| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add internal function MtrrLibIsMtrrSupported and
update IsMtrrSupported to call the new internal function.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
Trying to configure the TLS ciphers can lead to TLS handshake failures
because TlsCipherMappingTable is not in line with the ciphers actually
supported by OpensslLib.
Fix that by removing TlsCipherMappingTable altogether. Use
SSL_get_ciphers() instead to get the stack of ciphers supported by
openssl. Name and ID of the ciphers can be queried using the
SSL_CIPHER_get_name() and SSL_CIPHER_get_protocol_id() functions,
which allows us to map IDs to names without a hard-code table.
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=2541
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20231004092003.3809321-1-kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Yi Li <yi1.li@intel.com>
|
|
FdtPL011SerialPortLib claims that it's usable from the DXE_CORE. That's
not correct: the DXE_CORE calls DEBUG() and ASSERT() before it calls
ProcessLibraryConstructorList(). Via the BaseDebugLibSerialPort instance,
those DEBUG() and ASSERT() calls result in SerialPortWrite() calls, before
ProcessLibraryConstructorList() called either our constructor
FdtPL011SerialPortLibInitialize(), or BaseDebugLibSerialPortConstructor().
(And even if the DXE_CORE called the latter function early enough, it
would just invoke our SerialPortInitialize() function -- which does
nothing.)
This means that the earliest DXE_CORE debug messages are lost.
Rename FdtPL011SerialPortLibInitialize() to SerialPortInitialize(), so
that the same initialization occur through the constructor and the public
SerialPortInitialize() library API.
Turn SerialPortInitialize() calls after the first one into no-ops.
Our SerialPortLib APIs already use (mSerialBaseAddress != 0) to track
initialization. Rework those checks to actually initialize the library if
that hasn't happened yet.
The following new lines appear in the log:
> CoreInitializeMemoryServices:
> BaseAddress - 0x48000000 Length - 0xF8000000 MinimalMemorySizeNeeded - 0x38C8000
> InstallProtocolInterface: [EfiLoadedImageProtocol] 46EFC3E0
> ProtectUefiImageCommon - 0x46EFC3E0
> - 0x0000000046EB2000 - 0x0000000000068000
(0x46EB2000 is the load address of the DXE Core.)
Reported-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Build was previously using 3.11. Using 3.12 now that is is released.
To allow scripts to take time to update, fix to 3.11.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
|
|
Build was previously using 3.11. Using 3.12 now that is is released.
To allow scripts to take time to update, fix to 3.11.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
|
|
Add missing GUID declaration in DxeRngLib.inf.
Fixes: bd1f0eecc1df ("MdePkg/DxeRngLib: Request raw algorithm
instead of default")
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Leif Lindholm <quic_llindhol@quicinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
RO -> R0
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
The ARM implementation of InternalLongJump always returned the value
Value - but it is not supposed to ever return 0. Add the test to prevent
that, and return 1 if Value is 0 - as is already present in AArch64.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
Both in SetJump and in InternalLongJump, 32-bit w register views were
used for the UINTN return value. In SetJump, this did not cause errors;
it was only counterintuitive. But in InternalLongJump, it meant the top
32 bits of Value were stripped off.
Change all of these to use the 64-bit x register views.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reanimated-by: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
|
|
There may be architectures on which there are benefits to
eor r0, r0(, r0)
but ARM was never one of them. Change to more readable
mov r0, #0
instead.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
The SetJump comment header states that:
If JumpBuffer is NULL, then ASSERT().
However, this was not currently done.
Add a call to InternalAssertJumpBuffer.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
Drop redundant comment about IPF (clearly copied across from now deleted
code).
Also change
"Instead is resumes execution" ->
"Instead it resumes execution"
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
We added Sami as a reviewer to ArmPkg early last year, and I think it was
always our intention to have him as a reviewer of Arm architectural stuff
in general, but we seem to have missed out the Arm/AArch64 subdir
wildcards. So let's fix that.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4560
TRB Template is 16 bytes. When boundary checking is 64 bytes for xHCI
device/host memory address, it may exceed xHCI host memory pool and
cause unwanted DXE_ASSERT. Introduce a new input parameter to indicate
whether to enforce 64byte size alignment and round up. For TRB case,
should set it to FALSE to skip the size round up.
Signed-off-by: Gao Cheng <gao.cheng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
After running EmulatorPkg, one will notice that their terminal acts
strangely. This is caused by the EmulatorPkg Host changing the terminal
mode and not restoring the original mode, which is now fixed.
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4544
These value of Major/Minor version are updated from SMBIOS memory data,
but BCD Revision is updated from PCD PcdSmbiosVersion.
