Age | Commit message (Collapse) | Author | Files | Lines |
|
Bugzilla: 3048 (https://bugzilla.tianocore.org/show_bug.cgi?id=3048)
Add a new parser for the Arm Error Source Table (AEST) described in
the ACPI for the Armv8 RAS Extensions 1.1 Platform Design Document,
dated 28 September 2020.
(https://developer.arm.com/documentation/den0085/0101/)
AEST enables kernel-first handling of errors in a system that supports
the Armv8 RAS extensions. It covers Armv8.2+ RAS extensions for PEs
and the RAS system architecture for non-PE system components.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3138
Define structures for Resizable BAR Capability in
MdePkg/Include/IndustryStandard/PciExpress21.h,
Change ShellPkg/Library/UefiShellDebug1CommandsLib/Pci.c
to use new structures.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Bugzilla: 3047 (https://bugzilla.tianocore.org/show_bug.cgi?id=3047)
Create a new parser for the PCCT Table.
The PCCT Table is used to describe how the OSPM can
communicate with entities outside the platform. It
describes which memory spaces correspond to which
entity as well as a few of the needed information
to handle the communications.
This new PCCT parser dumps the values and names of
the table fields. It also performs some validation
on the table's fields.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
Bugzilla: 3046 (https://bugzilla.tianocore.org/show_bug.cgi?id=3046)
The field validator function provides means to validate fields
in the ACPI table structures. To print complex field types a
print formatter function is provided.
The field validator was being invoked for simple data fields
for which the default print format is used. However, the field
validator function was not invoked if a print formatter function
was provided.
This problem is noticed when a Generic Address Structure (GAS)
is printed using DumpGas() and a field validator is present
to validate the GAS structure.
To fix this move the invocation of the field validator after
the field is printed such that the validation function is
called even when a print formatter function is present.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
"FirmwareVersion" was misspelled "FirwareVersion".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
In SmBios.h, the SMBIOS_TABLE_TYPE4 field "ProcessorManufacture"
should be "ProcessorManufacturer".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2998
In the function FileBufferCutLine(),set the CutLine pointer to NULL,
The function header specifies that the pointer is valid on a successful
or failed return code.
Signed-off-by: Enze Zhu <zhuenze@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
SMBIOS 3.4.0 defines bit 9 of the Type 4 table Processor Characteristics
field to be the ARM64 SoC ID support. Add support for it to the
smbiosview command.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
The "boot from CD supported" string definition name should contain the
word "from" instead of "form".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Fix a couple of typos in SmbiosViewStrings.uni:
"Boot form CD" should be "Boot from CD", and "plugged from the wall"
should be "plugged into the wall".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2352
Refer to SMBIOS 3.4 spec, add new memory device type - DDR5
and LPDDR5 support for the shell command "smbiosview".
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2361
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
Change how some SMBIOS TYpe 17 field values are printed:
- TotalWidth, DataWidth, ConfiguredMemoryClockSpeed: Print as
hex values instead of decimal, since there are some special meanings
for certain values (e.g. 0xFFFF)
- VolatileSize, NonVolatileSize, CacheSize, and LogicalSize: Print
as "0x%lx" instead of "0x%x" to prevent truncating output when
printing these QWORD fields.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
The UefiShellAcpiViewCommandLib is converted from NULL library to a
named library so that it may be used in modules other than shell.
The library interface exposes the main method for to AcpiView
functionality as well as a helper method to dump a buffer to a file.
The Shell module is still built by pulling UefiShellAcpiViewCommandLib
as a NULL library to preserve the modularity of shell builds.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
|
|
Method is refactored into two parts. A new method is
created that dumps arbitrary buffers into a newly created
file. This method is called from core code after the core code
determined the appropriate filename to be used.
This improves the modular design.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
|
|
Parsing command line parameters is done in the shell
command wrapper. This declutters the core code and improves
modular design.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
|
|
The table count module level symbols are now reset when
executing the core method, rather than the shell command
wrapper.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
|
|
A new file and header (AcpiViewConfig.[ch]) is created
that houses the user configuration. This declutters the
core code and improves modularity of the design.
