Age | Commit message (Collapse) | Author | Files | Lines |
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3324
The SEV-ES stacks currently share a page with the reset code and data.
Separate the SEV-ES stacks from the reset vector code and data to avoid
possible stack overflows from overwriting the code and/or data.
When SEV-ES is enabled, invoke the GetWakeupBuffer() routine a second time
to allocate a new area, below the reset vector and data.
Both the PEI and DXE versions of GetWakeupBuffer() are changed so that
when PcdSevEsIsEnabled is true, they will track the previous reset buffer
allocation in order to ensure that the new buffer allocation is below the
previous allocation. When PcdSevEsIsEnabled is false, the original logic
is followed.
Fixes: 7b7508ad784d16a5208c8d12dff43aef6df0835b
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <3cae2ac836884b131725866264e0a0e1897052de.1621024125.git.thomas.lendacky@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
5-level paging can be enabled on CPU which supports up to 52 physical
address size. But when the feature was enabled, the 48 address size
limit was not removed and the 5-level paging testing didn't access
address >= 2^48. So the issue wasn't detected until recently an
address >= 2^48 is accessed.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3373
An update to expand the mExceptionNameStr array failed to add a comma
after original last entry, therefore causing the #CP name to have extra
incorrect characters and the remaining entries to be indexed incorrectly
(off by 1).
Add a comma after the "#CP" entry to resolve this issue.
Fixes: 5277540e37e88a1a69f9517c4ad895051b4b3ed3
Cc: Allen Wynn <Allen_Wynn@Dell.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <40e55bf6563ed8ea4962a1219efbe1ab77a56cc4.1620919615.git.thomas.lendacky@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3385
A VS2012 build fails with a cast conversion warning when the SEV-ES work
area PCD is cast as a pointer to the SEV_ES_AP_JMP_FAR type.
When casting from a PCD value to a pointer, the cast should first be done
to a UINTN and then to the pointer. Update the code to perform a cast to
a UINTN before casting to a pointer to the SEV_ES_AP_JMP_FAR type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Fixes: 7b7508ad784d16a5208c8d12dff43aef6df0835b
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c89bc819856d448360430c32cb3833a9667f987b.1620656694.git.thomas.lendacky@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3300
Current implementation of SetStaticPageTable routine in PiSmmCpuDxeSmm
driver will check a global variable mPhysicalAddressBits, and eventually
cap any value larger than 39 at 39.
This global variable is used in ConvertMemoryPageAttributes, which backs
SmmSetMemoryAttributes and SmmClearMemoryAttributes. Thus for a processor
that supports more than 39 bits width, trying to mark page table regions
higher than 39-bit will always return EFI_UNSUPPROTED.
This change updated the interface of SetStaticPageTable function to take
PhysicalAddressBits as an input parameter, in order to avoid changing/
accessing the global variable.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Fixes: 4eee0cc7cc0db74489b99c19eba056b53eda6358
Signed-off-by: Kun Qin <kuqin12@gmail.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3283
Current SMM Save State routine does not check the number of bytes to be
read, when it comse to read IO_INFO, before casting the incoming buffer
to EFI_SMM_SAVE_STATE_IO_INFO. This could potentially cause memory
corruption due to extra bytes are written out of buffer boundary.
This change adds a width check before copying IoInfo into output buffer.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210406195254.1018-2-kuqin12@gmail.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2832
Update LIBRARY_CLASS of BaseCpuTimerLib to remove the usage limitation,
otherwise the Base instance cannot be used in some types of modules.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
Use SMM stack guard feature to detect SMM shadow stack overflow.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3280
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roger Feng <roger.feng@intel.com>
|
|
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3303
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2832
1. Remove PEI instance(PeiCpuTimerLib).
PeiCpuTimerLib is currently designed to save time by getting CPU TSC
frequency from Hob. BaseCpuTimerLib is designed to calculate TSC frequency
by using CPUID[15h] each time.
The time it takes to find CpuCrystalFrequencyHob (about 2000ns) is much
longer than it takes to calculate TSC frequency with CPUID[15h] (about
450ns), which means using BaseCpuTimerLib to trigger a delay is more
accurate than using PeiCpuTimerLib, recommend to use BaseCpuTimerLib
instead of PeiCpuTimerLib.
