Age | Commit message (Collapse) | Author | Files | Lines |
|
Rename SmmEndOfS3ResumeProtocolGuid to EndOfS3ResumeGuid as the GUID
may be used to install PPI in future to notify PEI phase code.
The references in UefiCpuPkg are also being updated.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
One of the functionalities of CpuDxe is to update memory paging attributes.
If page table protection is applied, it must be disabled temporarily before
any attributes update and enabled again afterwards.
This patch makes use of the same way as DxeIpl to allocate page table memory
from reserved memory pool, which helps to reduce potential "split" operation
and recursive calling of SetMemorySpaceAttributes().
Laszlo (lersek@redhat.com) did a regression test on QEMU virtual platform with
one middle version of this series patch. The details can be found at
https://lists.01.org/pipermail/edk2-devel/2017-December/018625.html
There're a few changes after his work.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
When printing the ascii format of memory attribute in debug message,
%s was used, but %a should be used.
The patch additionally changes %x to %r for EFI_STATUS.
The whole patch doesn't impact functionality of the MtrrLib.
Just debug message fix.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Ming Shao <ming.shao@intel.com>
|
|
In current MP implementation, BSP and AP shares the same exception
configuration. Stack switch required by Stack Guard feature needs that BSP
and AP have their own configuration. This patch adds code to ask BSP and AP
to do exception handler initialization separately.
Since AP is not supposed to do memory allocation, all memory needed to
setup stack switch will be reserved in BSP and pass to AP via new API
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitData OPTIONAL
);
Following two new PCDs are introduced to configure how to setup new stack
for specified exception handlers.
gUefiCpuPkgTokenSpaceGuid.PcdCpuStackSwitchExceptionList
gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
|
|
In current implementation of CPU MP service, AP is initialized with data
copied from BSP. Stack switch required by Stack Guard feature needs different
GDT, IDT table and task gates for each logic processor. This patch adds GDTR,
IDTR and TR into structure CPU_VOLATILE_REGISTERS and related code in save
and restore methods. This can make sure that any changes to GDT, IDT and task
gate for an AP will be kept from overwritten by BSP settings.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
|
|
If Stack Guard is enabled and there's really a stack overflow happened during
boot, a Page Fault exception will be triggered. Because the stack is out of
usage, the exception handler, which shares the stack with normal UEFI driver,
cannot be executed and cannot dump the processor information.
Without those information, it's very difficult for the BIOS developers locate
the root cause of stack overflow. And without a workable stack, the developer
cannot event use single step to debug the UEFI driver with JTAG debugger.
In order to make sure the exception handler to execute normally after stack
overflow. We need separate stacks for exception handlers in case of unusable
stack.
IA processor allows to switch to a new stack during handling interrupt and
exception. But X64 and IA32 provides different ways to make it. X64 provides
interrupt stack table (IST) to allow maximum 7 different exceptions to have
new stack for its handler. IA32 doesn't have IST mechanism and can only use
task gate to do it since task switch allows to load a new stack through its
task-state segment (TSS).
The new API, InitializeCpuExceptionHandlersEx, is implemented to complete
extra initialization for stack switch of exception handler. Since setting
up stack switch needs allocating new memory for new stack, new GDT table
and task-state segment but the initialization method will be called in
different phases which have no consistent way to reserve those memory, this
new API is allowed to pass the reserved resources to complete the extra
works. This is cannot be done by original InitializeCpuExceptionHandlers.
Considering exception handler initialization for MP situation, this new API
is also necessary, because AP is not supposed to allocate memory. So the
memory needed for stack switch have to be reserved in BSP before waking up
AP and then pass them to InitializeCpuExceptionHandlersEx afterwards.
Since Stack Guard feature is available only for DXE phase at this time, the
new API is fully implemented for DXE only. Other phases implement a dummy
one which just calls InitializeCpuExceptionHandlers().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
|
|
Stack switch is required by Stack Guard feature. Following two PCDs are
introduced to simplify the resource allocation for initializing stack switch.
gUefiCpuPkgTokenSpaceGuid.PcdCpuStackSwitchExceptionList
gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize
PcdCpuStackSwitchExceptionList is used to specify which exception will
have separate stack for its handler. For Stack Guard feature, #PF must
be specified at least.
