summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-05-05OvmfPkg/MptScsiDxe: Initialize hardwareNikita Leshenko2-1/+325
Reset and send the IO controller initialization request. The reply is read back to complete the doorbell function but it isn't useful to us because it doesn't contain relevant data or status codes. See "LSI53C1030 PCI-X to Dual Channel Ultra320 SCSI Multifunction Controller" technical manual for more information. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Message-Id: <20200504210607.144434-11-nikita.leshchenko@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-05-05OvmfPkg/MptScsiDxe: Set and restore PCI attributesNikita Leshenko1-1/+64
Enable the IO Space and Bus Mastering and restore the original values when the device is stopped. This is a standard procedure in PCI drivers. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200504210607.144434-10-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg/MptScsiDxe: Open PciIo protocol for later useNikita Leshenko1-1/+29
This will give us an exclusive access to the PciIo of this device after it was started and until is will be stopped. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200504210607.144434-9-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg/MptScsiDxe: Build and decode DevicePathNikita Leshenko1-2/+59
Used to identify the individual disks in the hardware tree. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200504210607.144434-8-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg/MptScsiDxe: Report targets and one LUNNikita Leshenko3-2/+70
The controller supports up to 8 targets in practice (Not reported by the controller, but based on the implementation of the virtual device), report them in GetNextTarget and GetNextTargetLun. The firmware will then try to communicate with them and create a block device for each one that responds. Support for multiple LUNs will be implemented in another series. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200504210607.144434-7-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg/MptScsiDxe: Install stubbed EXT_SCSI_PASS_THRUNikita Leshenko2-3/+183
Support dynamic insertion and removal of the protocol Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200504210607.144434-6-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg/MptScsiDxe: Probe PCI devices and look for MptScsiNikita Leshenko3-1/+76
The MptScsiControllerSupported function is called on handles passed in by the ConnectController() boot service and if the handle is the lsi53c1030 controller the function would return success. A successful return value will attach our driver to the device. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Message-Id: <20200504210607.144434-5-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg/MptScsiDxe: Report name of driverNikita Leshenko1-2/+59
Install Component Name protocols to have a nice display name for the driver in places such as UEFI shell. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Message-Id: <20200504210607.144434-4-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg/MptScsiDxe: Install DriverBinding ProtocolNikita Leshenko2-1/+67
In order to probe and connect to the MptScsi device we need this protocol. Currently it does nothing. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Message-Id: <20200504210607.144434-3-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg/MptScsiDxe: Create empty driverNikita Leshenko9-1/+75
In preparation for implementing LSI Fusion MPT SCSI devices, create a basic scaffolding for a driver. Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390 Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200504210607.144434-2-nikita.leshchenko@oracle.com>
2020-05-05OvmfPkg: Add BaseResetSystemLibBhyveRebecca Cran3-0/+76
Introduce BaseResetSystemLibBhyve.inf, to support powering off bhyve guests. Signed-off-by: Rebecca Cran <rebecca@bsdio.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Message-Id: <20200504021853.76658-1-rebecca@bsdio.com> [lersek@redhat.com: MODULE_TYPE: replace DXE_DRIVER with BASE] [lersek@redhat.com: replace <OvmfPlatforms.h> with <IndustryStandard/Bhyve.h>] [lersek@redhat.com: strip ".inf" from subject line] Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-05-05OvmfPkg: Add QemuFwCfgLibNullRebecca Cran2-0/+239
Add a null implementation library for QemuFwCfgLib, in order to support building PciHostBridgeLib for bhyve. Signed-off-by: Rebecca Cran <rebecca@bsdio.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200503230910.26783-1-rebecca@bsdio.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-05-05ArmPlatformPkg: remove PL180 SD controller driverArd Biesheuvel5-776/+0