2. Remove DXE instance(DxeCpuTimerLib).
DxeCpuTimerLib is designed to calculate TSC frequency with CPUID[15h] in
its constructor function, then save it in a global variable. For this
design, once the driver containing this instance is running, this
constructor function is called, it will take extra time to calculate TSC
frequency.
The time it takes to get TSC frequency from global variable is shorter
than it takes to calculate TSC frequency with CPUID[15h], but 450ns is a
short time, the impact on the platform is very limited.
In addition, in order to simplify the code, recommend to use
BaseCpuTimerLib instead of DxeCpuTimerLib.
I did some experiments on one server platform and collected following data:
1. Average time required to find CpuCrystalFrequencyHob: about 2000 ns.
2. Average time required to find the last Hob: about 2700 ns.
2. Average time required to calculate TSC frequency: about 450 ns.
Reference code:
//
// Calculate average time required to find Hob.
//
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] GetPerformanceCounterFrequency - GetFirstGuidHob (1000 cycles)\n"));
Ticks1 = AsmReadTsc();
for (i = 0; i < 1000; i++) {
GuidHob = GetFirstGuidHob (&mCpuCrystalFrequencyHobGuid);
}
Ticks2 = AsmReadTsc();
if (GuidHob == NULL) {
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] - CpuCrystalFrequencyHob can not be found!\n"));
} else {
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] - Average time required to find Hob = %d ns\n", \
DivU64x32(DivU64x64Remainder(MultU64x32((Ticks2 - Ticks1), 1000000000), *CpuCrystalCounterFrequency, NULL), 1000)));
}
//
// Calculate average time required to calculate CPU frequency.
//
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] GetPerformanceCounterFrequency - CpuidCoreClockCalculateTscFrequency (1000 cycles)\n"));
Ticks1 = AsmReadTsc();
for (i = 0; i < 1000; i++) {
Freq = CpuidCoreClockCalculateTscFrequency ();
}
Ticks2 = AsmReadTsc();
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] - Average time required to calculate TSC frequency = %d ns\n", \
DivU64x32(DivU64x64Remainder(MultU64x32((Ticks2 - Ticks1), 1000000000), *CpuCrystalCounterFrequency, NULL), 1000)));
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3246
MdeLibs.dsc.inc was added for some basic/default library
instances provided by MdePkg and RegisterFilterLibNull Library
was also added into it as the first version of MdeLibs.dsc.inc.
So update platform dsc to consume MdeLibs.dsc.inc for
RegisterFilterLibNull which will be consumed by IoLib and BaseLib.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The comments in PiSmmCommunicationPei.c describe the whole memory
layout of the SMRAM regarding the SMM communication.
But SHA-1: 8b1d14939053b63d80355465649c50f9f391a64a
PiSmmCommunicationSmm: Deprecate SMM Communication ACPI Table
removed the code that produces the ACPI Table.
This change updates the accordingly comments.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3233
GDT needs to be allocated below 4GB in 64bit environment
because AP needs it for entering to protected mode.
CPU running in big real mode cannot access above 4GB GDT.
But CpuDxe driver contains below code:
gdt = AllocateRuntimePool (sizeof (GdtTemplate) + 8);
.....
gdtPtr.Base = (UINT32)(UINTN)(VOID*) gdt;
The AllocateRuntimePool() may allocate memory above 4GB.
Thus, we cannot use AllocateRuntimePool (), instead,
we should use AllocatePages() to make sure GDT is below 4GB space.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
The change doesn't impact any functionality.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
MpInitLib contains a function MicrocodeDetect() which is called by
all threads as an AP procedure.
Today this function contains below code:
if (CurrentRevision != LatestRevision) {
AcquireSpinLock(&CpuMpData->MpLock);
DEBUG ((
EFI_D_ERROR,
"Updated microcode signature [0x%08x] does not match \
loaded microcode signature [0x%08x]\n",
CurrentRevision, LatestRevision
));
ReleaseSpinLock(&CpuMpData->MpLock);
}
When the if-check is passed, the code may call into PEI services:
1. AcquireSpinLock
When the PcdSpinTimeout is not 0, TimerLib
GetPerformanceCounterProperties() is called. And some of the
TimerLib implementations would get the information cached in
HOB. But AP procedure cannot call PEI services to retrieve the
HOB list.
2. DEBUG
Certain DebugLib relies on ReportStatusCode services and the
ReportStatusCode PPI is retrieved through the PEI services.
DebugLibSerialPort should be used.
