summaryrefslogtreecommitdiff
path: root/MdeModulePkg/Include
AgeCommit message (Collapse)AuthorFilesLines
2018-11-20MdeModulePkg/SdMmcPciHcDxe: Allow overriding base clock frequencyMarcin Wojtas1-2/+5
Some SdMmc host controllers are run by clocks with different frequency than it is reflected in Capabilities Register 1. It is allowed by SDHCI specification ver. 4.2 - if BaseClkFreq field value of the Capability Register 1 is zero, the clock frequency must be obtained via another method. Because the bitfield is only 8 bits wide, a maximum value that could be obtained from hardware is 255MHz. In case the actual frequency exceeds 255MHz, the 8-bit BaseClkFreq member of SD_MMC_HC_SLOT_CAP structure occurs to be not sufficient to be used for setting the clock speed in SdMmcHcClockSupply function. This patch adds new UINT32 array ('BaseClkFreq[]') to SD_MMC_HC_PRIVATE_DATA structure for specifying the input clock speed for each slot of the host controller. All routines that are used for clock configuration are updated accordingly. This patch also adds new IN OUT BaseClockFreq field in the Capability callback of the SdMmcOverride, protocol which allows to update BaseClkFreq value. The patch reuses original commit from edk2-platforms: 20f6f144d3a8 ("Marvell/Drivers: XenonDxe: Allow overriding base clock frequency") Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
2018-11-20MdeModulePkg/SdMmcPciHcDxe: Add SwitchClockFreqPost to SdMmcOverrideTomasz Michalec1-0/+1
Some SD Host Controlers need to do additional operations after clock frequency switch. This patch add new callback type to NotifyPhase of the SdMmcOverride protocol. It is called after SdMmcHcClockSupply. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
2018-11-20MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride protocolTomasz Michalec1-0/+17
Some SD Host Controllers use different values in Host Control 2 Register to select UHS Mode. This patch adds a new UhsSignaling type routine to the NotifyPhase of the SdMmcOverride protocol. UHS signaling configuration is moved to a common, default routine (SdMmcHcUhsSignaling). After it is executed, the protocol producer can override the values if needed. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
2018-11-20MdeModulePkg/SdMmcPciHcDxe: Add an optional parameter in NotifyPhaseMarcin Wojtas1-1/+3
In order to ensure bigger flexibility in the NotifyPhase routine of the SdMmcOverride protocol, enable using an optional phase-specific data. This will allow to exchange more information between the protocol producer driver and SdMmcPciHcDxe in the newly added callbacks. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
2018-09-06MdeModulePkg: Removing ipf which is no longer supported from edk2.Chen A Chen1-6/+1
Removing rules for Ipf sources file: * Remove the source file which path with "ipf" and also listed in [Sources.IPF] section of INF file. * Remove the source file which listed in [Components.IPF] section of DSC file and not listed in any other [Components] section. * Remove the embedded Ipf code for MDE_CPU_IPF. Removing rules for Inf file: * Remove IPF from VALID_ARCHITECTURES comments. * Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section. * Remove the INF which only listed in [Components.IPF] section in DSC. * Remove statements from [BuildOptions] that provide IPF specific flags. * Remove any IPF sepcific sections. Removing rules for Dec file: * Remove [Includes.IPF] section from Dec. Removing rules for Dsc file: * Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC. * Remove any IPF specific sections. * Remove statements from [BuildOptions] that provide IPF specific flags. Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chen A Chen <chen.a.chen@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-09-06MdeModulePkg: Remove trailing white spaceStar Zeng1-1/+1
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1144 Cc: Dandan Bi <dandan.bi@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com> Reviewed-by: Dandan Bi <dandan.bi@intel.com>
2018-09-03MdeModulePkg/Network: Add 32bit subnet mask support for IP4 PXE boot.Fu Siyuan1-2/+3
This patch updates IP4 stack to support 32bit subnet mask in PXE boot process. When 32bit subnet mask is used, the IP4 driver couldn't use the subnet mask to determine whether destination IP address is on-link or not, so it will always try to send all the packets to the destination IP address directly first, if failed it will continue to try the default gateway. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