The PL180 SD host controller driver is only used on emulated ARM platforms, uses an obsolete version of the MMC host protocol and does not adhere to the UEFI driver model. It has been moved into edk2-platforms alongside the only platforms that use it, so we can drop it from the EDK2 core repository. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-05-05EmbeddedPkg: remove ISP 1716 USB host controller driverArd Biesheuvel4-786/+0
The ISP 1716 USB host controller driver does not implement the UEFI driver model, and is not a suitable example for new drivers to be based on. Also, it is currently only used on a limited set of ARM development platforms. Due to this, it has been moved into the edk2-platforms repository, alongside its remaining users, which have been updated to refer to it in its new location. So drop this version from EmbeddedPkg. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-05-05EmbeddedPkg: remove SiI3132 SATA controller driverArd Biesheuvel6-1862/+0
The SiI3132 SATA controller driver does not implement the UEFI driver model, and is not a suitable example for new drivers to be based on. Also, it is currently only used on a limited set of ARM development platforms. Due to this, it has been moved into the edk2-platforms repository, alongside its remaining users, which have been updated to refer to it in its new location. So drop this version from EmbeddedPkg. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-05-05EmbeddedPkg: remove Lan9118 network controller driverArd Biesheuvel7-3590/+0
The Lan9118 network controller driver does not implement the UEFI driver model, and is not a suitable example for new drivers to be based on. Also, it is currently only used on a limited set of ARM development platforms. Due to this, it has been moved into the edk2-platforms repository, alongside its remaining users, which have been updated to refer to it in its new location. So drop this version from EmbeddedPkg. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-05-05EmbeddedPkg: remove Lan91x network controller driverArd Biesheuvel4-2556/+0
The Lan91x network controller driver does not implement the UEFI driver model, and is not a suitable example for new drivers to be based on. Also, it is currently only used on a limited set of ARM development platforms. Due to this, it has been moved into the edk2-platforms repository, alongside its remaining users, which have been updated to refer to it in its new location. So drop this version from EmbeddedPkg. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-05-05EmbeddedPkg: remove DwEmmcDxe host controller driverArd Biesheuvel4-870/+0
The Synopsys DesignWare eMMC host controller driver does not implement that SD/MMC host controller protocol that the UEFI spec defines, but an obsolete EDK2-specific one that predates it. It also does not implement the UEFI driver model. Due to this, it has been moved into the edk2-platforms repository, alongside its remaining users, which have been updated to refer to it in its new location. So drop this version from EmbeddedPkg. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-04-30OvmfPkg: Add VBE2 mode info structure to LegacyVgaBios.hRebecca Cran1-0/+38
bhyve uses the older VESA BIOS Extensions 2.0, so add the mode info structure to IndustryStandard/LegacyVgaBios.h Signed-off-by: Rebecca Cran <rebecca@bsdio.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Message-Id: <20200430011503.613044-1-rebecca@bsdio.com>
2020-04-30OvmfPkg: Add bhyve support into AcpiTimerLibRebecca Cran4-0/+79
On bhyve, the ACPI timer is located at a fixed IO address; it need not be programmed into, nor fetched from, the PMBA -- power management base address -- register of the PCI host bridge. Signed-off-by: Rebecca Cran <rebecca@bsdio.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Message-Id: <20200430011212.612386-1-rebecca@bsdio.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-04-30OvmfPkg: replace old EFI_D_ debug levels with new DEBUG_ onesRebecca Cran64-357/+357
Generated mechanically with: find OvmfPkg -type f -exec sed -i -e 's/EFI_D_/DEBUG_/g' {} \; Signed-off-by: Rebecca Cran <rebecca@bsdio.com> Cc: Philippe Mathieu-Daude <philmd@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200429215327.606467-1-rebecca@bsdio.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-04-30EmbeddedPkg: rename gEfiMmcHostProtocolGuid to gEmbeddedMmcHostProtocolGuidArd Biesheuvel8-13/+13
In EDK2, identifiers carrying the EFI prefix are reserved for ones that are defined in the UEFI or PI specifications. Since the MMC host protocol defined in EmbeddedPkg is not the one that the UEFI spec defines, and given the confusion around this, let's rename it to from gEfiMmcHostProtocolGuid to gEmbeddedMmcHostProtocolGuid. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-04-30MdeModulePkg/DeviceManagerUiLib: connect all before creating menu pageArd Biesheuvel3-0/+9