But when SerialPortLib is implemented to depend on PEI services,
even using DebugLibSerialPort can still cause AP calls PEI
services resulting hang.
It causes a lot of debugging effort on the platform side.
There are 2 options to fix the problem:
1. make sure platform DSC chooses the proper DebugLib and set the
PcdSpinTimeout to 0. So that AcquireSpinLock and DEBUG don't call
PEI services.
2. remove the AcquireSpinLock and DEBUG call from the procedure.
Option #2 is preferred because it's not practical to ask every
platform DSC to be written properly.
Following option #2, there are two sub-options:
2.A. Just remove the if-check.
2.B. Capture the CurrentRevision and ExpectedRevision in the memory
for each AP and print them together from BSP.
The patch follows option 2.B.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3265
Support collecting cache associative type in CpuCacheInfoLib.
This prevents the user from using additional code to obtain the
same information.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3199
When Token points to mSmmStartupThisApToken, this routine is called
from SmmStartupThisAp() in non-blocking mode due to
PcdCpuSmmBlockStartupThisAp == FALSE.
In this case, caller wants to startup AP procedure in non-blocking
mode and cannot get the completion status from the Token because there
is no way to return the Token to caller from SmmStartupThisAp().
Caller needs to use its specific way to query the completion status.
There is no need to allocate a token for such case so the 3 overheads
can be avoided:
1. Call AllocateTokenBuffer() when there is no free token.
2. Get a free token from the token buffer.
3. Call ReleaseToken() in APHandler().
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3218
Adds an INF for StandaloneMmCpuFeaturesLib, which supports building
the SmmCpuFeaturesLib code for Standalone MM. Minimal code changes
are made to allow reuse of existing code for Standalone MM.
The original INF file names are left intact (continue to use SMM
terminology) to retain backward compatibility with platforms that
use those INFs. Similarly, the pre-existing C file names are
unchanged to be consistent with the INF file names.
Note that all references in library source files to PiSmm.h have
been changed to PiMm.h for consistency.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Message-Id: <20210217213227.1277-6-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3218
Adds a new function called GetCpuMaxLogicalProcessorNumber() to
return the number of maximum CPU logical processors (currently
gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber).
This allows the the mechanism used to retrieve the CPU maximum
logical processor number to be abstracted from the logic that
needs the value.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210217213227.1277-5-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
There's currently two library instances:
1. SmmCpuFeaturesLib
2. SmmCpuFeaturesLibStm
There's two constructor functions:
1. SmmCpuFeaturesLibConstructor()
2. SmmCpuFeaturesLibStmConstructor()
SmmCpuFeaturesLibConstructor() is called by
SmmCpuFeaturesLibStmConstructor() since the functionality in that
function is required by both library instances.
The declaration for SmmCpuFeaturesLibConstructor() is embedded in
"SmmStm.c" instead of being declared in a header file. Further,
that constructor function is called by the STM specific constructor.
This change moves the common code to a function called
CpuFeaturesLibInitialization() which is declared in an internal
library header file "CpuFeaturesLib.h". Each constructor simply
calls this function to perform the common functionality.
Additionally, SmmCpuFeaturesLibConstructor() is moved from
SmmCpuFeaturesLibNoStm.c into a instance-specific file allowing
SmmCpuFeaturesLibNoStm.c to contain no STM implementation agnostic
to a particular library instance.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210217213227.1277-4-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
This change renames SmmCpuFeaturesLib.c to SmmCpuFeaturesLibCommon.c
to better convey that this file contains library implementation
common to all library instances.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Message-Id: <20210217213227.1277-3-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
FinishSmmCpuFeaturesInitializeProcessor() is a multi-instance
internal library function that is currently not declared in a
header file but embedded in "SmmCpuFeaturesLib.c".
This change cleans up the declaration moving it to a new header
file "CpuFeaturesLib.h" and removing the local declaration in
"SmmCpuFeaturesLib.c".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210217213227.1277-2-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
[lersek@redhat.com: replace the guard macro "_CPU_FEATURES_LIB_H_" with
"CPU_FEATURES_LIB_H_", for fixing ECC 8003, per commit 6ffbb3581ab7]
|
|
The Lock is no longer needed since "LOCK XADD" was used in
MpFuncs.nasm for ApIndex atomic increment.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
In Windows environment, "dumpbin /disasm" is used to verify the
disassembly before and after using NASM struc doesn't change.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
In function InitGdt(), SmiPFHandler() and Gen4GPageTable(), it uses
CpuIndex * mSmmStackSize to get the SMM stack address offset for
multi processor. It misses the SMM Shadow Stack Size. Each processor
will use mSmmStackSize + mSmmShadowStackSize in the memory.