2018-07-27MdeModulePkg/PlatformBootManager: Add PlatformBootManagerUnableToBootRuiyu Ni1-0/+13
The patch adds a new API PlatformBootManagerUnableToBoot() to PlatformBootManagerLib. The new API is provided by platform bds library and is called when no boot option could be launched. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Michael Turner <Michael.Turner@microsoft.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Sunny Wang <sunnywang@hpe.com>
2018-07-13MdeModulePkg/PerformanceMeasurement.h: Correct the licenseDandan Bi1-22/+9
Corrected to use the BSD license. Cc: Liming Gao <liming.gao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Dmitry Antipov <dmanti@microsoft.com>
2018-07-05MdeModulePkg/S3SmmInitDone.h: Fix copyright coding style error.Eric Dong1-1/+1
It is caused by change d1102dba7210b95e41d06c2338a22ba6af248645. Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-06-28MdeModulePkg: Clean up source filesLiming Gao91-1142/+1142
1. Do not use tab characters 2. No trailing white space in one line 3. All files must end with CRLF Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-06-26MdeModulePkg: Update performance library instancesBi, Dandan1-6/+0
Update the performance library instances in MdeModulePkg to implement the APIs used for new added Perf macros. V2: Share the common logics of creating FPDT record for new added Perf macros and existing Perf macros. Cc: Liming Gao <liming.gao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2018-06-26MdeModulePkg/ExtendedFirmwarePerf: Remove PerfId definitionsBi, Dandan1-25/+0
Remove the definitions of performance identifier since they have been added into PerformanceLib.h. Cc: Liming Gao <liming.gao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2018-06-26MdeModulePkg: Add PERFORMANCE_MEASUREMENT_PROTOCOLBi, Dandan1-0/+91
Add PerformanceMeasurement protocol to log performance info. Cc: Liming Gao <liming.gao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2018-06-25MdeModulePkg: Add GUID for recovery capsule on NVM Express devicesHao Wu1-0/+9
Cc: Eric Dong <eric.dong@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-06-25MdeModulePkg: Add definitions for EDKII PEI NVME host controller PPIHao Wu1-0/+92
Introduces the below PPI: struct EDKII_NVM_EXPRESS_HOST_CONTROLLER_PPI { EDKII_NVM_EXPRESS_HC_GET_MMIO_BAR GetNvmeHcMmioBar; EDKII_NVM_EXPRESS_HC_GET_DEVICE_PATH GetNvmeHcDevicePath; }; The GetNvmeHcMmioBar service will provide the caller with the MMIO BAR address of each NVMe HC within the system; The GetNvmeHcDevicePath service will provide the caller with the device path information of each NVMe HC. Cc: Eric Dong <eric.dong@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2018-06-08MdeModulePkg: Add AtaAtapiPolicy protocol definitionRuiyu Ni1-0/+59
The patch adds AtaAtapiPolicy protocol which is produced by platform and consumed by AtaAtapiPassThruDxe driver. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-05-28MdeModulePkg: Add DisplayUpdateProgressLib classMichael D Kinney2-0/+120
https://bugzilla.tianocore.org/show_bug.cgi?id=801 Based on content from the following branch/commits: https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport Add the DisplayUpdateProgressLib class that is used to inform the user of progress during updates of firmware images in firmware devices. A platform specific instance of this library can be used to customize how the user is informed of progress. Add the EDK II Firmware Management Progress Protocol. This is an optional protocol that must be installed onto the same handle as a Firmware Management Protocol. This new protocol provides the color of a progress bar that allows different firmware devices to use different colors during a firmware update. It also provides a watchdog timer value in seconds that is armed each time the Progress() service passed into Firmware Management Protocol SetImage() is called. Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
2018-04-23MdeModulePkg/UefiBootManagerLib: fix AddLoadOptionVariable docs/prototypeRuiyu Ni1-8/+18
Clean up the leading comment and the prototype of EfiBootManagerAddLoadOptionVariable(): - the function may modify Option on output, annotate the parameter with OUT and update the documentation; - "@retval EFI_STATUS" and "@retval Others" are not idiomatic documentation, use @return instead; - sync comment and prototype between lib instance and lib class header. Change-Id: I8a609d6502b6f8929b2f568acaa147065003b6f4 Cc: Eric Dong <eric.dong@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