The module level symbols for verbosity, table selection, and
highlighting are refactored into the new file.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
|
|
The error and warning counters are reset in the AcpiView main method.
This improves reusability of the main method.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2780
The timezone of following cities should be updated:
Istanbul: UTC+3
Novosibirsk: UTC+7
Georgetown (Guyana): UTC-4
Signed-off-by: Dorapika Wu <chuan-hsun.wu@hpe.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
This prevents overflow when printing DWORD fields such as the type 17
tables's extended DIMM size.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
For Arm-based platforms, count the instances of installed tables for
each ACPI table listed as 'mandatory' in any Server Base Boot
Requirements (SBBR) specification.
Validate that the all the mandatory SBBR tables present. Report an error
for each missing table.
This new feature is optional and can be enabled with the -r command line
parameter.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
For Arm-based platforms, define and implement an interface for Server
Base Boot Requirements (SBBR) compliance checks. The library is
responsible for validating that all mandatory ACPI tables are installed
on the platform.
Internally, the library maintains a data structure which tracks
instance counts for ACPI tables which are labeled as 'mandatory' in any
SBBR specification version. The provided interface allows:
- resetting all instance counts to 0
- incremementing the instance count for a table with a given signature
- validating the instance counts against the requirements in SBBR
The ACPI table requirements for each SBBR spec version are represented
internally as a list of table signatures.
Every missing mandatory table (for the input SBBR version) is reported
to the user as a separate error. If all requirements are met, an info
message is displayed.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
Define a new command line parameter '-r' to enable checking if all
mandatory ACPI tables listed in a specification are present.
The -r parameter takes an integer value to specify which specification
the validation should be performed against.
The parameter is used to set two Acpiview variables. An interface to
access these variables is implemented in this patch.
The new functionality is aimed at Arm-based platforms, however,
there are no restriction on extending it to other architectures.
For the 32-bit and 64-bit Arm architectures, the possible values for
the -r parameter are:
0: Arm Server Base Boot Requirements 1.0, March 2016
1: Arm Server Base Boot Requirements 1.1, May 2018
2: Arm Server Base Boot Requirements 1.2, September 2019
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2032
'ping' command's receive flow utilizes a single Rx token which it
attempts to reuse before recycling the previously received packet.
This causes a situation where under ICMP traffic,
Ping6OnEchoReplyReceived() function will receive an already
recycled packet with EFI_SUCCESS token status and finally
dereference invalid pointers from RxData structure.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2534
Extend validation of ACPI structure lengths which are read from the
ACPI table being parsed. Additionally check if the structure 'Length'
field value is positive. If not, stop parsing the faulting table.
Some ACPI tables define internal structures of variable size. The
'Length' field inside the substructure is used to update a pointer used
for table traversal. If the byte-length of the structure is equal to 0,
acpiview can enter an infinite loop. This condition can occur if, for
example, the zero-allocated ACPI table buffer is not fully populated.
This is typically a bug on the ACPI table writer side.
In short, this method helps acpiview recover gracefully from a
zero-valued ACPI structure length.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
Check if the ACPI table length, as reported in the ACPI table header, is
big enough to fit at least the header itself.
If not, report an error to the user and stop parsing the table in order
to prevent buffer overruns.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
Remove duplicate Generic Address Structure (GAS) and ACPI table header
size definitions. Replace any dependencies with the definitions from
Acpi63.h.
AcpiParser.h redefines the size of Generic Address Structure (GAS) and
the ACPI table header. The motivation is to 'minimise any reference to
the EDK2 ACPI headers in an attempt to provide cross checking'. While
the redefined values are unlikely to change, redefinition causes
unnecessary maintenance overhead for acpiview.