It should use CpuIndex * (mSmmStackSize + mSmmShadowStackSize) to get
this SMM stack address offset. If mSmmShadowStackSize > 0 and multi
processor enabled, it will get the wrong offset value.
CET shadow stack feature will set the value of mSmmShadowStackSize.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3237
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roger Feng <roger.feng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
If CET shadows stack feature enabled in SMM and stack switch is enabled.
When code execute from SMM handler to SMM exception, CPU will check SMM
exception shadow stack token busy bit if it is cleared or not.
If it is set, it will trigger #DF exception.
If it is not set, CPU will set the busy bit when enter SMM exception.
So, the busy bit should be cleared when return back form SMM exception to
SMM handler. Otherwise, keeping busy bit 1 will cause to trigger #DF
exception when enter SMM exception next time.
So, we use instruction SAVEPREVSSP, CLRSSBSY and RSTORSSP to clear the
shadow stack token busy bit before RETF instruction in SMM exception.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3192
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roger Feng <roger.feng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
When AP firstly wakes up, MpFuncs.nasm contains below logic to assign
an unique ApIndex to each AP according to who comes first:
---ASM---
TestLock:
xchg [edi], eax
cmp eax, NotVacantFlag
jz TestLock
mov ecx, esi
add ecx, ApIndexLocation
inc dword [ecx]
mov ebx, [ecx]
Releaselock:
mov eax, VacantFlag
xchg [edi], eax
---ASM END---
"lock inc" cannot be used to increase ApIndex because not only the
global ApIndex should be increased, but also the result should be
stored to a local general purpose register EBX.
This patch learns from the NASM implementation of
InternalSyncIncrement() to use "XADD" instruction which can increase
the global ApIndex and store the original ApIndex to EBX in one
instruction.
With this patch, OVMF when running in a 255 threads QEMU spends about
one second to wakeup all APs. Original implementation needs more than
10 seconds.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1614
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3160
The GDT still in flash with commit 60b12e69fb1c8c7180fdda92f008248b9ec83db1
after TempRamDone
So move the action to TempRamDone event to avoid reading GDT from flash.
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3195
Support system has no enabled AP case in DxeCpuCacheInfoLib.
Otherwise, if the system only has 1 BSP without any enabled AP,
UEFI POST hangs when invoking StartupAllAPs protocol because
EFI_NOT_STARTED is returned.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3190
Add MpService dependency to enforce the executability of CpuCacheInfoLib.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
This change of SmmCpuExceptionHandlerLib adds support for StandaloneMm
components to allow x64 StandaloneMm environment setting up exception
handlers.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
This change adds a new CpuIo driver instance for MM_STANDALONE type. The
new driver entrypoint is implemented in a separate file to match the
interface definition of MM_STANDALONE modules.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
This change abstracts CpuIo2Smm driver entrypoint into separate file and
moves functions/definitions that are not substantially specific to
Traditional MM (SMM) into CpuIo2Mm.* in order to set ways for Standalone
MM support in the future.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
This change replaced gSmst with gMmst to support broader compatibility
under MM environment for CpuIo2Smm driver.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3179
When BSP first time wakes all APs, each AP atomically increases
CpuMpData->CpuCount and CpuMpData->FinishedCount.
Each AP atomically increases CpuMpData->NumApsExecuting
in early assembly code and decreases it before it enters to HLT or
MWAIT state.
Putting them together, the 3 variables are changed in the following order:
1. NumApsExecuting++ // in assembly
2. CpuCpunt++
4. FinishedCount++
3. NumApsExecuting-- // in C
BSP waits for a certain timeout and then polls NumApsExecuting
until it drops to zero. It assumes all APs are waken up concurrently
and NumApsExecuting only drops to zero when all APs have checked in.
Then it additionally waits for FinishedCount == CpuCount - 1. (FinishedCount doesn't include BSP while CpuCount includes BSP.)
There is no need to additionally wait for
FinishedCount == CpuCount - 1 because when NumApsExecuting == 0,
the number of increament of FinishedCount and CpuCount should equal.
