diff options
Diffstat (limited to 'EdkModulePkg/Universal/Disk/DiskIo/Dxe/diskio.c')
-rw-r--r-- | EdkModulePkg/Universal/Disk/DiskIo/Dxe/diskio.c | 1657 |
1 files changed, 781 insertions, 876 deletions
diff --git a/EdkModulePkg/Universal/Disk/DiskIo/Dxe/diskio.c b/EdkModulePkg/Universal/Disk/DiskIo/Dxe/diskio.c index 4998c9b..35d2a19 100644 --- a/EdkModulePkg/Universal/Disk/DiskIo/Dxe/diskio.c +++ b/EdkModulePkg/Universal/Disk/DiskIo/Dxe/diskio.c @@ -1,876 +1,781 @@ -/*++
-
-Copyright (c) 2006, Intel Corporation
-All rights reserved. This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-Module Name:
-
- DiskIo.c
-
-Abstract:
-
- DiskIo driver that layers it's self on every Block IO protocol in the system.
- DiskIo converts a block oriented device to a byte oriented device.
-
- ReadDisk may have to do reads that are not aligned on sector boundaries.
- There are three cases:
-
- UnderRun - The first byte is not on a sector boundary or the read request is
- less than a sector in length.
-
- Aligned - A read of N contiguous sectors.
-
- OverRun - The last byte is not on a sector boundary.
-
---*/
-
-#include "DiskIo.h"
-
-//
-// Prototypes
-// Driver model protocol interface
-//
-EFI_STATUS
-EFIAPI
-DiskIoDriverBindingSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-EFI_STATUS
-EFIAPI
-DiskIoDriverBindingStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-EFI_STATUS
-EFIAPI
-DiskIoDriverBindingStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- );
-
-//
-// Disk I/O Protocol Interface
-//
-EFI_STATUS
-EFIAPI
-DiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- );
-
-EFI_STATUS
-EFIAPI
-DiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- );
-
-EFI_DRIVER_BINDING_PROTOCOL gDiskIoDriverBinding = {
- DiskIoDriverBindingSupported,
- DiskIoDriverBindingStart,
- DiskIoDriverBindingStop,
- 0x10,
- NULL,
- NULL
-};
-
-DISK_IO_PRIVATE_DATA gDiskIoPrivateDataTemplate = {
- DISK_IO_PRIVATE_DATA_SIGNATURE,
- {
- EFI_DISK_IO_PROTOCOL_REVISION,
- DiskIoReadDisk,
- DiskIoWriteDisk
- },
- NULL
-};
-
-EFI_STATUS
-EFIAPI
-DiskIoDriverBindingSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
- )
-/*++
-
- Routine Description:
- Test to see if this driver supports ControllerHandle. Any ControllerHandle
- than contains a BlockIo protocol can be supported.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to test.
- RemainingDevicePath - Not used.
-
- Returns:
- EFI_SUCCESS - This driver supports this device.
- EFI_ALREADY_STARTED - This driver is already running on this device.
- other - This driver does not support this device.
-
---*/
-{
- EFI_STATUS Status;
- EFI_BLOCK_IO_PROTOCOL *BlockIo;
-/*
- DEBUG_CODE_BEGIN
- UINT32 Bar;
- UINT32 Foo;
- UINT32 HotPlug;
-
- //
- // Get TYPE 0
- //
- Bar = PcdGet32 (PciExpressBaseVersion);
- DEBUG ((EFI_D_ERROR, "PciExpressBaseVersion = %08x\n", Bar));
-
- //
- // Get TYPE 1
- //
- Foo = PcdGet32 (PciExpressBaseAddress);
- DEBUG ((EFI_D_ERROR, "PciExpressBaseAddress = %08x\n", Foo));
-
- //
- // Set TYPE 1
- //
- PcdSet32 (PciExpressBaseAddress, Foo + 1);
-
- //
- // Get TYPE 1
- //
- Foo = PcdGet32 (PciExpressBaseAddress);
- DEBUG ((EFI_D_ERROR, "PciExpressBaseAddress = %08x\n", Foo));
-
- //
- // Get TYPE 2
- //
- HotPlug = PcdGet32 (PciExpressBaseHotPlug);
- DEBUG ((EFI_D_ERROR, "PciExpressHotPlug = %08x\n", HotPlug));
-
- //
- // Set TYPE 1
- //
- PcdSet32 (PciExpressBaseHotPlug, HotPlug + 1);
-
- //
- // Get TYPE 1
- //
- HotPlug = PcdGet32 (PciExpressBaseHotPlug);
- DEBUG ((EFI_D_ERROR, "PciExpressHotPlug = %08x\n", HotPlug));
-
- DEBUG_CODE_END
-
- DEBUG_CODE_BEGIN
- UINT32 MyVariable;
-
- if (ControllerHandle == NULL) {
- MyVariable = 32 * (UINTN)This;
- ControllerHandle = (EFI_HANDLE)MyVariable;
- DEBUG ((EFI_D_ERROR, "DiskIoSupported-DebugCode. MyVariable = %08x\n", MyVariable));
