Age | Commit message (Collapse) | Author | Files | Lines |
|
Jake reports that the IS_ARM_MEMORY_REGION_ATTRIBUTES_SECURE() macro is
no longer accurate since commit 852227a9d52e3cb9 ("ArmPkg/Mmu: Remove
handling of NONSECURE memory regions").
Fortunately, it only affects the NS bit in level 1 short descriptors,
which is ignored when executing in non-secure mode. And given that
running UEFI in the secure world is not a use case we aim to support,
let's just drop this logic altogether.
Reported-by: Jake Garver <jake@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
Now that we have a sane API to set and clear memory permissions that
works the same on ARM and AArch64, we no longer have a need for the
individual set/clear no-access/read-only/no-exec helpers so let's drop
them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
Currently, ArmSetMemoryAttributes () takes a combination of
EFI_MEMORY_xx constants describing the memory type and permission
attributes that should be set on a region of memory. In cases where the
memory type is omitted, we assume that the memory permissions being set
are final, and that existing memory permissions can be discarded.
This is problematic, because we aim to map memory non-executable
(EFI_MEMORY_XP) by default, and only relax this requirement for code
regions that are mapped read-only (EFI_MEMORY_RO). Currently, setting
one permission clears the other, and so code managing these permissions
has to be aware of the existing permissions in order to be able to
preserve them, and this is not always tractable (e.g., the UEFI memory
attribute protocol implements an abstraction that promises to preserve
memory permissions that it is not operating on explicitly).
So let's add an AttributeMask parameter to ArmSetMemoryAttributes(),
which is permitted to be non-zero if no memory type is being provided,
in which case only memory permission attributes covered in the mask will
be affected by the update.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
To prepare for the enablement of booting EFI with the SCTLR.WXN control
enabled, which makes all writeable memory regions non-executable by
default, introduce a memory type that we will use to describe the flash
region that carries the SEC and PEIM modules that execute in place. Even
if these are implicitly read-only due to the ROM nature, they need to be
mapped with read-only attributes in the page tables to be able to
execute from them.
Also add the XP counterpart which will be used for all normal DRAM right
at the outset.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
Non-secure memory is a distinction that only matters when executing code
in the secure world that reasons about the secure vs non-secure address
spaces. EDK2 was not designed for that, and the AArch64 version of the
MMU handling library already treats them as identical, so let's just
drop the ARM memory region types that mark memory as 'non-secure'
explicitly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
Currently, the ARM MMU page table logic will break down any block entry
that overlaps with the region being mapped, even if the block entry in
question is using the same attributes as the new region.
This means that creating a non-executable mapping inside a region that
is already mapped non-executable at a coarser granularity may trigger a
call to AllocatePages (), which may recurse back into the page table
code to update the attributes on the newly allocated page tables.
Let's avoid this, by preserving the block entry if it already covers the
region being mapped with the correct attributes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
Implement support for read-protected memory by wiring it up to the
access flag in the page table descriptor. The resulting mapping is
implicitly non-writable and non-executable as well, but this is good
enough for implementing this attribute, as we never rely on write or
execute permissions without read permissions.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
Currently, the MMU code that is supposed to clear the RO or XP
attributes from a region just clears both unconditionally. This
approximates the desired behavior to some extent, but it does mean that
setting the RO bit first on a code region, and then clearing the XP bit
results both RO and XP being cleared, and we end up with writable code,
and avoiding that is the point of all these protections.
Once we introduce RP support, this will only get worse, so let's fix
this up, by reshuffling the attribute update code to take the entry mask
from the caller, and use the mask to preserve other attributes when
clearing RO or XP.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
Split the ARM permission fields in the short descriptors into an access
flag and AP[2:1] as per the recommendation in the ARM ARM. This makes
the access flag available separately, which allows us to implement
EFI_MEMORY_RP memory analogous to how it will be implemented for
AArch64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
With large page support out of the picture, we can treat bits 1 and 0 of
the page descriptor as individual valid and XN bits, instead of treating
XN as a page type. Doing so aligns the handling of the attribute with
the section descriptor layout, as well as the XN handling on AArch64,
and this is beneficial for maintainability.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
Large page support on 32-bit ARM is essentially a glorified contiguous
bit where 16 consecutive entries describing a contiguous range with the
same attributes are presented in a way that permits the TLB to cache its
translation with a single entry.