2018-04-04MdeModulePkg SmmMemoryAttribute.h: Refine some commentsStar Zeng1-10/+7
1. Fix some "support" to "supported". 2. Fix some "set" to "clear" in ClearMemoryAttributes interface. 3. Remove redundant comments for GetMemoryAttributes interface. Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2018-03-19MdeModulePkg: Fix coding style issues in file/function commentsDandan Bi1-1/+1
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-03-15MdeModulePkg/PciHostBridgeLib.h: add address TranslationHeyi Guo1-0/+19
Add Translation field to PCI_ROOT_BRIDGE_APERTURE. Translation is used to represent the difference between device address and host address, if they are not the same on some platforms. In UEFI 2.7, "Address Translation Offset" is "Offset to apply to the Starting address to convert it to a PCI address". This means: Translation = device address - host address So we also use the above calculation for this Translation field to keep consistent. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Heyi Guo <heyi.guo@linaro.org> Signed-off-by: Yi Li <phoenix.liyi@huawei.com> Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-03-13MdeModulePkg PCD: Remove PCD_TYPE_SKU_ENABLED in PCD_TYPE_ALL_SETStar Zeng1-1/+1
Remove PCD_TYPE_SKU_ENABLED in PCD_TYPE_ALL_SET. This change was missing at e8d2a9805286a2fd4f613697cf0cccb4a1ebc90d. Cc: Liming Gao <liming.gao@intel.com> Cc: Thomas Lamprecht <t.lamprecht@proxmox.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Eric Dong <eric.dong@intel.com>
2018-03-13MdeModulePkg PCD: Remove unused PCD attribute PCD_TYPE_SKU_ENABLEDGao, Liming1-2/+1
PcdDb optimization has handled PCD DB for each SKU, not for single PCD. So, this PCD attribute is not used any more. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-03-08MdeModulePkg LockBoxLib: Support LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLYStar Zeng1-3/+11
With this flag, the LockBox can be restored in S3 resume only. The LockBox can not be restored after SmmReadyToLock in normal boot and after EndOfS3Resume in S3 resume. It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE. Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
2018-03-03MdeModulePkg: Add S3SmmInitDone definitionStar Zeng1-0/+27
Add gEdkiiS3SmmInitDoneGuid, after S3 SMM initialization is done and before S3 boot script is executed, this GUID is installed as PPI in PEI and protocol in SMM environment. It allows for PEIMs or SMM drivers to hook this point and do the required tasks. Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
2018-02-28MdeModulePkg: Add Boot Logo 2 ProtocolKinney, Michael D1-0/+118
https://bugzilla.tianocore.org/show_bug.cgi?id=799 Based on content from the following branch/commit: https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport https://github.com/Microsoft/MS_UEFI/commit/33bab4031a417d7d5a7d356c15a14c2e60302b2d Add new Boot Logo 2 Protocol that adds a GetBootLogo() service that can be used to retrieve the GOP BLT buffer, location, and size of the boot logo that was previously registered with the SetBootLogo() service. The Boot Logo 2 Protocol service GetBootLogo() is amended to return the pointer to the GOP BLT buffer previously registered with the SetBootLogo() service. Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
2018-02-28MdeModulePkg/PlatformLogo.h: Correct function header commentsRuiyu Ni1-7/+2
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-02-24MdeModulePkg/RecoveryDevice.h: Remove semicolon after GUID definitionsHao Wu1-5/+5
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=877 Cc: Eric Dong <eric.dong@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-02-12MdeModulePkg/Performance.h: Remove the useless definitionDandan Bi1-26/+1
Remove the definitions related to old perf codes. Cc: Star Zeng <star.zeng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-02-11MdeModulePkg: Add BmpSupportLib class and instanceKinney, Michael D1-0/+106
https://bugzilla.tianocore.org/show_bug.cgi?id=800 Based on content from the following branch/commits: https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport https://github.com/Microsoft/MS_UEFI/commit/33bab4031a417d7d5a7d356c15a14c2e60302b2d https://github.com/Microsoft/MS_UEFI/commit/ca516b1a61315c2d823f453e12d2135098f53d61 https://github.com/Microsoft/MS_UEFI/commit/2b9f111f2e74a4c2ef4c4e32379e111f016dbd9b Add BmpSupportLib class and instances that provides services to convert a BMP graphics image to a GOP BLT buffer and to convert a GOP BLT buffer to a BMP graphics image. Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
