From 64b41a0710cb8bea96daca72c6339e6b19e54c89 Mon Sep 17 00:00:00 2001 From: xli24 Date: Wed, 7 Mar 2007 09:34:54 +0000 Subject: Fix the issue of Linux cannot boot and reset on IPF. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@2423 6f19259b-4bc3-4df7-8a09-765794883524 --- EdkModulePkg/Bus/Pci/IdeBus/Dxe/ata.c | 1403 ++++++++++++++++++++++++----- EdkModulePkg/Bus/Pci/IdeBus/Dxe/ide.h | 36 - EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c | 6 +- EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.h | 2 +- EdkModulePkg/Bus/Pci/IdeBus/Dxe/idedata.h | 7 - 5 files changed, 1157 insertions(+), 297 deletions(-) (limited to 'EdkModulePkg/Bus') diff --git a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/ata.c b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/ata.c index 44e7347..aea126b 100644 --- a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/ata.c +++ b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/ata.c @@ -1075,23 +1075,20 @@ AtaBlkIoReadBlocks ( return EFI_INVALID_PARAMETER; } - Status = EFI_SUCCESS; if (IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) { // // For ATA/ATAPI-6 device(capcity > 120GB), use ATA-6 read block mechanism // - if (IdeBlkIoDevice->UdmaMode.Valid) { - Status = AtaUdmaReadExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); - } else { + Status = AtaUdmaReadExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); + if (EFI_ERROR (Status)) { Status = AtaReadSectorsExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); } } else { // // For ATA-3 compatible device, use ATA-3 read block mechanism // - if (IdeBlkIoDevice->UdmaMode.Valid) { - Status = AtaUdmaRead (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); - } else { + Status = AtaUdmaRead (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); + if (EFI_ERROR (Status)) { Status = AtaReadSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); } } @@ -1199,23 +1196,20 @@ AtaBlkIoWriteBlocks ( return EFI_INVALID_PARAMETER; } - Status = EFI_SUCCESS; if (IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) { // // For ATA/ATAPI-6 device(capcity > 120GB), use ATA-6 write block mechanism // - if (IdeBlkIoDevice->UdmaMode.Valid) { - Status = AtaUdmaWriteExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); - } else { + Status = AtaUdmaWriteExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); + if (EFI_ERROR (Status)) { Status = AtaWriteSectorsExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); } } else { // // For ATA-3 compatible device, use ATA-3 write block mechanism // - if (IdeBlkIoDevice->UdmaMode.Valid) { - Status = AtaUdmaWrite (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); - } else { + Status = AtaUdmaWrite (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); + if (EFI_ERROR (Status)) { Status = AtaWriteSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks); } } @@ -2113,198 +2107,29 @@ AtaUdmaReadExt ( IN UINTN NumberOfBlocks ) { - return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaReadExtOp); -} - -/** - This function is called by the AtaBlkIoReadBlocks() to perform - reading from media in block unit. The function has been enhanced to - support >120GB access and transfer at most 65536 blocks per command - - @param[in] *IdeDev - pointer pointing to IDE_BLK_IO_DEV data structure, used - to record all the information of the IDE device. - - @param[in] *DataBuffer A pointer to the destination buffer for the data. - @param[in] StartLba The starting logical block address to read from - on the device media. - @param[in] NumberOfBlocks The number of transfer data blocks. - - @return The device status of UDMA operation. If the operation is - successful, return EFI_SUCCESS. - - TODO: EFI_UNSUPPORTED - add return value to function comment - TODO: EFI_DEVICE_ERROR - add return value to function comment - TODO: EFI_DEVICE_ERROR - add return value to function comment - TODO: EFI_DEVICE_ERROR - add return value to function comment -**/ -EFI_STATUS -AtaUdmaRead ( - IN IDE_BLK_IO_DEV *IdeDev, - IN VOID *DataBuffer, - IN EFI_LBA StartLba, - IN UINTN NumberOfBlocks - ) -{ - return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaReadOp); -} - -/** - This function is called by the AtaBlkIoWriteBlocks() to perform - writing to media in block unit. The function has been enhanced to - support >120GB access and transfer at most 65536 blocks per command - - @param[in] *IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used - to record all the information of the IDE device. - - @param[in] *DataBuffer A pointer to the source