The device manager UI library creates a UiApp submenu that contains a list of network devices in the system. The logic that creates this menu assumes that all handles have been connected to their drivers, but this is not guaranteed in the general case: due to the way UiApp is constructed, this logic runs before the UiApp entrypoint is invoked, which is where ConnectAll() is normally called to ensure that all existing controllers are connected to their drivers. Moving this call into DeviceManagerUiLib is not an option, since it is incorporated into UiApp via NULL library class resolution, and so it may not be included to begin with. So work around this by doing an explicit additional ConnectAll() before populating the pages. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Link: https://edk2.groups.io/g/devel/topic/72879609#57075 Reviewed-by: Dandan Bi <dandan.bi@intel.com>
2020-04-30UefiCpuPkg/MpInitLib: Avoid ApInitReconfig in PEI.Dong, Eric1-2/+11
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2683 In PEI phase, AP already been waked up through ApInitConfig, so it can directly wake up it through change wakup buffer instead of use ApInitReconfig flag. It can save some time. Change code to only use ApInitReconfig flag in DXE phase which must need to update the wake up buffer. Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Cc: Chandana Kumar <chandana.c.kumar@intel.com> Signed-off-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
2020-04-30UefiCpuPkg/MpInitLib: Restore IDT context for APs.Eric Dong1-11/+23
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2683 This patch fixes an assertion because AP can't find the CpuMpData. When AP is waken up through Init-Sipi-Sipi, AP's IDT should be restored to pre-allocated buffer so AP can get the CpuMpData through the IDT base address. Current code already has logic to handle this when CpuMpData-> InitFlag is ApInitConfig but misses the logic when CpuMpData->InitFlag is ApInitReconfig. This patch fixes this gap. Reviewed-by: Ray Ni <ray.ni@intel.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com> Cc: Chandana Kumar <chandana.c.kumar@intel.com> Signed-off-by: Eric Dong <eric.dong@intel.com>
2020-04-29.gitmodules: ignore untracked files in brotliZhang, Shenglei1-0/+1
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2692 BrotliCompress submodule change for BaseTools causes untracked files in BaseTools after building. This is regression for git. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-04-29BaseTools: BaseTools changes for RISC-V platform.Abner Chang2-4/+7
Python code changes for building EDK2 RISC-V platform. Signed-off-by: Abner Chang <abner.chang@hpe.com> Co-authored-by: Gilbert Chen <gilbert.chen@hpe.com> Co-authored-by: Daniel Helmut Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Bob Feng <bob.c.feng@intel.com> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Gilbert Chen <gilbert.chen@hpe.com>
2020-04-29BaseTools: BaseTools changes for RISC-V platform.Abner Chang1-2/+51
Tools definitions template file changes for building EDK2 RISC-V platform. Signed-off-by: Abner Chang <abner.chang@hpe.com> Co-authored-by: Gilbert Chen <gilbert.chen@hpe.com> Co-authored-by: Daniel Helmut Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Bob Feng <bob.c.feng@intel.com> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Gilbert Chen <gilbert.chen@hpe.com>
2020-04-29BaseTools: BaseTools changes for RISC-V platform.Abner Chang8-13/+580
C code changes for building EDK2 RISC-V platform. Signed-off-by: Abner Chang <abner.chang@hpe.com> Co-authored-by: Gilbert Chen <gilbert.chen@hpe.com> Co-authored-by: Daniel Helmut Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Bob Feng <bob.c.feng@intel.com> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Gilbert Chen <gilbert.chen@hpe.com>
2020-04-28ArmVirtPkg: control PXEv4 / PXEv6 boot support from the QEMU command lineLaszlo Ersek2-0/+26
Port the DSC file changes from the similarly titled OvmfPkg patch in this series to ArmVirtPkg. Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Per Sundstrom <per_sundstrom@yahoo.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200424075353.8489-8-lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-28ArmVirtPkg/QemuFwCfgLib: allow UEFI_DRIVER modulesLaszlo Ersek1-1/+1
We don't distribute UEFI_DRIVER modules stand-alone that were built as part of an ArmVirtQemu* platform. ArmVirtQemu* UEFI_DRIVERs are allowed to inherit platform dependencies. By enabling UEFI_DRIVERs to consume QemuFwCfgLib, we can hook fw_cfg-based NULL class libraries into UEFI drivers, e.g. in order to set dynamic PCDs. Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Per Sundstrom <per_sundstrom@yahoo.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200424075353.8489-7-lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-28OvmfPkg: control PXEv4 / PXEv6 boot support from the QEMU command lineLaszlo Ersek5-0/+100
