summaryrefslogtreecommitdiff
path: root/NetworkPkg/Ip6Dxe
AgeCommit message (Collapse)AuthorFilesLines
2019-10-09NetworkPkg: fix CloseProtocol & UninstallMultipleProtocolInterfaces callsLaszlo Ersek1-1/+1
Both the "ControllerHandle" parameter of CloseProtocol() and the "Handle" parameter of UninstallMultipleProtocolInterfaces() have type EFI_HANDLE, not (EFI_HANDLE*). This patch fixes actual bugs. The issues have been dormant likely because they are on error paths. (Or, in case of TlsAuthConfigDxe, because the driver is unloaded likely very infrequently.) Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-04-09NetworkPkg: Replace BSD License with BSD+Patent LicenseMichael D Kinney33-231/+33
https://bugzilla.tianocore.org/show_bug.cgi?id=1373 Replace BSD 2-Clause License with BSD+Patent License. This change is based on the following emails: https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html RFCs with detailed process for the license change: V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
2019-02-19NetworkPkg/Ip6Dxe: Clean the invalid IPv6 configuration during driver start.Jiaxin Wu1-4/+22
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1448 *v3: Change the if condition check to only clean the invalid configuration. *v2: Add the warning debug message. This patch is to clean the invalid data and continue to start IP6 driver. Cc: Michael Turner <Michael.Turner@microsoft.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
2019-02-12NetworkPkg/Ip6Dxe: Uninstall protocols when error happen in Driver Binding ↵Jiaxin Wu1-9/+19
Start. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1447 This patch is to uninstall Ip6ServiceBindingProtocol and Ip6ConfigProtocol when error happen in Driver Binding Start. Cc: Michael Turner <Michael.Turner@microsoft.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Signed-off-by: Michael Turner <Michael.Turner@microsoft.com> Reviewed-By: Ye Ting <ting.ye@intel.com>
2018-08-14NetworkPkg: Removing ipf which is no longer supported from edk2.chenc21-1/+1
Removing rules for Ipf sources file: * Remove the source file which path with "ipf" and also listed in [Sources.IPF] section of INF file. * Remove the source file which listed in [Components.IPF] section of DSC file and not listed in any other [Components] section. * Remove the embedded Ipf code for MDE_CPU_IPF. Removing rules for Inf file: * Remove IPF from VALID_ARCHITECTURES comments. * Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section. * Remove the INF which only listed in [Components.IPF] section in DSC. * Remove statements from [BuildOptions] that provide IPF specific flags. * Remove any IPF sepcific sections. Removing rules for Dec file: * Remove [Includes.IPF] section from Dec. Removing rules for Dsc file: * Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC. * Remove any IPF specific sections. * Remove statements from [BuildOptions] that provide IPF specific flags. Cc: Siyuan Fu <siyuan.fu@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2018-06-28NetworkPkg: Clean up source filesLiming Gao13-99/+99
1. Do not use tab characters 2. No trailing white space in one line 3. All files must end with CRLF Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Liming Gao <liming.gao@intel.com>
2017-09-06NetworkPkg: Fix GCC build error.Fu Siyuan1-1/+1
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2017-09-06NetworkPkg/Ip6Dxe: fix a bug in IP6 driver for IpSec protocol notify.Fu Siyuan2-18/+14
The IP driver uses EfiCreateProtocolNotifyEvent() to register notify callback function for IpSec protocol, but it didn't notice that the callback will always be executed at least once, even the protocol wasn't in handle database. As a result, the Ip6IpSecProcessPacket() will still always call LocateProtocol() even the IpSec protocol is not installed, which will impact the network performance. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-08-17NetworkPkg/Ip6Dxe: Fix the bug when checking the DataSizeJiaxin Wu1-1/+1
During setting the DnsServer, the DataSize check is incorrect. This patch is to fix the issue. Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-08-11NetworkPkg/Ip6Dxe: Support SetData interface to clear specific configurationJiaxin Wu1-293/+399
UEFI Spec 2.7 adds the clarification on SetData interface usage to clear specific individual data types. This patch is to support this feature. Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-08-02NetworkPkg/Ip6Dxe: Fix the IPv6 PXE boot option goes missing issueJiaxin Wu1-19/+53
This patch is to fix the potential issue recorded at Bugzilla 636: https://bugzilla.tianocore.org/show_bug.cgi?id=636 The issue is caused by the IPv6 policy switching after PXEv6 boot. When IP policy is changing, the IPv6 children used by PXE.UdpRead() will be destroyed. Then, PXE Stop() function is called to uninstall the devicePath protocol, which leads to the IPv6 PXE boot option goes missing. Through the above analysis, the IP driver should take the responsibility for the upper layer network stacks recovery by using ConnectController(). Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Cc: Subramanian Sriram <sriram-s@hpe.com> Cc: Ni Ruiyu <ruiyu.ni@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Subramanian Sriram <sriram-s@hpe.com> Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
2017-06-14NetworkPkg: Typo fix and comments correctionJiaxin Wu1-3/+3