This patch simplifies the code to remove "CpuCount++" in
ApWakeupFunction() and
assigns FinishedCount + 1 to CpuCount after WakeUpAP().
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3105
Change and add some macro definitions about
CPUID_HYBRID_INFORMATION Leaf(1Ah).
Signed-off-by: Jason Lou <yun.lou@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3182
Fix the order of operations in ApWakeupFunction() when PcdCpuApLoopMode
is set to HLT mode that uses INIT-SIPI-SIPI to wake APs. In this mode,
volatile state is restored and saved each time a INIT-SIPI-SIPI is sent
to an AP to request a function to be executed on the AP. When the
function is completed the volatile state of the AP is saved. However,
the counters NumApsExecuting and FinishedCount are updated before
the volatile state is saved. This allows for a race condition window
for the BSP that is waiting on these counters to request a new
INIT-SIPI-SIPI before all the APs have completely saved their volatile
state. The fix is to save the AP volatile state before updating the
NumApsExecuting and FinishedCount counters.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3167
When StackGuard is enabled, the CpuMp driver allocates
known good stacks for all CPUs for DF# and PF# exceptions.
It uses AllocatePool to do so.
The size needed equals to 64KB
= StackSize (2K) * ExceptionNumber (2) * NumberOfProcessors (16)
However, AllocatePool max allocation size is less than 64K.
To fix the issue, AllocatePages() is used.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
NumberOfCpus local variable in GetAcpiCpuData will be uninitialized
when CpuS3DataDxe runs before DxeRegisterCpuFeaturesLib (linked by
CpuFeaturesDxe) because there is no code to initialize it at
(AcpiCpuData != NULL) execution path.
The issue is exposed after cefad282fb31aff3e1a6dcbd368cbbffc3fce900
and 38ee7bafa72f58982f99ac6f61eef160f80bad69.
There was negligence in that code review.
One further topic may be "Could EDK2 CI be enhanced to catch this kind
of uninitialized local variable case?". :)
This patch fixes this regression issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Message-Id: <20210121093944.1621-1-star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
CpuS3DataDxe allocates the "RegisterTable" and "PreSmmInitRegisterTable"
arrays in ACPI_CPU_DATA just so every processor in the system can have its
own empty register table, matched by APIC ID. This has never been useful
in practice.
Given commit e992cc3f4859 ("UefiCpuPkg PiSmmCpuDxeSmm: Reduce SMRAM
consumption in CpuS3.c", 2021-01-11), simply leave both
"AcpiCpuData->RegisterTable" and "AcpiCpuData->PreSmmInitRegisterTable"
initialized to the zero address. This simplifies the driver, and saves
both normal RAM (boot services data type memory) and -- in PiSmmCpuDxeSmm
-- SMRAM.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3159
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Message-Id: <20210119155440.2262-4-lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
After commit e992cc3f4859 ("UefiCpuPkg PiSmmCpuDxeSmm: Reduce SMRAM
consumption in CpuS3.c", 2021-01-11), it is valid for a CPU S3 Data DXE
Driver to set "ACPI_CPU_DATA.PreSmmInitRegisterTable" and/or
"ACPI_CPU_DATA.RegisterTable" to 0, in case none of the CPUs needs a
register table of the corresponding kind, during S3 resume.
Document this fact in the "UefiCpuPkg/Include/AcpiCpuData.h" header file.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3159
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210119155440.2262-3-lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
There are lots of fields in ACPI_CPU_DATA structure while only
followings are accessed by CpuFeature infra:
* NumberOfCpus
* PreSmmInitRegisterTable // pointer
* RegisterTable // pointer
* CpuStatus
* ApLocation // pointer
So it's possible that an implementation of CpuS3DataDxe doesn't
allocate memory for PreSmmInitRegisterTable/RegisterTable/ApLocation.
This patch handles the case when CpuS3DataDxe doesn't allocate
memory for PreSmmInitRegisterTable/RegisterTable.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3159
Signed-off-by: Ray Ni <ray.ni@intel.com>
[lersek@redhat.com: update CC list, add BZ reference, add my S-o-b]
[lersek@redhat.com: deal with RegisterTable and PreSmmInitRegisterTable
being zero independently of each other; replacing the ASSERT()]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210119155440.2262-2-lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3105
This new library uses a platform agnostic algorithm to get CPU
cache information. It provides user with an API(GetCpuCacheInfo)
to get detailed CPU cache information by each package, each core
type included in this package, and each cache level & type.
