diff options
Diffstat (limited to 'OldMdePkg/Include/Uefi/EfiPxe.h')
-rw-r--r-- | OldMdePkg/Include/Uefi/EfiPxe.h | 1780 |
1 files changed, 0 insertions, 1780 deletions
diff --git a/OldMdePkg/Include/Uefi/EfiPxe.h b/OldMdePkg/Include/Uefi/EfiPxe.h deleted file mode 100644 index eadac3c..0000000 --- a/OldMdePkg/Include/Uefi/EfiPxe.h +++ /dev/null @@ -1,1780 +0,0 @@ -/** @file
- This header file contains all of the PXE type definitions,
- structure prototypes, global variables and constants that
- are needed for porting PXE to EFI.
-
- Copyright (c) 2006, Intel Corporation
- All rights reserved. This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
- Module name: EfiPxe.h
-
- @par Revision Reference:
- 32/64-bit PXE specification:
- alpha-4, 99-Dec-17
-
-**/
-
-#ifndef __EFI_PXE_H__
-#define __EFI_PXE_H__
-
-#pragma pack(1)
-
-
-
-#define PXE_BUSTYPE(a, b, c, d) \
- ( \
- (((PXE_UINT32) (d) & 0xFF) << 24) | (((PXE_UINT32) (c) & 0xFF) << 16) | (((PXE_UINT32) (b) & 0xFF) << 8) | \
- ((PXE_UINT32) (a) & 0xFF) \
- )
-
-//
-// UNDI ROM ID and devive ID signature
-//
-#define PXE_BUSTYPE_PXE PXE_BUSTYPE ('!', 'P', 'X', 'E')
-
-//
-// BUS ROM ID signatures
-//
-#define PXE_BUSTYPE_PCI PXE_BUSTYPE ('P', 'C', 'I', 'R')
-#define PXE_BUSTYPE_PC_CARD PXE_BUSTYPE ('P', 'C', 'C', 'R')
-#define PXE_BUSTYPE_USB PXE_BUSTYPE ('U', 'S', 'B', 'R')
-#define PXE_BUSTYPE_1394 PXE_BUSTYPE ('1', '3', '9', '4')
-
-#define PXE_SWAP_UINT16(n) ((((PXE_UINT16) (n) & 0x00FF) << 8) | (((PXE_UINT16) (n) & 0xFF00) >> 8))
-
-#define PXE_SWAP_UINT32(n) \
- ((((PXE_UINT32)(n) & 0x000000FF) << 24) | \
- (((PXE_UINT32)(n) & 0x0000FF00) << 8) | \
- (((PXE_UINT32)(n) & 0x00FF0000) >> 8) | \
- (((PXE_UINT32)(n) & 0xFF000000) >> 24))
-
-#define PXE_SWAP_UINT64(n) \
- ((((PXE_UINT64)(n) & 0x00000000000000FFULL) << 56) | \
- (((PXE_UINT64)(n) & 0x000000000000FF00ULL) << 40) | \
- (((PXE_UINT64)(n) & 0x0000000000FF0000ULL) << 24) | \
- (((PXE_UINT64)(n) & 0x00000000FF000000ULL) << 8) | \
- (((PXE_UINT64)(n) & 0x000000FF00000000ULL) >> 8) | \
- (((PXE_UINT64)(n) & 0x0000FF0000000000ULL) >> 24) | \
- (((PXE_UINT64)(n) & 0x00FF000000000000ULL) >> 40) | \
- (((PXE_UINT64)(n) & 0xFF00000000000000ULL) >> 56))
-
-
-#define PXE_CPBSIZE_NOT_USED 0 // zero
-#define PXE_DBSIZE_NOT_USED 0 // zero
-#define PXE_CPBADDR_NOT_USED (PXE_UINT64) 0 // zero
-#define PXE_DBADDR_NOT_USED (PXE_UINT64) 0 // zero
-#define PXE_CONST const
-
-#define PXE_VOLATILE volatile
-
-typedef VOID PXE_VOID;
-typedef UINT8 PXE_UINT8;
-typedef UINT16 PXE_UINT16;
-typedef UINT32 PXE_UINT32;
-typedef UINTN PXE_UINTN;
-
-//
-// typedef unsigned long PXE_UINT64;
-//
-typedef UINT64 PXE_UINT64;
-
-typedef PXE_UINT8 PXE_BOOL;
-#define PXE_FALSE 0 // zero
-#define PXE_TRUE (!PXE_FALSE)
-
-typedef PXE_UINT16 PXE_OPCODE;
-
-//
-// Return UNDI operational state.
-//
-#define PXE_OPCODE_GET_STATE 0x0000
-
-//
-// Change UNDI operational state from Stopped to Started.
-//
-#define PXE_OPCODE_START 0x0001
-
-//
-// Change UNDI operational state from Started to Stopped.
-//
-#define PXE_OPCODE_STOP 0x0002
-
-//
-// Get UNDI initialization information.
-//
-#define PXE_OPCODE_GET_INIT_INFO 0x0003
-
-//
-// Get NIC configuration information.
-//
-#define PXE_OPCODE_GET_CONFIG_INFO 0x0004
-
-//
-// Changed UNDI operational state from Started to Initialized.
-//
-#define PXE_OPCODE_INITIALIZE 0x0005
-
-//
-// Re-initialize the NIC H/W.
-//
-#define PXE_OPCODE_RESET 0x0006
-
-//
-// Change the UNDI operational state from Initialized to Started.
-//
-#define PXE_OPCODE_SHUTDOWN 0x0007
-
-//
-// Read & change state of external interrupt enables.
-//
-#define PXE_OPCODE_INTERRUPT_ENABLES 0x0008
-
-//
-// Read & change state of packet receive filters.
-//
-#define PXE_OPCODE_RECEIVE_FILTERS 0x0009
-
-//
-// Read & change station MAC address.
-//
-#define PXE_OPCODE_STATION_ADDRESS 0x000A
-
-//
-// Read traffic statistics.
-//
-#define PXE_OPCODE_STATISTICS 0x000B
-
-//
-// Convert multicast IP address to multicast MAC address.
-//
-#define PXE_OPCODE_MCAST_IP_TO_MAC 0x000C
-
-//
-// Read or change non-volatile storage on the NIC.
-//
-#define PXE_OPCODE_NVDATA 0x000D
-
-//
-// Get & clear interrupt status.
-//
-#define PXE_OPCODE_GET_STATUS 0x000E
-
-//
-// Fill media header in packet for transmit.
-//
-#define PXE_OPCODE_FILL_HEADER 0x000F
-
-//
-// Transmit packet(s).
-//
-#define PXE_OPCODE_TRANSMIT 0x0010
-
-//
-// Receive packet.
-//
-#define PXE_OPCODE_RECEIVE 0x0011
-
-//
-// Last valid PXE UNDI OpCode number.
-//
-#define PXE_OPCODE_LAST_VALID 0x0011
-
-typedef PXE_UINT16 PXE_OPFLAGS;
-
-#define PXE_OPFLAGS_NOT_USED 0x0000
-
-//
-// //////////////////////////////////////
-// UNDI Get State
-//
-// No OpFlags
-
-////////////////////////////////////////
-// UNDI Start
-//
-// No OpFlags
-
-////////////////////////////////////////
-// UNDI Stop
-//
-// No OpFlags
-
-////////////////////////////////////////
-// UNDI Get Init Info
-//
-// No Opflags
-
-////////////////////////////////////////
-// UNDI Get Config Info
-//
-// No Opflags
-
-////////////////////////////////////////
-// UNDI Initialize
-//
-#define PXE_OPFLAGS_INITIALIZE_CABLE_DETECT_MASK 0x0001
-#define PXE_OPFLAGS_INITIALIZE_DETECT_CABLE 0x0000
-#define PXE_OPFLAGS_INITIALIZE_DO_NOT_DETECT_CABLE 0x0001
-
-//
-// //////////////////////////////////////
-// UNDI Reset
-//
-#define PXE_OPFLAGS_RESET_DISABLE_INTERRUPTS 0x0001
-#define PXE_OPFLAGS_RESET_DISABLE_FILTERS 0x0002
-
-//
-// //////////////////////////////////////
-// UNDI Shutdown
-//
-// No OpFlags
-
-////////////////////////////////////////
-// UNDI Interrupt Enables
-//
-//
-// Select whether to enable or disable external interrupt signals.