warter -> water Maunual -> Manual TCP and UDP --> TCP4 and TCP6 TCP or UDP --> TCP4 or TCP6 Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-04-20NetworkPkg: Fix bug related DAD issue in IP6 driver.Zhang, Lubo1-0/+4
If we set PXEv6 as the first boot option and reboot immediately after the first successful boot, it will assert. the root cause is when we set the policy from manual to automatic in PXE driver, the ip6 Configure item size is already set to zero and other structures are also released, So it is not needed to perform DAD call back function which is invoked by Ip6ConfigSetMaunualAddress. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
2017-02-27NetworkPkg/Ip6Dxe: Ignore duplicated DNS address checkJiaxin Wu1-10/+0
Having duplicated DNS server IPs specified is not an ideal configuration, but not an error condition. This patch is to remove the duplicated DNS address check to allow the same DNS address setting in SetData(). Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Cc: Subramanian Sriram <sriram-s@hpe.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Subramanian Sriram <sriram-s@hpe.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
2017-02-23NetworkPkg: Update the Ethernet interface name.Zhang Lubo1-1/+1
Update the interface name from ethA ethB to eth10, eth11 etc if port number more than 9. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Sriram Subramanian <sriram-s@hpe.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Sriram Subramanian <sriram-s@hpe.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-02-20NetworkPkg:Generate the correct operational state of the interface.Zhang Lubo1-5/+6
Currently, When there are more than 9 Ethernet ports available, 'ifconfig6 -l' is not listing all the ports, only show the ports 0 to 9. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Santhapur Naveen <naveens@amiindia.co.in> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2017-01-04NetworkPkg/Ip6Dxe: Fix the potential NULL pointer freeJiaxin Wu1-3/+7
Ip6ConfigSetDnsServer may cause ASSERT if the invalid DNS server address received. The issue is triggered by the NULL pointer(Tmp) free. Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
2016-10-26NetworkPkg: Fix typos in commentsGary Lin4-18/+18
- assocated -> associated - malformated -> malformatted - mal-formated -> mal-formatted - formated -> formatted - octects -> octets - responsiblity -> responsibility - enought -> enough - immediatly -> immediately - integar -> integer - Alogrithem -> Algorithm - Initializeion -> Initialization - primelenght -> primelength - Vlaue -> Value - perfoms -> performs - randome -> random - verifed -> verified - finallization -> finalization - Intializes -> Initializes - specifed -> specified - if -> If - Decrption -> Decryption - Autahentication -> Authentication - informatino -> information - alogrithm -> algorithm - Authenticaion -> Authentication - Alogrithem -> Algorithm - containning -> containing - paramter -> parameter Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-By: Siyuan Fu <siyuan.fu@intel.com> Reviewed-By: Jiaxin Wu <jiaxin.wu@intel.com>
2016-09-26NetworkPkg: Clean the previous address since the policy changedJiaxin Wu1-30/+29
The previous DNS server data will be retained after the policy changes from Auto to Manual. This patch is used to clean the previous dhcp configuration data. Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Cc: Subramanian Sriram <sriram-s@hpe.com> Cc: Ye Ting <ting.ye@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Sriram Subramanian <sriram-s@hpe.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
2016-07-11NetworkPkg: Fix typos in commentsGiri P Mudusuru2-4/+4
- abstrated to abstracted - apropriate to appropriate - availabe to available - ptototypes to prototypes - prococol protocol Cc: Siyuan Fu <siyuan.fu@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
2016-06-23NetworkPkg: Refine codes related to Dhcpv4 and Dhcpv6 configuration.Zhang Lubo4-8/+8
v2: *Since we have redefined the name of arch types in Dhcp.h for http boot, it need to change corresponding codes. Add a new head file Dhcp.h in Mde/Include/IndustryStandard, normalize the universal option numbers and other network number tags. Cc: Sriram Subramanian <sriram-s@hpe.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2016-05-31NetworkPkg: Stop the timer before clean IP service.Fu, Siyuan1-15/+16
In Ip6CleanService()it first cleaned some resources, then stop the timer . While before the timer stopped it may try to access some already freed data, which may generate an exception. This patch updates the driver to stop the timer event before starting to clean up the service data. Cc: Wu Jiaxin <jiaxin.wu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Subramanian Sriram <sriram-s@hpe.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com> Reviewed-by: Sriram Subramanian <sriram-s@hpe.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2016-04-14NetworkPkg: Fix issue in Ip6Dxe SetDataJiaxin Wu1-37/+35
EFI_NOT_READY should not be treated as an error status returned from SetData for Ip6ConfigDataTypeManualAddress since there is an asynchronous operation for DAD process. Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Sriram Subramanian <sriram-s@hpe.com> Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
2016-04-11NetworkPkg: Add new macros and refine codesZhang Lubo5-15/+15
