Age | Commit message (Collapse) | Author | Files | Lines |
|
The guest os which depends on vbeshim for video support is -- according
to the comments -- Windows 2008 R2. Which went EOL in January 2020,
more than four years ago.
Time to retire VbeShim. RIP.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
The ESRT table is not required in UEFI firmware. In such cases, the
table may not be present in the UEFI Configuration Table. The mEsrtTable
is to check if the IsNestedFmpCapsule() function is invoked at runtime
to determine whether to use gEsrtManagementProtocolGuid or the ESRT
table from the Configuration Table. Unfortunately, the check does not
cover situations where the ESRT is not present, potentially resulting in
a kernel crash. This patch is intended to fix this issue.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
|
|
Following https://bugzilla.tianocore.org/show_bug.cgi?id=2817 this
bug could also apply to strncpy and strcat.
For strncpy use count+1 if smaller than MAX_STRING_SIZE. This still
restricts the destination size to MAX_STRING_SIZE as before but allows
a strncpy when the source is close after destination without triggering
the InternalSafeStringNoAsciiStrOverlap check in AsciiStrnCpyS.
For strcat use the destination string length + the size of the source
string including the terminator as destination size if smaller than
MAX_STRING_SIZE.
Also move both functions to CrtWrapper.c as they do not return the
correct return value. AsciiStrnCpyS and AsciiStrCatS return
RETURN_VALUE instead of a char * to the destination buffer.
Signed-off-by: Sebastian Witt <sebastian.witt@siemens.com>
|
|
strcpy fails when strSource is closer than 4096 bytes after strDest.
This is caused by an overlap check in AsciiStrCpyS:
//
// 5. Copying shall not take place between objects that overlap.
//
SAFE_STRING_CONSTRAINT_CHECK (InternalSafeStringNoAsciiStrOverlap
(Destination, DestMax, (CHAR8 *)Source, SourceLen + 1),
RETURN_ACCESS_DENIED);
Since DestMax is MAX_STRING_SIZE (0x1000) and with a Source
that is in this area behind Destination, AsciiStrCpyS will fail
and strcpy will do nothing.
When called by CRYPTO_strdup in openssl this leads to uninitialzed
memory that gets accessed instead of the copied string.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2817
Signed-off-by: Sebastian Witt <sebastian.witt@siemens.com>
|
|
Instead of copying from unallocated memory in RemoveTableFromRsdt, do a
CopyMem followed by ZeroMem.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4779
Refer to PCI express base specification Reversion 6.2,
table 7-23 Link Capabilities Register.
Supported Link Speeds Vector bit 5: speed 64 GT/s.
Add the support to shell command 'pci'.
Signed-off-by: HoraceX Lien <horacex.lien@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
Emit a DEBUG_WARN message if there is not enough flash space left to
write/update a variable. This condition is currently not logged
appropriately in all cases, given that full variable store can easily
render the system unbootable.
This new message helps identifying this condition.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Fix logic error that changes the commit range checked depending
on the verbosity level set.
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
REF:
https://bugzilla.tianocore.org/show_bug.cgi?id=4509
Both return 0x80 value and
Asn1Tag != V_ASN1_SEQUENCE are wrong return.
Signed-off-by: Wenxing Hou <wenxing.hou@intel.com>
|
|
If GuestPhysBits reports more than 48 phys-bits can be used allow
to go beyond that limit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add support for GuestPhysBits (cpuid 0x80000008, eax, bits 23:16).
GuestPhysBits is a field which can be set by the hypervisor to inform
the guest about the /usable/ physical address space bits. This can be
smaller than the PhysBits of the CPU, for example because of nested
paging limitations.
OVMF will read GuestPhysBits, log the value, in case it is set use it
as upper limit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
It is legal for the VarStoreId of a question to
be 0 per the UEFI spec:
"Specifies the identifier of a previously
declared variable store to use when storing the
question’s value. A value of zero indicates
no associated variable store."
Instead of hitting an assert just skip this
question as there is no value to return.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
|
|
Add dsc + fdf include files to add the MorLock drivers to the build.
