| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
Since BaseLib API AsmLfence() is a x86 arch specific API and should be
avoided using in generic codes, this commit replaces the usage of
AsmLfence() with arch-generic API SpeculationBarrier().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
X86 specific BaseLib API AsmLfence() was introduced to address the Spectre
Variant 1 (CVE-2017-5753) issue. The purpose of this API is to insert
barriers to stop speculative execution. However, the API is highly
architecture (X86) specific, and thus should be avoided using across
generic code.
To address this issue, this patch will add a new BaseLib API called
SpeculationBarrier(). Different architectures will have different
implementations for this API.
For IA32 and x64, the implementation of SpeculationBarrier() will
directly call AsmLfence().
For ARM and AARCH64, this patch will add a temporary empty implementation
as a placeholder. We hope experts in ARM can help to contribute the actual
implementation.
For EBC, similar to the ARM and AARCH64 cases, a temporary empty
implementation is added.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1278
This patch is to remove the clarification about usage/difference between
those drivers in MdeModulePkg and NetworkPkg, since the MdeModulePkg one
have been deleted.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1278
This patch is to delete the UefiPxeBcDxe driver in MdeModulePkg. The
driver will not be maintained and can't co-work with the dual-stack
UefiPxeBcDxe in NetworkPkg.
People should use below NetworkPkg drivers instead:
NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe.inf
Which is actively maintained with more bug fixes and new feature support.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1278
This patch is to remove the clarification about usage/difference between
those drivers in MdeModulePkg and NetworkPkg, since the MdeModulePkg one
have been deleted.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1278
This patch is to delete the IScsiDxe driver in MdeModulePkg. The driver
will not be maintained and can't co-work with the dual-stack IScsiDxe in
NetworkPkg.
People should use below NetworkPkg drivers instead:
NetworkPkg/IScsiDxe/IScsiDxe.inf
Which is actively maintained with more bug fixes and new feature support.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1278
This patch is to remove the clarification about usage/difference between
those drivers in MdeModulePkg and NetworkPkg, since the MdeModulePkg one
have been deleted.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1278
This patch is to delete the Tcp4Dxe driver in MdeModulePkg. The driver
will not be maintained and can't co-work with the dual-stack TcpDxe in
NetworkPkg.
People should use below NetworkPkg drivers instead:
NetworkPkg/TcpDxe/TcpDxe.inf
Which is actively maintained with more bug fixes and new feature support.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
The 'arm-linux-gnueabihf' target triplet we use for CLANG35 and
CLANG38 specifies a hardfloat target, and so the binaries that are
emitted are annotated as using VFP registers for passing floating
point arguments, even though no VFP is used anywhere in the code.
This works fine as long as we don't try to link against code
that uses software floating point, but combining object files
with different floating point calling conventions is not permitted.
So switch to the softfloat arm-linux-gnueabi triplet instead.
This affects both the name Clang uses when invoking the linker,
and the arguments it passes to it, and we are mostly interested
in the latter (since any version of GNU ld.bfd will do the right
thing as long as it targets EABI ARM)
For native builds, this change has no effect, since the unprefixed
system linker will take priority, and so Clang will pass the right
arguments to whichever linker happens to be the system linker.
For cross builds, the fact that Clang composes the name of the
linker by prefixing '-ld' with the target triplet implies that
users will have to switch to a version of binutils that targets
arm-linux-gnueabi rather than arm-linux-gnueabihf. Note that the
GCCx toolchain targets can use either when building for ARM so this
does not create a need to install two versions of the ARM cross
toolchain. Also, note that all ARM toolchains in the GCC family
are already documented as requiring a toolchain that targets
arm-linux-gnueabi and not arm-linux-gnueabihf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Removing Evan and adding Alexei as the co-maintainer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1393
BZ#1089 (https://bugzilla.tianocore.org/show_bug.cgi?id=1089) requests
to upgrade the OpenSSL to the latest 1.1.1 release. Since OpenSSL-1.1.1
has many changes, more porting efforts and feature evaluation are needed.
This might lead to a situation that it cannot catch the Q1'19 stable tag.
One of the solution is upgrade current version (1.1.0h) to 1.1.0j.