v2: *refine some codes Add 2 macros in NetLib.h #define IP4_MASK_MAX 32 #define IP6_PREFIX_MAX 128 we will use these two macros to check the max mask/prefix length, instead of #define IP4_MASK_NUM 33 #define IP6_PREFIX_NUM 129 which means a valid number This will make the code readability and maintainability. Cc: Subramanian Sriram <sriram-s@hpe.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: Sriram Subramanian <sriram-s@@hpe.com>
2016-03-02NetworkPkg: Change the default IPv6 config policyJiaxin Wu4-31/+78
The default policy for Ip6Config is Ip6ConfigPolicyAutomatic, which results in all NIC ports starting SARR process when it receives RA message with M flag from IPv6 router. So, this patch is used to changes the the default IPv6 config policy to Ip6ConfigPolicyManualand also defer the SetData operation after Ip6ConfigProtocol installed. This update let the other platform drivers have chance to change the default config data by consume Ip6ConfigProtocol. Cc: Subramanian Sriram <sriram-s@hpe.com> Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Subramanian Sriram <sriram-s@hpe.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
2016-02-14NetworkPkg: better sanity check on Ipv6 prefix lengthSamer El-Haj-Mahmoud1-3/+4
Fix a possible buffer overrun issue that could occur if PrefixLength > 128 . Changed == 128 to >= 128. Also remove check for Byte < 16, which is no longer possible because of the first change. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2016-01-28NetworkPkg:Fix Network memory leak when calling GetModeData interfaceZhang Lubo1-1/+27
Multiple network protocols have a GetModeData() interface, which may allocate memory resource in the return mode data structure. It's callers responsibility to free these buffers. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19758 6f19259b-4bc3-4df7-8a09-765794883524
2015-12-15NetworkPkg: Convert all .uni files to utf-8Jordan Justen3-0/+0
To convert these files I ran: $ python3 BaseTools/Scripts/ConvertUni.py NetworkPkg Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19258 6f19259b-4bc3-4df7-8a09-765794883524
2015-09-02NetworkPkg: remove redundant words in function comment.Fu Siyuan1-1/+0
A function with void return type doesn't need @retval line in its function comment. This patch removes one redundant line from Ip6 driver in r18365. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18384 6f19259b-4bc3-4df7-8a09-765794883524
2015-08-31MdeModulePkg/NetworkPkg: Locate IpSec on IP packet processing only if it's ↵Samer El-Haj-Mahmoud3-0/+46
installed. Modified the logic in Ip4Dxe and Ip6Dxe to not locate EFI_IPSEC2_PROTOCOL on each message transmit/receive. Instead, register a callback in the drivers entry points on the IpSec protocol installation, and process only if the protocol is installed. This speeds up the network stacks when IpSec is not installed since there is a penalty associated with searching the entire handle database on each packet processing. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18365 6f19259b-4bc3-4df7-8a09-765794883524
2015-05-21Remove Framework HII "class\subclass" in all VFRDandan Bi1-2/+0
class/subclass is the obseleted key word in VFR file. It is designed in framework HII. After convert to UEFI HII, it is not used any longer. Now remove them from VFR Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17493 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-29Remove duplicate DAD entry in IP6 driver to fix DAD fail issue.Fu Siyuan2-13/+19
The IP6 driver may create duplicate IP6_DAD_ENTRY in DupAddrDetectList in some situation like: 1. Address policy switch but not clear the delay node list, OR 2. Set manual address repeatedly before the previous DAD is finished. The NS sent out by duplicate DAD entry will mix up with the loop back multicast packet, result in DAD fail. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17263 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-16NetworkPkg: Fix typo.Shumin Qiu1-2/+2
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Shumin Qiu <shumin.qiu@intel.com> Reviewed-by: Ting Ye <ting.ye@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com> Reviewed-by: Mudusuru Giri P <giri.p.mudusuru@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17049 6f19259b-4bc3-4df7-8a09-765794883524
2014-12-04NetworkPkg: Source fixes and cleanup for ARMGCC compilesRandy Pawell1-2/+1
- Fix EFI_IPv4_ADDRESS usages to use a macro to copy the structure instead of direct assignment, to avoid runtime alignment errors. - Delete excess local variables that are initialized but otherwise unused. - Add LibraryClasses.ARM & AARCH64 section in NetworkPkg.dsc file, containing a CompilerIntrinsicsLib null-library, required for successful standalone package builds (copied from MdeModulePkg.dsc). Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Randy Pawell <randy_pawell@hp.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16472 6f19259b-4bc3-4df7-8a09-765794883524
2014-10-21Clean up the code. Action statement should not have text two opcode.Eric Dong1-3/+0
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16221 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-181. Update PXE driver to support PXEv6 boot cross subnet.Fu, Siyuan1-6/+16