Add the include files to OVMF build configurations.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The FdtNorFlashQemuLib has been enabled, remove ArmVirtPkg version.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4770
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4775
Signed-off-by: Neo Hsueh <Hong-Chih.Hsueh@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jiangang He <jiangang.he@amd.com>
|
|
Adding definitions for Ipmi Net Sensor Get/Set Thresholds commands and
structures as found in Ipmi specification v2.0
Signed-off-by: Aaron Pop <aaronpop@microsoft.com>
|
|
Enable the non-hardcode version of FdtNorFlashQemuLib in ArmVirtQemu.dsc
and ArmVirtQemuKernel.dsc, and it can work rightly after enabling it.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4770
Build-tested (with "ArmVirtQemu.dsc" and "ArmVirtQemuKernel.dsc").
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This library is copied from ArmVirtPkg, in the Arm version, the value of
PcdFlashNvStorageVariableBase, PcdFlashNvStorageFtwWorkingBase and
PcdFlashNvStorageFtwSpareBase are hardcoded in INC file.
This version will calculate them from FDT resource and using the set PCD
to store when the NorFlashInitialise is called. By default, the first
available flash(not used for storage UEFI code) as NV variable storage
medium.
In this way, UEFI can better handle the change of flash base address,
which is suitable for different cpu architecture board implementation.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4770
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Struct assignments are not permitted in EDK2, as they may be converted
by the compiler into calls to the 'memcpy' intrinsic, which is not
guaranteed to be available in EDK2.
So replace the assignment with a call to CopyMem (), and -while at it-
replace the loop with a single CopyMem () call, as the loop operates on
items that are contiguous in memory.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This patch is to fix issue when splitting leaf paging
entry in CpuPageTableLib code.
In previous code, before we assign the new child paging
structure address to the content of splitted paging entry,
PageTableLibSetPnle() is called to make sure the bit7 is
set to 0, which indicate the previous leaf entry is
changed to non-leaf entry now. There is a gap between
we change the bit7 and we assign the new child paging
structure address to the content of the splitted paging
entry. If the address of code execution or data access
happens to be in the range covered by the splitted paging
entry, this gap may cause issue.
In this patch, we prepare the new paging entry content
value in a local variable and assign the value to the
splitted paging entry at once. The volatile keyword
is used to ensure that no optimization will occur in
compilation.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Zhou Jianfeng <jianfeng.zhou@intel.com>
|
|
Remove GetAcpiCpuData() in CpuS3.c. The mAcpiCpuData
is not needed in S3 boot anymore.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
This MpService2Ppi field in SMM_S3_RESUME_STATE is used to
wakeup AP to do the CPU initialization during smm s3 boot when
the execution mode of PEI and DXE are the same.
Currently, in CpuS3.c of smm cpu driver, BSP doesn't need to
wakeup AP anymore. The initialization for AP will be done in
S3Resume.c before transfer to CpuS3.c of smm cpu driver.
So we can remove the MpService2Ppi field in SMM_S3_RESUME_STATE.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Remove the unneeded assignment of MpService2Ppi field
in SmmS3ResumeState. Previously, when the execution
combination of PEI and DXE are the same, the pointer
of mpservice ppi will be passed to CpuS3.c in smm cpu
driver to wakeup all APs, instead of init-sipi-sipi.
Currently, CpuS3.c doesn't need to wakeup Aps anymore.
So remove the duplicated mpservice locate and assignment
to MpService2Ppi field in SmmS3ResumeState.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
After the code to load mtrr setting, set register table,
handle APIC setting and Interrupt after INIT-SIPI-SIPI
is moved, the InitializeCpuProcedure() only contains
following code logic:
1.Bsp runs ExecuteFirstSmiInit().
2.Bsp transfers AP to safe hlt-loop
During S3 boot, since APs will be relocated to new safe
buffer by the callback of gEdkiiEndOfS3ResumeGuid in
PeiMpLib, Bsp doesn't need to transfer AP to safe hlt-loop
any more. SmmRestoreCpu() in CpuS3 only needs to runs the
ExecuteFirstSmiInit() on BSP. So remove code to wakeup
AP by INIT-SIPI-SIPI and remove code to relocate ap to
safe hlt-loop.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Remove ProgramVirtualWireMode()/DisableLvtInterrupts()
since APs won't be waken by INIT-SIPI-SIPI in CpuS3.c
any more. The two functions has been executed in
MpInitLibInitialize() in PeiMplib.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
In this commit, change PeiMpLib to install callback
of gEdkiiEndOfS3ResumeGuid to relocate AP to new safe
buffer. The gEdkiiEndOfS3ResumeGuid is installed in
S3Resume.c before jmping to OS waking vector.