2018-02-09MdeModulePkg/ResetSystemPei: Add reset notifications in PEIBret Barkelew3-4/+36
The Reset Notification protocol is added in UEFI spec to support reset notification mechanism in the DXE phase. This patch adds similar EDKII specific Reset Notification PPI to PEI phase to provide the same support. Cc: Liming Gao <liming.gao@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
2018-02-09MdeModulePkg: Add ResetUtility library class and BASE instanceMichael D Kinney1-0/+110
The library class that provides services to generate a GUID specific reset, parse the GUID from a GUID specific reset, and build the ResetData buffer for any type of reset that requires extra data. Cc: Liming Gao <liming.gao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
2018-02-09MdeModulePkg/ResetSystemRuntimeDxe: Add platform filter and handlerMichael D Kinney4-0/+120
Add support for platform specific reset filters and platform specific reset handlers to ResetSystem(). A filter may modify the reset type and reset data and call ResetSystem() with the modified parameters. A handler performs the reset action. The support for platform specific filters and platform specific handlers is based on the Reset Notification feature added to the UEFI 2.7 Specification. Platform specific reset filters are processed first so the final reset type and reset data can be determined. In the DXE Phase The UEFI Reset Notifications are processed second so all UEFI Drivers that have registered for a Reset Notification can perform any required clean up actions. The platform specific reset handlers are processed third. If there are no registered platform specific reset handlers or none of them reset the platform, then the default reset action based on the ResetSystemLib is performed. In the PEI Phase, filters and handlers are registered through the following 2 PPIs that are based on EFI_RESET_NOTIFICATION_PROTOCOL. * gEdkiiPlatformSpecificResetFilterPpiGuid * gEdkiiPlatformSpecificResetHandlerPpiGuid In the DXE Phase, filters and handlers are registered through the following 2 Protocols that are based on EFI_RESET_NOTIFICATION_PROTOCOL. * gEdkiiPlatformSpecificResetFilterProtocolGuid * gEdkiiPlatformSpecificResetHandlerProtocolGuid Cc: Liming Gao <liming.gao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
2018-02-08MdeModulePkg:Add definitions for new Performance infrastructureGao, Liming2-1/+303
V3: Add "FPDT_" prefix for related definitions. Cc: Liming Gao <liming.gao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Liming Gao <liming.gao@intel.com> Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
2018-02-07MdeModulePkg Ppi/IoMmu.h: Add EFI_NOT_AVAILABLE_YET return status codeStar Zeng1-2/+13
Install IOMMU PPI for pre-memory phase and return EFI_NOT_AVAILABLE_YET to indicate that DMA protection has been enabled, but DMA buffer are not available to be allocated yet. Cc: Jiewen Yao <jiewen.yao@intel.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
2018-01-30MdeModulePkg: introduce SD/MMC override protocolArd Biesheuvel1-0/+97
Many ARM based SoCs have integrated SDHCI controllers, and often, these implementations deviate in subtle ways from the pertinent specifications. On the one hand, these deviations are quite easy to work around, but on the other hand, having a collection of SoC specific workarounds in the generic driver stack is undesirable. So let's introduce an optional SD/MMC override protocol that we can invoke at the appropriate moments in the device initialization. That way, the workaround itself remains platform specific, but we can still use the generic driver stack on such platforms. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Hao Wu <hao.a.wu@intel.com> ​Reviewed-by: Star Zeng <star.zeng@intel.com>
2018-01-16MdeModulePkg: Did some code enhancement for DxeIpIoLib.Wang Fan1-2/+19
* In DxeIpIo, there are several places use ASSERT() to check input parameters without and descriptions or error handling. This patch fixed this issue. * Fixed some incorrect descriptions in code commence. * Remove unneeded Exit tag in function IpIoOpen and IpIoConfigIp. * Add EFIAPI tag for function IpIoRefreshNeighbor. Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2018-01-12MdeModulePkg/DxeNetLib: Add array range check in NetIp6IsNetEqual().Wang Fan1-4/+46