This was never wired up completely, and does not add a lot of value in
EFI, where the page granularity is 4k and we expect to be able to set RO
and XP permissions on individual pages.
Given that large page support complicates the handling of the XN bit at
the page level (which is in a different place depending on whether the
page is small or large), let's just rip it out.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
|
|
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ArmPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
|
|
The 'cspell' CI test detected some small typos in ArmPkg.
Correct them.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
|
|
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2835
There's several occurrences of a UINT64 or an EFI_PHYSICAL_ADDRESS
being assigned to a UINT32 value in ArmMmuLib. These result in
warning C4244 in VS2019:
warning C4244: '=': conversion from 'UINT64' to 'UINT32', possible
loss of data
warning C4244: '=': conversion from 'EFI_PHYSICAL_ADDRESS' to
'UINT32', possible loss of data
This change explicitly casts the values to UINT32.
These can be reproduced with the following build command:
build -b DEBUG -a ARM -t VS2019 -p ArmPkg/ArmPkg.dsc
-m ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
|
|
We already expect normal memory to be mapped writeback cacheable if
EDK2 itself is to make use of it, so doing an early sanity check on
the memory type of the allocation that the page tables happened to
land in isn't very useful. So let's drop it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
|
|
The expression passed into ArmSetTTBR0 () in ArmConfigureMmu() is
sub-optimal at several levels:
- TranslationTable is already aligned, and if it wasn't, doing it
here wouldn't help
- TTBRAttributes is guaranteed not to have any bits set outside of
the 0x7f mask, so the mask operation is pointless as well,
- an additional (UINTN) cast for good measure is also not needed.
So simplify the expression.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
|
|
In the ARM version of ArmMmuLib, we are currently relying on set/way
invalidation to ensure that the caches are in a consistent state with
respect to main memory once we turn the MMU on. Even if set/way
operations were the appropriate method to achieve this, doing an
invalidate-all first and then populating the page table entries creates
a window where page table entries could be loaded speculatively into
the caches before we modify them, and shadow the new values that we
write there.
So let's get rid of the blanket clean/invalidate operations, and instead,
invalidate each page table right after allocating it, and each section
entry after it is updated (to address all the little corner cases that the
ARMv7 spec permits), and invalidate sets of level 2 entries in blocks,
using the generic invalidation routine from CacheMaintenanceLib
On ARMv7, cache maintenance may be required also when the MMU is
enabled, in case the page table walker is not cache coherent. However,
the code being updated here is guaranteed to run only when the MMU is
still off, and so we can disregard the case when the MMU and caches
are on.
Since the MMU and D-cache are already off when we reach this point, we
can drop the MMU and D-cache disables as well. Maintenance of the I-cache
is unnecessary, since we are not modifying any code, and the installed
mapping is guaranteed to be 1:1. This means we can also leave it enabled
while the page table population code is running.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
|
|
Instead of overallocating memory and align the resulting base address
manually, use the AllocateAlignedPages () helper, which achieves the
same, and might even manage that without leaking a chunk of memory of
the same size as the allocation itself.
While at it, fix up a variable declaration in the same hunk, and drop
a comment whose contents add nothing to the following line of code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Unlike the AArch64 implementation of ArmMmuLib, which combines the
initial page table population code with the code that runs at later
stages to manage permission attributes in the page tables, ARM uses
two completely separate sets of routines for this.
Since ArmMmuLib is a static library, we can prevent duplication of
this code between different users, which usually only need one or
the other. (Note that LTO should also achieve the same.)
This also makes it easier to reason about modifying the cache
maintenance handling, and replace the set/way ops with by-VA
ops, since the code that performs the set/way ops only executes
when the MMU is still off.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
|
|
Make the CONSTRUCTOR define in the .INF AARCH64 only, so we can drop
the empty stub that exists for ARM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
|
|
Fix various typos in ArmPkg.
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
Replace BSD 2-Clause License with BSD+Patent License. This change is
based on the following emails:
https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html
RFCs with detailed process for the license change:
V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
ArmSetMemoryAttributes() still chokes in some cases, i.e., when the
length of the region exceeds 4 GB, the subtraction overflows, which
results in the region being misidentified as being 32-bit addressable.