Add a minimal, NULL class library called "PxeBcPcdProducerLib" for setting the "PcdIPv4PXESupport" and "PcdIPv6PXESupport" PCDs of NetworkPkg, from fw_cfg. These PCDs control whether the UefiPxeBcDxe driver supports PXEv4 / PXEv6 boot. If a PXE version is disabled, the corresponding LoadFile protocol instance is not produced by UefiPxeBcDxe, and so EfiBootManagerRefreshAllBootOption() in UefiBootManagerLib does not generate corresponding *new* boot options either. (Existent boot options are not deleted.) Hook the library into the UefiPxeBcDxe driver. (The driver is already included from "NetworkComponents.dsc.inc", but we can list it again in the DSC file, for providing <LibraryClasses> overrides.) In OVMF, the PCDs could be set in PlatformPei too, but ArmVirtQemu does not have fw_cfg access in the PEI phase. Hence a NULL class library that can be linked into UefiPxeBcDxe. When listing the PCDs under [PcdsDynamicDefault], stick with the DEC default values. QEMU switches: -fw_cfg name=opt/org.tianocore/IPv4PXESupport,string=[yn] -fw_cfg name=opt/org.tianocore/IPv6PXESupport,string=[yn] The "opt/org.tianocore" prefix follows the "opt/RFQDN/" recommendation from QEMU's "docs/specs/fw_cfg.txt". Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Per Sundstrom <per_sundstrom@yahoo.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200424075353.8489-6-lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-28OvmfPkg/QemuFwCfgDxeLib: allow UEFI_DRIVER modulesLaszlo Ersek1-1/+1
We don't distribute UEFI_DRIVER modules stand-alone that were built as part of an OVMF platform. OVMF's UEFI_DRIVERs are allowed to inherit platform dependencies. By enabling UEFI_DRIVERs to consume QemuFwCfgDxeLib, we can hook fw_cfg-based NULL class libraries into UEFI drivers, e.g. in order to set dynamic PCDs. Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Per Sundstrom <per_sundstrom@yahoo.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200424075353.8489-5-lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-28OvmfPkg/PlatformPei: use QemuFwCfgParseBool in UPDATE_BOOLEAN_PCD_FROM_...Laszlo Ersek1-45/+2
The UPDATE_BOOLEAN_PCD_FROM_FW_CFG() macro currently calls the module-private helper function GetNamedFwCfgBoolean(). Replace the latter with QemuFwCfgParseBool() from QemuFwCfgSimpleParserLib. This change is compatible with valid strings accepted previously. Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Per Sundstrom <per_sundstrom@yahoo.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200424075353.8489-4-lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-04-28OvmfPkg/PlatformPei: parse "X-PciMmio64Mb" with QemuFwCfgSimpleParserLibLaszlo Ersek2-15/+22
Replace the - QemuFwCfgFindFile(), - QemuFwCfgSelectItem(), - QemuFwCfgReadBytes(), - AsciiStrDecimalToUint64() sequence in the GetFirstNonAddress() function with a call to QemuFwCfgSimpleParserLib. This change is compatible with valid strings accepted previously. Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Per Sundstrom <per_sundstrom@yahoo.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200424075353.8489-3-lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-04-28OvmfPkg: introduce QemuFwCfgSimpleParserLibLaszlo Ersek7-0/+560
We already parse some boolean and integer values from named fw_cfg files (usually into PCDs), and we're going to cover more. Add a dedicated library for centralizing the parsing logic. Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Per Sundstrom <per_sundstrom@yahoo.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200424075353.8489-2-lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
2020-04-28ReadMe: Convert to rst and add Platform CI StatusSean Brogan2-235/+354
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2570 Convert workspace root Readme.md to reStructuredText ReStructuredText supports building tables with syntax that is easier to read in plain-text. Rename as ReadMe.rst. Add Platform CI Status Tables Cc: Andrew Fish <afish@apple.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com>
2020-04-28OvmfPkg/OvmfXen: Introduce DEBUG_ON_HYPERVISOR_CONSOLE build flagAnthony PERARD1-0/+11
Introduce DEBUG_ON_HYPERVISOR_CONSOLE build flag to enable logging debug output to the Xen console. This will work with both Xen HVM guest and Xen PVH guest whereas the default PlatformDebugLibIoPort works only in HVM when QEMU is present. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200423095358.2518197-6-anthony.perard@citrix.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-04-28OvmfPkg/PlatformDebugLibIoPort: Introduce a Nocheck variantAnthony PERARD2-0/+73
Introduce PlatformRomDebugLibIoPortNocheck which doesn't try to detect the debug IO port. Instead, debug logs are always written to the IO port. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200423095358.2518197-5-anthony.perard@citrix.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-04-28OvmfPkg/PlatformDebugLibIoPort: factor out debug port detectionAnthony PERARD5-22/+36