Previously, code in CpuS3.c of PiSmmCpuDxe driver will
prepare the new safe buffer for AP and place AP in hlt
loop state. With this code change, we can remove the
Machine Instructions of mApHltLoopCode in PiSmmCpuDxe.
Also we can reuse the related code in DxeMpLib for
PeiMpLib.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Install gEdkiiEndOfS3ResumeGuid in S3Resume to trigger
callback registered by PeiMpLib. The callback is to
relocate Ap to new safe memory before jump to OS waking
vector in S3 boot flow.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Move some code in DxeMpLib.C to common MpLib.c.
The related code is to relocate Ap to new safe buffer
before booting into OS. In next commits, these code
also will be used by PeiMpLib. This commit doesn't
change any code functionality.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Abstract some DxeMpLib code to function in this commit.
Some of these internal functions will be moved to common
MpLib.c in following commits. Then PeiMpLib can reuse
the code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Disable paging in IA32 RelocateApLoop assembly
code to fix the issue that the AP page table is
unavailiable after boot OS under IA32 execution mode.
This issue exist in IA32 PEI + IA32 DXE normal boot
(also S3 boot with IA32 PEI after previous three commits
are accepted). In current MpLib code, the IA32 execution
mode code did not create page table in reserved memory
like what X64 code did. If PcdCpuStackGuard is TRUE, the
PG is enabled for AP in current RelocateApLoop assembly
code. And the page table for AP is unavailiable after
boot OS. This might cause potential issue. So disable PG
in IA32 RelocateApLoop.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Remove code to set register table in CpuS3.c.
In previous commit, PcdCpuFeaturesInitOnS3Resume
has been set to TRUE. So that CpuFeaturesPei PEIM
will initialize the CPU registers and perform CPU
features initialization.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Set PcdCpuFeaturesInitOnS3Resume to TRUE. So that
CpuFeaturesPei PEIM will initialize the CPU registers
and perform CPU features initialization.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Remove code to load mtrr setting in CpuS3.c.
In previous commits, before transferring to
CpuS3.c, MTRR setting has been loaded in
S3RestoreConfig2() for all CPU.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
In this commit, S3Resume.c wakeup all Aps to run
LoadMtrrData for all cpu before transfer to CpuS3.c
in smm cpu driver. The MtrrSetting table can be restored
by gEdkiiS3MtrrSettingGuid which is saved by lockbox in
PEI phase. This can avoid waking up APs in CpuS3.c.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Save MTRR by lockbox in CpuS3DataDxe. In S3 boot,
The MTRR setting will be restored in S3Resume.c
in following patches. Then S3Resume.c will wakeup
all APs to load the MTRR setting. This can avoid
waking up APs in CpuS3.c.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Add locbox lib instance in DSC. The SmmLockBoxDxeLib
will be consumed by CpuS3DataDxe driver
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Save MTRR by lockbox in CpuS3DataDxe. In S3 boot,
The MTRR setting will be restored in S3Resume.c
in following patches. Then S3Resume.c will wakeup
all APs to load the MTRR setting. This can avoid
waking up APs in CpuS3.c.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Add gEdkiiS3MtrrSettingGuid a new GUID for s3
MTRR setting. This GUID will be used to save
MTRR_SETTINGS at EndOfDxe by LockBox and restore
at S3 boot PEI phase for s3 usage.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
According to the SMBIOS specification, on UEFI systems the BIOS Segment
field in the Type 0 table isn't relevant and should be set to 0.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
|
|
This facilitates RSA extension, PKCS7 sign, and bignum function to
broaden the range of algorithms available in SMM/StandaloneMM for
platform utilization.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
|
|
Add a new entry into GCD attribute conversion table to convert
EFI_RESOURCE_ATTRIBUTE_SPECIAL_PURPOSE to EFI_MEMORY_SP.
