| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Standalone MM requires 4 KB section alignment for all images, so that
strict permissions can be applied. Unfortunately, this results in a
lot of wasted space, which is usually costly in the secure world
environment that standalone MM is expected to operate in.
So let's permit the standalone MM drivers (but not the core) to be
delivered in a compressed firmware volume.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
|
|
Sending DEBUG output to the serial port should only be done via
DebugLib calls, which is in charge of initializing the serial
port when appropriate. So drop the explicit SerialPortInitialize ()
invocation, and rely on normal constructor ordering to get the
serial port into the appropriate state at the right time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
|
|
Building StandaloneMmPkg from its .DSC is mainly intended for build
coverage, and so platform specific configuration such as UART addresses
don't belong here.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
|
|
gEfiMmConfigurationProtocolGuid is already defined in MdePkg, so drop
the duplicate definition from StandaloneMmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by "Yao, Jiewen" <jiewen.yao@intel.com>
|
|
In a system implementing the variable store in MM, there are no variable
arch protocol and variable write arch protocol installed into the
DXE_SMM protocol database. On such systems, it is not required to
locate these protocols by the DXE runtime variable drivers because
it can be assumed that these protocols are already installed in the
MM context. But then such an implementation will deviate from the
existing traditional MM based variable driver implementation.
So in order to maintain consistency with the traditional MM variable
driver implementation, allow platforms to install these protocols into
the DXE protocol database but these protocol will not be consumed
by non-secure variable service runtime driver.
The Platform which uses StandaloneMM based secure variable storage
have to include this library
Example
In edk2-platforms/Platform/ARM/SgiPkg/SgiPlatform.dsc
ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf {
<LibraryClasses>
NULL|StandaloneMmPkg/Library/VariableMmDependency/VariableMmDependency.inf
}
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Acked-by "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Driver was supporting only 32b DMA support for V3 controllers. Add
support for 64b DMA as well for completeness.
For V4.0 64b support, driver was looking at incorrect capability
register bit. Fix for that is present as well.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1583
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
|
|
The current servers listed appear to be unusable. I suspect most
people will get correct DNS servers via DHCP, but the defaults
should work for anyone.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
The current language for "Package Reviewer" only vaguely hints that
Package Reviewers should be able to provide guidance and directions.
Make this more obvious.
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
|
|
(CVE-2018-12181)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1135
For 4bit BMP, there are only 2^4 = 16 colors in the palette.
But when a corrupted BMP contains more than 16 colors in the palette,
today's implementation wrongly copies all colors to the local
PaletteValue[16] array which causes stack overflow.
The similar issue also exists in the logic to handle 8bit BMP.
The patch fixes the issue by only copies the first 16 or 256 colors
in the palette depending on the BMP type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1135
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
The BOM was introduced by commit 6c05b958df532345a35b418b05effcf7fd51fc4e
accidentally.
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Zhang, Chao B <chao.b.zhang@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Zhang, Chao B <chao.b.zhang@intel.com>
|
|
Cc: Yao Jiewen <jiewen.yao@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhang, Chao B <chao.b.zhang@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
Should make sure the TotalSize of Microcode is aligned with 4 bytes
before calling CalculateSum32 function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
|
|
The reason for this problem is that the file was opened incorrectly.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The Microcode region indicated by MicrocodePatchAddress PCD may contain
more than one Microcode entry. We should save InCompleteCheckSum32 value
for each payload. Move the logic for calculate InCompleteCheckSum32 from
the outsize of the do-while loop to the inside.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1576
The root cause of this issue is that non-stop mode of Heap Guard and
NULL Detection set TF bit (single-step) in EFLAG unconditionally in
the common handler in CpuExceptionLib.
If PcdCpuSmmStaticPageTable is FALSE, the SMM will only create page
table for memory below 4G. If SMM tries to access memory beyond 4G,
a page fault exception will be triggered and the memory to access
will be added to page table so that SMM code can continue the access.