-// Setting both enable and disable will return PXE_STATCODE_INVALID_OPFLAGS.
-//
-#define PXE_OPFLAGS_INTERRUPT_OPMASK 0xC000
-#define PXE_OPFLAGS_INTERRUPT_ENABLE 0x8000
-#define PXE_OPFLAGS_INTERRUPT_DISABLE 0x4000
-#define PXE_OPFLAGS_INTERRUPT_READ 0x0000
-
-//
-// Enable receive interrupts. An external interrupt will be generated
-// after a complete non-error packet has been received.
-//
-#define PXE_OPFLAGS_INTERRUPT_RECEIVE 0x0001
-
-//
-// Enable transmit interrupts. An external interrupt will be generated
-// after a complete non-error packet has been transmitted.
-//
-#define PXE_OPFLAGS_INTERRUPT_TRANSMIT 0x0002
-
-//
-// Enable command interrupts. An external interrupt will be generated
-// when command execution stops.
-//
-#define PXE_OPFLAGS_INTERRUPT_COMMAND 0x0004
-
-//
-// Generate software interrupt. Setting this bit generates an external
-// interrupt, if it is supported by the hardware.
-//
-#define PXE_OPFLAGS_INTERRUPT_SOFTWARE 0x0008
-
-//
-// //////////////////////////////////////
-// UNDI Receive Filters
-//
-//
-// Select whether to enable or disable receive filters.
-// Setting both enable and disable will return PXE_STATCODE_INVALID_OPCODE.
-//
-#define PXE_OPFLAGS_RECEIVE_FILTER_OPMASK 0xC000
-#define PXE_OPFLAGS_RECEIVE_FILTER_ENABLE 0x8000
-#define PXE_OPFLAGS_RECEIVE_FILTER_DISABLE 0x4000
-#define PXE_OPFLAGS_RECEIVE_FILTER_READ 0x0000
-
-//
-// To reset the contents of the multicast MAC address filter list,
-// set this OpFlag:
-//
-#define PXE_OPFLAGS_RECEIVE_FILTER_RESET_MCAST_LIST 0x2000
-
-//
-// Enable unicast packet receiving. Packets sent to the current station
-// MAC address will be received.
-//
-#define PXE_OPFLAGS_RECEIVE_FILTER_UNICAST 0x0001
-
-//
-// Enable broadcast packet receiving. Packets sent to the broadcast
-// MAC address will be received.
-//
-#define PXE_OPFLAGS_RECEIVE_FILTER_BROADCAST 0x0002
-
-//
-// Enable filtered multicast packet receiving. Packets sent to any
-// of the multicast MAC addresses in the multicast MAC address filter
-// list will be received. If the filter list is empty, no multicast
-//
-#define PXE_OPFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST 0x0004
-
-//
-// Enable promiscuous packet receiving. All packets will be received.
-//
-#define PXE_OPFLAGS_RECEIVE_FILTER_PROMISCUOUS 0x0008
-
-//
-// Enable promiscuous multicast packet receiving. All multicast
-// packets will be received.
-//
-#define PXE_OPFLAGS_RECEIVE_FILTER_ALL_MULTICAST 0x0010
-
-//
-// //////////////////////////////////////
-// UNDI Station Address
-//
-#define PXE_OPFLAGS_STATION_ADDRESS_READ 0x0000
-#define PXE_OPFLAGS_STATION_ADDRESS_WRITE 0x0000
-#define PXE_OPFLAGS_STATION_ADDRESS_RESET 0x0001
-
-//
-// //////////////////////////////////////
-// UNDI Statistics
-//
-#define PXE_OPFLAGS_STATISTICS_READ 0x0000
-#define PXE_OPFLAGS_STATISTICS_RESET 0x0001
-
-//
-// //////////////////////////////////////
-// UNDI MCast IP to MAC
-//
-//
-// Identify the type of IP address in the CPB.
-//
-#define PXE_OPFLAGS_MCAST_IP_TO_MAC_OPMASK 0x0003
-#define PXE_OPFLAGS_MCAST_IPV4_TO_MAC 0x0000
-#define PXE_OPFLAGS_MCAST_IPV6_TO_MAC 0x0001
-
-//
-// //////////////////////////////////////
-// UNDI NvData
-//
-//
-// Select the type of non-volatile data operation.
-//
-#define PXE_OPFLAGS_NVDATA_OPMASK 0x0001
-#define PXE_OPFLAGS_NVDATA_READ 0x0000
-#define PXE_OPFLAGS_NVDATA_WRITE 0x0001
-
-//
-// //////////////////////////////////////
-// UNDI Get Status
-//
-//
-// Return current interrupt status. This will also clear any interrupts
-// that are currently set. This can be used in a polling routine. The
-// interrupt flags are still set and cleared even when the interrupts
-// are disabled.
-//
-#define PXE_OPFLAGS_GET_INTERRUPT_STATUS 0x0001
-
-//
-// Return list of transmitted buffers for recycling. Transmit buffers
-// must not be changed or unallocated until they have recycled. After
-// issuing a transmit command, wait for a transmit complete interrupt.
-// When a transmit complete interrupt is received, read the transmitted
-// buffers. Do not plan on getting one buffer per interrupt. Some
-// NICs and UNDIs may transmit multiple buffers per interrupt.
-//
-#define PXE_OPFLAGS_GET_TRANSMITTED_BUFFERS 0x0002
-
-//
-// //////////////////////////////////////
-// UNDI Fill Header
-//
-#define PXE_OPFLAGS_FILL_HEADER_OPMASK 0x0001
-#define PXE_OPFLAGS_FILL_HEADER_FRAGMENTED 0x0001
-#define PXE_OPFLAGS_FILL_HEADER_WHOLE 0x0000
-
-//
-// //////////////////////////////////////
-// UNDI Transmit
-//
-//
-// S/W UNDI only. Return after the packet has been transmitted. A
-// transmit complete interrupt will still be generated and the transmit
-// buffer will have to be recycled.
-//
-#define PXE_OPFLAGS_SWUNDI_TRANSMIT_OPMASK 0x0001
-#define PXE_OPFLAGS_TRANSMIT_BLOCK 0x0001
-#define PXE_OPFLAGS_TRANSMIT_DONT_BLOCK 0x0000
-
-//
-//
-//
-#define PXE_OPFLAGS_TRANSMIT_OPMASK 0x0002
-#define PXE_OPFLAGS_TRANSMIT_FRAGMENTED 0x0002
-#define PXE_OPFLAGS_TRANSMIT_WHOLE 0x0000
-
-//
-// //////////////////////////////////////
-// UNDI Receive
-//
-// No OpFlags
-//
-typedef PXE_UINT16 PXE_STATFLAGS;
-
-#define PXE_STATFLAGS_INITIALIZE 0x0000
-
-//
-// //////////////////////////////////////
-// Common StatFlags that can be returned by all commands.
-//
-//
-// The COMMAND_COMPLETE and COMMAND_FAILED status flags must be
-// implemented by all UNDIs. COMMAND_QUEUED is only needed by UNDIs
-// that support command queuing.