We should also update BCD Revision from SMBIOS memory data,
to ensure that get consistent version value.
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: HoraceX Lien <horacex.lien@intel.com>
|
|
confroms should be conforms.
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
|
|
Provide Fit format for UniversalPayload, developer can use argument
"--Fit" to build UniversalPayload.fit
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: BruceX Wang <brucex.wang@intel.com>
|
|
Add FdtGetName() and FdtNodeDepth() function.
Cc: Benny Lin <benny.lin@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Benny Lin <benny.lin@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: BruceX Wang <brucex.wang@intel.com>
|
|
Correct relax id from 99 to 100 and added relocation support up to 109
fix gcc14 adds new relocation, and the generated relocation
causes the build and compilation to fail.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4559
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Chao Li <lichao@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
Reviewed-by: Chao Li <lichao@loongson.cn>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=4552
Following XHCI spec 4.6.1.2, software may abort the
execution of Address Device Command when command failed
due to timeout.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: More Shih <more.shih@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Signed-off-by: Xianglei Cai <xianglei.cai@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2948
XhciDxe uses the timer functionality provided by the
boot services table to detect timeout conditions. This
breaks the driver's ExitBootServices call back, as
CoreExitBootServices halts the timer before signaling
the ExitBootServices event. If the host controller
fails to halt in the call back, the timeout condition
will never occur and the boot gets stuck in an indefinite
spin loop. Use the free running timer provided by
TimerLib to calculate timeouts, avoiding the potential
hang.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Patrick Henz <patrick.henz@hpe.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
Use AmlCodeGenRdQWordIo() to generate the I/O range in _CRS instead of
AmlCodeGenRdDWordIo() to cater to the scenarios where 64-bit addresses
can be used to generate I/O packets over the PCIe bus.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
Add helper functions to generate AML Resource Data describing I/O
ranges of four words long. API AmlCodeGenRdQWordIo () is exposed.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
Add API to generate a Name that contains a Unicode string buffer.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
Add API to add a String to a package created with NamedPackage API.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
Add support to add Return objects via AML that pass a single integer
argument to the named method.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
Add API to generate a ThermalZone object to AmlLib.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
The function UsbHcGetPciAddressForHostMem has
ASSERT ((Block != NULL)); and
and the function UsbHcFreeMem has
ASSERT (Block != NULL);
statement after for loop, but these are applicable only in DEBUG mode.
In RELEASE mode, if for whatever reasons there is no match inside for
loop and the loop exits because of Block != NULL; condition, then there
is no "Block" NULL pointer check afterwards and the code proceeds to do
dereferencing "Block" which will lead to CRASH.
Hence, for safety add NULL pointer checks always.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4211
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Co-authored-by: Veeresh Sangolli <veeresh.sangolli@dellteam.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
The function UhciConvertPollRate has a check
ASSERT (Interval != 0);
but this comes into play only in DEBUG mode. In Release mode, there is
no handling if the Interval parameter value is ZERO. To avoid shifting
by a negative amount later in the code flow in this undesirable case,
it is better to handle it as well by treating it same as if 1 is sent.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4211
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Co-authored-by: Veeresh Sangolli <veeresh.sangolli@dellteam.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
JsonObjectGetValue() cannot find corresponding JSON value
when the EDKII_JSON_VALUE object is created by another UEFI
driver. This is because "hashtable_seed" is initialized by
current time while JsonLib is loaded. So, "hashtable_seed"
will be different in each individual UEFI driver.
Signed-off-by: Nickle Wang <nicklew@nvidia.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Reviewed-by: Igor Kulchytskyy <igork@ami.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
|
|
InternalLongJump was not returning the 2nd parameter passed
to LongJmp (Value) as the return value from SetJmp.
Seen with code compiled with -Os, where an LongJmp (Buffer, -1)
somehow translated to SetJmp returning 0...
Cc: Yong Li <yong.li@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Tuan Phan <tphan@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
|
|
Create a helper function to query whether ID_AA64MFR1_EL1 indicates
presence of the Virtualization Host Extensions. This feature is only
visible in AARCH64 state.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
|
|
The code can reach line 65 only through the else path above at line 53.
The else path already has the same NULL check at line 55 and hence the
duplicate code lines are totally redundant which can be deleted.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4220
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Co-authored-by: Veeresh Sangolli <veeresh.sangolli@dellteam.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
Line number 365 does contain a typecast with UINT32, but it is after
all the operations (16-bit left shift followed by OR'ing) are over.