- ASSERT (MyVariable != 32);
- }
- DEBUG_CODE_END
-*/
- DEBUG ((EFI_D_ERROR, "DiskIoSupported\n"));
-
-// Io8Or (0x400, 1);
-// Io8And (0x400, 1);
-// Io8AndThenOr (0x400, 1, 2);
-
-// Mmio8Or (0xa0000000, 1);
-// Mmio8And (0xa0000000, 1);
-// Mmio8AndThenOr (0xa0000000, 1, 2);
-
-/*
- PciRead8 (PCI_LIB_ADDRESS (1,2,3,4));
- PciRead16 (PCI_LIB_ADDRESS (1,2,3,4));
- PciRead32 (PCI_LIB_ADDRESS (1,2,3,4));
-
- PciWrite8 (PCI_LIB_ADDRESS (1,2,3,4), 0xAA);
- PciWrite16 (PCI_LIB_ADDRESS (1,2,3,4), 0xAA55);
- PciWrite32 (PCI_LIB_ADDRESS (1,2,3,4), 0xAA55A55A);
-
- Pci8Or (PCI_LIB_ADDRESS (1,2,3,4), 0xAA);
- Pci8And (PCI_LIB_ADDRESS (1,2,3,4), 0x55);
- Pci8AndThenOr (PCI_LIB_ADDRESS (1,2,3,4), 0xAA, 0x55);
-
- Pci16Or (PCI_LIB_ADDRESS (1,2,3,4), 0xAA55);
- Pci16And (PCI_LIB_ADDRESS (1,2,3,4), 0x55AA);
- Pci16AndThenOr (PCI_LIB_ADDRESS (1,2,3,4), 0xAA55, 0x55AA);
-
- Pci32Or (PCI_LIB_ADDRESS (1,2,3,4), 0xAA55A55A);
- Pci32And (PCI_LIB_ADDRESS (1,2,3,4), 0x55AA5AA5);
- Pci32AndThenOr (PCI_LIB_ADDRESS (1,2,3,4), 0xAA555AA5, 0x55AAA55A);
-*/
- //
- // Open the IO Abstraction(s) needed to perform the supported test.
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiBlockIoProtocolGuid,
- (VOID **) &BlockIo,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Close the I/O Abstraction(s) used to perform the supported test.
- //
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiBlockIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- return EFI_SUCCESS;
-}
-
-EFI_STATUS
-EFIAPI
-DiskIoDriverBindingStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
- )
-/*++
-
- Routine Description:
- Start this driver on ControllerHandle by opening a Block IO protocol and
- installing a Disk IO protocol on ControllerHandle.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to bind driver to.
- RemainingDevicePath - Not used, always produce all possible children.
-
- Returns:
- EFI_SUCCESS - This driver is added to ControllerHandle.
- EFI_ALREADY_STARTED - This driver is already running on ControllerHandle.
- other - This driver does not support this device.
-
---*/
-{
- EFI_STATUS Status;
- DISK_IO_PRIVATE_DATA *Private;
-
- Private = NULL;
-
- DEBUG ((EFI_D_ERROR, "DiskIoStart\n"));
- //
- // Connect to the Block IO interface on ControllerHandle.
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiBlockIoProtocolGuid,
- (VOID **) &gDiskIoPrivateDataTemplate.BlockIo,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- //
- // Initialize the Disk IO device instance.
- //
- Private = AllocateCopyPool (sizeof (DISK_IO_PRIVATE_DATA), &gDiskIoPrivateDataTemplate);
- if (Private == NULL) {
- Status = EFI_OUT_OF_RESOURCES;
- goto ErrorExit;
- }
- //
- // Install protocol interfaces for the Disk IO device.
- //
- Status = gBS->InstallProtocolInterface (
- &ControllerHandle,
- &gEfiDiskIoProtocolGuid,
- EFI_NATIVE_INTERFACE,
- &Private->DiskIo
- );
-
-ErrorExit:
- if (EFI_ERROR (Status)) {
-
- if (Private != NULL) {
- gBS->FreePool (Private);
- }
-
- gBS->CloseProtocol (
- ControllerHandle,
- &gEfiBlockIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-DiskIoDriverBindingStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-/*++
-
- Routine Description:
- Stop this driver on ControllerHandle by removing Disk IO protocol and closing
- the Block IO protocol on ControllerHandle.
-
- Arguments:
- This - Protocol instance pointer.
- ControllerHandle - Handle of device to stop driver on.
- NumberOfChildren - Not used.
- ChildHandleBuffer - Not used.
-
- Returns:
- EFI_SUCCESS - This driver is removed ControllerHandle.
- other - This driver was not removed from this device.
- EFI_UNSUPPORTED
-
---*/
-{
- EFI_STATUS Status;
- EFI_DISK_IO_PROTOCOL *DiskIo;
- DISK_IO_PRIVATE_DATA *Private;
-
- DEBUG ((EFI_D_ERROR, "DiskIoStop\n"));
- //
- // Get our context back.
