summaryrefslogtreecommitdiff
path: root/ShellPkg
AgeCommit message (Collapse)AuthorFilesLines
2017-02-23ShellPkg UefiDpLib: Remove TimerLib dependencyStar Zeng9-56/+25
Current UefiDpLib implementation depends on TimerLib, as different platforms may implement and use their own TimerLib, it makes the dp command needs to be built by platform. The TimerLib dependency can be removed by using performance property configuration table to make UefiDpLib to be generic. Cc: Andrew Fish <afish@apple.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Cinnamon Shia <cinnamon.shia@hpe.com> Cc: Jaben Carsey <jaben.carsey@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Andrew Fish <afish@apple.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
2017-02-16ShellPkg/pci: Report error when invalid value is specified for "-ec"Ruiyu Ni2-7/+16
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-02-10ShellPkg SmbiosView: Correct some outputs for Type 0/3/10Star Zeng3-3/+4
Type 0: Update "EDD Enhanced Disk Driver)..." to "EDD (Enhanced Disk Driver)..." for STR_SMBIOSVIEW_PRINTINFO_EDD_ENHANCED_DRIVER Type 3: Use L" Laptop" instead of L" LapTop" in SystemEnclosureTypeTable to match SMBIOS spec. Type 10: The BIT7 of Device Type is representing the status of device whether it is enabled or disabled. But current code is not considering the BIT7 and will print "Undefined Value" for enabled device. Type 41 has same definition of Device Type, the code is correct and will be applied to Type 10 by this patch. Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jaben Carsey <jaben.carsey@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-02-10ShellPkg SmbiosView: Eliminate trailing " | " in PrintBitsInfo()Star Zeng1-5/+13
Current PrintBitsInfo() will always print an additional trailing " | " for the bit flags, for example, Base Board Feature Flags: Hosting board | Replaceable | Th patch is to eliminate trailing " | " in PrintBitsInfo(), then the output will be like below Base Board Feature Flags: Hosting board | Replaceable Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jaben Carsey <jaben.carsey@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-02-03ShellPkg/cd: Do not print the destination dir when CD exitsRuiyu Ni1-3/+1
Before the "cd fs0:dir" fix, CD only prints destination directory when the destination contains ":". However, the "cd fs0:dir" fix changed CD to always print destination directory. This patch changes CD to never print destination directory. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Cc: Chris J Phillips <chrisp@hpe.com> Reviewed-by: Tapan Shah <tapandshah@hpe.com>
2017-01-25ShellPkg/pci: Fix extended register dumping for MFVC capabilityRuiyu Ni1-1/+2
https://bugzilla.tianocore.org/show_bug.cgi?id=355 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-25ShellPkg/pci: Support interpreting specific PCIE ext cap thru "-ec"Ruiyu Ni2-42/+34
The implementation was already there but through a private flag "-_e". The patch removes "-_e" support and add "-ec" support. Removing old "-_e" support makes the pci command more clean. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-25ShellPkg/pci: Use PCI definitions defined in MdePkgRuiyu Ni2-721/+284
https://bugzilla.tianocore.org/show_bug.cgi?id=354 The patch removes the local PCI definitions and uses the definitions defined in MdePkg/Include/IndustryStandard folder. There is no functionality impact. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jarben.carsey@intel.com>
2017-01-24ShellPkg SmbiosView: Add decoding of SMBIOS spec 3.1.1Star Zeng4-3/+57
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=349 Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jaben Carsey <jaben.carsey@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-22ShellPkg SmbiosView: Add decoding of SMBIOS spec 3.1.0Star Zeng4-2/+102
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=340 The decoding of TPM Device (Type 43) has been added at e9f0be021b7649c15d823e193110c0088cda9a89. Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jaben Carsey <jaben.carsey@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-19ShellPkg: Add check logic for the gateway validity.Zhang Lubo2-2/+20
if we set a static IP using command 'ifconfig -s eth0 static 192.168.0.121 255.255.255.0 0.0.0.0' The system says 'Failed to set address.' but using 'ifconfig -l', the static IP can be assigned successfully. so we need to check the gateway validity before setting manual address to keep the ifconfig -s command more consistent. Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Santhapur Naveen <naveens@amiindia.co.in> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-01-19ShellPkg/HandleParsingLib: Fix coding style issueDandan Bi1-2/+2
Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-19ShellPkg SmbiosView: Add missing decoding of SMBIOS spec 3.0.0Star Zeng2-1/+97
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=345 When I am adding SMBIOS spec 3.1.0 support, I found the decoding of SMBIOS spec 3.0.0 for some definitions is missing. Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-19ShellPkg SmbiosView: Add missing decoding of SlotType AGP8XStar Zeng1-1/+5
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=344 SlotType AGP8X was added in SMBIOS spec 2.3.4, but the decoding of it is missing. I found it when I am adding SMBIOS spec 3.1.0 support. Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-13ShellPkg/Ifconfig6: Address ASSERT because of a missing NULL checkhegdenag1-13/+14