To avoid any SIGN_EXTENSION, typecast the intermediate result after
16-bit left shift operation immediately with UINT32.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4209
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ranbir Singh <Ranbir.Singh3@Dell.com>
Signed-off-by: Ranbir Singh <rsingh@ventanamicro.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
|
|
FEAT_VHE, introduced in ARMv8.1, adds a virtual EL2 timer.
However, this library verifies that exactly 3 or 4 12-byte timer
interrupts are provided in input DT, ASSERTing when the new timer
is added.
Change the assert to >= 36.
Extend the current logic, also initializing PcdArmArchTimerHypVirtIntrNum
if 5 interrupts are provided.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
|
|
PcdArmArchTimerHypVirtIntrNum, defaults to 28 as defined in Arm's
Base System Architecture (current version DEN0094C 1.0C).
Relevant for systems implementing FEAT_VHE, added in ARMv8.1.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Return unsupported HTTP status code to caller so caller can handle
HTTP error status code. Current implementation only return EFI error
to caller. Without knowing the HTTP status code, caller has trouble
to handle HTTP request failure.
Signed-off-by: Nickle Wang <nicklew@nvidia.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Cc: Mike Maslenkin <mike.maslenkin@gmail.com>
Reviewed-by: Igor Kulchytskyy <igork@ami.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Acked-by: Mike Maslenkin <mike.maslenkin@gmail.com>
|
|
Adds a plugin that finds debug macro formatting issues. These errors
often creep into debug prints in error conditions not frequently
executed and make debug more difficult when they are encountered.
The code can be as a standalone script which is useful to find
problems in a large codebase that has not been checked before or as
a build plugin that notifies a developer of an error right away.
The script was already used to find numerous issues in edk2 in the
past so there's not many code fixes in this change. More details
are available in the readme file:
.pytool\Plugin\DebugMacroCheck\Readme.md
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
Disables the DebugMacroCheck CI plugin to reduce CI checks performed
in the package.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
|
|
Adds a CI YAML entry to acknowledge a case where custom strings
contain print specifiers for a single debug macro.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
Adds a CI YAML entry to acknowledge a case where a macro is expanded
that contains a print specifier.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
Adds a CI YAML entry to acknowledge a case where a single argument
is matched to a format specifier with a ternary operator.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
|
|
regex is a popular PIP module for regular expression support.
https://pypi.org/project/regex/
This change adds regex for the upcoming DebugMacroCheck plugin.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
Some macros added have a mismatched number of print specifiers to
arguments.
Cc: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
|
|
When finding a free page range for allocation, if the found range
starts below the tracked memory bin address range, the lowest
memory bin address is updated which will not include the guard page if
present. When CoreConvertPagesWithGuard() is called on the range
being allocated, the memory range is adjusted to include guard
pages which can push it out of the memory bin address range and
cause the memory type statistics to be unaltered.
This patch updates the lowest memory bin address range to account for
the guard page if NeedGuard is TRUE so the memory type statistics
are updated correctly.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4494
Current reset vector uses 0xffffffe0 as AP waking vector, and expects
GenFv generates code aligned on a 4k boundary which will jump to this
location. However, some issues are listed below
1. GenFV doesn't generate code as the comment expects, because GenFv
assumes no modifications are required to the VTF-0 'Volume Top File'.
2. Even if removing VFT0 signature and let GenFv to modify, Genfv is
hard-code using another flash address 0xffffffd0.
3. In the same patch series, AP waking vector code is removed from
GenFv, because no such usage anymore. The existing of first two issues
also approve the usage is not available for a long time.
Therefore, remove AP waking vector related code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4494
Current reset vector uses 0xffffffe0 as AP waking vector, and expects
GenFv generates code aligned on a 4k boundary which will jump to this
location. However, some issues are listed below
1. GenFV doesn't generate code as the comment expects, because GenFv
assumes no modifications are required to the VTF-0 'Volume Top File'.
2. Even if removing VFT0 signature and let GenFv to modify, Genfv is
hard-code using another flash address 0xffffffd0.
3. In the same patch series, AP waking vector code is removed from
GenFv, because no such usage anymore. The existing of first two issues
also approve the usage is not available for a long time.
Therefore, remove AP waking vector related code.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4494
There are two part of AP waking Vector logic in SecCore.
The first one working with GenFv to find a free 4K aligned space,
use the 4K aligned address as AP waking Vector and jump to 4G-30h,
and finally jump to ApStartup..
The second one hard code uses 4G-1000h as AP waking Vector and
jump to ApStartup.
Both usages are no longer used. Remove them.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4494
Today for SEC core(not VTF-0), GenFv finds free 4K aligned space in
FV for AP waking vector and JMP to 4G-30h in the waking vector.
There is no usage of this today. Remove the logic to avoid confusing
and save spaces in reset vector.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
|