-//
-#define PXE_STATFLAGS_STATUS_MASK 0xC000
-#define PXE_STATFLAGS_COMMAND_COMPLETE 0xC000
-#define PXE_STATFLAGS_COMMAND_FAILED 0x8000
-#define PXE_STATFLAGS_COMMAND_QUEUED 0x4000
-
-//
-// //////////////////////////////////////
-// UNDI Get State
-//
-#define PXE_STATFLAGS_GET_STATE_MASK 0x0003
-#define PXE_STATFLAGS_GET_STATE_INITIALIZED 0x0002
-#define PXE_STATFLAGS_GET_STATE_STARTED 0x0001
-#define PXE_STATFLAGS_GET_STATE_STOPPED 0x0000
-
-//
-// //////////////////////////////////////
-// UNDI Start
-//
-// No additional StatFlags
-
-////////////////////////////////////////
-// UNDI Get Init Info
-//
-#define PXE_STATFLAGS_CABLE_DETECT_MASK 0x0001
-#define PXE_STATFLAGS_CABLE_DETECT_NOT_SUPPORTED 0x0000
-#define PXE_STATFLAGS_CABLE_DETECT_SUPPORTED 0x0001
-
-//
-// //////////////////////////////////////
-// UNDI Initialize
-//
-#define PXE_STATFLAGS_INITIALIZED_NO_MEDIA 0x0001
-
-//
-// //////////////////////////////////////
-// UNDI Reset
-//
-#define PXE_STATFLAGS_RESET_NO_MEDIA 0x0001
-
-//
-// //////////////////////////////////////
-// UNDI Shutdown
-//
-// No additional StatFlags
-
-////////////////////////////////////////
-// UNDI Interrupt Enables
-//
-//
-// If set, receive interrupts are enabled.
-//
-#define PXE_STATFLAGS_INTERRUPT_RECEIVE 0x0001
-
-//
-// If set, transmit interrupts are enabled.
-//
-#define PXE_STATFLAGS_INTERRUPT_TRANSMIT 0x0002
-
-//
-// If set, command interrupts are enabled.
-//
-#define PXE_STATFLAGS_INTERRUPT_COMMAND 0x0004
-
-//
-// //////////////////////////////////////
-// UNDI Receive Filters
-//
-//
-// If set, unicast packets will be received.
-//
-#define PXE_STATFLAGS_RECEIVE_FILTER_UNICAST 0x0001
-
-//
-// If set, broadcast packets will be received.
-//
-#define PXE_STATFLAGS_RECEIVE_FILTER_BROADCAST 0x0002
-
-//
-// If set, multicast packets that match up with the multicast address
-// filter list will be received.
-//
-#define PXE_STATFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST 0x0004
-
-//
-// If set, all packets will be received.
-//
-#define PXE_STATFLAGS_RECEIVE_FILTER_PROMISCUOUS 0x0008
-
-//
-// If set, all multicast packets will be received.
-//
-#define PXE_STATFLAGS_RECEIVE_FILTER_ALL_MULTICAST 0x0010
-
-//
-// //////////////////////////////////////
-// UNDI Station Address
-//
-// No additional StatFlags
-
-////////////////////////////////////////
-// UNDI Statistics
-//
-// No additional StatFlags
-
-////////////////////////////////////////
-// UNDI MCast IP to MAC
-//
-// No additional StatFlags
-
-////////////////////////////////////////
-// UNDI NvData
-//
-// No additional StatFlags
-
-
-////////////////////////////////////////
-// UNDI Get Status
-//
-//
-// Use to determine if an interrupt has occurred.
-//
-#define PXE_STATFLAGS_GET_STATUS_INTERRUPT_MASK 0x000F
-#define PXE_STATFLAGS_GET_STATUS_NO_INTERRUPTS 0x0000
-
-//
-// If set, at least one receive interrupt occurred.
-//
-#define PXE_STATFLAGS_GET_STATUS_RECEIVE 0x0001
-
-//
-// If set, at least one transmit interrupt occurred.
-//
-#define PXE_STATFLAGS_GET_STATUS_TRANSMIT 0x0002
-
-//
-// If set, at least one command interrupt occurred.
-//
-#define PXE_STATFLAGS_GET_STATUS_COMMAND 0x0004
-
-//
-// If set, at least one software interrupt occurred.
-//
-#define PXE_STATFLAGS_GET_STATUS_SOFTWARE 0x0008
-
-//
-// This flag is set if the transmitted buffer queue is empty. This flag
-// will be set if all transmitted buffer addresses get written into the DB.
-//
-#define PXE_STATFLAGS_GET_STATUS_TXBUF_QUEUE_EMPTY 0x0010
-
-//
-// This flag is set if no transmitted buffer addresses were written
-// into the DB. (This could be because DBsize was too small.)
-//
-#define PXE_STATFLAGS_GET_STATUS_NO_TXBUFS_WRITTEN 0x0020
-
-//
-// //////////////////////////////////////
-// UNDI Fill Header
-//
-// No additional StatFlags
-
-////////////////////////////////////////
-// UNDI Transmit
-//
-// No additional StatFlags.
-
-////////////////////////////////////////
-// UNDI Receive
-//
-// No additional StatFlags.
-//
-typedef PXE_UINT16 PXE_STATCODE;
-
-#define PXE_STATCODE_INITIALIZE 0x0000
-
-//
-// //////////////////////////////////////
-// Common StatCodes returned by all UNDI commands, UNDI protocol functions
-// and BC protocol functions.
-//
-#define PXE_STATCODE_SUCCESS 0x0000
-
-#define PXE_STATCODE_INVALID_CDB 0x0001
-#define PXE_STATCODE_INVALID_CPB 0x0002
-#define PXE_STATCODE_BUSY 0x0003
-#define PXE_STATCODE_QUEUE_FULL 0x0004
-#define PXE_STATCODE_ALREADY_STARTED 0x0005
-#define PXE_STATCODE_NOT_STARTED 0x0006
-#define PXE_STATCODE_NOT_SHUTDOWN 0x0007
-#define PXE_STATCODE_ALREADY_INITIALIZED 0x0008
-#define PXE_STATCODE_NOT_INITIALIZED 0x0009
-#define PXE_STATCODE_DEVICE_FAILURE 0x000A
-#define PXE_STATCODE_NVDATA_FAILURE 0x000B
-#define PXE_STATCODE_UNSUPPORTED 0x000C
-#define PXE_STATCODE_BUFFER_FULL 0x000D
-#define PXE_STATCODE_INVALID_PARAMETER 0x000E
-#define PXE_STATCODE_INVALID_UNDI 0x000F
-#define PXE_STATCODE_IPV4_NOT_SUPPORTED 0x0010
-#define PXE_STATCODE_IPV6_NOT_SUPPORTED 0x0011
-#define PXE_STATCODE_NOT_ENOUGH_MEMORY 0x0012
-#define PXE_STATCODE_NO_DATA 0x0013
-
-typedef PXE_UINT16 PXE_IFNUM;
-
-//
-// This interface number must be passed to the S/W UNDI Start command.
-//
-#define PXE_IFNUM_START 0x0000
-
-//
-// This interface number is returned by the S/W UNDI Get State and
-// Start commands if information in the CDB, CPB or DB is invalid.
-//
-#define PXE_IFNUM_INVALID 0x0000
-
-typedef PXE_UINT16 PXE_CONTROL;
-
-//
-// Setting this flag directs the UNDI to queue this command for later
-// execution if the UNDI is busy and it supports command queuing.
-// If queuing is not supported, a PXE_STATCODE_INVALID_CONTROL error
-// is returned. If the queue is full, a PXE_STATCODE_CDB_QUEUE_FULL
-// error is returned.
-//
-#define PXE_CONTROL_QUEUE_IF_BUSY 0x0002
-
-//
-// These two bit values are used to determine if there are more UNDI
-// CDB structures following this one. If the link bit is set, there
-// must be a CDB structure following this one. Execution will start
-// on the next CDB structure as soon as this one completes successfully.
-// If an error is generated by this command, execution will stop.
