Age | Commit message (Collapse) | Author | Files | Lines |
|
1. Fix issues in comments
2. Fix Guid/protocol format
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Non-discoverable devices need to be registered explicitly by the platform.
Introduce a helper library that takes care of this.
This implementation currently only supports registering devices that are
covered by one or more MMIO resources. The underlying protocol allows for
more flexibility than that, but this is currently sufficient for the use
cases that we know about.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
|
|
Introduce a protocol that can be exposed by a platform for devices that
are not discoverable, usually because they are wired straight to the
memory bus rather than to an enumerable bus like PCI or USB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
|
|
* Introduce a generic Debugger Configuration protocol.
* Add private configuration data in the EBC Debugger and make it
register the Debugger Configuration protocol on initialization.
* Add a shell application that uses the protocol above to access
the private data in order to configure the EBC debugger.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Handle an invalid IPv6 address in NetLibAsciiStrToIp6(),
like '2000:aaaa::1com'.
Cc: Zhang Lubo <lubo.zhang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>
|
|
VM related defs are now in EbcVmTest.h, and opocode related definitions in
Ebc.h.
Because it is used by both the EBC Debugger and driver,
EbcDebugSignalException() sees its definition factorized in
EbcDebuggerHook.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
This table describes the SMM memory attributes.
The new GUID gEdkiiPiSmmMemoryAttributesTableGuid and its associated
structure are based on the EFI_MEMORY_ATTRIBUTES_TABLE and GUID from the
UEFI Specification.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: update commit message as requested by Michael Kinney]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
|
|
The API dispatches the deferred images that are returned from all
DeferredImageLoad instances.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
|
|
ProcessCapsules() API can be used by platform BDS to process all capsules.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
|
|
This library is used to authenticate a UEFI defined FMP Capsule.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
The classful addressing (IP class A/B/C) has been deprecated according to
RFC4632. This patch updates the NetLib NetGetIpClass() and NetIp4IsUnicast()
accordingly.
NetGetIpClass()
The function is kept for compatibility, while the caller of this function
could only check the returned value against with IP4_ADDR_CLASSD (multicast)
or IP4_ADDR_CLASSE (reserved) now. The function has been updated to note this.
NetIp4IsUnicast()
The NetMask becomes a required parameter to check the unicast address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
- opints -> points
- sucessfully -> successfully
- suported -> supported
- hexidecimal -> hexadecimal
- TURE -> TRUE
- servity -> severity
- Moudle -> Module
- contiue -> continue
- infomation -> information
- malformated -> malformatted
- Pepresentation -> Representation
- opeque -> opaque
- assocated -> associated
- Libary -> Library
- descrption -> description
- paramter -> parameter
- chracter -> character
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
This library provides interfaces to perform UEFI Graphics
Output Protocol Video BLT operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cc: Justen Jordan <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
1. Change PlatformLogo protocol to return EFI_IMAGE_INPUT instead of
RAW image data. PlatformLogo implementation can use HiiImageEx to
decode the image if it's JPEG or PNG format.
2. Change BootLogoLib to consume the new PlatformLogo protocol.
3. Change BootLogoEnableLogo() to only use images returned from
PlatformLogo protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
EDKII implementation protocol should be with EDKII_ prefix.
V2: add gEdkiiFormBrowserExProtocolGuid to align its structure name.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
To follow PI1.4a, BaseTools has be updated to fix artificial limitation of
SkuId range.
This patch is to update PCD database structure definition to match BaseTools.
Note: The source code and BaseTools need to be upgraded at the same time,
and if they are not upgraded at the same time, build error like below will
be triggered to help user identify the problem.
"Please make sure the version of PCD PEIM Service and the generated
PCD PEI Database match."
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
|
|
- abstrated to abstracted
- accessibla to accessible
- addres to address
- apropriate to appropriate
- arry to array
- availabe to available
- avaliable to available
- becasue to because
- correponding to corresponding
- etablished to established
- exeuction to execution
- extensiable to extensible
- fileds to fields
- loadding to loading
- ptototypes to prototypes
- prococol protocol
- requried to required
- resoruce to resource
- runing to running
- uild to build
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
At 94092aa60341a3e4b1e1ea7c362781b8404ac538, we extended
MEMORY_PROFILE_ALLOC_INFO to add ActionStringOffset and
Reserved2[6] fields, that was not aware the Reserved[4]
field can be reused to have better memory profile database
size efficiency.