Because of above issue, the TF bit is set after the page fault is
handled and then fall into another DEBUG exception. Since non-stop
mode of Heap Guard and NULL Detection are not enabled, no special
DEBUG exception handler is registered. The default handler just
prints exception context and go into dead loop.
Actually EFLAGS can be changed in any standard exception handler.
There's no need to do single-step setup in assembly code. So the fix
is to move the logic to C code part of page fault exception handler
so that we can fully validate the configuration and prevent TF bit
from being set unexpectedly.
Fixes: dcc026217fdc363f55c217039fc43d344f69fed6
16b918bbaf51211a32ae04d9d8a5ba6ccca25a6a
Test:
- Pass special test of accessing memory beyond 4G in SMM mode
- Boot to OS with Qemu emulator platform (Fedora27, Ubuntu18.04,
Windows7, Windows10)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1577
In WiFi Connection Manager scan process, the result received
from WiFi device driver will be freed twice, and will cause
unexpected errors, and even system crash.
This issue also exists in some other places potentially, this
patch is to fix these issues and also add Timer Cancelling
before Close to avoid potential NULL reference.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1509
Add python3-distutils Ubuntu package checking.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630
To follow PI spec, ensure FfsFileHeader 8 bytes aligned.
Current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630
To follow PI spec, ensure FfsFileHeader 8 bytes aligned.
For the integrity of FV(especially non-MemoryMapped FV) layout,
let CachedFv point to FV beginning, but not (FV + FV header).
And current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630
To follow PI spec, ensure FfsFileHeader 8 bytes aligned.
Current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
This reverts commit 838bc257bae3f9fc6723f41f3980f6cfbedb77e5.
After further evaluation, there are the unclear behavior in for the
driver combination feature. To not impact Q1 stable tag, remove it first.
1. If the drivers to be combined have the different PCD or library instance
setting, build should not combine them and report build break. But this
commit doesn't consider this case.
2. When start the sub driver fail, continue to start other sub driver. This
behavior is required to be clarifed in build spec.
3. Unload the sub driver when the combined driver start fail. This case need
to call the sub driver unload function for the driver start fail only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
* V2
* Remove Arch dependency in Inf file
* Add a global guid for WiFi formset and set other guids to module levels
* Open supplicant and EapConfig by BY_DRIVER
* Remove token free function to avoid potential NULL reference
* Update WifiMgrUpdateConnectMessage() to only display message for Current Nic
* Fix the potential NULL reference in AIP call
* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1492
Add WiFi Connection Manager in NetworkPkg to provide UI for users to scan
networks, connect or disconnect to networks.
This connection manager won't include the UNDI driver, supplicant driver,
or other device specific drivers and is therefor not a complete solution
stack for UEFI Wi-Fi, users can seek help for Wireless card vendors.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
We scan the SMM code with ROPgadget.
http://shell-storm.org/project/ROPgadget/
https://github.com/JonathanSalwan/ROPgadget/tree/master
This tool reports the gadget in SMM driver.
This patch enabled CET ShadowStack for X86 SMM.
If CET is supported, SMM will enable CET ShadowStack.
SMM CET will save the OS CET context at SmmEntry and
restore OS CET context at SmmExit.
Test:
1) test Intel internal platform (x64 only, CET enabled/disabled)
Boot test:
CET supported or not supported CPU
on CET supported platform
CET enabled/disabled
PcdCpuSmmCetEnable enabled/disabled
Single core/Multiple core
PcdCpuSmmStackGuard enabled/disabled
PcdCpuSmmProfileEnable enabled/disabled
PcdCpuSmmStaticPageTable enabled/disabled
CET exception test:
#CF generated with PcdCpuSmmStackGuard enabled/disabled.