-//
-#define PXE_CONTROL_LINK 0x0001
-#define PXE_CONTROL_LAST_CDB_IN_LIST 0x0000
-
-typedef PXE_UINT8 PXE_FRAME_TYPE;
-
-#define PXE_FRAME_TYPE_NONE 0x00
-#define PXE_FRAME_TYPE_UNICAST 0x01
-#define PXE_FRAME_TYPE_BROADCAST 0x02
-#define PXE_FRAME_TYPE_FILTERED_MULTICAST 0x03
-#define PXE_FRAME_TYPE_PROMISCUOUS 0x04
-#define PXE_FRAME_TYPE_PROMISCUOUS_MULTICAST 0x05
-
-#define PXE_FRAME_TYPE_MULTICAST PXE_FRAME_TYPE_FILTERED_MULTICAST
-
-typedef PXE_UINT32 PXE_IPV4;
-
-typedef PXE_UINT32 PXE_IPV6[4];
-#define PXE_MAC_LENGTH 32
-
-typedef PXE_UINT8 PXE_MAC_ADDR[PXE_MAC_LENGTH];
-
-typedef PXE_UINT8 PXE_IFTYPE;
-typedef UINT16 PXE_MEDIA_PROTOCOL;
-
-//
-// This information is from the ARP section of RFC 1700.
-//
-// 1 Ethernet (10Mb) [JBP]
-// 2 Experimental Ethernet (3Mb) [JBP]
-// 3 Amateur Radio AX.25 [PXK]
-// 4 Proteon ProNET Token Ring [JBP]
-// 5 Chaos [GXP]
-// 6 IEEE 802 Networks [JBP]
-// 7 ARCNET [JBP]
-// 8 Hyperchannel [JBP]
-// 9 Lanstar [TU]
-// 10 Autonet Short Address [MXB1]
-// 11 LocalTalk [JKR1]
-// 12 LocalNet (IBM* PCNet or SYTEK* LocalNET) [JXM]
-// 13 Ultra link [RXD2]
-// 14 SMDS [GXC1]
-// 15 Frame Relay [AGM]
-// 16 Asynchronous Transmission Mode (ATM) [JXB2]
-// 17 HDLC [JBP]
-// 18 Fibre Channel [Yakov Rekhter]
-// 19 Asynchronous Transmission Mode (ATM) [Mark Laubach]
-// 20 Serial Line [JBP]
-// 21 Asynchronous Transmission Mode (ATM) [MXB1]
-//
-// * Other names and brands may be claimed as the property of others.
-//
-#define PXE_IFTYPE_ETHERNET 0x01
-#define PXE_IFTYPE_TOKENRING 0x04
-#define PXE_IFTYPE_FIBRE_CHANNEL 0x12
-
-typedef struct s_pxe_hw_undi {
- PXE_UINT32 Signature; // PXE_ROMID_SIGNATURE
- PXE_UINT8 Len; // sizeof(PXE_HW_UNDI)
- PXE_UINT8 Fudge; // makes 8-bit cksum equal zero
- PXE_UINT8 Rev; // PXE_ROMID_REV
- PXE_UINT8 IFcnt; // physical connector count
- PXE_UINT8 MajorVer; // PXE_ROMID_MAJORVER
- PXE_UINT8 MinorVer; // PXE_ROMID_MINORVER
- PXE_UINT16 reserved; // zero, not used
- PXE_UINT32 Implementation; // implementation flags
- // reserved // vendor use
- // UINT32 Status; // status port
- // UINT32 Command; // command port
- // UINT64 CDBaddr; // CDB address port
- //
-} PXE_HW_UNDI;
-
-//
-// Status port bit definitions
-//
-//
-// UNDI operation state
-//
-#define PXE_HWSTAT_STATE_MASK 0xC0000000
-#define PXE_HWSTAT_BUSY 0xC0000000
-#define PXE_HWSTAT_INITIALIZED 0x80000000
-#define PXE_HWSTAT_STARTED 0x40000000
-#define PXE_HWSTAT_STOPPED 0x00000000
-
-//
-// If set, last command failed
-//
-#define PXE_HWSTAT_COMMAND_FAILED 0x20000000
-
-//
-// If set, identifies enabled receive filters
-//
-#define PXE_HWSTAT_PROMISCUOUS_MULTICAST_RX_ENABLED 0x00001000
-#define PXE_HWSTAT_PROMISCUOUS_RX_ENABLED 0x00000800
-#define PXE_HWSTAT_BROADCAST_RX_ENABLED 0x00000400
-#define PXE_HWSTAT_MULTICAST_RX_ENABLED 0x00000200
-#define PXE_HWSTAT_UNICAST_RX_ENABLED 0x00000100
-
-//
-// If set, identifies enabled external interrupts
-//
-#define PXE_HWSTAT_SOFTWARE_INT_ENABLED 0x00000080
-#define PXE_HWSTAT_TX_COMPLETE_INT_ENABLED 0x00000040
-#define PXE_HWSTAT_PACKET_RX_INT_ENABLED 0x00000020
-#define PXE_HWSTAT_CMD_COMPLETE_INT_ENABLED 0x00000010
-
-//
-// If set, identifies pending interrupts
-//
-#define PXE_HWSTAT_SOFTWARE_INT_PENDING 0x00000008
-#define PXE_HWSTAT_TX_COMPLETE_INT_PENDING 0x00000004
-#define PXE_HWSTAT_PACKET_RX_INT_PENDING 0x00000002
-#define PXE_HWSTAT_CMD_COMPLETE_INT_PENDING 0x00000001
-
-//
-// Command port definitions
-//
-//
-// If set, CDB identified in CDBaddr port is given to UNDI.
-// If not set, other bits in this word will be processed.
-//
-#define PXE_HWCMD_ISSUE_COMMAND 0x80000000
-#define PXE_HWCMD_INTS_AND_FILTS 0x00000000
-
-//
-// Use these to enable/disable receive filters.
-//
-#define PXE_HWCMD_PROMISCUOUS_MULTICAST_RX_ENABLE 0x00001000
-#define PXE_HWCMD_PROMISCUOUS_RX_ENABLE 0x00000800
-#define PXE_HWCMD_BROADCAST_RX_ENABLE 0x00000400
-#define PXE_HWCMD_MULTICAST_RX_ENABLE 0x00000200
-#define PXE_HWCMD_UNICAST_RX_ENABLE 0x00000100
-
-//
-// Use these to enable/disable external interrupts
-//
-#define PXE_HWCMD_SOFTWARE_INT_ENABLE 0x00000080
-#define PXE_HWCMD_TX_COMPLETE_INT_ENABLE 0x00000040
-#define PXE_HWCMD_PACKET_RX_INT_ENABLE 0x00000020
-#define PXE_HWCMD_CMD_COMPLETE_INT_ENABLE 0x00000010
-
-//
-// Use these to clear pending external interrupts
-//
-#define PXE_HWCMD_CLEAR_SOFTWARE_INT 0x00000008
-#define PXE_HWCMD_CLEAR_TX_COMPLETE_INT 0x00000004
-#define PXE_HWCMD_CLEAR_PACKET_RX_INT 0x00000002
-#define PXE_HWCMD_CLEAR_CMD_COMPLETE_INT 0x00000001
-
-typedef struct s_pxe_sw_undi {
- PXE_UINT32 Signature; // PXE_ROMID_SIGNATURE
- PXE_UINT8 Len; // sizeof(PXE_SW_UNDI)
- PXE_UINT8 Fudge; // makes 8-bit cksum zero
- PXE_UINT8 Rev; // PXE_ROMID_REV
- PXE_UINT8 IFcnt; // physical connector count
- PXE_UINT8 MajorVer; // PXE_ROMID_MAJORVER
- PXE_UINT8 MinorVer; // PXE_ROMID_MINORVER
- PXE_UINT16 reserved1; // zero, not used
- PXE_UINT32 Implementation; // Implementation flags
- PXE_UINT64 EntryPoint; // API entry point
- PXE_UINT8 reserved2[3]; // zero, not used
- PXE_UINT8 BusCnt; // number of bustypes supported
- PXE_UINT32 BusType[1]; // list of supported bustypes
-} PXE_SW_UNDI;
-
-typedef union u_pxe_undi {
- PXE_HW_UNDI hw;
- PXE_SW_UNDI sw;
-} PXE_UNDI;
-
-//
-// Signature of !PXE structure
-//
-#define PXE_ROMID_SIGNATURE PXE_BUSTYPE ('!', 'P', 'X', 'E')
-
-//
-// !PXE structure format revision
-//
-#define PXE_ROMID_REV 0x02
-
-//
-// UNDI command interface revision. These are the values that get sent
-// in option 94 (Client Network Interface Identifier) in the DHCP Discover
-// and PXE Boot Server Request packets.