With the patch, PcdMemoryProfilePropertyMask|0x3 and
PcdMemoryProfileMemoryType|0xffff, the memory profile
database size can be reduced as below on my sample platform.
UefiMemoryProfileSize - 0x1597A8 -> UefiMemoryProfileSize - 0x12AB28
SmramProfileSize - 0xCF68 -> SmramProfileSize - 0xB8E8
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
This is a enhancement to support the case when platform firmware
doesn't support Boot Manager Menu. For now, if BootManagerMenu FFS
can not be retrieved from FV, BDS core code will still register a
boot option for it. Then, this non-functional boot option will
still be booted by user's request (like HotKey or Exit from shell)
to cause additional boot time and error status code reported.
Therefore, it would be good to skip BootManagerMenu boot option
registration and then return error status and Invalid BootOption
data for this case so that the BootManagerBoot() or other consumers
can directly return without doing anything.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Provides services to record memory profile of multilevel caller.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Current memory profile feature:
1. Shows which line of code calls gBS->AllocateXXX(). But most entries
are from MemoryAllocationLib.
2. Records at the start.
3. Records all modules.
Enhanced memory profile feature:
1. User can know which line of code calls AllocateXXX() API instead of
gBS->Allocate().
2. User can know which line of code calls a specific API that will call
AllocateXXX().
3. User can know total memory allocated by a specific line of code.
4. User can configure to record single module.
5. User can configure when to enable recording.
6. User can know RVA<->Symbol (Function, Source, Line).
For the enhanced memory profile feature,
1. Extend MEMORY_PROFILE_DRIVER_INFO to include PdbString.
2. Extend MEMORY_PROFILE_ALLOC_INFO to include ActionString.
3. Extend MEMORY_PROFILE_ACTION to indicate action in memory allocation
lib and user defined action.
4. Extend memory profile protocol to include GetRecordingState/
SetRecordingState/Record.
5. Define SMM memory profile protocol.
6. Extend PcdMemoryProfilePropertyMask to support disable recording at
the start.
7. Introduce new PCD PcdMemoryProfileDriverPath to control which drivers
need memory profile data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Let data of DXE memory status code can be used by other modules.
1. Save the address of DXE memory status code table to DxeConfigurationTable.
2. Save the address of SMM memory status code table to SmmConfigurationTable.
3. Move RUNTIME_MEMORY_STATUSCODE_HEADER to its public header file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The BootLogoUpdateProgress() function uses the
EFI_GRAPHICS_OUTPUT_BLT_PIXEL type in its parameter list, but the protocol
header that defines this type is not included. This breaks dependent C
source files that don't otherwise include the GraphicsOutput protocol
header. Supply the necessary include directive.
(Similarly, BootLogoEnableLogo() uses
EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE in its parameter list. For that
however, the PlatformLogo protocol header is included already.)
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
Some platform doesn't require PciBus driver to assign resource
to PCI devices which causes PciRootBridgeIo.Configuration() cannot
return correct resource information to caller.
When resource assignment by PciBus is not mandatory, only light
version of PCI bus enumeration is performed, which only collects
the device resource consumption and publishes the PciIo instance.
The corresponding logic is in PciEnumeratorLight() in PciBus driver.
But PciEnumeratorLight() still depends on
PciRootBridgeIo.Configuration() returns the starting bus number in
order to search down to find all PCI devices under the root bridge.
When ResourceAssigned in PCI_ROOT_BRIDGE returned by
PciHostBridgeGetRootBridges() is TRUE, PciHostBridge driver treats
the Bus/Io/Mem/MemAbove4G/PMem/PMemAbove4G as the resource that are
*actually assigned* to the root bridge, instead of the resource that
*can be assigned* to the root bridge.
So that PciRootBridgeIo.Configuration() can return the correct
information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Expose EfiBootManagerGetLoadOptionBuffer() API.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
definition.
This patch enhance performance data SMM communication by using fixed
SMM communication buffer.
A new command SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET is added,
because we need to support get partial PerformanceData to fixed SMM communication
buffer. If performance data is bigger than fixed SMM communication buffer,
the DXE agent need to call SMM_FPDT_FUNCTION_GET_BOOT_RECORD_DATA_BY_OFFSET
multiple times to get all data out.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET definition.
This patch enhance SMM memory profile SMM communication by using fixed
SMM communication buffer.