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiDiskIoProtocolGuid,
- (VOID **) &DiskIo,
- This->DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return EFI_UNSUPPORTED;
- }
-
- Private = DISK_IO_PRIVATE_DATA_FROM_THIS (DiskIo);
-
- Status = gBS->UninstallProtocolInterface (
- ControllerHandle,
- &gEfiDiskIoProtocolGuid,
- &Private->DiskIo
- );
- if (!EFI_ERROR (Status)) {
-
- Status = gBS->CloseProtocol (
- ControllerHandle,
- &gEfiBlockIoProtocolGuid,
- This->DriverBindingHandle,
- ControllerHandle
- );
- }
-
- if (!EFI_ERROR (Status)) {
- gBS->FreePool (Private);
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-DiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- )
-/*++
-
- Routine Description:
- Read BufferSize bytes from Offset into Buffer.
-
- Reads may support reads that are not aligned on
- sector boundaries. There are three cases:
-
- UnderRun - The first byte is not on a sector boundary or the read request is
- less than a sector in length.
-
- Aligned - A read of N contiguous sectors.
-
- OverRun - The last byte is not on a sector boundary.
-
-
- Arguments:
- This - Protocol instance pointer.
- MediaId - Id of the media, changes every time the media is replaced.
- Offset - The starting byte offset to read from.
- BufferSize - Size of Buffer.
- Buffer - Buffer containing read data.
-
- Returns:
- EFI_SUCCESS - The data was read correctly from the device.
- EFI_DEVICE_ERROR - The device reported an error while performing the read.
- EFI_NO_MEDIA - There is no media in the device.
- EFI_MEDIA_CHNAGED - The MediaId does not matched the current device.
- EFI_INVALID_PARAMETER - The read request contains device addresses that are not
- valid for the device.
- EFI_OUT_OF_RESOURCES
-
---*/
-{
- EFI_STATUS Status;
- DISK_IO_PRIVATE_DATA *Private;
- EFI_BLOCK_IO_PROTOCOL *BlockIo;
- EFI_BLOCK_IO_MEDIA *Media;
- UINT32 BlockSize;
- UINT64 Lba;
- UINT64 OverRunLba;
- UINT32 UnderRun;
- UINT32 OverRun;
- BOOLEAN TransactionComplete;
- UINTN WorkingBufferSize;
- UINT8 *WorkingBuffer;
- UINTN Length;
- UINT8 *Data;
- UINT8 *PreData;
- UINTN IsBufferAligned;
- UINTN DataBufferSize;
- BOOLEAN LastRead;
-
- DEBUG ((EFI_D_ERROR, "DiskIoReadDisk\n"));
-
- Private = DISK_IO_PRIVATE_DATA_FROM_THIS (This);
-
- BlockIo = Private->BlockIo;
- Media = BlockIo->Media;
- BlockSize = Media->BlockSize;
-
- if (Media->MediaId != MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- WorkingBuffer = Buffer;
- WorkingBufferSize = BufferSize;
-
- //
- // Allocate a temporary buffer for operation
- //
- DataBufferSize = BlockSize * DATA_BUFFER_BLOCK_NUM;
-
- if (Media->IoAlign > 1) {
- PreData = AllocatePool (DataBufferSize + Media->IoAlign);
- Data = PreData - ((UINTN) PreData & (Media->IoAlign - 1)) + Media->IoAlign;
- } else {
- PreData = AllocatePool (DataBufferSize);
- Data = PreData;
- }
-
- if (PreData == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Lba = DivU64x32Remainder (Offset, BlockSize, &UnderRun);
-
- Length = BlockSize - UnderRun;
- TransactionComplete = FALSE;
-
- Status = EFI_SUCCESS;
- if (UnderRun != 0) {
- //
- // Offset starts in the middle of an Lba, so read the entire block.
- //
- Status = BlockIo->ReadBlocks (
- BlockIo,
- MediaId,
- Lba,
- BlockSize,
- Data
- );
-
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- if (Length > BufferSize) {
- Length = BufferSize;
- TransactionComplete = TRUE;
- }
-
- CopyMem (WorkingBuffer, Data + UnderRun, Length);
-
- WorkingBuffer += Length;
-
- WorkingBufferSize -= Length;
- if (WorkingBufferSize == 0) {
- goto Done;
- }
-
- Lba += 1;
- }
-
- OverRunLba = Lba + DivU64x32Remainder (WorkingBufferSize, BlockSize, &OverRun);
-
- if (!TransactionComplete && WorkingBufferSize >= BlockSize) {
- //
- // If the DiskIo maps directly to a BlockIo device do the read.
- //
- if (OverRun != 0) {
- WorkingBufferSize -= OverRun;
- }
- //
- // Check buffer alignment
- //
- IsBufferAligned = (UINTN) WorkingBuffer & (UINTN) (Media->IoAlign - 1);
-
- if (Media->IoAlign <= 1 || IsBufferAligned == 0) {
- //
- // Alignment is satisfied, so read them together
- //
- Status = BlockIo->ReadBlocks (
- BlockIo,
- MediaId,
- Lba,
- WorkingBufferSize,
- WorkingBuffer
- );
-
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- WorkingBuffer += WorkingBufferSize;
-
- } else {
- //
- // Use the allocated buffer instead of the original buffer
- // to avoid alignment issue.