-//
-#define PXE_ROMID_MAJORVER 0x03
-#define PXE_ROMID_MINORVER 0x01
-
-//
-// Implementation flags
-//
-#define PXE_ROMID_IMP_HW_UNDI 0x80000000
-#define PXE_ROMID_IMP_SW_VIRT_ADDR 0x40000000
-#define PXE_ROMID_IMP_64BIT_DEVICE 0x00010000
-#define PXE_ROMID_IMP_FRAG_SUPPORTED 0x00008000
-#define PXE_ROMID_IMP_CMD_LINK_SUPPORTED 0x00004000
-#define PXE_ROMID_IMP_CMD_QUEUE_SUPPORTED 0x00002000
-#define PXE_ROMID_IMP_MULTI_FRAME_SUPPORTED 0x00001000
-#define PXE_ROMID_IMP_NVDATA_SUPPORT_MASK 0x00000C00
-#define PXE_ROMID_IMP_NVDATA_BULK_WRITABLE 0x00000C00
-#define PXE_ROMID_IMP_NVDATA_SPARSE_WRITABLE 0x00000800
-#define PXE_ROMID_IMP_NVDATA_READ_ONLY 0x00000400
-#define PXE_ROMID_IMP_NVDATA_NOT_AVAILABLE 0x00000000
-#define PXE_ROMID_IMP_STATISTICS_SUPPORTED 0x00000200
-#define PXE_ROMID_IMP_STATION_ADDR_SETTABLE 0x00000100
-#define PXE_ROMID_IMP_PROMISCUOUS_MULTICAST_RX_SUPPORTED 0x00000080
-#define PXE_ROMID_IMP_PROMISCUOUS_RX_SUPPORTED 0x00000040
-#define PXE_ROMID_IMP_BROADCAST_RX_SUPPORTED 0x00000020
-#define PXE_ROMID_IMP_FILTERED_MULTICAST_RX_SUPPORTED 0x00000010
-#define PXE_ROMID_IMP_SOFTWARE_INT_SUPPORTED 0x00000008
-#define PXE_ROMID_IMP_TX_COMPLETE_INT_SUPPORTED 0x00000004
-#define PXE_ROMID_IMP_PACKET_RX_INT_SUPPORTED 0x00000002
-#define PXE_ROMID_IMP_CMD_COMPLETE_INT_SUPPORTED 0x00000001
-
-typedef struct s_pxe_cdb {
- PXE_OPCODE OpCode;
- PXE_OPFLAGS OpFlags;
- PXE_UINT16 CPBsize;
- PXE_UINT16 DBsize;
- PXE_UINT64 CPBaddr;
- PXE_UINT64 DBaddr;
- PXE_STATCODE StatCode;
- PXE_STATFLAGS StatFlags;
- PXE_UINT16 IFnum;
- PXE_CONTROL Control;
-} PXE_CDB;
-
-typedef union u_pxe_ip_addr {
- PXE_IPV6 IPv6;
- PXE_IPV4 IPv4;
-} PXE_IP_ADDR;
-
-typedef union pxe_device {
- //
- // PCI and PC Card NICs are both identified using bus, device
- // and function numbers. For PC Card, this may require PC
- // Card services to be loaded in the BIOS or preboot
- // environment.
- //
- struct {
- //
- // See S/W UNDI ROMID structure definition for PCI and
- // PCC BusType definitions.
- //
- PXE_UINT32 BusType;
-
- //
- // Bus, device & function numbers that locate this device.
- //
- PXE_UINT16 Bus;
- PXE_UINT8 Device;
- PXE_UINT8 Function;
- }
- PCI, PCC;
-
- //
- // %%TBD - More information is needed about enumerating
- // USB and 1394 devices.
- //
- struct {
- PXE_UINT32 BusType;
- PXE_UINT32 tdb;
- }
- USB, _1394;
-} PXE_DEVICE;
-
-//
-// cpb and db definitions
-//
-#define MAX_PCI_CONFIG_LEN 64 // # of dwords
-#define MAX_EEPROM_LEN 128 // #of dwords
-#define MAX_XMIT_BUFFERS 32 // recycling Q length for xmit_done
-#define MAX_MCAST_ADDRESS_CNT 8
-
-typedef struct s_pxe_cpb_start_30 {
- //
- // PXE_VOID Delay(UINTN microseconds);
- //
- // UNDI will never request a delay smaller than 10 microseconds
- // and will always request delays in increments of 10 microseconds.
- // The Delay() CallBack routine must delay between n and n + 10
- // microseconds before returning control to the UNDI.
- //
- // This field cannot be set to zero.
- //
- UINT64 Delay;
-
- //
- // PXE_VOID Block(UINT32 enable);
- //
- // UNDI may need to block multi-threaded/multi-processor access to
- // critical code sections when programming or accessing the network
- // device. To this end, a blocking service is needed by the UNDI.
- // When UNDI needs a block, it will call Block() passing a non-zero
- // value. When UNDI no longer needs a block, it will call Block()
- // with a zero value. When called, if the Block() is already enabled,
- // do not return control to the UNDI until the previous Block() is
- // disabled.
- //
- // This field cannot be set to zero.
- //
- UINT64 Block;
-
- //
- // PXE_VOID Virt2Phys(UINT64 virtual, UINT64 physical_ptr);
- //
- // UNDI will pass the virtual address of a buffer and the virtual
- // address of a 64-bit physical buffer. Convert the virtual address
- // to a physical address and write the result to the physical address
- // buffer. If virtual and physical addresses are the same, just
- // copy the virtual address to the physical address buffer.
- //
- // This field can be set to zero if virtual and physical addresses
- // are equal.
- //
- UINT64 Virt2Phys;
- //
- // PXE_VOID Mem_IO(UINT8 read_write, UINT8 len, UINT64 port,
- // UINT64 buf_addr);
- //
- // UNDI will read or write the device io space using this call back
- // function. It passes the number of bytes as the len parameter and it
- // will be either 1,2,4 or 8.
- //
- // This field can not be set to zero.
- //
- UINT64 Mem_IO;
-} PXE_CPB_START_30;
-
-typedef struct s_pxe_cpb_start_31 {
- //
- // PXE_VOID Delay(UINT64 UnqId, UINTN microseconds);
- //
- // UNDI will never request a delay smaller than 10 microseconds
- // and will always request delays in increments of 10 microseconds.
- // The Delay() CallBack routine must delay between n and n + 10
- // microseconds before returning control to the UNDI.
- //
- // This field cannot be set to zero.
- //
- UINT64 Delay;
-
- //
- // PXE_VOID Block(UINT64 unq_id, UINT32 enable);
- //
- // UNDI may need to block multi-threaded/multi-processor access to
- // critical code sections when programming or accessing the network
- // device. To this end, a blocking service is needed by the UNDI.
- // When UNDI needs a block, it will call Block() passing a non-zero
- // value. When UNDI no longer needs a block, it will call Block()
- // with a zero value. When called, if the Block() is already enabled,
- // do not return control to the UNDI until the previous Block() is
- // disabled.
- //
- // This field cannot be set to zero.