When we issue 'ifconfig6 -s <interface> auto' system hangs with an ASSERT in StrLen. in IfConfig6SetInterfaceInfo, for 'auto' case we added checks to rule out the invalid inputs like 'host', 'gw' and 'dns'. To parse through this, we do a VarArg = VarArg->Next but we dont check new VarArg before calling StrCmp. Fix with a check in this patch. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
2017-01-13ShellPkg/SmbiosView: Add decoding of SMBIOS record type 43Linson Augustine4-2/+95
Added decoding of the new SMBIOS Type 43 record. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Augustine Linson P <linson.augustine@hpe.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-01-12ShellPkg: Update smbiosview command to display Type 3 valuesChris Phillips1-3/+16
The smbiosview command was not displaying SMBIOS Type 3 Height, NumberofPowerCords, or SKU Number. Added handling to display these values. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Chris Phillips <chrisp@hpe.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-01-11ShellPkg/Shell: Add double quotes to args with white spaceMichael Kinney1-9/+57
https://bugzilla.tianocore.org/show_bug.cgi?id=332 When the ShellLib ShellExecute() API or the Shell Protocol Execute() API are used to execute a command, the arguments are parsed to produce the Argc/Argv list in the Shell Parameters Protocol and double quotes are removed from arguments that are surrounded by double quotes. This is the required behavior of the Shell Parameters Protocol. The ProcessCommandLine() function in the shell implementation uses the Argc/Argv list from the Shell Parameters Protocol to assemble a new command line, but the double quotes that may have been originally present for an argument are not preserved. ProcessCommandLine() is updated to check if an argument added to the generated command line contains one or more white space characters, and if it does, double quotes are added around the argument. Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
2017-01-11ShellPkg/HandleParsingLib: Fix build failure due to missing semicolonRuiyu Ni1-1/+1
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
2017-01-11ShellPkg/dh: Support dump from GUID and "decode" parameterRuiyu Ni2-84/+292
To follow Shell spec 2.2, change "dh" to support dump from protocol GUID and support "decode" parameter to dump the GUID/name mapping. Contributed-under: TianoCore Contribution Agreement 1.0 Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-11ShellPkg/Dh: Fix coding style issuesChen A Chen1-65/+54
The change doesn't impact the functionality. Contributed-under: TianoCore Contribution Agreement 1.0 Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-11ShellPkg/HandleParsingLib: Add new API GetAllMappingGuidsChen A Chen2-1/+72
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-11ShellPkg/HandleParsingLib: Return NULL name for unknown GUIDRuiyu Ni3-32/+34
GetStringNameFromGuid() returns NULL for unknown GUID, instead of returning "UnknownDevice". The behavior change matches ShellProtocol.GetGuidName(). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-11ShellPkg/HandleParsingLib: Rename global variablesRuiyu Ni1-18/+18
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2017-01-06ShellPkg: Fix a bug ">>v" cannot append data to environment variableChen A Chen1-1/+5
When ">v" is used to redirect the command output to environment variable, the ending "\r\n\0" is removed before setting to environment variable but the length is not updated. It causes ">>v" fails to append data to the environment variable created by ">v". The patch fixes the above bug. Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-12-29ShellPkg/cd: Fix "cd" to support "fs0:dir" (no slash after ':')Ruiyu Ni1-176/+241
When "fs0:dir"(drive letter without slash) is used as destination of "cd", "cd" tries to change to "dir" in root directory of "fs0:". It's incorrect. The correct behavior is to change to "dir" in current directory of "fs0:" Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-12-16ShellPkg/setvar: Correct typo in setvar help messageRuiyu Ni1-3/+3
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-12-14ShellPkg/UefiShellNetwork2CommandsLib: Fix incorrect Protocol formatDandan Bi1-1/+1
Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-12-14ShellPkg/UefiShellNetwork1CommandsLib: Fix incorrect Protocol formatDandan Bi1-1/+1
Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-12-14ShellPkg/UefiShellDebug1CommandsLib: Fix coding style issuesDandan Bi1-2/+3
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-12-09ShellPkg: Assign the correct value to ShellStatusGary Lin1-3/+3
Since the type of ShellStatus is SHELL_STATUS, we should use SHELL_INVALID_PARAMETER instead of EFI_INVALID_PARAMETER. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Cc: Zhang Lubo <lubo.zhang@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2016-12-09ShellPkg: Add missing header line for SFO flag in 'cls' commandTapan Shah2-0/+2
Adding a missing header line for 'cls -sfo' command Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Tapan Shah <tapandshah@hpe.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-12-09ShellPkg/Application: Fix ">v" cannot update environment variableChen A Chen3-44/+142