PcdCpuKnownGoodStackSize is used to specify the size of knwon good stack for an
exception handler. Cpu driver or other drivers should use this PCD to reserve
new stack memory for exceptions specified by above PCD.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
SMM profile and static paging could not be enabled at the same time,
this patch is to add check and comments to make sure it.
Similar comments are also added for the case of static paging and
heap guard for SMM.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Only DumpCpuContext in error case, otherwise there will be too many
debug messages from DumpCpuContext() when SmmProfile feature is enabled
by setting PcdCpuSmmProfileEnable to TRUE. Those debug messages are not
needed for SmmProfile feature as it will record those information to
buffer for further dump.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=540
To consume FIT table for Microcode update,
UefiCpuPkg/Feature/Capsule/MicrocodeUpdateDxe
needs to be updated to consume
IntelSiliconPkg/Include/IndustryStandard/FirmwareInterfaceTable.h,
but UefiCpuPkg could not depend on IntelSiliconPkg.
Since the Microcode update feature is specific to Intel,
we can first move the Microcode update feature code from
UefiCpuPkg to IntelSiliconPkg [first step], then update
the code to consume FIT table [second step].
This patch series is for the first step.
Note: No any code change in this patch, just move.
Next patch will update MicrocodeUpdate to build with the package.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
More than one entry of RT_CODE memory might cause boot problem for some
old OSs. This patch will fix this issue to keep OS compatibility as much
as possible.
More detailed information, please refer to
https://bugzilla.tianocore.org/show_bug.cgi?id=753
Laszlo did a thorough test on OVMF emulated platform. The details can be found
at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Cc: Wu Hao <hao.a.wu@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
|
|
"Main.asm" calls TransitionFromReal16To32BitFlat (and does some other
things) before it jumps to the platform's SEC entry point.
TransitionFromReal16To32BitFlat enters big real mode, and sets the DS, ES,
FS, GS, and SS registers to offset ("selector") LINEAR_SEL in the GDT
(defined in "UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm"). The
GDT entry ("segment descriptor") at LINEAR_SEL defines a segment covering
the full 32-bit address space, meant for "read/write data".
Document this fact for all the affected segment registers, as output
parameters for TransitionFromReal16To32BitFlat, saying "Selector allowing
flat access to all addresses".
For 64-bit SEC, "Main.asm" calls Transition32FlatTo64Flat in addition,
between calling TransitionFromReal16To32BitFlat and jumping to the SEC
entry point. Transition32FlatTo64Flat enters long mode. In long mode,
segmentation is largely ignored:
- all segments are considered flat (covering the whole 64-bit address
space),
- with the (possible) exception of FS and GS, whose bases can still be
changed, albeit with new methods, not through the GDT. (Through the
IA32_FS_BASE and IA32_GS_BASE Model Specific Registers, and/or the
WRFSBASE, WRGSBASE and SWAPGS instructions.)
Thus, document the segment registers with the same "Selector allowing flat
access to all addresses" language on the "Main.asm" level too, since that
is valid for both 32-bit and 64-bit modes.
(Technically, "Main.asm" does not return, but RBP/EBP, passed similarly to
the SEC entry point, is already documented as an output parameter.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
Heap guard makes use of paging mechanism to implement its functionality. But
there's no protocol or library available to change page attribute in SMM mode.
A new protocol gEdkiiSmmMemoryAttributeProtocolGuid is introduced to make it
happen. This protocol provide three interfaces
struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
};
Since heap guard feature need to update page attributes. The page table
should not set to be read-only if heap guard feature is enabled for SMM
mode. Otherwise this feature cannot work.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
Heap guard feature will frequently update page attributes. The debug message
in CpuDxe driver will slow down the boot performance noticeably. Changing the
debug level to DEBUG_VERBOSE to reduce the message output for normal debug
configuration.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
For some special platforms (such as Ovmf), it is possible
that, some APs start up *and finish* before the remaining
APs start up *at all*. In this case, the enhance
solution by changes 0594ec41 not works as expected.