- //
- UINT64 Block;
-
- //
- // PXE_VOID Virt2Phys(UINT64 UnqId, UINT64 virtual, UINT64 physical_ptr);
- //
- // UNDI will pass the virtual address of a buffer and the virtual
- // address of a 64-bit physical buffer. Convert the virtual address
- // to a physical address and write the result to the physical address
- // buffer. If virtual and physical addresses are the same, just
- // copy the virtual address to the physical address buffer.
- //
- // This field can be set to zero if virtual and physical addresses
- // are equal.
- //
- UINT64 Virt2Phys;
- //
- // PXE_VOID Mem_IO(UINT64 UnqId, UINT8 read_write, UINT8 len, UINT64 port,
- // UINT64 buf_addr);
- //
- // UNDI will read or write the device io space using this call back
- // function. It passes the number of bytes as the len parameter and it
- // will be either 1,2,4 or 8.
- //
- // This field can not be set to zero.
- //
- UINT64 Mem_IO;
- //
- // PXE_VOID Map_Mem(UINT64 unq_id, UINT64 virtual_addr, UINT32 size,
- // UINT32 Direction, UINT64 mapped_addr);
- //
- // UNDI will pass the virtual address of a buffer, direction of the data
- // flow from/to the mapped buffer (the constants are defined below)
- // and a place holder (pointer) for the mapped address.
- // This call will Map the given address to a physical DMA address and write
- // the result to the mapped_addr pointer. If there is no need to
- // map the given address to a lower address (i.e. the given address is
- // associated with a physical address that is already compatible to be
- // used with the DMA, it converts the given virtual address to it's
- // physical address and write that in the mapped address pointer.
- //
- // This field can be set to zero if there is no mapping service available
- //
- UINT64 Map_Mem;
-
- //
- // PXE_VOID UnMap_Mem(UINT64 unq_id, UINT64 virtual_addr, UINT32 size,
- // UINT32 Direction, UINT64 mapped_addr);
- //
- // UNDI will pass the virtual and mapped addresses of a buffer
- // This call will un map the given address
- //
- // This field can be set to zero if there is no unmapping service available
- //
- UINT64 UnMap_Mem;
-
- //
- // PXE_VOID Sync_Mem(UINT64 unq_id, UINT64 virtual,
- // UINT32 size, UINT32 Direction, UINT64 mapped_addr);
- //
- // UNDI will pass the virtual and mapped addresses of a buffer
- // This call will synchronize the contents of both the virtual and mapped
- // buffers for the given Direction.
- //
- // This field can be set to zero if there is no service available
- //
- UINT64 Sync_Mem;
-
- //
- // protocol driver can provide anything for this Unique_ID, UNDI remembers
- // that as just a 64bit value assocaited to the interface specified by
- // the ifnum and gives it back as a parameter to all the call-back routines
- // when calling for that interface!
- //
- UINT64 Unique_ID;
- //
-} PXE_CPB_START_31;
-
-#define TO_AND_FROM_DEVICE 0
-#define FROM_DEVICE 1
-#define TO_DEVICE 2
-
-#define PXE_DELAY_MILLISECOND 1000
-#define PXE_DELAY_SECOND 1000000
-#define PXE_IO_READ 0
-#define PXE_IO_WRITE 1
-#define PXE_MEM_READ 2
-#define PXE_MEM_WRITE 4
-
-typedef struct s_pxe_db_get_init_info {
- //
- // Minimum length of locked memory buffer that must be given to
- // the Initialize command. Giving UNDI more memory will generally
- // give better performance.
- //
- // If MemoryRequired is zero, the UNDI does not need and will not
- // use system memory to receive and transmit packets.
- //
- PXE_UINT32 MemoryRequired;
-
- //
- // Maximum frame data length for Tx/Rx excluding the media header.
- //
- PXE_UINT32 FrameDataLen;
-
- //
- // Supported link speeds are in units of mega bits. Common ethernet
- // values are 10, 100 and 1000. Unused LinkSpeeds[] entries are zero
- // filled.
- //
- PXE_UINT32 LinkSpeeds[4];
-
- //
- // Number of non-volatile storage items.
- //
- PXE_UINT32 NvCount;
-
- //
- // Width of non-volatile storage item in bytes. 0, 1, 2 or 4
- //
- PXE_UINT16 NvWidth;
-
- //
- // Media header length. This is the typical media header length for
- // this UNDI. This information is needed when allocating receive
- // and transmit buffers.
- //
- PXE_UINT16 MediaHeaderLen;
-
- //
- // Number of bytes in the NIC hardware (MAC) address.
- //
- PXE_UINT16 HWaddrLen;
-
- //
- // Maximum number of multicast MAC addresses in the multicast
- // MAC address filter list.
- //
- PXE_UINT16 MCastFilterCnt;
-
- //
- // Default number and size of transmit and receive buffers that will
- // be allocated by the UNDI. If MemoryRequired is non-zero, this
- // allocation will come out of the memory buffer given to the Initialize
- // command. If MemoryRequired is zero, this allocation will come out of
- // memory on the NIC.
- //
- PXE_UINT16 TxBufCnt;
- PXE_UINT16 TxBufSize;
- PXE_UINT16 RxBufCnt;
- PXE_UINT16 RxBufSize;
-
- //
- // Hardware interface types defined in the Assigned Numbers RFC
- // and used in DHCP and ARP packets.
- // See the PXE_IFTYPE typedef and PXE_IFTYPE_xxx macros.
- //
- PXE_UINT8 IFtype;
-
- //
- // Supported duplex. See PXE_DUPLEX_xxxxx #defines below.
- //
- PXE_UINT8 SupportedDuplexModes;
-
- //
- // Supported loopback options. See PXE_LOOPBACK_xxxxx #defines below.
- //
- PXE_UINT8 SupportedLoopBackModes;
-} PXE_DB_GET_INIT_INFO;
-
-#define PXE_MAX_TXRX_UNIT_ETHER 1500
-
-#define PXE_HWADDR_LEN_ETHER 0x0006
-#define PXE_MAC_HEADER_LEN_ETHER 0x000E
-
-#define PXE_DUPLEX_ENABLE_FULL_SUPPORTED 1
-#define PXE_DUPLEX_FORCE_FULL_SUPPORTED 2
-
-#define PXE_LOOPBACK_INTERNAL_SUPPORTED 1
-#define PXE_LOOPBACK_EXTERNAL_SUPPORTED 2
-
-typedef struct s_pxe_pci_config_info {
- //
- // This is the flag field for the PXE_DB_GET_CONFIG_INFO union.
- // For PCI bus devices, this field is set to PXE_BUSTYPE_PCI.
- //
- UINT32 BusType;
-
- //
- // This identifies the PCI network device that this UNDI interface
- // is bound to.
- //
- UINT16 Bus;
- UINT8 Device;
- UINT8 Function;
-
- //
- // This is a copy of the PCI configuration space for this
- // network device.
- //
- union {
- UINT8 Byte[256];
- UINT16 Word[128];
- UINT32 Dword[64];
- } Config;
-} PXE_PCI_CONFIG_INFO;
-
-typedef struct s_pxe_pcc_config_info {
- //
- // This is the flag field for the PXE_DB_GET_CONFIG_INFO union.
- // For PCC bus devices, this field is set to PXE_BUSTYPE_PCC.
- //
- PXE_UINT32 BusType;
-
- //
- // This identifies the PCC network device that this UNDI interface
- // is bound to.
- //
- PXE_UINT16 Bus;
- PXE_UINT8 Device;
- PXE_UINT8 Function;
-
- //
- // This is a copy of the PCC configuration space for this
- // network device.
- //
- union {
- PXE_UINT8 Byte[256];
- PXE_UINT16 Word[128];
- PXE_UINT32 Dword[64];
- } Config;
-} PXE_PCC_CONFIG_INFO;
-
-typedef union u_pxe_db_get_config_info {
- PXE_PCI_CONFIG_INFO pci;
- PXE_PCC_CONFIG_INFO pcc;
-} PXE_DB_GET_CONFIG_INFO;
-
-typedef struct s_pxe_cpb_initialize {
- //
- // Address of first (lowest) byte of the memory buffer. This buffer must
- // be in contiguous physical memory and cannot be swapped out. The UNDI
- // will be using this for transmit and receive buffering.