In addition to this, EDK2 ACPI headers are referenced throughout the
entire project, so the assumption should be that the definitions in
these header files are correct.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
Check if global (in the scope of the DBG2 parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
Check if global (in the scope of the GTDT parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
Check if global (in the scope of the IORT parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
Check if the NumberOfPrivateResources, ProcessorTopologyStructureType
and ProcessorTopologyStructureLength pointers have been successfully
updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
Check if the MadtInterruptControllerType and
MadtInterruptControllerLength pointers have been successfully updated
before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
Check if SratRAType and SratRALength pointers have been successfully
updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
1. Check if the 'Number of System Localities' provided can be
represented in the SLIT table. The table 'Length' field is a 32-bit
value while the 'Number of System Localities' field is 64-bit long.
2. Check if the SLIT matrix fits in the table buffer. If N is the SLIT
locality count, then the matrix used to represent the localities is
N*N bytes long. The ACPI table length must be big enough to fit the
matrix.
3. Remove (now) redundant 64x64 bit multiplication.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
Check if SlitSystemLocalityCount pointer has been successfully updated
before it is used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
Check if global pointers have been successfully updated before they
are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
Check if XsdtAddress pointer has been successfully updated before it
is used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
For fields outside the buffer length provided, reset any pointers,
which were supposed to be updated by a ParseAcpi() function call to
NULL. This way one can easily validate if a pointer was successfully
updated.
The ParseAcpi() function parses the given ACPI table buffer by a
number of bytes which is a minimum of the buffer length and the length
described by ACPI_PARSER array. If the buffer length is shorter than
the array describing how to process the ACPI structure, then it is
possible that the ItemPtr inside ACPI_PARSER may not get updated or
initialized. This can lead to an error if the value pointed to by
ItemPtr is later used to control the parsing logic.
A typical example would be a 'number of elements' field in an ACPI
structure header which defines how many substructures of a given type
are present in the structure body. If the 'number of elements' field
is not parsed, we will have a dangling pointer which could cause a
problem later.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
FADT parser was checking for reduced ACPI flag incorrectly
leading to incorrect error message if FIRMWARE_CTRL and
X_FIRMWARE_CTRL are both 0.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
|
|
Add support for revision 3 of System Resource Affinity Table (SRAT).
Decode and dump the new Generic Initiator Affinity Structure.
Validate the Device Handle Type field inside the Generic Initiator
Affinity Structure.
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Tested-by: Sudipto Paul <sudipto.paul@arm.com>
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1965
For function InsertNewGuidNameMapping, it rellocate the
mGuidList with new size
"mGuidListCount+1 * sizeof(GUID_INFO_BLOCK)". That isn't
its purpose and would cause a overflow operation in
"mGuidList[mGuidListCount - 1].xxx = xxx". Its purpose
is to increase 1 block size of mGuidList. Change it to
"(mGuidListCount + 1) * sizeof (GUID_INFO_BLOCK)".
Adjust the coding style of this function.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2379
When a file is saved in the edit command a status message L"%d Lines Wrote"
is displayed. The hexedit command suffers from the same typo.
Change the message to L"%d Lines Written".
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Updated IORT parser to conform to the IO Remapping
Table, Platform Design Document, Revision D, March 2018.
The following structure parsers have been updated:
1. SMMUv3 - added proximity domain and device Id
mapping index.
2. RootComplex - added memory address size limit.
2. PMCG - added page 1 support.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
Add support for parsing the ACPI FACS table.
The FADT parser has also been updated as it
links the FACS table using the FIRMWARE_CTRL
or X_FIRMWARE_CTRL fields.
Since the FACS table does not follow the standard
ACPI header, the FADT parser extracts the FACS
signature, length and version fields before invoking
the FACS parser.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
Memory Device (Type 17):
- SMBIOSCR00179: update the string for Intel persistent memory
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
Memory Device (Type 17):
- SMBIOSCR00178: add new memory device type value (HBM) and new form
factor value (Die)
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
Various:
- SMBIOSCR00183: add support for CXL Flexbus
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2305
System Slots (Type 9):
- SMBIOSCR00184: add PCI Express Gen 4 values
Add the SmBios.h to use the MARCOs or enums.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2300
On some firmwares PlatformLang is set to the local language (e.g. ru-RU),
however there is no Unicode Collation protocol instance that supports it.
As for missing PlatformLang, fall back to the first found instance.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
|