This change remove check CpuMpData->CpuCount logic to let old
solution still workable if platform owner still set a long
time for PcdCpuApInitTimeOutInMicroSeconds. It's platform
owner's response to decide which solution to use.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
|
|
In current implementation, CPU initialized can be done in PEI
or DXE phase. PEI uses CpuFeaturesPei and Dxe uses CpuFeaturesDxe.
If CPU initialized in PEI phase, CpuFeaturesDxe driver will
not be used. This driver will install gEdkiiCpuFeaturesInitDoneGuid
protocol after it initializes the CPU.
Some drivers depend on this protocol to dispatch themselves. If
CpuFeaturesDxe not been used, these drivers will not be dispatched.
This patch fix the above issue. If Cpu initialized in PEI
phase, it also report a guid HOB for CpuFeaturesDxe.
CpuFeaturesDxe will check this HOB first. If it found this
HOB, it just install gEdkiiCpuFeaturesInitDoneGuid protocol,
else it will also do the CPU initialization.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Current logic always waiting for a specific value to collect all APs
count. This logic may caused some platforms cost too much time to
wait for time out.
This patch add new logic to collect APs count. It adds new variable
NumApsExecuting to detect whether all APs have finished initialization.
Each AP let NumApsExecuting++ when begin to initialize itself and let
NumApsExecuting-- when it finish the initialization. BSP base on whether
NumApsExecuting == 0 to finished the collect AP process.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
|
|
Original AP index variable name not well express the meaning
of the variable. Also this name is better used in later patch.
So change the variable name for better understanding.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
|
|
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
ClearMasks and OrMasks are not 8-byte aligned.
But SetMem64 requires the input address is 8-byte aligned.
If the input is not 8-byte aligned, assertion is hit.
Use SetMem instead.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
MtrrLibSetBelow1MBMemoryAttribute() may be called multiple times.
It's possible that in a 2nd call, Modified[0] is set to TRUE in
1st call but ClearMasks[0] and OrMasks[0] is uninitialized in
2nd call. It causes FixedSettings->Mtrr[0] be set to random
data.
The patch fixes this issue by introducing a local Modified[]
array and only updates FixedSettings->Mtrr[] when LocalModified[i]
is TRUE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
MicrocodeDetect function will run by every threads, and it will
use PcdGet to get PcdCpuMicrocodePatchAddress and
PcdCpuMicrocodePatchRegionSize, if change both PCD default to dynamic,
system will in non-deterministic behavior.
By design, UEFI/PI services are single threaded and not re-entrant
so Multi processor code should not use UEFI/PI services. Here, Pcd
protocol/PPI is used to access dynamic PCDs so it would result in
non-deterministic behavior.
This code get PCD value in BSP and save them in CPU_MP_DATA for Ap.
https://bugzilla.tianocore.org/show_bug.cgi?id=726
Cc: Crystal Lee <CrystalLee@ami.com.tw>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
ARRAY_SIZE(Mtrrs->Variables.Mtrr) was used in
MtrrDebugPrintAllMtrrsWorker() to parse the MTRR registers.
Instead, the actual variable MTRR count should be used.
Otherwise, the uninitialized random data in MtrrSetting may cause
MtrrLibSetMemoryType() hang.
Steven Shi found this bug in QEMU when using Q35 chip.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Steven Shi <steven.shi@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
|
|
The patch optimized the MTRR access code to skip the Base MSR
access when the Mask MSR indicates the pair is invalid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
|
|
The new algorithm converts the problem calculating optimal
MTRR settings (using least MTRR registers) to the problem finding
the shortest path in a graph.
The memory required in extreme but rare case can be up to 256KB,
so using local stack buffer is impossible considering current
DxeIpl only allocates 128KB stack.