- //
- PXE_UINT64 MemoryAddr;
-
- //
- // MemoryLength must be greater than or equal to MemoryRequired
- // returned by the Get Init Info command.
- //
- PXE_UINT32 MemoryLength;
-
- //
- // Desired link speed in Mbit/sec. Common ethernet values are 10, 100
- // and 1000. Setting a value of zero will auto-detect and/or use the
- // default link speed (operation depends on UNDI/NIC functionality).
- //
- PXE_UINT32 LinkSpeed;
-
- //
- // Suggested number and size of receive and transmit buffers to
- // allocate. If MemoryAddr and MemoryLength are non-zero, this
- // allocation comes out of the supplied memory buffer. If MemoryAddr
- // and MemoryLength are zero, this allocation comes out of memory
- // on the NIC.
- //
- // If these fields are set to zero, the UNDI will allocate buffer
- // counts and sizes as it sees fit.
- //
- PXE_UINT16 TxBufCnt;
- PXE_UINT16 TxBufSize;
- PXE_UINT16 RxBufCnt;
- PXE_UINT16 RxBufSize;
-
- //
- // The following configuration parameters are optional and must be zero
- // to use the default values.
- //
- PXE_UINT8 DuplexMode;
-
- PXE_UINT8 LoopBackMode;
-} PXE_CPB_INITIALIZE;
-
-#define PXE_DUPLEX_DEFAULT 0x00
-#define PXE_FORCE_FULL_DUPLEX 0x01
-#define PXE_ENABLE_FULL_DUPLEX 0x02
-#define PXE_FORCE_HALF_DUPLEX 0x04
-#define PXE_DISABLE_FULL_DUPLEX 0x08
-
-#define LOOPBACK_NORMAL 0
-#define LOOPBACK_INTERNAL 1
-#define LOOPBACK_EXTERNAL 2
-
-typedef struct s_pxe_db_initialize {
- //
- // Actual amount of memory used from the supplied memory buffer. This
- // may be less that the amount of memory suppllied and may be zero if
- // the UNDI and network device do not use external memory buffers.
- //
- // Memory used by the UNDI and network device is allocated from the
- // lowest memory buffer address.
- //
- PXE_UINT32 MemoryUsed;
-
- //
- // Actual number and size of receive and transmit buffers that were
- // allocated.
- //
- PXE_UINT16 TxBufCnt;
- PXE_UINT16 TxBufSize;
- PXE_UINT16 RxBufCnt;
- PXE_UINT16 RxBufSize;
-} PXE_DB_INITIALIZE;
-
-typedef struct s_pxe_cpb_receive_filters {
- //
- // List of multicast MAC addresses. This list, if present, will
- // replace the existing multicast MAC address filter list.
- //
- PXE_MAC_ADDR MCastList[MAX_MCAST_ADDRESS_CNT];
-} PXE_CPB_RECEIVE_FILTERS;
-
-typedef struct s_pxe_db_receive_filters {
- //
- // Filtered multicast MAC address list.
- //
- PXE_MAC_ADDR MCastList[MAX_MCAST_ADDRESS_CNT];
-} PXE_DB_RECEIVE_FILTERS;
-
-typedef struct s_pxe_cpb_station_address {
- //
- // If supplied and supported, the current station MAC address
- // will be changed.
- //
- PXE_MAC_ADDR StationAddr;
-} PXE_CPB_STATION_ADDRESS;
-
-typedef struct s_pxe_dpb_station_address {
- //
- // Current station MAC address.
- //
- PXE_MAC_ADDR StationAddr;
-
- //
- // Station broadcast MAC address.
- //
- PXE_MAC_ADDR BroadcastAddr;
-
- //
- // Permanent station MAC address.
- //
- PXE_MAC_ADDR PermanentAddr;
-} PXE_DB_STATION_ADDRESS;
-
-typedef struct s_pxe_db_statistics {
- //
- // Bit field identifying what statistic data is collected by the
- // UNDI/NIC.
- // If bit 0x00 is set, Data[0x00] is collected.
- // If bit 0x01 is set, Data[0x01] is collected.
- // If bit 0x20 is set, Data[0x20] is collected.
- // If bit 0x21 is set, Data[0x21] is collected.
- // Etc.
- //
- PXE_UINT64 Supported;
-
- //
- // Statistic data.
- //
- PXE_UINT64 Data[64];
-} PXE_DB_STATISTICS;
-
-//
-// Total number of frames received. Includes frames with errors and
-// dropped frames.
-//
-#define PXE_STATISTICS_RX_TOTAL_FRAMES 0x00
-
-//
-// Number of valid frames received and copied into receive buffers.
-//
-#define PXE_STATISTICS_RX_GOOD_FRAMES 0x01
-
-//
-// Number of frames below the minimum length for the media.
-// This would be <64 for ethernet.
-//
-#define PXE_STATISTICS_RX_UNDERSIZE_FRAMES 0x02
-
-//
-// Number of frames longer than the maxminum length for the
-// media. This would be >1500 for ethernet.
-//
-#define PXE_STATISTICS_RX_OVERSIZE_FRAMES 0x03
-
-//
-// Valid frames that were dropped because receive buffers were full.
-//
-#define PXE_STATISTICS_RX_DROPPED_FRAMES 0x04
-
-//
-// Number of valid unicast frames received and not dropped.
-//
-#define PXE_STATISTICS_RX_UNICAST_FRAMES 0x05
-
-//
-// Number of valid broadcast frames received and not dropped.
-//
-#define PXE_STATISTICS_RX_BROADCAST_FRAMES 0x06
-
-//
-// Number of valid mutlicast frames received and not dropped.
-//
-#define PXE_STATISTICS_RX_MULTICAST_FRAMES 0x07
-
-//
-// Number of frames w/ CRC or alignment errors.
-//
-#define PXE_STATISTICS_RX_CRC_ERROR_FRAMES 0x08
-
-//
-// Total number of bytes received. Includes frames with errors
-// and dropped frames.
-//
-#define PXE_STATISTICS_RX_TOTAL_BYTES 0x09
-
-//
-// Transmit statistics.
-//
-#define PXE_STATISTICS_TX_TOTAL_FRAMES 0x0A
-#define PXE_STATISTICS_TX_GOOD_FRAMES 0x0B
-#define PXE_STATISTICS_TX_UNDERSIZE_FRAMES 0x0C
-#define PXE_STATISTICS_TX_OVERSIZE_FRAMES 0x0D
-#define PXE_STATISTICS_TX_DROPPED_FRAMES 0x0E
-#define PXE_STATISTICS_TX_UNICAST_FRAMES 0x0F
-#define PXE_STATISTICS_TX_BROADCAST_FRAMES 0x10
-#define PXE_STATISTICS_TX_MULTICAST_FRAMES 0x11
-#define PXE_STATISTICS_TX_CRC_ERROR_FRAMES 0x12
-#define PXE_STATISTICS_TX_TOTAL_BYTES 0x13
-
-//
-// Number of collisions detection on this subnet.
-//
-#define PXE_STATISTICS_COLLISIONS 0x14
-
-//
-// Number of frames destined for unsupported protocol.
-//
-#define PXE_STATISTICS_UNSUPPORTED_PROTOCOL 0x15
-
-typedef struct s_pxe_cpb_mcast_ip_to_mac {
- //
- // Multicast IP address to be converted to multicast MAC address.
- //
- PXE_IP_ADDR IP;
-} PXE_CPB_MCAST_IP_TO_MAC;
-
-typedef struct s_pxe_db_mcast_ip_to_mac {
- //
- // Multicast MAC address.