Signed-off-by: Du Lin <du.lin@intel.com>
|
|
Add a 'Ready' boolean to the driver state struct, use it to track
whenever the device is ready to be used. In case it is not ready
throw an EFI_DEVICE_ERROR instead of sending a request which will
never receive an answer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4698
The default drbg type of randlib has been switched to aes_256_ctr in
openssl1.1.1, so sha1 is not really used in RandomSeed(). Remove related code
which do SHA-1 support checking in CryptRand.c and CryptRandTsc.c to avoid
potential compatibility errors.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Shang Qingyu <qingyu.shang@intel.com>
Reviewed-by: Yi Li <yi1.li@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4509
CryptX509.c file has X509GetTBSCert() funtion and it is added Inf variable
to collect the return value of ASN1_get_object(), which return 0x80 in error
case. Supplement the return value check during the second function call
and correct the check logic.
Signed-off-by: Qingyu <qingyu.shang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Yi Li <yi1.li@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4739
AES256-SHA256 is a Tls1.2 suite we need to support, add it to deflt_ciphers
in OpensslStub.
Signed-off-by: Shang Qingyu <qingyu.shang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Yi Li <yi1.li@intel.com>
|
|
Bumps [edk2-pytool-extensions](https://github.com/tianocore/edk2-pytool-extensions) from 0.26.4 to 0.27.5.
- [Release notes](https://github.com/tianocore/edk2-pytool-extensions/releases)
- [Commits](https://github.com/tianocore/edk2-pytool-extensions/compare/v0.26.4...v0.27.5)
---
updated-dependencies:
- dependency-name: edk2-pytool-extensions
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
|
|
Bumps [edk2-pytool-library](https://github.com/tianocore/edk2-pytool-library) from 0.20.0 to 0.21.5.
- [Release notes](https://github.com/tianocore/edk2-pytool-library/releases)
- [Commits](https://github.com/tianocore/edk2-pytool-library/compare/v0.20.0...v0.21.5)
---
updated-dependencies:
- dependency-name: edk2-pytool-library
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
|
|
This bug fix is based on the following commit "NetworkPkg TcpDxe: SECURITY PATCH"
REF: 1904a64
Issue Description:
An "Invalid handle" error was detected during runtime when attempting to destroy a child instance of the hashing protocol. The problematic code segment was:
NetworkPkg\TcpDxe\TcpDriver.c
Status = Hash2ServiceBinding->DestroyChild(Hash2ServiceBinding, &mHash2ServiceHandle);
Root Cause Analysis:
The root cause of the error was the passing of an incorrect parameter type, a pointer to an EFI_HANDLE instead of an EFI_HANDLE itself, to the DestroyChild function. This mismatch resulted in the function receiving an invalid handle.
Implemented Solution:
To resolve this issue, the function call was corrected to pass mHash2ServiceHandle directly:
NetworkPkg\TcpDxe\TcpDriver.c
Status = Hash2ServiceBinding->DestroyChild(Hash2ServiceBinding, mHash2ServiceHandle);
This modification ensures the correct handle type is used, effectively rectifying the "Invalid handle" error.
Verification:
Testing has been conducted, confirming the efficacy of the fix. Additionally, the BIOS can boot into the OS in an iPXE environment.
Cc: Doug Flick [MSFT] <doug.edk2@gmail.com>
Signed-off-by: Sam Tsai [Wiwynn] <sam_tsai@wiwynn.com>
Reviewed-by: Saloni Kasbekar <saloni.kasbekar@intel.com>
|
|
Bumps [regex](https://github.com/mrabarnett/mrab-regex) from 2023.12.25 to 2024.5.15.
- [Changelog](https://github.com/mrabarnett/mrab-regex/blob/hg/changelog.txt)
- [Commits](https://github.com/mrabarnett/mrab-regex/compare/2023.12.25...2024.5.15)
---
updated-dependencies:
- dependency-name: regex
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
|
|
Encrypted and Special Purpose resource attributes are introduced in
PI 1.8 Specification. This patch is to update VMM Hob list integrity
check to recognize these resource attributes.
Signed-off-by: Du Lin <du.lin@intel.com>
|