This library can be used by code that produces SMBIOS_TABLE_TYPE7
SMBIOS table.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3084
When DXE drivers are dispatched above 4GB memory in 64bit
mode, the address setCodeSelectorLongJump in stack will
be override by parameter. Jump to Qword is not supported
by some processors. So use "o64 retf" instead.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
This patch fixed the hang in UEFICpuPkg when it is dispatched above 4GB.
In UEFI BIOS case CpuInfoInHob is provided to DXE under 4GB from PEI.
When using UEFI payload and bootloaders, CpuInfoInHob will be allocated
above 4GB since it is not provided from bootloader. so we need update
the code to make sure this hob could be accessed correctly in this case.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
This patch makes two refinements to reduce SMRAM consumption in CpuS3.c.
1. Only do CopyRegisterTable() when register table is not empty,
IsRegisterTableEmpty() is created to check whether the register table
is empty or not.
Take empty PreSmmInitRegisterTable as example, about 24K SMRAM consumption
could be reduced when mAcpiCpuData.NumberOfCpus=1024.
sizeof (CPU_REGISTER_TABLE) = 24
mAcpiCpuData.NumberOfCpus = 1024 = 1K
mAcpiCpuData.NumberOfCpus * sizeof (CPU_REGISTER_TABLE) = 24K
2. Only copy table entries buffer instead of whole buffer.
AllocatedSize in SourceRegisterTableList is the whole buffer size.
Actually, only the table entries buffer needs to be copied, and the size
is TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY).
Take AllocatedSize=0x1000=4096, TableLength=100 and NumberOfCpus=1024 as example,
about 1696K SMRAM consumption could be reduced.
sizeof (CPU_REGISTER_TABLE_ENTRY) = 24
TableLength = 100
TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY) = 2400
AllocatedSize = 0x1000 = 4096
AllocatedSize - TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY) = 4096 - 2400 = 1696
NumberOfCpus = 1024 = 1K
NumberOfCpus * (AllocatedSize - TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY)) = 1696K
This patch also corrects the CopyRegisterTable() function description.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210111015419.28368-1-star.zeng@intel.com>
|
|
This reverts commit cee5b0441af39dd6f76cc4e0447a1c7f788cbb00.
Commit cee5b0441af3 ("UefiCpuPkg/CpuDxe: Fix boot error", 2020-12-08)
breaks CpuDxe (and with it, OVMF boot) on AMD processors. AMD processors
cannot do far jumps to 64-bit targets, as documented in the AMD64
Architecture Programmer's Manual.
Revert the patch until a RETFQ-based substitute is posted.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Ref: https://edk2.groups.io/g/devel/message/68597
Ref: https://www.redhat.com/archives/edk2-devel-archive/2020-December/msg00493.html
Reported-by: Thomas Lendacky <thomas.lendacky@amd.com>
Ref: https://edk2.groups.io/g/devel/message/68832
Ref: https://www.redhat.com/archives/edk2-devel-archive/2020-December/msg00737.html
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201217085055.15131-1-lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3121
[lersek@redhat.com: add BZ link]
|
|
CpuInfo.First stores whether the current thread belongs to the first
package in the platform, first core in a package, first thread in a
core.
But the time complexity of original algorithm to calculate the
CpuInfo.First is O (n) * O (p) * O (c).
n: number of processors
p: number of packages
c: number of cores per package
The patch trades time with space by storing the first package, first
core per package, first thread per core in an array.
The time complexity becomes O (n).
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Yun Lou <yun.lou@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
|
|
The required buffer size for InitOrder will be 96K when NumberOfCpus=1024.
sizeof (CPU_FEATURES_INIT_ORDER) = 96
NumberOfCpus = 1024 = 1K
sizeof (CPU_FEATURES_INIT_ORDER) * NumberOfCpus = 96K
AllocateZeroPool() will call to PeiServicesAllocatePool() which will use
EFI_HOB_MEMORY_POOL to management memory pool.
EFI_HOB_MEMORY_POOL.Header.HobLength is UINT16 type, so there is no way
for AllocateZeroPool() to allocate > 64K memory.
So AllocateZeroPool() could not be used anymore for the case above or
even bigger required buffer size.
This patch updates the code to use AllocatePages() instead of
AllocateZeroPool() to allocate buffer for InitOrder.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
|