When ">v" is used to redirect the command output to environment variable (e.g.: "echo xxx >v yyy"), we only called SetVariable() to update the variable storage but forgot to update the cached environment variables in gShellEnvVarList. When updating the variable storage, the existing code unnecessary saved the ending NULL character into variable storage. The patch fixes all the above issues. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Tapan Shah <tapandshah@hpe.com>
2016-12-06ShellPkg: Add error prompt message in Ifconfig6 command.Zhang Lubo3-1/+25
v2: update the prompt message more readable. It should display error prompt message when Ifconfig6 can not configure correctly. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed by : Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2016-12-05ShellPkg/MV: Fix MV to deny moving parent of current directoryChen A Chen1-6/+75
When user types "mv -r fs0:\A\ fs1:\" under directory "fs0:\A\B\", MV command should deny such movement. The patch fixes the above issue. It also denies moving current directory. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2016-11-23ShellPkg: update ping6 to use timer service instead of timer arch protocol .Zhang Lubo3-76/+170
This patch update the shell ping command to use timer service to calculate the RTT time, instead of using the timer arch protocol. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Ni Ruiyu <ruiyu.ni@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2016-11-16ShellPkg: #ifndef of header files should have postfix underscoreRuiyu Ni3-6/+6
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-11-16ShellPkg/dmpstore: Support "-sfo"Ruiyu Ni2-61/+154
The patch adds the "-sfo" support to "dmpstore" command. When -l or -d is specified, -sfo is not supported. When the variable specified by name and GUID cannot be found, an error message is displayed; Otherwise, the SFO is displayed. E.g.: "dmpstore -guid GuidThatDoesntExist -sfo" produces output as: ShellCommand,"dmpstore" VariableInfo,"","GuidThatDoesntExist","","","" "dmpstore NameThatDoesntExist -guid GuidThatDoesntExist -sfo" produces output as: ShellCommand,"dmpstore" dmpstore: No matching variables found. Guid GuidThatDoesntExist, Name NameThatDoesntExist The difference between the above 2 cases is that former one only specifies the GUID, but the latter one specifies both name and GUID. Since not specifying GUID means to use GlobalVariableGuid, "dmpstore NameThatDoesntExist -sfo" produces the similar output as latter one. I personally prefer to always produce SFO output for both cases. But the above behavior is the discussion result between HPE engineers. Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Tapan Shah <tapandshah@hpe.com>
2016-11-15ShellPkg: Fix typos in comments and variablesGary Lin8-18/+18
- funciton -> function - paramter -> parameter - supresses -> suppresses - Seperator -> Separator - permenant -> permanent Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com>
2016-11-11ShellPkg/ShellCommandLib: Add missing EFIAPI for public library APIsRuiyu Ni2-1/+5
DumpHex() and CatSDumpHex() are public library APIs but don't have EFIAPI modifier. Add the missing EFIAPI. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-11-10ShellPkg: Fix the coding style issueBi, Dandan1-2/+2
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2016-11-07ShellPkg/Ping6: Add a note in help for TargetIphegdenag1-0/+2
'Ping6 TargetIp' is a valid command input but we bail out when TargetIp is a link local address because we would want the user to specify the NIC (via SourceIp) through which he/she would want to ping to TargetIp. This patch updates the help text to mention the same. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-11-07ShellPkg/reset: Support "-fwui" flagChen A Chen2-5/+44
The patch adds "-fwui" support to reset command which is newly added to Shell 2.2 spec. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-10-31ShellPkg: print only valid characters for file overwrite promptTapan Shah1-2/+7
When copy command prompts to overwrite an existing file, pressing backspace continuously removes everything including the shell prompt. So print only valid characters for file overwrite prompt. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Tapan Shah <tapandshah@hpe.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-10-27ShellPkg/UefiShellLevel2CommandsLib: rebase to ARRAY_SIZE()Laszlo Ersek1-1/+1
Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-10-27ShellPkg/UefiDpLib: rebase to ARRAY_SIZE()Laszlo Ersek1-5/+5
Cc: Jaben Carsey <jaben.carsey@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
2016-10-25ShellPkg: update ping to use timer service instead of timer arch protocol .Fu Siyuan3-70/+171
The ping command uses PI CPU arch protocol to calculate the RTT time, which is not allowed to use in UEFI shell. This patch updates it to use the UEFI timer event and Stall service to estimate the system timer period. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
2016-10-24ShellPkg: handle '-t or -terse' and '-s' flags for 'ver' command properlyTapan Shah1-9/+15
'-t or -terse' and '-s' flags are multiple exclusive So when both flags are used together, command should report an error message. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Tapan Shah <tapandshah@hpe.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-10-19ShellPkg: Update sources to include MdePkg protocol definitionsRuiyu Ni21-58/+45
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
2016-10-19ShellPkg: Update header files to reference MdePkg protocol definitionRuiyu Ni5-3/+82
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
generated by cgit v1.1 at 2024-11-08 17:52:07 +0000