Other exception test:
#PF for normal stack overflow
#PF for NX protection
#PF for RO protection
CET env test:
Launch SMM in CET enabled/disabled environment (DXE) - no impact to DXE
The test case can be found at
https://github.com/jyao1/SecurityEx/tree/master/ControlFlowPkg
2) test ovmf (both IA32 and X64 SMM, CET disabled only)
test OvmfIa32/Ovmf3264, with -D SMM_REQUIRE.
qemu-system-x86_64.exe -machine q35,smm=on -smp 4
-serial file:serial.log
-drive if=pflash,format=raw,unit=0,file=OVMF_CODE.fd,readonly=on
-drive if=pflash,format=raw,unit=1,file=OVMF_VARS.fd
QEMU emulator version 3.1.0 (v3.1.0-11736-g7a30e7adb0-dirty)
3) not tested
IA32 CET enabled platform
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
Add information dump for Control Protection exception.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
This patch adds SSP - shadow stack pointer to JumpBuffer.
It will be used for the platform that enabled CET/ShadowStack.
We add gEfiMdePkgTokenSpaceGuid.PcdControlFlowEnforcementPropertyMask
to control the global enable/disable.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
This is to add CET related instruction in Nasm
because CET instruction is not supported yet.
See https://www.nasm.us/xdoc/2.14.02/html/nasmdocb.html
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
parsing the message.
Fix CVE-2018-12178
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=809
The DNS driver only checks the received packet size against the
minimum DNS header size in DnsOnPacketReceived(), later it accesses
the QueryName and QuerySection beyond the header scope, which might
cause the pointer within DNS driver points to an invalid entry or
modifies the memory content beyond the header scope.
This patch is to fix above problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134
Originally, the block size of created Ram disks is hard-coded to 512
bytes. However, if the total size of the Ram disk is not a multiple of 512
bytes, there will be potential memory access issues when dealing with the
last block of the Ram disk.
This commit will adjust the block size of the Ram disks to ensure that the
total size is a multiple of the block size.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134
The commit adds checks for detecting GPT and MBR partitions.
These checks will ensure that the device block size is big enough to hold
an MBR (512 bytes).
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
|
|
When python3 reads an XML file it will parse the file in error
if the file has a BOM
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
This reverts commit bde673b2dcd1b087af7f49dd5f0c3b82b02172a5.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit 1d49a75367ef6827b8b8f77f61e9ce245d1bdee3.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit c788bdaba47536447ae37518a96d92e0da54aad7.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit 6814256083a90ef218e7ae240e51922045175df1.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit d3a15f435f9716aa2f2ea5e9b35fcda04f267ab4.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
This reverts commit 07f4e26eb6fe5203028ecfe9bad90d3b67dc72c8.
Reverting this patch as Soft Feature Freeze for
edk2-stable201903 started on 22 Feb 2019.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.
Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
LibGetTime():
- Two variables were used for the epoch, where only one should have been [*].
- Also harmonize variable name to match the one used in LibSetTime.
LibSetTime():
- Address possible underflows if time is set to start of epoch.
- Ensure that time being read does actually match time that was manually
set (plus the time elapsed since), by subtracting number of seconds
since reset.
[*] This fixes a build breakage, since one of these variables was set but
never used, triggering a compiler diagnostic at some optimization levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Steps:
1. Download edk2 tree
2. Build BaseTools
3. Go to edk2\BaseTools\Scripts\PackageDocumentTools
to run packagedoc_cli.py
An error occurs if relative imports are used when running
a file alone
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
FirmwareVolume.UnDispatchedFfsDict is mutated during iteration,
convert the FirmwareVolume.UnDispatchedFfsDict.keys() to a new list
to resolve this problem.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
The Eot will report error when python3 enabled.
We replaced sdict with collections.OrderedDict in python3
patch set, but the sdict implement "append" method which is not
implemented in collections.OrderedDict.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Minor updates to comments and typo fixes. Also removed
unused structure CM_ARM_CPU_INFO_LIST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Updated the Protocols section to reflect the protocols
that are produced or consumed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
|
Add support for 16550 UART to ACPI SPCR table as it is a
supported UART type by HLOS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
|