According to following web page in openssl.org, all security issues
solved in 1.1.1 have been also back-ported to 1.1.0.j. This can make
sure that no security vulnerabilities left in edk2 master before 1.1.1.
https://www.openssl.org/news/vulnerabilities-1.1.1.html
Cc: Ting Ye <ting.ye@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Gang Wei <gang.wei@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
|
|
*Excpetion* should be *Exception*
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
CC: Eric Dong <eric.dong@intel.com>
CC: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
|
|
Use an untyped PCD reference for PcdSerialRegisterBase, so that the
library gets built without hardcoded values, permitting modules to
override the default serial port. This allows SerialDxe to use a
different serial port from the one used for DEBUG output (which
often gets occluded due to the console driver clearing the screen).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1364
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
|
|
Even though UEFI does not appear to use it, let's implement the
complete PI watchdog protocol, including handler registration,
which will be invoked before the ResetSystem() runtime service
when the watchdog timer expires.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Clean up the code, by adding missing STATIC modifiers, drop
redundant casts, and get rid of the 'success handling' anti
pattern in the entry point code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The SP805 watchdog driver doesn't implement the PI watchdog protocol
fully, but always simply resets the system if the watchdog time runs
out.
However, the hardware does support the intended usage model, as long
as the SP805 is wired up correctly. So let's implement interrupt based
mode involving a handler that is registered by the DXE core and invoked
when the watchdog runs out. In the interrupt handler, we invoke the
notify function if one was registered, before calling the ResetSystem()
runtime service (as per the UEFI spec)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Before fixing the SP805 driver, let's clean it up a bit. No
functional changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Instead of #defining MAX_ALLOC_ADDRESS to MAX_ADDRESS as intended,
it is #defined to itself, causing all ARM builds to break.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The current ArmVirtMemoryInitPeiLib code splits the memory region passed
via PcdSystemMemoryBase/PcdSystemMemorySize in two if the region extends
beyond the MAX_ADDRESS limit. This was introduced for 32-bit ARM, which
may support more than 4 GB of physical address space, but cannot address
all of it via a 1:1 mapping, and a single region that is not mappable
in its entirety is unusable by the PEI core.
AArch64 is in a similar situation now: platforms may support more than
256 TB of physical address space, but only 256 TB is addressable by the
CPU, and so a memory region that extends from below this limit to above
it should be split.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Limit the PEI memory region so it will not extend beyond what we can
address architecturally when running with 4 KB pages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
When creating the page tables for the 1:1 mapping, ensure that we don't
attempt to map more than what is architecturally permitted when running
with 4 KB pages, which is 48 bits of VA. This will be reflected in the
value of MAX_ALLOC_ADDRESS once we override it for AArch64, so use that
macro instead of MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
Take MAX_ALLOC_ADDRESS into account in the implementation of the
page allocation routines, so that they will only return memory
that is addressable by the CPU at boot time, even if more memory
is available in the GCD memory map.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
Update the GCD memory map initialization code so it disregards
memory that is not addressable by the CPU at boot time. This
only affects the first memory descriptor that is added, other
memory descriptors are permitted that describe memory ranges
that may be accessible to the CPU itself only when executing
under the OS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
On some architectures, the maximum representable address deviates from
the virtual address range that is accessible by the firmware at boot
time. For instance, on AArch64, UEFI mandates a 4 KB page size, which
limits the address space to 48 bits, while more than that may be
populated on a particular platform, for use by the OS.
So introduce a new macro MAX_ALLOC_ADDRESS, which represent the maximum
address the firmware should take into account when allocating memory
ranges that need to be accessible by the CPU at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Ensure that we prevent the CPU from proceeding after having taken an
unhandled exception on a RELEASE build, which does not contain the
ASSERT() which ensures this on DEBUG and NOOPT builds.
Retain the code following the deadloop so that we can keep going when
running in a debugger.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The ARM linker may emit veneers, i.e., trampolines, when ordinary
direct relative branches cannot be used, e.g., for Thumb interworking
or branch targets that are out of range.
Usually, such veneers carry an absolute reference to the branch
target, which is problematic for us, since these absolute references
are not covered by annotations that are visible to GenFw in the
PE/COFF conversion, and so these absolute references are not fixed
up by the PE/COFF loader at runtime.
So switch to all ARM GNU ld toolchains to position independent veneers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The GdbDebugAgent library is unused and unmaintained, and now it
turns out it doesn't build with Clang, so let's just get rid of it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
The following Pcds
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment
remained defined, without actual users.