Let's update the logic to trim the length to what we can address with
32 bits. This fixes the issue, and also deals with the issue where an
entire region is disregarded if part of it exceeds beyond what we can
map with 32 bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Ignore calls to ArmSetMemoryAttributes () when the region described
is outside of the 32-bit addressable range. This memory is not
mapped in the first place, and the current code does not deal with
the high bits correctly, resulting in hangs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
PopulateLevel2PageTable () is invoked for [parts of] mappings that
start or end on a non-1 MB aligned address (or both). The size of
the mapping depends on both the start address modulo 1 MB and the
length of the mapping, but the logic that calculates this size is
flawed: subtracting 'start address modulo 1 MB' could result in a
negative value for the remaining length, which is obviously wrong.
So instead, take either RemainLength, or the rest of the 1 MB
block, whichever is smaller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Eugene Cohen <eugene@hp.com>
|
|
Commit 829633e3a82 ("ArmPkg/ArmMmuLib: Add new attribute
WRITE_BACK_NONSHAREABLE") introduced support for non-shareable
cached mappings to the AArch64 version of ArmMmuLib, but the ARM
version was left behind, so fix that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The ARM ArmMmuLib code currently does not take into account that
setting permissions on a region should take into account that a
region may not be mapped yet to begin with.
So when updating a section descriptor whose old value is zero,
pass in the address explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Mva address calculation should use the left-shifted current
section index instead of the left-shifted table base address.
Using the table base address here has the side-effect of potentially
causing an access violation depending on the base address value.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Given that these days, our ARM port only supports ARMv7 and later, we
can assume that the page table walker's memory accesses are cache
coherent, and so there is no need to perform cache maintenance. It
does require the page tables themselves to reside in memory mapped as
writeback cacheable so ASSERT() that this is the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Peculiarly enough, the current page table manipulation code takes it
upon itself to write back and invalidate the memory contents covered
by page and section mappings when their memory attributes change. It
is not generally the case that data must be written back when such a
change occurs, even when switching from cacheable to non-cacheable
attributes, and in some cases, it is actually causing problems. (The
cache maintenance is also performed on the PCIe MMIO regions as they
get mapped by the PCI bus driver, and under virtualization, each
cache maintenance operation on an emulated MMIO region triggers a
round trip to the host and back)
So let's just drop this code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
From what I can see this bug dates back to the commit from 2011 where
support for this was added: 2cf4b60895f8a
The first problem is that PopulateLevel2PageTable overflows the
translation table buffer because it doesn't verify that the size
actually fits within one level 2 page table.
The second problem is that the loop in FillTranslationTable doesn't
care about the PhysicalBase or the RemainLength and always substracts
one section size from RemainLength.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Now that we have the prerequisite functionality available in ArmMmuLib,
wire it up into ArmSetMemoryRegionNoExec, ArmClearMemoryRegionNoExec,
ArmSetMemoryRegionReadOnly and ArmClearMemoryRegionReadOnly. This is
used by the non-executable stack feature that is configured by DxeIpl.
NOTE: The current implementation will not combine RO and XP attributes,
i.e., setting/clearing a region no-exec will unconditionally
clear the read-only attribute, and vice versa. Currently, we
only use ArmSetMemoryRegionNoExec(), so for now, we should be
able to live with this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
We no longer make use of the ArmMmuLib 'feature' to create aliased
memory ranges with mismatched attributes, and in fact, it was only
wired up in the ARM version to begin with.
So remove the VirtualMask argument from ArmSetMemoryAttributes()'s
prototype, and remove the dead code that referred to it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
... where it belongs, since AARCH64 already keeps it there, and
non DXE users of ArmMmuLib (such as DxeIpl, for the non-executable
stack) may need its functionality as well.
While at it, rename SetMemoryAttributes to ArmSetMemoryAttributes,
and make any functions that are not exported STATIC. Also, replace
an explicit gBS->AllocatePages() call [which is DXE specific] with
MemoryAllocationLib::AllocatePages().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The routines ArmConfigureMmu(), SetMemoryAttributes() [*] and the
various set/clear read-only/no-exec routines are declared as returning
EFI_STATUS in the respective header files, so align the definitions with
that.
* SetMemoryAttributes() is declared in the wrong header (and defined in
ArmMmuLib for AARCH64 and in CpuDxe for ARM)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
This base library encapsulates the MMU manipulation routines that have been
factored out of ArmLib. The functionality covers initial creation of the 1:1
mapping in the page tables, and remapping regions to change permissions or
cacheability attributes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|