buffer for the data. - - @param[in] StartLba The starting logical block address to write to - on the device media. - - @param[in] NumberOfBlocks The number of transfer data blocks. - - @return The device status of UDMA operation. If the operation is - successful, return EFI_SUCCESS. - - TODO: EFI_UNSUPPORTED - add return value to function comment - TODO: EFI_DEVICE_ERROR - add return value to function comment - TODO: EFI_DEVICE_ERROR - add return value to function comment -**/ -EFI_STATUS -AtaUdmaWriteExt ( - IN IDE_BLK_IO_DEV *IdeDev, - IN VOID *DataBuffer, - IN EFI_LBA StartLba, - IN UINTN NumberOfBlocks - ) -{ - return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaWriteExtOp); -} - -/** - This function is called by the AtaBlkIoWriteBlocks() to perform - writing to media in block unit. The function has been enhanced to - support >120GB access and transfer at most 65536 blocks per command - - @param[in] *IdeDev - pointer pointing to IDE_BLK_IO_DEV data structure, used - to record all the information of the IDE device. - - @param[in] *DataBuffer - A pointer to the source buffer for the data. - - @param[in] StartLba - The starting logical block address to write to - on the device media. - - @param[in] NumberOfBlocks - The number of transfer data blocks. - - @return The device status of UDMA operation. If the operation is - successful, return EFI_SUCCESS. - - TODO: EFI_UNSUPPORTED - add return value to function comment - TODO: EFI_DEVICE_ERROR - add return value to function comment - TODO: EFI_DEVICE_ERROR - add return value to function comment -**/ -EFI_STATUS -AtaUdmaWrite ( - IN IDE_BLK_IO_DEV *IdeDev, - IN VOID *DataBuffer, - IN EFI_LBA StartLba, - IN UINTN NumberOfBlocks - ) -{ - return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaWriteOp); -} - -/** - Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt). - - @param[in] *IdeDev - pointer pointing to IDE_BLK_IO_DEV data structure, used - to record all the information of the IDE device. - - @param[in] *DataBuffer - A pointer to the source buffer for the data. - - @param[in] StartLba - The starting logical block address to write to - on the device media. - - @param[in] NumberOfBlocks - The number of transfer data blocks. - - @param[in] UdmaOp - The perform operations could be AtaUdmaReadOp, AtaUdmaReadExOp, - AtaUdmaWriteOp, AtaUdmaWriteExOp - - @return The device status of UDMA operation. If the operation is - successful, return EFI_SUCCESS. - -**/ -EFI_STATUS -DoAtaUdma ( - IN IDE_BLK_IO_DEV *IdeDev, - IN VOID *DataBuffer, - IN EFI_LBA StartLba, - IN UINTN NumberOfBlocks, - IN ATA_UDMA_OPERATION UdmaOp - ) -{ - IDE_DMA_PRD *PrdAddr; - IDE_DMA_PRD *UsedPrdAddr; - IDE_DMA_PRD *TempPrdAddr; - UINT8 RegisterValue; - UINT8 Device; - UINT64 IoPortForBmic; - UINT64 IoPortForBmis; - UINT64 IoPortForBmid; - EFI_STATUS Status; - UINTN PrdTableNum; - UINTN ByteCount; - UINTN ByteAvailable; - UINT8 *PrdBuffer; - UINTN RemainBlockNum; - UINT8 DeviceControl; - UINT32 Count; - UINTN PageCount; - VOID *Map; - VOID *MemPage; - EFI_PHYSICAL_ADDRESS DeviceAddress; - UINTN MaxDmaCommandSectors; - EFI_PCI_IO_PROTOCOL_OPERATION PciIoProtocolOp; - UINT8 AtaCommand; - - switch (UdmaOp) { - case AtaUdmaReadOp: - MaxDmaCommandSectors = MAX_DMA_COMMAND_SECTORS; - PciIoProtocolOp = EfiPciIoOperationBusMasterWrite; - AtaCommand = READ_DMA_CMD; - break; - case AtaUdmaReadExtOp: - MaxDmaCommandSectors = MAX_DMA_EXT_COMMAND_SECTORS; - PciIoProtocolOp = EfiPciIoOperationBusMasterWrite; - AtaCommand = READ_DMA_EXT_CMD; - break; - case AtaUdmaWriteOp: - MaxDmaCommandSectors = MAX_DMA_COMMAND_SECTORS; - PciIoProtocolOp = EfiPciIoOperationBusMasterRead; - AtaCommand = WRITE_DMA_CMD; - break; - case AtaUdmaWriteExtOp: - MaxDmaCommandSectors = MAX_DMA_EXT_COMMAND_SECTORS; - PciIoProtocolOp = EfiPciIoOperationBusMasterRead; - AtaCommand = WRITE_DMA_EXT_CMD; - break; - default: - return EFI_UNSUPPORTED; - break; - } - - // - // Channel and device differential + IDE_DMA_PRD *PrdAddr; + IDE_DMA_PRD *UsedPrdAddr; + IDE_DMA_PRD *TempPrdAddr; + UINT8 RegisterValue; + UINT8 Device; + UINT64 IoPortForBmic; + UINT64 IoPortForBmis; + UINT64 IoPortForBmid; + EFI_STATUS Status; + UINTN PrdTableNum; + UINTN ByteCount; + UINTN ByteAvailable; + UINT8 *PrdBuffer; + UINTN RemainBlockNum; + UINT8 DeviceControl; + UINT32 Count; + UINTN PageCount; + VOID *Map; + VOID *MemPage; + EFI_PHYSICAL_ADDRESS DeviceAddress; + + // + // Channel and device differential. Select device. // Device = (UINT8) ((IdeDev->Device << 4) | 0xe0); @@ -2333,13 +2158,13 @@ DoAtaUdma ( RemainBlockNum = NumberOfBlocks; while (RemainBlockNum > 0) { - if (RemainBlockNum >= MaxDmaCommandSectors) { + if (RemainBlockNum >= MAX_DMA_EXT_COMMAND_SECTORS) { // // SectorCount is used to record the number of sectors to be read // Max 65536 sectors can be transfered at a time. // - NumberOfBlocks = MaxDmaCommandSectors; - RemainBlockNum -= MaxDmaCommandSectors; + NumberOfBlocks = MAX_DMA_EXT_COMMAND_SECTORS; + RemainBlockNum -= MAX_DMA_EXT_COMMAND_SECTORS; } else { NumberOfBlocks = (UINT16) RemainBlockNum; RemainBlockNum = 0; @@ -2357,19 +2182,20 @@ DoAtaUdma ( // PageCount = EFI_SIZE_TO_PAGES (2 * PrdTableNum * sizeof (IDE_DMA_PRD)); Status = IdeDev->PciIo->AllocateBuffer ( - IdeDev->PciIo, - AllocateAnyPages, - EfiBootServicesData, - PageCount, - &MemPage, - 0 - ); + IdeDev->PciIo, + AllocateAnyPages, + EfiBootServicesData, + PageCount, + &MemPage, + 0 + ); if (EFI_ERROR (Status)) { return EFI_OUT_OF_RESOURCES; } ZeroMem ((VOID *) ((UINTN) MemPage), EFI_PAGES_TO_SIZE (PageCount)); - + PrdAddr = (IDE_DMA_PRD *) ((UINTN) MemPage); + // // To make sure PRD is allocated in one 64K page // @@ -2387,17 +2213,17 @@ DoAtaUdma ( // Build the PRD table // Status = IdeDev->PciIo->Map ( - IdeDev->PciIo, - PciIoProtocolOp, - DataBuffer, - &ByteCount, + IdeDev->PciIo, + EfiPciIoOperationBusMasterWrite, + DataBuffer, + &ByteCount, &DeviceAddress, &Map ); if (EFI_ERROR (Status)) { IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); return EFI_OUT_OF_RESOURCES; - } + } PrdBuffer = (VOID *) ((UINTN) DeviceAddress); TempPrdAddr = UsedPrdAddr; while (TRUE) { @@ -2443,11 +2269,7 @@ DoAtaUdma ( &RegisterValue ); - if (UdmaOp == AtaUdmaReadExtOp || UdmaOp == AtaUdmaReadOp) { - RegisterValue |= BMIC_nREAD; - } else { - RegisterValue &= ~((UINT8) BMIC_nREAD); - } + RegisterValue |= BMIC_nREAD; IdeDev->PciIo->Io.Write ( IdeDev->PciIo, @@ -2470,7 +2292,7 @@ DoAtaUdma ( &RegisterValue ); - RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR); + RegisterValue |= BMIS_INTERRUPT | BMIS_ERROR; IdeDev->PciIo->Io.Write ( IdeDev->PciIo, @@ -2481,26 +2303,17 @@ DoAtaUdma ( &RegisterValue ); - if (UdmaOp == AtaUdmaWriteExtOp || UdmaOp == AtaUdmaReadExtOp) { - Status = AtaCommandIssueExt ( - IdeDev, - AtaCommand, - Device, - 0, - (UINT16) NumberOfBlocks, - StartLba - ); - } else { - Status = AtaCommandIssue ( - IdeDev, - AtaCommand, - Device, - 0, - (UINT16) NumberOfBlocks, - StartLba - ); - } - + // + // Issue READ DMA EXT command + // + Status = AtaCommandIssueExt ( + IdeDev, + READ_DMA_EXT_CMD, + Device, + 0, + (UINT16) NumberOfBlocks, + StartLba + ); if (EFI_ERROR (Status)) { IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); @@ -2628,3 +2441,1097 @@ DoAtaUdma ( return EFI_SUCCESS; } + +/** + This function is called by the AtaBlkIoReadBlocks() to perform + reading from media in block unit. The function has been enhanced to + support >120GB access and transfer at most 65536 blocks per command + + @param[in] *IdeDev + pointer pointing to IDE_BLK_IO_DEV data structure, used + to record all the information of the IDE device. + + @param[in] *DataBuffer A pointer to the destination buffer for the data. + @param[in] StartLba The starting logical block address to read from + on the device media. + @param[in] NumberOfBlocks The number of transfer data blocks. + + @return The device status of UDMA operation. If the operation is + successful, return EFI_SUCCESS. + + TODO: EFI_UNSUPPORTED - add return value to function comment + TODO: EFI_DEVICE_ERROR - add return value to function comment + TODO: EFI_DEVICE_ERROR - add return value to function comment + TODO: EFI_DEVICE_ERROR - add return value to function comment +**/ +EFI_STATUS +AtaUdmaRead ( + IN IDE_BLK_IO_DEV *IdeDev, + IN VOID *DataBuffer, + IN EFI_LBA StartLba, + IN UINTN NumberOfBlocks + ) +{ + IDE_DMA_PRD *PrdAddr; + IDE_DMA_PRD *UsedPrdAddr; + IDE_DMA_PRD *TempPrdAddr; + UINT8 RegisterValue; + UINT8 Device; + UINT64 IoPortForBmic; + UINT64 IoPortForBmis; + UINT64 IoPortForBmid; + EFI_STATUS Status; + UINTN PrdTableNum; + UINTN ByteCount; + UINTN ByteAvailable; + UINT8 *PrdBuffer; + UINTN RemainBlockNum; + UINT8 DeviceControl; + UINT32 Count; + UINTN PageCount; + VOID *Map; + VOID *MemPage; + EFI_PHYSICAL_ADDRESS DeviceAddress; + + // + // Channel and device differential + // + Device = (UINT8) ((IdeDev->Device << 4) | 0xe0); + + // + // Enable interrupt to support UDMA and Select device + // + DeviceControl = 0; + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl); + + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device); + + if (IdePrimary == IdeDev->Channel) { + IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICP_OFFSET; + IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISP_OFFSET; + IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDP_OFFSET; + } else { + if (IdeSecondary == IdeDev->Channel) { + IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICS_OFFSET; + IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISS_OFFSET; + IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDS_OFFSET; + } else { + return EFI_UNSUPPORTED; + } + } + + RemainBlockNum = NumberOfBlocks; + while (RemainBlockNum > 0) { + + if (RemainBlockNum >= MAX_DMA_COMMAND_SECTORS) { + // + // SectorCount is used to record the number of sectors to be read + // Max 256 sectors can be transfered at a time. + // + NumberOfBlocks = MAX_DMA_COMMAND_SECTORS; + RemainBlockNum -= MAX_DMA_COMMAND_SECTORS; + } else { + NumberOfBlocks = (UINT16) RemainBlockNum; + RemainBlockNum = 0; + } + + // + // Calculate the number of PRD table to make sure the memory region + // not cross 64K boundary + // + ByteCount = NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize; + PrdTableNum = ((ByteCount >> 16) + 1) + 1; + + // + // Build PRD table + // + PageCount = EFI_SIZE_TO_PAGES (2 * PrdTableNum * sizeof (IDE_DMA_PRD)); + Status = IdeDev->PciIo->AllocateBuffer ( + IdeDev->PciIo, + AllocateAnyPages, + EfiBootServicesData, + PageCount, + &MemPage, + 0 + ); + if (EFI_ERROR (Status)) { + return EFI_OUT_OF_RESOURCES; + } + ZeroMem ((VOID *) ((UINTN) MemPage), EFI_PAGES_TO_SIZE (PageCount)); + + PrdAddr = (IDE_DMA_PRD *) ((UINTN) MemPage); + // + // To make sure PRD is allocated in one 64K page + // + if (((UINTN) PrdAddr & 0x0FFFF) > (((UINTN) PrdAddr + PrdTableNum * sizeof (IDE_DMA_PRD) - 1) & 0x0FFFF)) { + UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x10000) & 0xFFFF0000); + } else { + if ((UINTN) PrdAddr & 0x03) { + UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x04) & 0xFFFFFFFC); + } else { + UsedPrdAddr = PrdAddr; + } + } + + // + // Build the PRD table + // + Status = IdeDev->PciIo->Map ( + IdeDev->PciIo, + EfiPciIoOperationBusMasterWrite, + DataBuffer, + &ByteCount, + &DeviceAddress, + &Map + ); + if (EFI_ERROR (Status)) { + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + return EFI_OUT_OF_RESOURCES; + } + PrdBuffer = (UINT8 *) ((UINTN) DeviceAddress); + TempPrdAddr = UsedPrdAddr; + while (TRUE) { + + ByteAvailable = 0x10000 - ((UINTN) PrdBuffer & 0xFFFF); + + if (ByteCount <= ByteAvailable) { + TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer); + TempPrdAddr->ByteCount = (UINT16) ByteCount; + TempPrdAddr->EndOfTable = 0x8000; + break; + } + + TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer); + TempPrdAddr->ByteCount = (UINT16) ByteAvailable; + + ByteCount -= ByteAvailable; + PrdBuffer += ByteAvailable; + TempPrdAddr++; + } + + // + // Set the base address to BMID register + // + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint32, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmid, + 1, + &UsedPrdAddr + ); + + // + // Set BMIC register to identify the operation direction + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue |= BMIC_nREAD; + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + // + // Read BMIS register and clear ERROR and INTR bit + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + + RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + + // + // Issue READ DMA command + // + Status = AtaCommandIssue ( + IdeDev, + READ_DMA_CMD, + Device, + 0, + (UINT16) NumberOfBlocks, + StartLba + ); + if (EFI_ERROR (Status)) { + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + return EFI_DEVICE_ERROR; + } + + // + // Set START bit of BMIC register + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue |= BMIC_START; + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + // + // Check the INTERRUPT and ERROR bit of BMIS + // Max transfer number of sectors for one command is 65536(32Mbyte), + // it will cost 1 second to transfer these data in UDMA mode 2(33.3MBps). + // So set the variable Count to 2000, for about 2 second timeout time. + // + Count = 2000; + while (TRUE) { + + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + if ((RegisterValue & (BMIS_INTERRUPT | BMIS_ERROR)) || (Count == 0)) { + if ((RegisterValue & BMIS_ERROR) || (Count == 0)) { + // + // Clear START bit of BMIC register before return EFI_DEVICE_ERROR + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue &= ~((UINT8)BMIC_START); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + return EFI_DEVICE_ERROR; + } + break; + } + + gBS->Stall (1000); + Count --; + } + + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + // + // Read Status Register of IDE device to clear interrupt + // + RegisterValue = IDEReadPortB(IdeDev->PciIo,IdeDev->IoPort->Reg.Status); + // + // Clear START bit of BMIC register + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue &= ~((UINT8) BMIC_START); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + if (RegisterValue & BMIS_ERROR) { + return EFI_DEVICE_ERROR; + } + + DataBuffer = (UINT8 *) DataBuffer + NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize; + StartLba += NumberOfBlocks; + } + + // + // Disable interrupt of Select device + // + IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl); + DeviceControl |= IEN_L; + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl); + + return EFI_SUCCESS; +} + +/** + This function is called by the AtaBlkIoWriteBlocks() to perform + writing to media in block unit. The function has been enhanced to + support >120GB access and transfer at most 65536 blocks per command + + @param[in] *IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used + to record all the information of the IDE device. + + @param[in] *DataBuffer A pointer to the source buffer for the data. + + @param[in] StartLba The starting logical block address to write to + on the device media. + + @param[in] NumberOfBlocks The number of transfer data blocks. + + @return The device status of UDMA operation. If the operation is + successful, return EFI_SUCCESS. + + TODO: EFI_UNSUPPORTED - add return value to function comment + TODO: EFI_DEVICE_ERROR - add return value to function comment + TODO: EFI_DEVICE_ERROR - add return value to function comment +**/ +EFI_STATUS +AtaUdmaWriteExt ( + IN IDE_BLK_IO_DEV *IdeDev, + IN VOID *DataBuffer, + IN EFI_LBA StartLba, + IN UINTN NumberOfBlocks + ) +{ + IDE_DMA_PRD *PrdAddr; + IDE_DMA_PRD *UsedPrdAddr; + IDE_DMA_PRD *TempPrdAddr; + UINT8 RegisterValue; + UINT8 Device; + UINT64 IoPortForBmic; + UINT64 IoPortForBmis; + UINT64 IoPortForBmid; + EFI_STATUS Status; + UINTN PrdTableNum; + UINTN ByteCount; + UINTN ByteAvailable; + UINT8 *PrdBuffer; + UINTN RemainBlockNum; + UINT8 DeviceControl; + UINT32 Count; + UINTN PageCount; + VOID *Map; + VOID *MemPage; + EFI_PHYSICAL_ADDRESS DeviceAddress; + + // + // Channel and device differential + // + Device = (UINT8) ((IdeDev->Device << 4) | 0xe0); + + // + // Enable interrupt to support UDMA and Select device + // + DeviceControl = 0; + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl); + + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device); + + if (IdePrimary == IdeDev->Channel) { + IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICP_OFFSET; + IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISP_OFFSET; + IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDP_OFFSET; + } else { + if (IdeSecondary == IdeDev->Channel) { + IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICS_OFFSET; + IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISS_OFFSET; + IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDS_OFFSET; + } else { + return EFI_UNSUPPORTED; + } + } + + RemainBlockNum = NumberOfBlocks; + while (RemainBlockNum > 0) { + + if (RemainBlockNum >= MAX_DMA_EXT_COMMAND_SECTORS) { + // + // SectorCount is used to record the number of sectors to be read + // Max 65536 sectors can be transfered at a time. + // + NumberOfBlocks = MAX_DMA_EXT_COMMAND_SECTORS; + RemainBlockNum -= MAX_DMA_EXT_COMMAND_SECTORS; + } else { + NumberOfBlocks = (UINT16) RemainBlockNum; + RemainBlockNum = 0; + } + + // + // Calculate the number of PRD table to make sure the memory region + // not cross 64K boundary + // + ByteCount = NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize; + PrdTableNum = ((ByteCount >> 16) + 1) + 1; + + // + // Build PRD table + // + PageCount = EFI_SIZE_TO_PAGES (2 * PrdTableNum * sizeof (IDE_DMA_PRD)); + Status = IdeDev->PciIo->AllocateBuffer ( + IdeDev->PciIo, + AllocateAnyPages, + EfiBootServicesData, + PageCount, + &MemPage, + 0 + ); + if (EFI_ERROR (Status)) { + return EFI_OUT_OF_RESOURCES; + } + ZeroMem ((VOID *) ((UINTN) MemPage), EFI_PAGES_TO_SIZE (PageCount)); + + PrdAddr = (IDE_DMA_PRD *) ((UINTN) MemPage); + // + // To make sure PRD is allocated in one 64K page + // + if (((UINTN) PrdAddr & 0x0FFFF) > (((UINTN) PrdAddr + PrdTableNum * sizeof (IDE_DMA_PRD) - 1) & 0x0FFFF)) { + UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x10000) & 0xFFFF0000); + } else { + if ((UINTN) PrdAddr & 0x03) { + UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x04) & 