Factor out debug port detection in PlatformDebugLibIoPort. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200423095358.2518197-4-anthony.perard@citrix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-04-28OvmfPkg/PlatformDebugLibIoPort: Reword QEMU to hypervisorAnthony PERARD4-4/+4
We are going to reuse PlatformDebugLibIoPort to use debug IO port from hypervisors that aren't QEMU, so reword "QEMU" to "hypervisor" in the descriptions. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200423095358.2518197-3-anthony.perard@citrix.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-04-28OvmfPkg/OvmfXen: Remove DEBUG_ON_SERIAL_PORTAnthony PERARD1-39/+1
Remove support for DEBUG_ON_SERIAL_PORT because OvmfXen can't be build with it due to a circular dependency: DebugLib : BaseDebugLibSerialPort -> SerialPortLib : XenConsoleSerialPortLib -> XenHypercallLib : XenHypercallLib -> DebugLib Also, if that dependency is fixed, I think it would be harder to find which console the debug is sent to when running an HVM guest. The xen console isn't the serial console used by default. Furthermore, XenHypercallLib isn't initialised early enough, so we would loose debug output from the SEC phase and early PEI phase. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200423095358.2518197-2-anthony.perard@citrix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-28.azurepipelines: Update Core CI build matrix to include platformsSean Brogan1-0/+5
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2570 Add ArmVirtPkg to Core CI matrix Add EmulatorPkg to Core CI matrix Add OvmfPkg to Core CI matrix Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
2020-04-28.pytool: Update CI Settings to support Emulator, ArmVirt, and Ovmf packagesSean Brogan3-8/+23
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2570 Update pytools configuration to enable EmulatorPkg, ArmVirtPkg, and OvmfPkg. Update documentation for the status of those packages. Remove future work items that are now complete. Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
2020-04-28OvmfPkg: Add Platform CI and configuration for Core CISean Brogan6-0/+766
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2570 Add new Azure Pipeline definitions to build and run OvmfPkg with: * Ubuntu GCC5 * Windows VS2019 Add PyTool based build of OvmfPkg Add extdep for managing the iasl dependency Add OvmfPkg.ci.yaml for Core CI Add ReadMe.md for details and instructions Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
2020-04-28EmulatorPkg: Add Platform CI and configuration for Core CISean Brogan5-0/+665
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2570 Add new Azure Pipeline definitions to build and run EmulatorPkg with: * Ubuntu GCC5 * Windows VS2019 Add PyTool based build of EmulatorPkg Add EmulatorPkg.ci.yaml for Core CI Add ReadMe.md for details and instructions Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Acked-by: Ray Ni <ray.ni@intel.com>
2020-04-28ArmVirtPkg: Add Platform CI and configuration for Core CISean Brogan5-0/+614
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2570 Add new Azure Pipeline definitions to build and run ArmVirtPkg with: * Ubuntu GCC5 Add PyTool based build of ArmVirtPkg Add extdep for managing the iasl dependency Add ArmVirtPkg.ci.yaml for Core CI Add ReadMe.md for details and instructions Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@arm.com> Cc: Leif Lindholm <leif@nuviainc.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
2020-04-28.azurepipelines: Add Platform CI templateSean Brogan3-0/+243
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2570 Add template for Platform CI steps for a Pytools based build. Add README to describe the template and how to use it. Add helpful information for working with azurepipelines, templates, and lessons learned. Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
2020-04-26NetworkPkg/IScsiDxe: Enhance the check for array boundaryShenglei Zhang2-2/+2
Array 'TargetUrl' of size 255 may use index value(s) 255 and 256. So enhance the boundary check to ensure the index is valid. Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com> Cc: Jiaxin Wu <jiaxin.wu@intel.com> Cc: Siyuan Fu <siyuan.fu@intel.com> Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
2020-04-26UnitTestFrameworkPkg/UnitTestLib: Correct dereferred pointerkuqin1-3/+1
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2609 SavedState is not sticky, copied pointer update will not change source pointer Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <Bret.Barkelew@microsoft.com> Signed-off-by: Guomin Jiang <guomin.jiang@intel.com> Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
generated by cgit v1.1 at 2024-10-10 15:16:48 +0000