A new command SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET is added,
because we need to support get partial ProfileData to fixed SMM communication
buffer. If profile data is bigger than fixed SMM communication buffer,
the DXE agent need to call SMRAM_PROFILE_COMMAND_GET_PROFILE_DATA_BY_OFFSET
multiple times to get all data out.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
This configuration table is used to describe platform pre-allocated memory
for SMM communication buffer. If DXE driver wants to communicate with SMM
agent, it can use this memory as SMM communication buffer instead of allocate
new memory region.
This is designed to meet Microsoft WSMT table definition on FIXED_COMM_BUFFERS
requirement.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
Rename and update the logic of HttpGenRequestString API provided
by DxeHttpLib. The RequestString size is returned as an argument.
The user is not expected to do a AsciiStrLen anymore, and is not
logical too, since request string can contain message body and
using AsciiStrLen on such a string can provide truncated lengths.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nagaraj Hegde <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
|
|
Add 2 macros inNetLib.h
#define IP4_MASK_MAX 32
#define IP6_PREFIX_MAX 128
we will use these two macros to check the max mask/prefix length,
instead of
#define IP4_MASK_NUM 33
#define IP6_PREFIX_NUM 129
which means a valid number.
This will make the code readability and maintainability.
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
Redfine the BmIsValidLoadOptionVariableName function to allow public use. Change name to EfiBootManagerIsValidLoadOptionVariableName to match naming scheme. Check that VariableName is never NULL and allow OptionType and OptionNumber to be optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Palmer <thomas.palmer@hpe.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
This stack includes:
1. Dxe phase support by:
1) SdMmcPciHcDxe driver to consume PciIo and produce
SdMmcPassThru.
2) SdDxe driver to consume SdMmcPassThru to produce
BlkIo1/BlkIo2.
3) EmmcDxe driver to consume SdMmcPassThru to produce
BlkIo1/BlkIo2/SSP.
2. Pei phase support
1) SdBlockIoPei driver to consume SdMmcHostController
Ppi and produce VirutalBlkIo1&2.
2) EmmcBlockIoPei driver to consume SdMmcHostController
Ppi and produce VirutalBlkIo1&2.
3) SdMmcPciHcPei driver to produce SdMmcHostController
Ppi.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
|
|
Xcode clang seems unhappy with both FileExplorerLib.h and
Protocol/FileExplorer.h both defining CHOOSE_HANDLER, now
remove the definition in FileExplorerLib.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
There some usefull functions in edk2 private modules that could be used,
so we added them to the httpLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ghazi Belaam <Ghazi.belaam@hpe.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
|
|
The "pc" ("pc-i440fx-*") machine types of QEMU don't support extended
config space. Accordingly, OVMF will use the following library instances
in connection with the core PciHostBridgeDxe driver:
BasePciSegmentLibPci [class: PciSegmentLib]
BasePciLibCf8 [class: PciLib]
BasePciCf8Lib [class: PciCf8Lib]
Add a new field to the PCI_ROOT_BRIDGE structure so that
RootBridgeIoCheckParameter() can catch config space offsets above 0xFF on
such old (emulated) platforms.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
... in preparation for the next patch.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
This patch is to add a new interface to get the "Path" component according to
the URI parse result, it would be helpful for the library user to extract the
file path value in a URI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
The RamDiskDxe driver will:
1. Produce the EFI RAM Disk Protocol
2. Install RAM disk device path and block I/O related protocols on the
RAM disk device handle.
3. Install RAM disk configuration form to HII database
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
|
|
This patch is used to define a general function to create
DNS QName.
QName is a domain name represented as a sequence
of labels, where each label consists of a length octet
followed by that number of octets. The domain name terminates
with the zero length octet for the null label of the root.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
|
|
Add BS+RT+AT variable attribute definition.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19785 6f19259b-4bc3-4df7-8a09-765794883524
|
|
PciHostBridgeDxe driver needs PciHostBridgeLib implemented by platform
to provide the root bridge related information and may call into
PciHostBridgeLib when resource conflicts happen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19655 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This patch is used to add DNS QType and QClass values definition
in NetLib.h
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19642 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add IpmiLib and Ppi/Protocol header file. Update dec file
for new IpmiLib and Ppi/Protocol header file.
In V5,change for coding style.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daocheng Bu <daocheng.bu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19485 6f19259b-4bc3-4df7-8a09-765794883524
|
|
file format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19294 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This driver produces file explorer protocol layered on top of the FileExplorerLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18918 6f19259b-4bc3-4df7-8a09-765794883524
|