0xFFFFFFFC); + } else { + UsedPrdAddr = PrdAddr; + } + } + + // + // Build the PRD table + // + Status = IdeDev->PciIo->Map ( + IdeDev->PciIo, + EfiPciIoOperationBusMasterRead, + DataBuffer, + &ByteCount, + &DeviceAddress, + &Map + ); + if (EFI_ERROR (Status)) { + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + return EFI_OUT_OF_RESOURCES; + } + PrdBuffer = (UINT8 *) ((UINTN) DeviceAddress); + TempPrdAddr = UsedPrdAddr; + while (TRUE) { + + ByteAvailable = 0x10000 - ((UINTN) PrdBuffer & 0xFFFF); + + if (ByteCount <= ByteAvailable) { + TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer); + TempPrdAddr->ByteCount = (UINT16) ByteCount; + TempPrdAddr->EndOfTable = 0x8000; + break; + } + + TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer); + TempPrdAddr->ByteCount = (UINT16) ByteAvailable; + + ByteCount -= ByteAvailable; + PrdBuffer += ByteAvailable; + TempPrdAddr++; + } + + // + // Set the base address to BMID register + // + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint32, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmid, + 1, + &UsedPrdAddr + ); + + // + // Set BMIC register to identify the operation direction + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + // + // 0000 1000 + // + RegisterValue &= ~((UINT8) BMIC_nREAD); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + // + // Read BMIS register and clear ERROR and INTR bit + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + + RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + + // + // Issue WRITE DMA EXT command + // + Status = AtaCommandIssueExt ( + IdeDev, + WRITE_DMA_EXT_CMD, + Device, + 0, + (UINT16) NumberOfBlocks, + StartLba + ); + if (EFI_ERROR (Status)) { + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + return EFI_DEVICE_ERROR; + } + + // + // Set START bit of BMIC register + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue |= BMIC_START; + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + // + // Check the INTERRUPT and ERROR bit of BMIS + // Max transfer number of sectors for one command is 65536(32Mbyte), + // it will cost 1 second to transfer these data in UDMA mode 2(33.3MBps). + // So set the variable Count to 2000, for about 2 second timeout time. + // + Count = 2000; + while (TRUE) { + + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + if ((RegisterValue & (BMIS_INTERRUPT | BMIS_ERROR)) || (Count == 0)) { + if ((RegisterValue & BMIS_ERROR) || (Count == 0)) { + // + // Clear START bit of BMIC register before return EFI_DEVICE_ERROR + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue &= ~((UINT8)BMIC_START); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + return EFI_DEVICE_ERROR; + } + break; + } + + gBS->Stall (1000); + Count --; + } + + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + // + // Read Status Register of IDE device to clear interrupt + // + RegisterValue = IDEReadPortB(IdeDev->PciIo,IdeDev->IoPort->Reg.Status); + // + // Clear START bit of BMIC register + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue &= ~((UINT8) BMIC_START); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + DataBuffer = (UINT8 *) DataBuffer + NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize; + StartLba += NumberOfBlocks; + } + + // + // Disable interrupt of Select device + // + IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl); + DeviceControl |= IEN_L; + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl); + + return EFI_SUCCESS; +} + +/** + This function is called by the AtaBlkIoWriteBlocks() to perform + writing to media in block unit. The function has been enhanced to + support >120GB access and transfer at most 65536 blocks per command + + @param[in] *IdeDev + pointer pointing to IDE_BLK_IO_DEV data structure, used + to record all the information of the IDE device. + + @param[in] *DataBuffer + A pointer to the source buffer for the data. + + @param[in] StartLba + The starting logical block address to write to + on the device media. + + @param[in] NumberOfBlocks + The number of transfer data blocks. + + @return The device status of UDMA operation. If the operation is + successful, return EFI_SUCCESS. + + TODO: EFI_UNSUPPORTED - add return value to function comment + TODO: EFI_DEVICE_ERROR - add return value to function comment + TODO: EFI_DEVICE_ERROR - add return value to function comment +**/ +EFI_STATUS +AtaUdmaWrite ( + IN IDE_BLK_IO_DEV *IdeDev, + IN VOID *DataBuffer, + IN EFI_LBA StartLba, + IN UINTN NumberOfBlocks + ) +{ + IDE_DMA_PRD *PrdAddr; + IDE_DMA_PRD *UsedPrdAddr; + IDE_DMA_PRD *TempPrdAddr; + UINT8 RegisterValue; + UINT8 Device; + UINT64 IoPortForBmic; + UINT64 IoPortForBmis; + UINT64 IoPortForBmid; + EFI_STATUS Status; + UINTN PrdTableNum; + UINTN ByteCount; + UINTN ByteAvailable; + UINT8 *PrdBuffer; + UINTN RemainBlockNum; + UINT8 DeviceControl; + UINT32 Count; + UINTN PageCount; + VOID *Map; + VOID *MemPage; + EFI_PHYSICAL_ADDRESS DeviceAddress; + + // + // Channel and device differential + // + Device = (UINT8) ((IdeDev->Device << 4) | 0xe0); + + // + // Enable interrupt to support UDMA + // + DeviceControl = 0; + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl); + + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device); + + if (IdePrimary == IdeDev->Channel) { + IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICP_OFFSET; + IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISP_OFFSET; + IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDP_OFFSET; + } else { + if (IdeSecondary == IdeDev->Channel) { + IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICS_OFFSET; + IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISS_OFFSET; + IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDS_OFFSET; + } else { + return EFI_UNSUPPORTED; + } + } + + RemainBlockNum = NumberOfBlocks; + while (RemainBlockNum > 0) { + + if (RemainBlockNum >= MAX_DMA_COMMAND_SECTORS) { + // + // SectorCount is used to record the number of sectors to be read + // Max 256 sectors can be transfered at a time. + // + NumberOfBlocks = MAX_DMA_COMMAND_SECTORS; + RemainBlockNum -= MAX_DMA_COMMAND_SECTORS; + } else { + NumberOfBlocks = (UINT16) RemainBlockNum; + RemainBlockNum = 0; + } + + // + // Calculate the number of PRD table to make sure the memory region + // not cross 64K boundary + // + ByteCount = NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize; + PrdTableNum = ((ByteCount >> 16) + 1) + 1; + + // + // Build PRD table + // + PageCount = EFI_SIZE_TO_PAGES (2 * PrdTableNum * sizeof (IDE_DMA_PRD)); + Status = IdeDev->PciIo->AllocateBuffer ( + IdeDev->PciIo, + AllocateAnyPages, + EfiBootServicesData, + PageCount, + &MemPage, + 0 + ); + if (EFI_ERROR (Status)) { + return EFI_OUT_OF_RESOURCES; + } + ZeroMem ((VOID *) ((UINTN) MemPage), EFI_PAGES_TO_SIZE (PageCount)); + + PrdAddr = (IDE_DMA_PRD *) ((UINTN) MemPage); + + // + // To make sure PRD is allocated in one 64K page + // + if (((UINTN) PrdAddr & 0x0FFFF) > (((UINTN) PrdAddr + PrdTableNum * sizeof (IDE_DMA_PRD) - 1) & 0x0FFFF)) { + UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x10000) & 0xFFFF0000); + } else { + if ((UINTN) PrdAddr & 0x03) { + UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x04) & 0xFFFFFFFC); + } else { + UsedPrdAddr = PrdAddr; + } + } + + // + // Build the PRD table + // + Status = IdeDev->PciIo->Map ( + IdeDev->PciIo, + EfiPciIoOperationBusMasterRead, + DataBuffer, + &ByteCount, + &DeviceAddress, + &Map + ); + if (EFI_ERROR (Status)) { + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + return EFI_OUT_OF_RESOURCES; + } + PrdBuffer = (UINT8 *) ((UINTN) DeviceAddress); + TempPrdAddr = UsedPrdAddr; + while (TRUE) { + + ByteAvailable = 0x10000 - ((UINTN) PrdBuffer & 0xFFFF); + + if (ByteCount <= ByteAvailable) { + TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer); + TempPrdAddr->ByteCount = (UINT16) ByteCount; + TempPrdAddr->EndOfTable = 0x8000; + break; + } + + TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer); + TempPrdAddr->ByteCount = (UINT16) ByteAvailable; + + ByteCount -= ByteAvailable; + PrdBuffer += ByteAvailable; + TempPrdAddr++; + } + + // + // Set the base address to BMID register + // + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint32, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmid, + 1, + &UsedPrdAddr + ); + + // + // Set BMIC register to identify the operation direction + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + // + // 0000 1000 + // + RegisterValue &= ~((UINT8) BMIC_nREAD); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + // + // Read BMIS register and clear ERROR and INTR bit + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + + RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + + // + // Issue WRITE DMA command + // + Status = AtaCommandIssue ( + IdeDev, + WRITE_DMA_CMD, + Device, + 0, + (UINT16) NumberOfBlocks, + StartLba + ); + if (EFI_ERROR (Status)) { + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + return EFI_DEVICE_ERROR; + } + + // + // Set START bit of BMIC register + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue |= BMIC_START; + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + // + // Check the INTERRUPT and ERROR bit of BMIS + // Max transfer number of sectors for one command is 65536(32Mbyte), + // it will cost 1 second to transfer these data in UDMA mode 2(33.3MBps). + // So set the variable Count to 2000, for about 2 second timeout time. + // + Count = 2000; + while (TRUE) { + + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmis, + 1, + &RegisterValue + ); + if ((RegisterValue & (BMIS_INTERRUPT | BMIS_ERROR)) || (Count == 0)) { + if ((RegisterValue & BMIS_ERROR) || (Count == 0)) { + // + // Clear START bit of BMIC register before return EFI_DEVICE_ERROR + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue &= ~((UINT8)BMIC_START); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + return EFI_DEVICE_ERROR; + } + break; + } + + gBS->Stall (1000); + Count --; + } + + IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage); + IdeDev->PciIo->Unmap (IdeDev->PciIo, Map); + + // + // Read Status Register of IDE device to clear interrupt + // + RegisterValue = IDEReadPortB(IdeDev->PciIo,IdeDev->IoPort->Reg.Status); + // + // Clear START bit of BMIC register + // + IdeDev->PciIo->Io.Read ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + RegisterValue &= ~((UINT8) BMIC_START); + + IdeDev->PciIo->Io.Write ( + IdeDev->PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + IoPortForBmic, + 1, + &RegisterValue + ); + + DataBuffer = (UINT8 *) DataBuffer + NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize; + StartLba += NumberOfBlocks; + } + + // + // Disable interrupt of Select device + // + IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl); + DeviceControl |= IEN_L; + IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl); + + return EFI_SUCCESS; +} diff --git a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/ide.h b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/ide.h index f382279..b83a82a 100644 --- a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/ide.h +++ b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/ide.h @@ -1098,42 +1098,6 @@ AtaUdmaWriteExt ( ; /** - Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt). - - @param[in] *IdeDev - pointer pointing to IDE_BLK_IO_DEV data structure, used - to record all the information of the IDE device. - - @param[in] *DataBuffer - A pointer to the source buffer for the data. - - @param[in] StartLba - The starting logical block address to write to - on the device media. - - @param[in] NumberOfBlocks - The number of transfer data blocks. - - @param[in] UdmaOp - The perform operations could be AtaUdmaReadOp, AtaUdmaReadExOp, - AtaUdmaWriteOp, AtaUdmaWriteExOp - - @return The device status of UDMA operation. If the operation is - successful, return EFI_SUCCESS. - -**/ -EFI_STATUS -DoAtaUdma ( - IN IDE_BLK_IO_DEV *IdeDev, - IN VOID *DataBuffer, - IN EFI_LBA StartLba, - IN UINTN NumberOfBlocks, - IN ATA_UDMA_OPERATION UdmaOp - ) -; - - -/** TODO: Add function description @param IdeDev TODO: add argument description diff --git a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c index 73b302c..0e7d43e 100644 --- a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c +++ b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.c @@ -629,11 +629,7 @@ IDEBusDriverBindingStart ( IdeBlkIoDevicePtr = NULL; continue; } - // - // Record Udma Mode - // - IdeBlkIoDevicePtr->UdmaMode.Valid = TRUE; - IdeBlkIoDevicePtr->UdmaMode.Mode = SupportedModes->UdmaMode.Mode; + EnableInterrupt (IdeBlkIoDevicePtr); } else if (SupportedModes->MultiWordDmaMode.Valid) { diff --git a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.h b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.h index 78c79d7..52c1f26 100644 --- a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.h +++ b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idebus.h @@ -65,7 +65,7 @@ typedef struct { INQUIRY_DATA *pInquiryData; EFI_IDENTIFY_DATA *pIdData; ATA_PIO_MODE PioMode; - EFI_ATA_MODE UdmaMode; + ATA_UDMA_MODE UDma_Mode; CHAR8 ModelName[41]; REQUEST_SENSE_DATA *SenseData; UINT8 SenseDataNumber; diff --git a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idedata.h b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idedata.h index 0c38311..ec088dc 100644 --- a/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idedata.h +++ b/EdkModulePkg/Bus/Pci/IdeBus/Dxe/idedata.h @@ -86,13 +86,6 @@ typedef enum { SenseOtherSense } SENSE_RESULT; -typedef enum { - AtaUdmaReadOp, - AtaUdmaReadExtOp, - AtaUdmaWriteOp, - AtaUdmaWriteExtOp -} ATA_UDMA_OPERATION; - // // IDE Registers // -- cgit v1.1