* The library API use array elements without any index range check, this patch is to fix this issue to avoid null pointer reference. V2 * Added an ASSERT check for the case PrefixLength equals to IP6_PREFIX_MAX. * Synced some code descriptions to head file. Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Hao Wu <hao.a.wu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
2018-01-09MdeModulePkg/DxeUdpIoLib: Did some code enhancement for UdpIoLibWang Fan1-2/+16
* Added some ASSERT descriptions for library APIs. * Added "Optional" option for Context parameter in UdpIoCancelDgrams(). * Added function return status check for UdpIoFreeIo(). Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wang Fan <fan.wang@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-12-27MdeModulePkg/DxeHttpLib: Refine some coding style.Jiaxin Wu1-2/+2
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wang Fan <fan.wang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-12-27MdeModulePkg/DxeHttpLib: Correct some return Status.Jiaxin Wu1-2/+3
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wang Fan <fan.wang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
2017-12-27MdeModulePkg/DxeHttpLib: Check the input parameters for some APIs.Jiaxin Wu1-0/+1
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wang Fan <fan.wang@intel.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com
2017-12-25MdeModulePkg: Update PCD driver to support the optimized PcdDataBaseLiming Gao1-9/+25
https://bugzilla.tianocore.org/show_bug.cgi?id=546 BaseTools will generate the optimized PCD database to save the image size at build time for multiple SKUs. The optimized PCD database layout will be like below, the PCD database will be composed of the full default SKU data (PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA). PCD driver will build HOB to store the full default SKU data, and patch HOB data based on non-default SKU delta data for the SKU set by SetSku(), it can save memory resource at boot time. // // PCD database layout: // +---------------------------------+ // | PCD_DATABASE_INIT (DEFAULT SKU) | // +---------------------------------+ // | PCD_DATABASE_SKU_DELTA (SKU A) | // +---------------------------------+ // | PCD_DATABASE_SKU_DELTA (SKU B) | // +---------------------------------+ // | ...... | // +---------------------------------+ // BaseTools, PCD database and driver updates are needed for this proposal. For single SKU (default) case, this proposal is expected to have no impact. For multi-SKU case, PCD database format will be changed. So, PcdDataBase Version is also updated from 6 to 7. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-12-25MdeModulePkg: Enable Firmware to retrieve the default settingLiming Gao1-0/+69
https://bugzilla.tianocore.org/show_bug.cgi?id=611 Add two PCDs and new PCD DB format definition Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
2017-12-22MdeModulePkg/IpIoLib: Check the input parameters before use them.Fu Siyuan1-9/+11
This patch updates the DxeIpIoLib to check the input parameters before using. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
2017-12-22MdeModulePkg/IpIoDxe: Update API description to match the function ↵Fu Siyuan1-0/+4
implementation. This patch updates some API descriptions in DxeIpIoLib to match the real implementation. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-12-22MdeModulePkg/IpIoLib: add more error handling code to DxeIpIoLib.Fu Siyuan1-1/+1
In DxeIpIo, there are several places not check the returned value of called functions. This patch is to add the error handling to these functions. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-12-18MdeModulePkg/IpIoLib: return error instead of ASSERT if input parameter is ↵Fu Siyuan1-11/+13
incorrect. This patch updates the DxeIpIoLib to return EFI_INVALID_PARAMETER instead of ASSERT if the input pointers are not correct. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
2017-12-12MdeModulePkg: Rename SmmEndOfS3ResumeProtocolGuid to EndOfS3ResumeGuidStar Zeng1-6/+6
Rename SmmEndOfS3ResumeProtocolGuid to EndOfS3ResumeGuid as the GUID may be used to install PPI in future to notify PEI phase code. The references in UefiCpuPkg are also being updated. Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
generated by cgit v1.1 at 2024-10-12 07:53:40 +0000