- // Here, the allocated buffer (8-byte align) can satisfy the alignment
- //
- LastRead = FALSE;
- do {
- if (WorkingBufferSize <= DataBufferSize) {
- //
- // It is the last calling to readblocks in this loop
- //
- DataBufferSize = WorkingBufferSize;
- LastRead = TRUE;
- }
-
- Status = BlockIo->ReadBlocks (
- BlockIo,
- MediaId,
- Lba,
- DataBufferSize,
- Data
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- CopyMem (WorkingBuffer, Data, DataBufferSize);
- WorkingBufferSize -= DataBufferSize;
- WorkingBuffer += DataBufferSize;
- Lba += DATA_BUFFER_BLOCK_NUM;
- } while (!LastRead);
- }
- }
-
- if (!TransactionComplete && OverRun != 0) {
- //
- // Last read is not a complete block.
- //
- Status = BlockIo->ReadBlocks (
- BlockIo,
- MediaId,
- OverRunLba,
- BlockSize,
- Data
- );
-
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- CopyMem (WorkingBuffer, Data, OverRun);
- }
-
-Done:
- if (PreData != NULL) {
- gBS->FreePool (PreData);
- }
-
- return Status;
-}
-
-EFI_STATUS
-EFIAPI
-DiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Offset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- )
-/*++
-
- Routine Description:
- Read BufferSize bytes from Offset into Buffer.
-
- Writes may require a read modify write to support writes that are not
- aligned on sector boundaries. There are three cases:
-
- UnderRun - The first byte is not on a sector boundary or the write request
- is less than a sector in length. Read modify write is required.
-
- Aligned - A write of N contiguous sectors.
-
- OverRun - The last byte is not on a sector boundary. Read modified write
- required.
-
- Arguments:
- This - Protocol instance pointer.
- MediaId - Id of the media, changes every time the media is replaced.
- Offset - The starting byte offset to read from.
- BufferSize - Size of Buffer.
- Buffer - Buffer containing read data.
-
- Returns:
- EFI_SUCCESS - The data was written correctly to the device.
- EFI_WRITE_PROTECTED - The device can not be written to.
- EFI_DEVICE_ERROR - The device reported an error while performing the write.
- EFI_NO_MEDIA - There is no media in the device.
- EFI_MEDIA_CHNAGED - The MediaId does not matched the current device.
- EFI_INVALID_PARAMETER - The write request contains device addresses that are not
- valid for the device.
- EFI_OUT_OF_RESOURCES
-
---*/
-{
- EFI_STATUS Status;
- DISK_IO_PRIVATE_DATA *Private;
- EFI_BLOCK_IO_PROTOCOL *BlockIo;
- EFI_BLOCK_IO_MEDIA *Media;
- UINT32 BlockSize;
- UINT64 Lba;
- UINT64 OverRunLba;
- UINT32 UnderRun;
- UINT32 OverRun;
- BOOLEAN TransactionComplete;
- UINTN WorkingBufferSize;
- UINT8 *WorkingBuffer;
- UINTN Length;
- UINT8 *Data;
- UINT8 *PreData;
- UINTN IsBufferAligned;
- UINTN DataBufferSize;
- BOOLEAN LastWrite;
-
- DEBUG ((EFI_D_ERROR, "DiskIoWriteDisk\n"));
-
- Private = DISK_IO_PRIVATE_DATA_FROM_THIS (This);
-
- BlockIo = Private->BlockIo;
- Media = BlockIo->Media;
- BlockSize = Media->BlockSize;
-
- if (Media->ReadOnly) {
- return EFI_WRITE_PROTECTED;
- }
-
- if (Media->MediaId != MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- DataBufferSize = BlockSize * DATA_BUFFER_BLOCK_NUM;
-
- if (Media->IoAlign > 1) {
- PreData = AllocatePool (DataBufferSize + Media->IoAlign);
- Data = PreData - ((UINTN) PreData & (Media->IoAlign - 1)) + Media->IoAlign;
- } else {
- PreData = AllocatePool (DataBufferSize);
- Data = PreData;
- }
-
- if (PreData == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- WorkingBuffer = Buffer;
- WorkingBufferSize = BufferSize;
-
- Lba = DivU64x32Remainder (Offset, BlockSize, &UnderRun);
-
- Length = BlockSize - UnderRun;
- TransactionComplete = FALSE;
-
- Status = EFI_SUCCESS;
- if (UnderRun != 0) {
- //
- // Offset starts in the middle of an Lba, so do read modify write.
- //
- Status = BlockIo->ReadBlocks (
- BlockIo,
- MediaId,
- Lba,
- BlockSize,
- Data
- );
-
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- if (Length > BufferSize) {
- Length = BufferSize;
- TransactionComplete = TRUE;
- }
-
- CopyMem (Data + UnderRun, WorkingBuffer, Length);
-
- Status = BlockIo->WriteBlocks (
- BlockIo,
- MediaId,
- Lba,
- BlockSize,
- Data
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- WorkingBuffer += Length;
- WorkingBufferSize -= Length;
- if (WorkingBufferSize == 0) {
- goto Done;
- }
-
- Lba += 1;
- }
-
- OverRunLba = Lba + DivU64x32Remainder (WorkingBufferSize, BlockSize, &OverRun);
-
- if (!TransactionComplete && WorkingBufferSize >= BlockSize) {
- //
- // If the DiskIo maps directly to a BlockIo device do the write.