The patch changes existing MtrrSetMemoryAttributeInMtrrSettings() and
MtrrSetMemoryAttribute() to use the 4-page stack buffer for
calculation. The two APIs return BUFFER_TOO_SMALL when the buffer
is too small for calculation.
The patch adds a new API MtrrSetMemoryAttribute*s*InMtrrSettings() to
set multiple-range attributes in one function call.
Since every call to MtrrSetMemoryAttributeInMtrrSettings (without-s)
or MtrrSetMemoryAttribute() requires to calculate the MTRRs for the
whole physical memory, combining multiple calls in one API can
significantly reduce the calculation time.
In theory, if N times of call to without-s API costs N seconds,
the new API only costs 1 second.
The new API uses the buffer supplied from caller to calculate
MTRRs and returns BUFFER_TOO_SMALL when the buffer is too small for
calculation.
Test performed:
1. Random test
a. Generate random memory settings, use the new algorithm to
calculate the MTRRs.
b. Read back the MTRRs and check the memory settings match
the desired memory settings.
c. Repeat the above #1 and #2 100000 times.
2. OVMF 32PEI + 64DXE boot to shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
The patch changes MtrrLibLeastAlignment() to
MtrrLibBiggestAlignment() and optimizes the implementation
to be more efficient.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
The patch replaces some if-checks with assertions because
they are impossible to happen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
|
|
Current code assume Communicate Ppi always existed, so it adds
ASSERT to confirm it. Ovmf platform happened not has this Ppi, so
the ASSERT been trig. This patch handle Ppi not existed case.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Driver will send S3 resume finished event to SmmCore through communicate
buffer after it signals EndOfPei event.
V2 Changes:
1. Change structures name to avoid they start with EFI_.
2. Base on DXE phase bits to provide communication buffer, current implement
check both PEI and DXE phase.
V3 Changes:
1. Change structure name for better understanding.
2. Enhance communication buffer calculate logic to more accurate.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
The mechanism behind is the same as NULL pointer detection enabled in EDK-II
core. SMM has its own page table and we have to disable page 0 again in SMM
mode.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
Current code logic not check the pointer before use it. This may
has potential issue, this patch add code to check it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
|
|
This patch is to fix an assert issue during booting IA32 platforms
such as OvmfIa32 or Quark. This issue is caused by trying to access
page table on a platform without page table. A check is added to
avoid the assert.
Bug tracker: https://bugzilla.tianocore.org/show_bug.cgi?id=724
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
|
|
Replace hard-coded machine code with equivalent assembly source code.
Changes tested by checking for machine code equivalence by disassembling
the original and changed code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
V2:
Change function parameter to avoid touch global info in function.
Enhance function name, make it more user friendly
V1:
Refine code to avoid duplicate code to set processor register.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
In S3 resume path, current implementation do 2 separate INIT-SIPI-SIPI,
this is not necessary. This change combine these 2 INIT-SIPI-SIPI to 1
and add CpuPause between them.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
The ConfigData parameter initialized in *GetConfigData function should not be NULL in
later *Support, *Initilize function, so just add ASSERT code check in these functions.
Cc: Ming Shao <ming.shao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
There're uninitialized variables warning reported by GCC.
This patch will fix it. The original commit is
c1cab54ce57c2608b8b3ea051c7041f036f21153
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
|
|
From CpuDxe driver perspective, it doesn't update GCD memory attributes from
current page table setup during its initialization. So the memory attributes in
GCD might not reflect all memory attributes in real world.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
"Detect CPU count: %d\n" is an informative message, not an error report.
Set its debug mask to DEBUG_INFO.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
Merge the code to MachineCheck.c file, remove this file.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
GetProcessorLocationByApicId ()
- Use max possible thread count to decode InitialApicId on AMD processor.
- Clean-up on C Coding standards.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
PI has description said If an AP is enabled, then the implementation must
guarantee that a complete initialization sequence is performed on the AP,
so the AP is in a state that is compatible with an MP operating system.
Current implementation just set the AP to idle state when enable this AP
which is not follow spec. This patch fix it.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|