UINT32) USB_BOOT_GENERAL_CMD_TIMEOUT; // // Fill in the command then execute // ZeroMem (&ReadCmd, sizeof (USB_BOOT_READ10_CMD)); ReadCmd.OpCode = USB_BOOT_READ10_OPCODE; ReadCmd.Lun = (UINT8) (USB_BOOT_LUN (UsbMass->Lun)); WriteUnaligned32 ((UINT32 *) ReadCmd.Lba, SwapBytes32 (Lba)); WriteUnaligned16 ((UINT16 *) ReadCmd.TransferLen, SwapBytes16 (Count)); Status = UsbBootExecCmdWithRetry ( UsbMass, &ReadCmd, sizeof (USB_BOOT_READ10_CMD), EfiUsbDataIn, Buffer, ByteSize, Timeout ); if (EFI_ERROR (Status)) { return Status; } Lba += Count; Buffer += Count * BlockSize; TotalBlock -= Count; } return Status; } /** Write some blocks to the device. @param UsbMass The USB mass storage device to write to @param Lba The start block number @param TotalBlock Total block number to write @param Buffer Pointer to the source buffer for the data. @retval EFI_SUCCESS Data are written into the buffer @retval Others Failed to write all the data **/ EFI_STATUS UsbBootWriteBlocks ( IN USB_MASS_DEVICE *UsbMass, IN UINT32 Lba, IN UINTN TotalBlock, IN UINT8 *Buffer ) { USB_BOOT_WRITE10_CMD WriteCmd; EFI_STATUS Status; UINT16 Count; UINT32 BlockSize; UINT32 ByteSize; UINT32 Timeout; BlockSize = UsbMass->BlockIoMedia.BlockSize; Status = EFI_SUCCESS; while (TotalBlock > 0) { // // Split the total blocks into smaller pieces to ease the pressure // on the device. We must split the total block because the WRITE10 // command only has 16 bit transfer length (in the unit of block). // Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock : USB_BOOT_IO_BLOCKS); ByteSize = (UINT32)Count * BlockSize; // // USB command's upper limit timeout is 5s. [USB2.0-9.2.6.1] // Timeout = (UINT32) USB_BOOT_GENERAL_CMD_TIMEOUT; // // Fill in the write10 command block // ZeroMem (&WriteCmd, sizeof (USB_BOOT_WRITE10_CMD)); WriteCmd.OpCode = USB_BOOT_WRITE10_OPCODE; WriteCmd.Lun = (UINT8) (USB_BOOT_LUN (UsbMass->Lun)); WriteUnaligned32 ((UINT32 *) WriteCmd.Lba, SwapBytes32 (Lba)); WriteUnaligned16 ((UINT16 *) WriteCmd.TransferLen, SwapBytes16 (Count)); Status = UsbBootExecCmdWithRetry ( UsbMass, &WriteCmd, sizeof (USB_BOOT_WRITE10_CMD), EfiUsbDataOut, Buffer, ByteSize, Timeout ); if (EFI_ERROR (Status)) { return Status; } Lba += Count; Buffer += Count * BlockSize; TotalBlock -= Count; } return Status; } /** Use the USB clear feature control transfer to clear the endpoint stall condition. @param UsbIo The USB I/O Protocol instance @param EndpointAddr The endpoint to clear stall for @retval EFI_SUCCESS The endpoint stall condition is cleared. @retval Others Failed to clear the endpoint stall condition. **/ EFI_STATUS UsbClearEndpointStall ( IN EFI_USB_IO_PROTOCOL *UsbIo, IN UINT8 EndpointAddr ) { EFI_USB_DEVICE_REQUEST Request; EFI_STATUS Status; UINT32 CmdResult; UINT32 Timeout; Request.RequestType = 0x02; Request.Request = USB_REQ_CLEAR_FEATURE; Request.Value = USB_FEATURE_ENDPOINT_HALT; Request.Index = EndpointAddr; Request.Length = 0; Timeout = USB_BOOT_GENERAL_CMD_TIMEOUT / USB_MASS_1_MILLISECOND; Status = UsbIo->UsbControlTransfer ( UsbIo, &Request, EfiUsbNoData, Timeout, NULL, 0, &CmdResult ); return Status; }