- //
- if (OverRun != 0) {
- WorkingBufferSize -= OverRun;
- }
- //
- // Check buffer alignment
- //
- IsBufferAligned = (UINTN) WorkingBuffer & (UINTN) (Media->IoAlign - 1);
-
- if (Media->IoAlign <= 1 || IsBufferAligned == 0) {
- //
- // Alignment is satisfied, so write them together
- //
- Status = BlockIo->WriteBlocks (
- BlockIo,
- MediaId,
- Lba,
- WorkingBufferSize,
- WorkingBuffer
- );
-
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- WorkingBuffer += WorkingBufferSize;
-
- } else {
- //
- // The buffer parameter is not aligned with the request
- // So use the allocated instead.
- // It can fit almost all the cases.
- //
- LastWrite = FALSE;
- do {
- if (WorkingBufferSize <= DataBufferSize) {
- //
- // It is the last calling to writeblocks in this loop
- //
- DataBufferSize = WorkingBufferSize;
- LastWrite = TRUE;
- }
-
- CopyMem (Data, WorkingBuffer, DataBufferSize);
- Status = BlockIo->WriteBlocks (
- BlockIo,
- MediaId,
- Lba,
- DataBufferSize,
- Data
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- WorkingBufferSize -= DataBufferSize;
- WorkingBuffer += DataBufferSize;
- Lba += DATA_BUFFER_BLOCK_NUM;
- } while (!LastWrite);
- }
- }
-
- if (!TransactionComplete && OverRun != 0) {
- //
- // Last bit is not a complete block, so do a read modify write.
- //
- Status = BlockIo->ReadBlocks (
- BlockIo,
- MediaId,
- OverRunLba,
- BlockSize,
- Data
- );
-
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- CopyMem (Data, WorkingBuffer, OverRun);
-
- Status = BlockIo->WriteBlocks (
- BlockIo,
- MediaId,
- OverRunLba,
- BlockSize,
- Data
- );
- if (EFI_ERROR (Status)) {
- goto Done;
- }
- }
-
-Done:
- if (PreData != NULL) {
- gBS->FreePool (PreData);
- }
-
- return Status;
-}
+/*++ + +Copyright (c) 2006, Intel Corporation +All rights reserved. This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +Module Name: + + DiskIo.c + +Abstract: + + DiskIo driver that layers it's self on every Block IO protocol in the system. + DiskIo converts a block oriented device to a byte oriented device. + + ReadDisk may have to do reads that are not aligned on sector boundaries. + There are three cases: + + UnderRun - The first byte is not on a sector boundary or the read request is + less than a sector in length. + + Aligned - A read of N contiguous sectors. + + OverRun - The last byte is not on a sector boundary. + +--*/ + +#include "DiskIo.h" + +// +// Prototypes +// Driver model protocol interface +// +EFI_STATUS +EFIAPI +DiskIoDriverBindingSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ); + +EFI_STATUS +EFIAPI +DiskIoDriverBindingStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ); + +EFI_STATUS +EFIAPI +DiskIoDriverBindingStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer + ); + +// +// Disk I/O Protocol Interface +// +EFI_STATUS +EFIAPI +DiskIoReadDisk ( + IN EFI_DISK_IO_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Offset, + IN UINTN BufferSize, + OUT VOID *Buffer + ); + +EFI_STATUS +EFIAPI +DiskIoWriteDisk ( + IN EFI_DISK_IO_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Offset, + IN UINTN BufferSize, + IN VOID *Buffer + ); + +EFI_DRIVER_BINDING_PROTOCOL gDiskIoDriverBinding = { + DiskIoDriverBindingSupported, + DiskIoDriverBindingStart, + DiskIoDriverBindingStop, + 0x10, + NULL, + NULL +}; + +DISK_IO_PRIVATE_DATA gDiskIoPrivateDataTemplate = { + DISK_IO_PRIVATE_DATA_SIGNATURE, + { + EFI_DISK_IO_PROTOCOL_REVISION, + DiskIoReadDisk, + DiskIoWriteDisk + }, + NULL +}; + +EFI_STATUS +EFIAPI +DiskIoDriverBindingSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ) +/*++ + + Routine Description: + Test to see if this driver supports ControllerHandle. Any ControllerHandle + than contains a BlockIo protocol can be supported. + + Arguments: + This - Protocol instance pointer. + ControllerHandle - Handle of device to test. + RemainingDevicePath - Not used. + + Returns: + EFI_SUCCESS - This driver supports this device. + EFI_ALREADY_STARTED - This driver is already running on this device. + other - This driver does not support this device. + +--*/ +{ + EFI_STATUS Status; + EFI_BLOCK_IO_PROTOCOL *BlockIo; + + // + // Open the IO Abstraction(s) needed to perform the supported test. + // + Status = gBS->OpenProtocol ( + ControllerHandle, + &gEfiBlockIoProtocolGuid, + (VOID **) &BlockIo, + This->DriverBindingHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (EFI_ERROR (Status)) { + return Status; + } + // + // Close