2. Update IP6 driver to use previous configured prefix length if a pre-exist IP6 address with unspecified prefix length. 3. Add NULL check for Dhcp protocol pointer before it decline the address in Ip6ConfigSetStatefulAddrCallback() function. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com> Reviewed-By: Ye, Ting (ting.ye@intel.com) Reviewed-By: Wu, Jiaxin <jiaxin.wu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16131 6f19259b-4bc3-4df7-8a09-765794883524
2014-09-03NetworkPkg: Convert non DOS format files to DOS formatGao, Liming1-0/+0
Module UNI and Package UNI files are not DOS format. Convert them to DOS format. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gao, Liming <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16049 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-28NetworkPkg: INF/DEC file updates to EDK II packagesDong, Guo1-0/+0
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module. a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion. c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion. 3. Add Module Extra UNI file that provides the localized Name of a module. a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file. b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation. c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dong, Guo <guo.dong@intel.com> Reviewed-by: Gao, Liming <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15960 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-28NetworkPkg: INF/DEC file updates to EDK II packagesDong, Guo2-0/+0
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module. a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion. c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion. 3. Add Module Extra UNI file that provides the localized Name of a module. a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file. b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation. c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dong, Guo <guo.dong@intel.com> Reviewed-by: Gao, Liming <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15947 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-28NetworkPkg: INF/DEC file updates to EDK II packagesDong, Guo1-13/+28
1. Usage information in INF file comment blocks are either incomplete or incorrect. This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes. The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dong, Guo <guo.dong@intel.com> Reviewed-by: Gao, Liming <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15946 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-15Use string pointer instead string buffer to avoid string copy operation.Fu, Siyuan1-4/+4
Use CopyMem() to guarantee the NULL terminal will always be appended to the destination string. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com> Reviewed-by: Yao, Jiewen <jiewen.yao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15810 6f19259b-4bc3-4df7-8a09-765794883524
2014-08-08Update network stack code to use StrnCpy instead of StrCpy.Fu, Siyuan1-4/+4
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu, Siyuan <siyuan.fu@intel.com> Reviewed-By: Dong, Eric <eric.dong@intel.com> Reviewed-by: Wu, Jiaxin <jiaxin.wu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15773 6f19259b-4bc3-4df7-8a09-765794883524
2014-07-28Update code to support VS2013 tool chain.Eric Dong1-1/+3
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15693 6f19259b-4bc3-4df7-8a09-765794883524
2014-06-25Refine code to make it more safely.Eric Dong1-1/+2
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15589 6f19259b-4bc3-4df7-8a09-765794883524
2014-05-071. Mark the network volatile variables as deprecated in code comments and ↵Fu Siyuan4-184/+4
remove related code to set/get these variable. 2. Remove the GetTime() call when receiving Udp4/6 packets. Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye, Ting <ting.ye@intel.com> Reviewed-by: Wu, Jiaxin <jiaxin.wu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15497 6f19259b-4bc3-4df7-8a09-765794883524
2014-04-10Fix a bug in IP driver that the fragment overlap check may be skipped ↵Fu Siyuan1-2/+2
incorrectly. Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye, Ting <ting.ye@intel.com> Reviewed-by: Jin, Eric <eric.jin@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15443 6f19259b-4bc3-4df7-8a09-765794883524
2013-06-14Fixed the issue that IPv6 network stack assert infrequently – assert once ↵Ye Ting1-34/+45
every 300~400 PXE boots. Signed-off-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ouyang Qian <qian.ouyang@intel.com> git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14422 6f19259b-4bc3-4df7-8a09-765794883524
2013-03-20Making the IP6_CONFIG_DATA_RECORD the same size for both IA32 and X64 builds.sfu52-4/+4
Signed-off-by: Kinney, Michael D <michael.d.kinney@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14216 6f19259b-4bc3-4df7-8a09-765794883524
2013-03-20Remove HiiUpdateForm from ExtractConfig fucntion.sfu51-12/+1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Dong Eric <eric.dong@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14215 6f19259b-4bc3-4df7-8a09-765794883524
2013-01-15Update IPv6 configuration UI: 1) keep addresses blank when enter ‘Advanced ↵tye12-259/+228
Configuration’ page; 2) Save parameters in ‘Advanced Configuration’ immediately when user press ‘Commit Changes and Exit’ . Signed-off-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ouyang Qian <qian.ouyang@intel.com> git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14047 6f19259b-4bc3-4df7-8a09-765794883524
generated by cgit v1.1 at 2024-09-07 13:16:45 +0000