summaryrefslogtreecommitdiff
path: root/OvmfPkg/LsiScsiDxe
AgeCommit message (Collapse)AuthorFilesLines
2020-07-17OvmfPkg/LsiScsiDxe: Process the SCSI Request PacketGary Lin3-1/+431
This is the second part of LsiScsiPassThru(). LsiScsiProcessRequest() is added to translate the SCSI Request Packet into the LSI 53C895A commands. This function utilizes the so-called Script buffer to transmit a series of commands to the chip and then polls the DMA Status (DSTAT) register until the Scripts Interrupt Instruction Received (SIR) bit sets. Once the script is done, the SCSI Request Packet will be modified to reflect the result of the script. The Cumulative SCSI Byte Count (CSBC) register is fetched before and after the script to calculate the transferred bytes and update InTransferLength/OutTransferLength if necessary. v3: - Set DStat, SIst0, and SIst1 to 0 before using them - Amend the if statements for the DMA data instruction and add the assertions for the data direction - Also set SenseDataLength to 0 on the error path - Fix typos and amend comments - Amend the error handling of the calculation of transferred bytes v2: - Use the BITx macros for the most of LSI_* constants - Fix a typo: contorller => controller - Add SeaBIOS lsi-scsi driver as one of the references of the script - Cast the result of sizeof to UINT32 for the instructions of the script - Drop the backslashes - Replace LSI_SCSI_DMA_ADDR_LOW with LSI_SCSI_DMA_ADDR since we already removed DUAL_ADDRESS_CYCLE - Add more comments for the script - Fix the check of the script size at the end of the script - Always set SenseDataLength to 0 to avoid the caller to access SenseData - Improve the error handling in LsiScsiProcessRequest() Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Message-Id: <20200717061130.8881-11-glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-07-17OvmfPkg/LsiScsiDxe: Examine the incoming SCSI Request PacketGary Lin2-0/+102
This is the first part of LsiScsiPassThru(). Before processing the SCSI Request packet, we have to make sure whether the packet is valid or not. v2: Make LsiScsiPassThru() return EFI_UNSUPPORTED since this function is half-implemented Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200717061130.8881-10-glin@suse.com>
2020-07-17OvmfPkg/LsiScsiDxe: Map DMA bufferGary Lin2-1/+75
Map DMA buffer and perpare for the implementation of LsiScsiPassThru(). v2: - Replace 0x10000 with SIZE_64KB macro for the DMA buffer data array - Remove DUAL_ADDRESS_CYCLE from PciIo since we don't really need 64-bit DMA address Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200717061130.8881-9-glin@suse.com>
2020-07-17OvmfPkg/LsiScsiDxe: Open PciIo protocol and initialize the deviceGary Lin2-1/+138
Open PciIo protocol and use it to initialize the device. The initialization of LSI 53C895A is simple: just set the SRST bit in Interrupt Status Zero register to reset the device. v2: - Use the BITx macros for the bit constants - Add the closing of PciIo protocol in LsiScsiControllerStop() Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Message-Id: <20200717061130.8881-8-glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-07-17OvmfPkg/LsiScsiDxe: Report Targets and LUNsGary Lin3-2/+154
Implement LsiScsiGetNextTargetLun(), LsiScsiBuildDevicePath(), LsiScsiGetTargetLun(), and LsiScsiGetNextTarget() to report Targets and LUNs and build the device path. This commit also introduces two PCD value: PcdLsiScsiMaxTargetLimit and PcdLsiScsiMaxLunLimit as the limits for Targets and LUNs. v3: - Update the range of LUN in the assertioin - Squash the spurious newline into the previous commit v2: - Zero out (*Target) in LsiScsiGetTargetLun() - Use CopyMem() instead of the one-byte shortcut to copy target from ScsiDevicePath->Pun - Add asserts for PcdLsiScsiMaxTargetLimit and PcdLsiScsiMaxLunLimit Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Message-Id: <20200717061130.8881-7-glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-07-17OvmfPkg/LsiScsiDxe: Install stubbed EXT_SCSI_PASS_THRUGary Lin3-1/+244
Partially implement LsiScsiControllerStart() and LsiScsiControllerStop() to insert the scaffolding of EXT_SCSI_PASS_THRU functions. v3: Squash the newline below the declaration of LSI_SCSI_FROM_PASS_THRU v2: Remove the closing of PciIo protocol from LsiScsiControllerStop(). Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200717061130.8881-6-glin@suse.com>
2020-07-17OvmfPkg/LsiScsiDxe: Probe PCI devices and look for LsiScsiGary Lin2-1/+53
Implement LsiScsiControllerSupported() to probe the PCI ID and look for LSI 53C895A. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200717061130.8881-5-glin@suse.com>
2020-07-17OvmfPkg/LsiScsiDxe: Report the name of the driverGary Lin2-2/+98
Implement LsiScsiGetDriverName() and LsiScsiGetDeviceName() to report the name of the driver. Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200717061130.8881-4-glin@suse.com>
2020-07-17OvmfPkg/LsiScsiDxe: Install the skeleton of driver bindingGary Lin3-1/+122
Implement the dummy functions for EFI Driver Binding protocol. v2: Remove "STATIC" from LsiScsiControllerSupported() Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200717061130.8881-3-glin@suse.com>
2020-07-17OvmfPkg/LsiScsiDxe: Create the empty driverGary Lin2-0/+51
Create the driver with only a dummy LsiScsiEntryPoint() for the further implementation of the driver for LSI 53C895A SCSI controller. v2: Fix the mixed-case GUID string Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200717061130.8881-2-glin@suse.com>
generated by cgit v1.1 at 2024-11-15 12:24:09 +0000