the I/O Abstraction(s) used to perform the supported test. + // + gBS->CloseProtocol ( + ControllerHandle, + &gEfiBlockIoProtocolGuid, + This->DriverBindingHandle, + ControllerHandle + ); + return EFI_SUCCESS; +} + +EFI_STATUS +EFIAPI +DiskIoDriverBindingStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ) +/*++ + + Routine Description: + Start this driver on ControllerHandle by opening a Block IO protocol and + installing a Disk IO protocol on ControllerHandle. + + Arguments: + This - Protocol instance pointer. + ControllerHandle - Handle of device to bind driver to. + RemainingDevicePath - Not used, always produce all possible children. + + Returns: + EFI_SUCCESS - This driver is added to ControllerHandle. + EFI_ALREADY_STARTED - This driver is already running on ControllerHandle. + other - This driver does not support this device. + +--*/ +{ + EFI_STATUS Status; + DISK_IO_PRIVATE_DATA *Private; + + Private = NULL; + + // + // Connect to the Block IO interface on ControllerHandle. + // + Status = gBS->OpenProtocol ( + ControllerHandle, + &gEfiBlockIoProtocolGuid, + (VOID **) &gDiskIoPrivateDataTemplate.BlockIo, + This->DriverBindingHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (EFI_ERROR (Status)) { + return Status; + } + // + // Initialize the Disk IO device instance. + // + Private = AllocateCopyPool (sizeof (DISK_IO_PRIVATE_DATA), &gDiskIoPrivateDataTemplate); + if (Private == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto ErrorExit; + } + // + // Install protocol interfaces for the Disk IO device. + // + Status = gBS->InstallProtocolInterface ( + &ControllerHandle, + &gEfiDiskIoProtocolGuid, + EFI_NATIVE_INTERFACE, + &Private->DiskIo + ); + +ErrorExit: + if (EFI_ERROR (Status)) { + + if (Private != NULL) { + gBS->FreePool (Private); + } + + gBS->CloseProtocol ( + ControllerHandle, + &gEfiBlockIoProtocolGuid, + This->DriverBindingHandle, + ControllerHandle + ); + } + + return Status; +} + +EFI_STATUS +EFIAPI +DiskIoDriverBindingStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer + ) +/*++ + + Routine Description: + Stop this driver on ControllerHandle by removing Disk IO protocol and closing + the Block IO protocol on ControllerHandle. + + Arguments: + This - Protocol instance pointer. + ControllerHandle - Handle of device to stop driver on. + NumberOfChildren - Not used. + ChildHandleBuffer - Not used. + + Returns: + EFI_SUCCESS - This driver is removed ControllerHandle. + other - This driver was not removed from this device. + EFI_UNSUPPORTED + +--*/ +{ + EFI_STATUS Status; + EFI_DISK_IO_PROTOCOL *DiskIo; + DISK_IO_PRIVATE_DATA *Private; + + // + // Get our context back. + // + Status = gBS->OpenProtocol ( + ControllerHandle, + &gEfiDiskIoProtocolGuid, + (VOID **) &DiskIo, + This->DriverBindingHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (EFI_ERROR (Status)) { + return EFI_UNSUPPORTED; + } + + Private = DISK_IO_PRIVATE_DATA_FROM_THIS (DiskIo); + + Status = gBS->UninstallProtocolInterface ( + ControllerHandle, + &gEfiDiskIoProtocolGuid, + &Private->DiskIo + ); + if (!EFI_ERROR (Status)) { + + Status = gBS->CloseProtocol ( + ControllerHandle, + &gEfiBlockIoProtocolGuid, + This->DriverBindingHandle, + ControllerHandle + ); + } + + if (!EFI_ERROR (Status)) { + gBS->FreePool (Private); + } + + return Status; +} + +EFI_STATUS +EFIAPI +DiskIoReadDisk ( + IN EFI_DISK_IO_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Offset, + IN UINTN BufferSize, + OUT VOID *Buffer + ) +/*++ + + Routine Description: + Read BufferSize bytes from Offset into Buffer. + + Reads may support reads that are not aligned on + sector boundaries. There are three cases: + + UnderRun - The first byte is not on a sector boundary or the read request is + less than a sector in length. + + Aligned - A read of N contiguous sectors. + + OverRun - The last byte is not on a sector boundary. + + + Arguments: + This - Protocol instance pointer. + MediaId - Id of the media, changes every time the media is replaced. + Offset - The starting byte offset to read from. + BufferSize - Size of Buffer. + Buffer - Buffer containing read data. + + Returns: + EFI_SUCCESS - The data was read correctly from the device. + EFI_DEVICE_ERROR - The device reported an error while performing the read. + EFI_NO_MEDIA - There is no media in the device. + EFI_MEDIA_CHNAGED - The MediaId does not matched the current device. + EFI_INVALID_PARAMETER - The read request