So get rid of them.
One reference to be deleted separately from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Fix a bug because of b3497bad1221704a5dbc5da0b10f42625f1ad2ed.
Before the patch, when GenFds fail, the build continue and return success.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
The codes have been updated to not use PcdPeiCoreMaxFvSupported,
PcdPeiCoreMaxPeimPerFv and PcdPeiCoreMaxPpiSupported, so their
statement in platform DSC could be removed.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
The codes have been updated to not use PcdPeiCoreMaxFvSupported,
PcdPeiCoreMaxPeimPerFv and PcdPeiCoreMaxPpiSupported, so their
statement in platform DSC could be removed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPpiSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in Tcg(2)Pei.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPeimPerFv in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
|
|
current edk2\BaseTools\Conf\build_rule.template, the compile of nasm
source files does not have the $(INC) support.
The '-I' option only includes the directory of the nasm source file
(${s_path}(+)). Hence, it will be impossible for nasm files to include
files outside of the nasm source file directory.
As a comparison, the compile of both .s and .asm have $(INC) support
in their compile commands.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1085
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1085
Update the build rule to:
"$(NASM)" -I${s_path}(+) $(NASM_INC) $(NASM_FLAGS)
-o $dst ${d_path}(+)${s_base}.iii
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
|
|
CharToUpper is an unused function, so it will be removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1399
v2:Update the title.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1406
This patch is going to fix the regressions that
is introduced by commit 2f818ed0fb57d98985d151781a2ce9b8683129ee
The internal array for storing the metadata info should be cached
so that the meta file is parsed only once in one build.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1390
1. support hex number for array index
2. support Non-Dynamic Pcd for array data type
3. support {} and {CODE()} for array data type
4. Change GetStructurePcdMaxSize to be a static function since it need to
be called in another static function. And this function does not depend on
it's class instance.
5. Add unittest for RemoveCComments function and
ArrayIndex regular expression.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Philippe Mathieu-Daud? <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Commit 9a67ba261fe9 ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") incorrectly added the BaseCryptLib, OpensslLib
and IntrinsicLib to "ArmVirtPkg/ArmVirtQemuKernel.dsc", it's redundant
and the library instances from "ArmVirt.dsc.inc" is already sufficient.
This patch also adjust the order of network drivers in "ArmVirtPkg/
ArmVirtQemuFvMain.fdf.inc" to make it same as the DSC file.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1394
When there is no PCI option ROM exists, today's logic still creates
virtual BAR for option ROM using Length = 0, Alignment = (-1).
It causes the final MEM32 alignment requirement is as big as
0xFFFFFFFF_FFFFFFFF.
The patch fixes this issue by only creating virtual BAR for option
ROM when there is PCI option ROM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chiu Chasel <chasel.chiu@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
required checks were not performed. Perform parameters validation in
NonDiscoverablePciDeviceDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
|
|
Our default is already armv7-a, so no need to rewrite the PLATFORM_FLAGS
for that. Also, setting -mfpu=neon is not entirely inappropriate, since
NEON is not mandatory under v7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1386
This patch is going to fix the regression issue that is
introduced by commit 72a1d77694d51914c0dd6aa97dbfa58634b0a4a5
The issue will happen in the following cases:
1. There is no Pcd value assignment in Dsc file
2. There are duplicate Pcd filed assignment
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1387
This patch is going to fix the regression issue which is
introduced by commit bf9e636605188e291d33ab694ff1c5926b6f0800.
This patch Remove the CopyDict incorrect usage for non-dict
input data. Add a check for CopyDict input.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1385
This patch is going to fix the regression issue that is
introduced by commit e6eae3b4c7b9b756263ecec79694de5f1e85b73a
and commit 0b6c5954e1d9a17e01eee7d5ef840a5b4790e2e8.
PcdNvStoreDefaultValueBuffer value is update to Vpd Info File,
but it is not update into a internal cache. This patch will
fix this incorrect value in that internal cache.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Commit 9a67ba261fe9 ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") failed to take into account that the now
unconditionally included IScsiDxe.inf from NetworkPkg requires a
resolution for TcpIoLib. Since specifying such a resolution is harmless
for platforms that have no networking enabled, let's just fix things
by dropping the conditionals around it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