- //
- PXE_MAC_ADDR MAC;
-} PXE_DB_MCAST_IP_TO_MAC;
-
-typedef struct s_pxe_cpb_nvdata_sparse {
- //
- // NvData item list. Only items in this list will be updated.
- //
- struct {
- //
- // Non-volatile storage address to be changed.
- //
- PXE_UINT32 Addr;
-
- //
- // Data item to write into above storage address.
- //
- union {
- PXE_UINT8 Byte;
- PXE_UINT16 Word;
- PXE_UINT32 Dword;
- } Data;
- } Item[MAX_EEPROM_LEN];
-}
-PXE_CPB_NVDATA_SPARSE;
-
-//
-// When using bulk update, the size of the CPB structure must be
-// the same size as the non-volatile NIC storage.
-//
-typedef union u_pxe_cpb_nvdata_bulk {
- //
- // Array of byte-wide data items.
- //
- PXE_UINT8 Byte[MAX_EEPROM_LEN << 2];
-
- //
- // Array of word-wide data items.
- //
- PXE_UINT16 Word[MAX_EEPROM_LEN << 1];
-
- //
- // Array of dword-wide data items.
- //
- PXE_UINT32 Dword[MAX_EEPROM_LEN];
-} PXE_CPB_NVDATA_BULK;
-
-typedef struct s_pxe_db_nvdata {
- //
- // Arrays of data items from non-volatile storage.
- //
- union {
- //
- // Array of byte-wide data items.
- //
- PXE_UINT8 Byte[MAX_EEPROM_LEN << 2];
-
- //
- // Array of word-wide data items.
- //
- PXE_UINT16 Word[MAX_EEPROM_LEN << 1];
-
- //
- // Array of dword-wide data items.
- //
- PXE_UINT32 Dword[MAX_EEPROM_LEN];
- } Data;
-} PXE_DB_NVDATA;
-
-typedef struct s_pxe_db_get_status {
- //
- // Length of next receive frame (header + data). If this is zero,
- // there is no next receive frame available.
- //
- PXE_UINT32 RxFrameLen;
-
- //
- // Reserved, set to zero.
- //
- PXE_UINT32 reserved;
-
- //
- // Addresses of transmitted buffers that need to be recycled.
- //
- PXE_UINT64 TxBuffer[MAX_XMIT_BUFFERS];
-} PXE_DB_GET_STATUS;
-
-typedef struct s_pxe_cpb_fill_header {
- //
- // Source and destination MAC addresses. These will be copied into
- // the media header without doing byte swapping.
- //
- PXE_MAC_ADDR SrcAddr;
- PXE_MAC_ADDR DestAddr;
-
- //
- // Address of first byte of media header. The first byte of packet data
- // follows the last byte of the media header.
- //
- PXE_UINT64 MediaHeader;
-
- //
- // Length of packet data in bytes (not including the media header).
- //
- PXE_UINT32 PacketLen;
-
- //
- // Protocol type. This will be copied into the media header without
- // doing byte swapping. Protocol type numbers can be obtained from
- // the Assigned Numbers RFC 1700.
- //
- PXE_UINT16 Protocol;
-
- //
- // Length of the media header in bytes.
- //
- PXE_UINT16 MediaHeaderLen;
-} PXE_CPB_FILL_HEADER;
-
-#define PXE_PROTOCOL_ETHERNET_IP 0x0800
-#define PXE_PROTOCOL_ETHERNET_ARP 0x0806
-#define MAX_XMIT_FRAGMENTS 16
-
-typedef struct s_pxe_cpb_fill_header_fragmented {
- //
- // Source and destination MAC addresses. These will be copied into
- // the media header without doing byte swapping.
- //
- PXE_MAC_ADDR SrcAddr;
- PXE_MAC_ADDR DestAddr;
-
- //
- // Length of packet data in bytes (not including the media header).
- //
- PXE_UINT32 PacketLen;
-
- //
- // Protocol type. This will be copied into the media header without
- // doing byte swapping. Protocol type numbers can be obtained from
- // the Assigned Numbers RFC 1700.
- //
- PXE_MEDIA_PROTOCOL Protocol;
-
- //
- // Length of the media header in bytes.
- //
- PXE_UINT16 MediaHeaderLen;
-
- //
- // Number of packet fragment descriptors.
- //
- PXE_UINT16 FragCnt;
-
- //
- // Reserved, must be set to zero.
- //
- PXE_UINT16 reserved;
-
- //
- // Array of packet fragment descriptors. The first byte of the media
- // header is the first byte of the first fragment.
- //
- struct {
- //
- // Address of this packet fragment.
- //
- PXE_UINT64 FragAddr;
-
- //
- // Length of this packet fragment.
- //
- PXE_UINT32 FragLen;
-
- //
- // Reserved, must be set to zero.
- //
- PXE_UINT32 reserved;
- } FragDesc[MAX_XMIT_FRAGMENTS];
-}
-PXE_CPB_FILL_HEADER_FRAGMENTED;
-
-typedef struct s_pxe_cpb_transmit {
- //
- // Address of first byte of frame buffer. This is also the first byte
- // of the media header.
- //
- PXE_UINT64 FrameAddr;
-
- //
- // Length of the data portion of the frame buffer in bytes. Do not
- // include the length of the media header.
- //
- PXE_UINT32 DataLen;
-
- //
- // Length of the media header in bytes.
- //
- PXE_UINT16 MediaheaderLen;
-
- //
- // Reserved, must be zero.
- //
- PXE_UINT16 reserved;
-} PXE_CPB_TRANSMIT;
-
-typedef struct s_pxe_cpb_transmit_fragments {
- //
- // Length of packet data in bytes (not including the media header).
- //
- PXE_UINT32 FrameLen;
-
- //
- // Length of the media header in bytes.
- //
- PXE_UINT16 MediaheaderLen;
-
- //
- // Number of packet fragment descriptors.
- //
- PXE_UINT16 FragCnt;
-
- //
- // Array of frame fragment descriptors. The first byte of the first
- // fragment is also the first byte of the media header.
- //
- struct {
- //
- // Address of this frame fragment.
- //
- PXE_UINT64 FragAddr;
-
- //
- // Length of this frame fragment.
- //
- PXE_UINT32 FragLen;
-
- //
- // Reserved, must be set to zero.
- //
- PXE_UINT32 reserved;
- } FragDesc[MAX_XMIT_FRAGMENTS];
-}
-PXE_CPB_TRANSMIT_FRAGMENTS;
-
-typedef struct s_pxe_cpb_receive {
- //
- // Address of first byte of receive buffer. This is also the first byte
- // of the frame header.
- //
- PXE_UINT64 BufferAddr;
-
- //
- // Length of receive buffer. This must be large enough to hold the
- // received frame (media header + data). If the length of smaller than
- // the received frame, data will be lost.
- //
- PXE_UINT32 BufferLen;
-
- //
- // Reserved, must be set to zero.
- //
- PXE_UINT32 reserved;
-} PXE_CPB_RECEIVE;
-
-typedef struct s_pxe_db_receive {
- //
- // Source and destination MAC addresses from media header.
- //
- PXE_MAC_ADDR SrcAddr;
- PXE_MAC_ADDR DestAddr;
-
- //
- // Length of received frame. May be larger than receive buffer size.
- // The receive buffer will not be overwritten. This is how to tell
- // if data was lost because the receive buffer was too small.
- //
- PXE_UINT32 FrameLen;
-
- //
- // Protocol type from media header.
- //
- PXE_MEDIA_PROTOCOL Protocol;
-
- //
- // Length of media header in received frame.
- //
- PXE_UINT16 MediaHeaderLen;
-
- //
- // Type of receive frame.
- //
- PXE_FRAME_TYPE Type;
-
- //
- // Reserved, must be zero.
- //
- PXE_UINT8 reserved[7];
-
-} PXE_DB_RECEIVE;
-
-#pragma pack()
-
-#endif
|