contains device addresses that are not + valid for the device. + EFI_OUT_OF_RESOURCES + +--*/ +{ + EFI_STATUS Status; + DISK_IO_PRIVATE_DATA *Private; + EFI_BLOCK_IO_PROTOCOL *BlockIo; + EFI_BLOCK_IO_MEDIA *Media; + UINT32 BlockSize; + UINT64 Lba; + UINT64 OverRunLba; + UINT32 UnderRun; + UINT32 OverRun; + BOOLEAN TransactionComplete; + UINTN WorkingBufferSize; + UINT8 *WorkingBuffer; + UINTN Length; + UINT8 *Data; + UINT8 *PreData; + UINTN IsBufferAligned; + UINTN DataBufferSize; + BOOLEAN LastRead; + + Private = DISK_IO_PRIVATE_DATA_FROM_THIS (This); + + BlockIo = Private->BlockIo; + Media = BlockIo->Media; + BlockSize = Media->BlockSize; + + if (Media->MediaId != MediaId) { + return EFI_MEDIA_CHANGED; + } + + WorkingBuffer = Buffer; + WorkingBufferSize = BufferSize; + + // + // Allocate a temporary buffer for operation + // + DataBufferSize = BlockSize * DATA_BUFFER_BLOCK_NUM; + + if (Media->IoAlign > 1) { + PreData = AllocatePool (DataBufferSize + Media->IoAlign); + Data = PreData - ((UINTN) PreData & (Media->IoAlign - 1)) + Media->IoAlign; + } else { + PreData = AllocatePool (DataBufferSize); + Data = PreData; + } + + if (PreData == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Lba = DivU64x32Remainder (Offset, BlockSize, &UnderRun); + + Length = BlockSize - UnderRun; + TransactionComplete = FALSE; + + Status = EFI_SUCCESS; + if (UnderRun != 0) { + // + // Offset starts in the middle of an Lba, so read the entire block. + // + Status = BlockIo->ReadBlocks ( + BlockIo, + MediaId, + Lba, + BlockSize, + Data + ); + + if (EFI_ERROR (Status)) { + goto Done; + } + + if (Length > BufferSize) { + Length = BufferSize; + TransactionComplete = TRUE; + } + + CopyMem (WorkingBuffer, Data + UnderRun, Length); + + WorkingBuffer += Length; + + WorkingBufferSize -= Length; + if (WorkingBufferSize == 0) { + goto Done; + } + + Lba += 1; + } + + OverRunLba = Lba + DivU64x32Remainder (WorkingBufferSize, BlockSize, &OverRun); + + if (!TransactionComplete && WorkingBufferSize >= BlockSize) { + // + // If the DiskIo maps directly to a BlockIo device do the read. + // + if (OverRun != 0) { + WorkingBufferSize -= OverRun; + } + // + // Check buffer alignment + // + IsBufferAligned = (UINTN) WorkingBuffer & (UINTN) (Media->IoAlign - 1); + + if (Media->IoAlign <= 1 || IsBufferAligned == 0) { + // + // Alignment is satisfied, so read them together + // + Status = BlockIo->ReadBlocks ( + BlockIo, + MediaId, + Lba, + WorkingBufferSize, + WorkingBuffer + ); + + if (EFI_ERROR (Status)) { + goto Done; + } + + WorkingBuffer += WorkingBufferSize; + + } else { + // + // Use the allocated buffer instead of the original buffer + // to avoid alignment issue. + // Here, the allocated buffer (8-byte align) can satisfy the alignment + // + LastRead = FALSE; + do { + if (WorkingBufferSize <= DataBufferSize) { + // + // It is the last calling to readblocks in this loop + // + DataBufferSize = WorkingBufferSize; + LastRead = TRUE; + } + + Status = BlockIo->ReadBlocks ( + BlockIo, + MediaId, + Lba, + DataBufferSize, + Data + ); + if (EFI_ERROR (Status)) { + goto Done; + } + + CopyMem (WorkingBuffer, Data, DataBufferSize); + WorkingBufferSize -= DataBufferSize; + WorkingBuffer += DataBufferSize; + Lba += DATA_BUFFER_BLOCK_NUM; + } while (!LastRead); + } + } + + if (!TransactionComplete && OverRun != 0) { + // + // Last read is not a complete block. + // + Status = BlockIo->ReadBlocks ( + BlockIo, + MediaId, + OverRunLba, + BlockSize, + Data + ); + + if (EFI_ERROR (Status)) { + goto Done; + } + + CopyMem (WorkingBuffer, Data, OverRun); + } + +Done: + if (PreData != NULL) { + gBS->FreePool (PreData); + } + + return Status; +} + +EFI_STATUS +EFIAPI +DiskIoWriteDisk ( + IN EFI_DISK_IO_PROTOCOL *This, + IN UINT32 MediaId, + IN UINT64 Offset, + IN UINTN BufferSize, + IN VOID *Buffer + ) +/*++ + + Routine Description: + Read BufferSize bytes from Offset into Buffer. + + Writes may require a read modify write to support writes that are not + aligned on sector boundaries. There are three cases: + + UnderRun - The first byte is not on a sector boundary or the write request + is less than a sector in length. Read modify write is required. + + Aligned - A write of N contiguous sectors. + + OverRun - The last byte is not on a sector boundary. Read modified write + required. + + Arguments: + This - Protocol instance pointer. + MediaId - Id of the media, changes every time the media is replaced. + Offset - The starting byte offset to read from. + BufferSize - Size of Buffer. + Buffer - Buffer containing read data. + + Returns: + EFI_SUCCESS - The data was written correctly to the device. + EFI_WRITE_PROTECTED - The device can not be written to. + EFI_DEVICE_ERROR - The device reported an error while performing the write. + EFI_NO_MEDIA - There is no media in the device. + EFI_MEDIA_CHNAGED - The MediaId does not matched the current device. + EFI_INVALID_PARAMETER - The write request contains device addresses that are not + valid for the device. + EFI_OUT_OF_RESOURCES + +--*/ +{ + EFI_STATUS Status; + DISK_IO_PRIVATE_DATA *Private; + EFI_BLOCK_IO_PROTOCOL *BlockIo; + EFI_BLOCK_IO_MEDIA *Media; + UINT32 BlockSize; + UINT64 Lba; + UINT64 OverRunLba; + UINT32 UnderRun; + UINT32 OverRun; + BOOLEAN TransactionComplete; + UINTN WorkingBufferSize; + UINT8 *WorkingBuffer; + UINTN Length; + UINT8 *Data; + UINT8 *PreData; + UINTN IsBufferAligned; + UINTN DataBufferSize; + BOOLEAN LastWrite; + + Private = DISK_IO_PRIVATE_DATA_FROM_THIS (This); + + BlockIo = Private->BlockIo; + Media = BlockIo->Media; + BlockSize = Media->BlockSize; + + if (Media->ReadOnly) { + return EFI_WRITE_PROTECTED; + } + + if (Media->MediaId != MediaId) { + return EFI_MEDIA_CHANGED; + } + + DataBufferSize = BlockSize * DATA_BUFFER_BLOCK_NUM; + + if (Media->IoAlign > 1) { + PreData = AllocatePool (DataBufferSize + Media->IoAlign); + Data = PreData - ((UINTN) PreData & (Media->IoAlign - 1)) + Media->IoAlign; + } else { + PreData = AllocatePool (DataBufferSize); + Data = PreData; + } + + if (PreData == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + WorkingBuffer = Buffer; + WorkingBufferSize = BufferSize; + + Lba = DivU64x32Remainder (Offset, BlockSize, &UnderRun); + + Length = BlockSize - UnderRun; + TransactionComplete = FALSE; + + Status = EFI_SUCCESS; + if (UnderRun != 0) { + // + // Offset starts in the middle of an Lba, so do read modify write. + // + Status = BlockIo->ReadBlocks ( + BlockIo, + MediaId, + Lba, + BlockSize, + Data + ); + + if (EFI_ERROR (Status)) { + goto Done; + } + + if (Length > BufferSize) { + Length = BufferSize; + TransactionComplete = TRUE; + } + + CopyMem (Data + UnderRun, WorkingBuffer, Length); + + Status = BlockIo->WriteBlocks ( + BlockIo, + MediaId, + Lba, + BlockSize, + Data + ); + if (EFI_ERROR (Status)) { + goto Done; + } + + WorkingBuffer += Length; + WorkingBufferSize -= Length; + if (WorkingBufferSize == 0) { + goto Done; + } + + Lba += 1; + } + + OverRunLba = Lba + DivU64x32Remainder (WorkingBufferSize, BlockSize, &OverRun); + + if (!TransactionComplete && WorkingBufferSize >= BlockSize) { + // + // If the DiskIo maps directly to a BlockIo device do the write. + // + if (OverRun != 0) { + WorkingBufferSize -= OverRun; + } + // + // Check buffer alignment + // + IsBufferAligned = (UINTN) WorkingBuffer & (UINTN) (Media->IoAlign - 1); + + if (Media->IoAlign <= 1 || IsBufferAligned == 0) { + // + // Alignment is satisfied, so write them together + // + Status = BlockIo->WriteBlocks ( + BlockIo, + MediaId, + Lba, + WorkingBufferSize, + WorkingBuffer + ); + + if (EFI_ERROR (Status)) { + goto Done; + } + + WorkingBuffer += WorkingBufferSize; + + } else { + // + // The buffer parameter is not aligned with the request + // So use the allocated instead. + // It can fit almost all the cases. + // + LastWrite = FALSE; + do { + if (WorkingBufferSize <= DataBufferSize) { + // + // It is the last calling to writeblocks in this loop + // + DataBufferSize = WorkingBufferSize; + LastWrite = TRUE; + } + + CopyMem (Data, WorkingBuffer, DataBufferSize); + Status = BlockIo->WriteBlocks ( + BlockIo, + MediaId, + Lba, + DataBufferSize, + Data + ); + if (EFI_ERROR (Status)) { + goto Done; + } + + WorkingBufferSize -= DataBufferSize; + WorkingBuffer += DataBufferSize; + Lba += DATA_BUFFER_BLOCK_NUM; + } while (!LastWrite); + } + } + + if (!TransactionComplete && OverRun != 0) { + // + // Last bit is not a complete block, so do a read modify write. + // + Status = BlockIo->ReadBlocks ( + BlockIo, + MediaId, + OverRunLba, + BlockSize, + Data + ); + + if (EFI_ERROR (Status)) { + goto Done; + } + + CopyMem (Data, WorkingBuffer, OverRun); + + Status = BlockIo->WriteBlocks ( + BlockIo, + MediaId, + OverRunLba, + BlockSize, + Data + ); + if (EFI_ERROR (Status)) { + goto Done; + } + } + +Done: + if (PreData != NULL) { + gBS->FreePool (PreData); + } + + return Status; +} |